Renovation of SFSF toilets, BARCF, Kalpakkam

Amount

Dismantling tile work (thickness of tile upto 25mm) i+B5:B26n floors and walls laid in cement mortar at all levels including stacking material within 50 metres lead complete all as per specifications and directed by the Engineer-in-Charge.

Conveying the surplus tiles & debris, boulders and spoil by mechanical means and depositing at places inside DAE installation identified as Dumping yard as per requirement with a lead specified below including loading, unloading, breaking clods, leveling all complete as per specification and as directed by the Engineer-in-Charge. Note: 1) The rates in respect of this item are applicable for the NET Quantities arrived at after making deductions for voids @ 20% in respect of soil and @ 50% in respect of Rock from the corresponding stack / truck measurements. 2) The earth shall be dumped well inside the Dumping yard and not over approach pathway road. Lead charges for lead Exceeding 4 kilometre but not exceeding 5 kilometre.

Providing and fixing VITRIFIED tiles in different sizes with water absorption less that 0.08% and confirming to IS 15622 of make kajaria (Grey Matt finish - 6605) (as required by Engineer-in-charge) laid over a bed of minimum 20mm thick bed of cement mortar 1:4 (inskirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3) including machine / hand cutting to required size & shape, grouting the joints with white cement mixed with colouring pigment to match colour of tile patterns, curing, cleaning the surface neatly at the time of handing over the area complete all as per drawings and specifications. Note: The sample tile shall be got approved by the Architect/Engineer before procurement. Inflooring, tile size of 600x600mm fixing with 20mm thick bedding in cement mortar 1:4.

Providing and fixing VITRIFIED tiles in different sizes with water absorption less that 0.08% and confirming to IS 15622 of make kajaria (Grey Matt finish - 6605) (as required by Engineer-in-charge) laid over a bed of minimum 20mm thick bed of cement mortar 1:4 (inskirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3) including machine / hand cutting to required size & shape, grouting the joints with white cement mixed with colouring pigment to match colour of tile patterns, curing, cleaning the surface neatly at the time of handing over the area complete all as per drawings and specifications. Note: The sample tile shall be got approved by the Architect/Engineer before procurement. In Dados and skirting laid over 12mm thick backing in cement mortar 1:3.

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. (Size of Tile: 600x600mm)

Providing and fixing PVC corner beading / nosing of approved quality and colour at the corners and edges of the ceramic tiles dadooing including finishing and embedding in the wall etc. complete all as directed by the Engineer-in-charge.

Providing and fixing White Vitreous Indian water closet of Orissa pattern W.C. pan of size 580x440mm of parryware (C01111C) or other equivalent make with integral type foot rest with 100mm China wate P or S trap, One no. 10 litre High level or low level white PVC flushing cistern (E80901C) with flush pipe & bend with manually controlled device (handle lever) conforming to IS: 7231, angl cock (T9926A1) and PVC 15mm inlet connection (T991299) , embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed at site.

Providing and fixing Parryware (C02881C) Cascade Canterbury or Aravalirange or equivalent water closet suite of 'Magenta or Hazel Hue' or approved colour, Floor mounted Europen closet with seat cover (E83091C) and concealed flush valve (T3302A1) and conversion bend provided for 'S' trap, flushing etc. complete all as directed by the Engineer-in-Charge.

Providing and fixing in position approved make 325X558mm size Vitreous chinaware urinal Roca chic Top inlet model RS35945L460 comprising of :(i) concealed Push angle auto closing valve of parryware make lapis N G2007A1.(ii) C.P connector of size upto 300 to 450mm, complete all as per specifications and as directed by EIC.

Providing and fixing of frosted urinal partition glass 8mm thickness in between two urinal sets, complete all as per specifications and as directed by EIC.

Providing and fixing in position Vitreous China wash basin with semi pedestal comprising: i) white glazed vitreous China ware wash hand basin of size 635x510mm of PARRYWARE make CO41X1C with a pair of suitable cast iron brackets painted, ii) 32mm heavy quality C.P.brass waste coupling of 'Parryware T9911A1' make with rubber plug, CP ball chain, washer, checknuts. iii) 15mm heavy quality C.P.brass pillar cock make 'Parryware G0202A1 with Aerator ' make. iv) 32mm heavy quality C.P.brass 'p' trap Plumber or equivalent make self cleaning design & 50mm dia PVC waste pipe upto Nahani trap. v)15mm dia. PVC inlet connection of length not exceeding 450mm, Parryware make with ISI mark including required brass checknuts and washer. vi) 15mm C.P.brass angle cock without pipe 'Parryware T9926A1 make and suitable SS valve/cup vii) semi pedestal of parryware make CO3201C complete all as per specifications and as directed by the Engineer-in-Charge. Note: l) Tenderer shall note that the cost quoted shall be inclusive of all material like wash basin, semi pedestal, waste coupling, pillar cock, angle cock, pvc connection, traps and nails, screw and plugs which are necessary for fixing and cost of labour. ll)All the above items for quality, colour and make shall be got approved before making bulk order.

Providing and fixing 5mm thick first quality mirror of required size anodized aluminium section frame work of size 30x20mm, backing the mirror with 4mm thick AC plain sheet painting two coats of plastic emulsion paint over a coat of primer, fixing the entire unit on the wall surface with necessary screws etc. complete all as directed by the Engineer-in-charge.

Providing and fixing Heavy Quality C.P. Brass 15mm dia Bib cock "Parryware model G0204A1" as per specifications and as directed by the EIC (samples to be got approved by the EIC).

Providing and fixing Heavy Quality C.P. Brass 15mm dia Two way Bib cock "Parryware model G021ZA1" as per specifications and as directed by the EIC (samples to be got approved by the EIC).

Providing and fixing Heavy Quality 15mm nominal bore C.P. Brass Angle cock "Parryware model T9926A1" for wash basin inlet/flush cistern etc. as per specifications and as directed by the EIC (samples to be got approved by the EIC)

Providing and fixing liquid soap dispenser "Parryware (T6513A1)" or approved equivalent make with all accessories and CP brackets including necessary screws for fixing complete all as directed by the Engineer-in-charge.

Providing and fixing Heavy Quality 15mm dia. C.P. Foot operated valve with CP Spout and 1metre PVC connection hose "Prayag / Jass or other equivalent make" as per specifications and as directed by the EIC (samples to be got approved by the EIC).

Providing and fixing Heavy Quality C.P Brass Health Faucet with 1.50 metres flexible hose (Hand Showner) of 'Jaquar continental model' or approved equivalent make and type as per specifications and as directed b the Engineer-in-charge. (Samples to be got approved by the Engineer-in-charge).

Providing and fixing Cast Iron Nahani Trap/ Floor Trap of 100mm inlet and 75mm outlet, (weighing 5.80 kgs each), jointing with Lead with the connection pipes, placing as per the drawings, including embedding in cement concrete 1:2:4 and making circular hole up to floor level using 110mm O/D PVC pipes of 6 kgs/sq.cm pressure and fixing 1 No 125mm dia C.P Brass Granting, complete all as specifications and drawings and as directed by the Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (25mm (1") nominal dia. Pipes).

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (40mm (1 1/2") mm nominal dia Pipes).

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (50mm (2") mm nominal dia Pipes).

Providing and fixing the following sizes of 'LEADER' make gun full way gate valves female ends screwed bonnet integral seat non raising spindle class I, ISI marked to IS: 778 tested to 20kg/sq.cm hydraulic pressure etc., complete all as per specification and as directed by the Engineer-in-charge (25 mm nominal bore)

Providing and fixing the following sizes of 'LEADER' make gun full way gate valves female ends screwed bonnet integral seat non raising spindle class I, ISI marked to IS: 778 tested to 20kg/sq.cm hydraulic pressure etc., complete all as per specification and as directed by the Engineer-in-charge (40 mm nominal bore)

Providing and fixing the following sizes of 'LEADER' make gun full way gate valves female ends screwed bonnet integral seat non raising spindle class I, ISI marked to IS: 778 tested to 20kg/sq.cm hydraulic pressure etc., complete all as per specification and as directed by the Engineer-in-charge (50 mm nominal bore)

Providing and laying the following sizes PVC water supply line with 'Finolex/ Varun/ Truebore,or approved equivalent make PVC pipes suitable for 6 Kg/sq.cm pressure and specials confirming & marked to IS:4985 including jointing with PVC jointing compound,laying and fixing the pipes in the excavated trenches, cost of all types of specials such as tees, reduces,coupler, reducing bushes, threaded adaptor,elbow, tall pieces, caps etc. and testing the line as directed by the Engineer-in-charge(90 mm outer dia PVC pipe)

Providing and laying the following sizes PVC water supply line with 'Finolex/ Varun/ Truebore,or approved equivalent make PVC pipes suitable for 6 Kg/sq.cm pressure and specials confirming & marked to IS:4985 including jointing with PVC jointing compound,laying and fixing the pipes in the excavated trenches, cost of all types of specials such as tees, reduces,coupler, reducing bushes, threaded adaptor,elbow, tall pieces, caps etc. and testing the line as directed by the Engineer-in-charge(110 mm outer dia PVC pipe)

Supplying and fixing in position single leaf, factory made PVC Rigid foam panel door frame and shutter of FOREX or approved equivalent make of approved colour and size as required, with 19X19mm MS Square Tube of 19 guage alround, covered with 5mm thick heat moulded PVC channel of 50mm width for styles and covered with 5mm thick PVC sheet for top and bottom rails. The lockrail shall be 50mm wide and 25mm thick. The inner panel shall be inserted in the frame with 5mm thick PVC rigid foam sheet, glued to the styles and rails with solvent cement along with 5X25mm PVC beading on both sides of the shutter. The vertical tubes should be filled with hardwood piece to improve the screw holding capacity. PVC door frame of the size 50X47mm with a wall thickness of 5mm, made out 5mm rigid PVC foam sheet mitter cut at two corner and joined with 2nos. of PVC 'L' brackets of 18mm square in the size of 100X100mm. The PVC door frame is reinforced with 19X19mm M.S.Square tube of 19 guage. The frame to be fixed to the wall by drilling 100mm long steel screws by using PVC fasteners and the rate includes supplying and fixing of foloowing door fitting for each door with steel screws of 3nos. of 100mm long SS butt hinges GARG brand, 1no. Aluminium tower bolt, 1no.Baby latch, 2nos.Aluminium D handle (100mm inner to inner) and 1no. 150mm/6" long Aluminium aldrop JHAL/CLASSIC brand or equivalent. (Note: As per door opening measurement in sq.m will be paid ) the door frames shall be fabricated only after taking actual measurement at location complete as per specification and as directed by EIC.

Providing, fabricating, supplying & fixing factory made Honey combed metal flush single/double door of "steeltech/sen harvic" make consisting of 1.6mm galvanised pressed steel frame of size 105X57mm with suitable stiffners and 0.8mm prime quality galvanised pressed steel shutter, 35mm thick door shutter with bottom ventilator panel with levor, necessary stiffners for hardware, with applying a coat of two pack epoxy primer and two coats polyurathene paint and check for correctness of recesses and stiffening plates for all fitings & fixtures etc., the rate includes providing & fixing Aluminium fittings & fixtures, heavy duty stainless steel hinges/pivot hinge 4nos. each shutter and locking arrangements with screws, filling of 1:2:4 concrete door frame etc., complete all as per specification and as directed by EIC. Note: detail of fittings and fixtures 1no. Aluminium aldrops 200mm long, 2nos.of Aluminium tower bolt200mm long, 2nos. of Aluminium handles 150mm long, 1no. heavy duty door stopper, 1no. 50mm dia. PVC door buffer and make provision for fixing hydraulic door closer with door shutter.

Carrying out day to day activities in various areas related to plumbing maintenance works like repairing of damaged water supply, sewage line, removing and rectification, replacing and refixing sanitary installations and attending any breakdown/emergency complaints to maintain services etc. all as per specifications and as directed by Engineer-in-Charge.

Carrying out day to day activities in various areas related to Carpenter maintenance works like repairing of wood utilities, removing and rectification, replacing and refixing flush door and attending any breakdown/emergency complaints to maintain services etc. all as per specifications and as directed by Engineer-in-Charge.

Providing and applying painting Two coats at all levels with premium Plastic emulsion paint (Asian or Equivalent approved brand and manufacturer) to give an even shade including one under coat of cement primer, applying putty, preparation of the surface, scaffolding complete all as per specifications and as directed by the Engineer-in-charge.

P KUMAR CONTRACTOR