Providing and applying painting and other miscellaneous work at Damanwada Panchayat, Moti Daman.

Items :

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work .

Distempering (two coat) with oil bound distemper of approved brand and manufacture and of required shade on wall surface to give an even shade over and manufacture after thoroughly brushing the surface free from mirtar dropping and other foreign matter and also excluding preparing the surface even and sand papered smooth with asian paints distenper as directed by engineer-in-charge.

Finishing wall with Apex exterior paint on wall surface (two coats) including one coats of primer to give an approved brand and manufactures and of required shape even shade after thoroughly brushing the surface to as Directed by Engineer incharge.

Painting Two coats oil paint and wood based surface with enamel paint interior to give and even shade including cleaning the surface of all dirt and other foreign matter sand papering and stopping as Directed by Engineer-in-charge.

Supply and apply of Asian paints smartcare Damp proof single component fibre reinforced acrylyc coating. The coating must be applied in three coats with first coat at 33% disllution and the remaining two coats without dillution for priming coat , no additional primer is allowed. The coating should be white in colour and shall also have anticarbonation property with waterproofing protectionup to 7 bars hydrostatic pressure as Directed by Engineering-in-charge.

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(A) Modular .

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand).

Removal of fixed paver block else directed by engineer in charge .

Refixing of the paver block cleaning, in line and level with proper camber incl transportation, as directed by Engineer-in-charge.

Removing old Shed as directed by Engineer-in-charge.

Refixing old Shed including the transportation , as directed by Engineer-in-charge.

Removing dry oil bound distemper by washing and scrapping and send preparing the on ceiling and sloping roofs including necessary repairs to scratches complete

Painting two coats oil paint and wood based surface with enamel paint interior to give and even shade including cleaning the surface of all dirt and other foreign matter sand peppering and stopping as directed by engineer-in-charge

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(D) Soft rock not requiring Blasting .

Filling in foundation and plinth with rubble stones in layer of 20 cm. thickness including watering ramming and consolidating etc. comp.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth.

Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass.

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window.

Providing and Laying granite slab 18-20 mm(Average) thick for sill and jambs of door, window, ventilators, openings, elevation cutouts, compound wall, cladding, partition, etc as per design and drawings including full molded round both edge on 10 mm thick cement motor 1:3(1- cement : 3 course sand) jointed with cement slurry including rubbing and polishing et complete .

Providing and fixing 38 M thick single shutter flush doors using teak wood frame having BWP shutter with both side decorative laminated fixed with waterproof adhesives having pattern and brand as approved by architect, with stainless steel handle tower bolt and having stainless steel Aldrop including fixing all other accessories of approved brand as per detail drawing as directed by engineer-in-charge.

Constructing sandwitch platform of 18 MM thick polished black granite at top and 30 mm thick kota stone slab flooring fitting at bottom with cementing material / adhesive including making necessary grooves in walls including all labor material of approved quality including full molded round front edge fixed in wall for portition and jointed with Gray cement slurry including rubbing and polishing etc complete.

Providing and Fixing MS plate 0.15x0.15x5mm as directed by Engineer-in-charge.

Providing and Fixing 50mt Three core wire 2.5mm as directed by Engineer-in-charge.

Providing and Fixing Modular Surface board as directed by Engineer-in-charge.

Providing and Fixing 16amp Shocket & Switch as directed by Engineer-in-charge.

Providing and Fixing Casing Patti as directed by Engineer-in-charge.

Providing and Fixing Regulator as directed by Engineer-in-charge.

Providing and Fixing 1.5 mm Flexible wire, 1 coil as directed by Engineer-in-charge.

Providing and Fixing Regular Aluminium Automatic universal Hydraulic Dooe closer for home and office upto 60 kg suitable for steel, wooden, iron Aluminium Doors as directed by Engineer-in-charge.

Repairing of Aluminium Window as directed by Engineer-in-charge.

PRADIMAL FAKIRBHAI PATEL (BID ID -9531)