Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.0 CrAdmitted-Finance | ₹23.0 Cr | L1 | Admitted-Finance |
| 2 | L2₹24.4 CrAdmitted-Finance 5037 5038 URBAN ESTATE PH 1 PATIALA 147002 PUNJAB | PATIALA | PATIALA | PUNJAB | 147002 | ₹24.4 Cr | L2 | Admitted-Finance |
| 3 | L3₹25.2 CrAdmitted-Finance | ₹25.2 Cr | L3 | Admitted-Finance |
| 4 | L4₹25.2 CrAdmitted-Finance | ₹25.2 Cr | L4 | Admitted-Finance |
| 5 | L5₹25.7 CrAdmitted-Finance | ₹25.7 Cr | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s. Lakhbir constructions L1 | Sant Construction Co. L2 | M/s Jatindra Construction Company L3 | M/s Madan Lal Bansal and Co. Contractors Pvt. Ltd. L4 | Beant Construction Co Pvt Ltd L5 | NAFREF ENGINEERS PVT LTD L6 | Rahul Construction India Pvt Ltd L7 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00Note: (i) Please refer Schedule 'A' Notes given on serial page No. 28, 29, 30(R), 31(R), 32 of tender documents. (ii) Item from Srl No. 3.00 to 9.01 of this document shall be Part-XII (Miscellaneous items) of BOQ. | ||||||||||
| 2.00LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS | ||||||||||
| 2.01 | Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule 'A' Part-I brought forward from serial page No. 33(R). | 1 | Each | - | - | - | - | - | - | - |
| 2.02 | Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-II brought forward from serial page No. 34(R). | 1 | Each | - | - | - | - | - | - | - |
| 2.03 | Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-III brought forward from serial page No. 35(R). | 1 | Each | - | - | - | - | - | - | - |
| 2.04 | Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule 'A' Part-IV brought forward from serial page No. 36. | 1 | Each | - | - | - | - | - | - | - |
| 2.05 | Lump sum price worked out by the contractor for ROAD AND PATH WORKS as listed in Schedule 'A' Part-V brought forward from serial page No. 37. | 1 | Each | - | - | - | - | - | - | - |
| 2.06 | Lump sum price worked out by the contractor for AREA DRAINAGE WORKS listed in Schedule 'A' Part-VI brought forward from serial page No. 38(R). | 1 | Each | - | - | - | - | - | - | - |
| 2.07 | Lump sum price worked out by the contractor for RAIN WATER HARVESTING WORKS listed in Schedule 'A' Part-VII brought forward from serial page No. 39(R). | 1 | Each | - | - | - | - | - | - | - |
| 2.08 | Lump sum price worked out by the contractor for SITE CLEARANCE AND EARTH WORKS as listed in Schedule 'A' Part-VIII brought forward from serial page No. 40(R). | 1 | Each | - | - | - | - | - | - | - |
Tender Value
₹19.8 Cr
EMD Value
₹13.2 L
Closing Date
24 Jun 2020, 6:00 pmClosed
HQ Chief Engineer Jalandhar Zone Jalandhar Cantt
HQ Chief Engineer Jalandhar Zone Jalandhar Cantt
PROVN OF STORAGE SHED ALONGWITH ALLIED INFRASTRUCTURE AT BADDOWAL UNDER GE LUDHIANA
2018_MES_187080_1
80965/E8
Open Tender
Civil Works
760 days
Jalandhar Cantt
All documents as per NIT
8 documents required · 8 mandatory
₹3,000
GE Ludhiana
₹13.2 L
Yes
30 Jun 2020
11 Mar 2020
26 Jun 2020
11 Mar 2020
24 Jun 2020
27 May 2020
11 Mar 2020 - 17 Jun 2020
Amount
Note: (i) Please refer Schedule 'A' Notes given on serial page No. 28, 29, 30(R), 31(R), 32 of tender documents. (ii) Item from Srl No. 3.00 to 9.01 of this document shall be Part-XII (Miscellaneous items) of BOQ.
LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS
Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule 'A' Part-I brought forward from serial page No. 33(R).
Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-II brought forward from serial page No. 34(R).
Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-III brought forward from serial page No. 35(R).
Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule 'A' Part-IV brought forward from serial page No. 36.
Lump sum price worked out by the contractor for ROAD AND PATH WORKS as listed in Schedule 'A' Part-V brought forward from serial page No. 37.
Lump sum price worked out by the contractor for AREA DRAINAGE WORKS listed in Schedule 'A' Part-VI brought forward from serial page No. 38(R).
Lump sum price worked out by the contractor for RAIN WATER HARVESTING WORKS listed in Schedule 'A' Part-VII brought forward from serial page No. 39(R).
Lump sum price worked out by the contractor for SITE CLEARANCE AND EARTH WORKS as listed in Schedule 'A' Part-VIII brought forward from serial page No. 40(R).
Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-IX brought forward from serial page No. 41(R).
Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-X brought forward from serial page No. 42(R).
Lump sum price worked out by the contractor for LIGHTENING PROTECTION WORKS as listed in Schedule 'A' Part-XI brought forward from serial page No. 43(R).
INTERNAL ELECTRIFICATION WORKS
Material and labour for concealed point wiring complete with 1.5 sqmm (nominal cross sectional area) FRLS PVC insulated multi-stranded copper conductor in and including heavy duty PVC conduit pipe (ISI marked) including fittings & accessories including MS concealed terminal boxes with 3mm thick plastic laminated bakelite (Hylum) sheet top cover for mounting switch socket etc including 1.5 sqmm FRLS PVC copper conductor multi-stranded as earth wire connected to the common earth dolly as specified for one light point/fan point/bell point controlled by one switch complete all as specified and directed.
All as per item No. 3.01 above but one three pin socket outlet 5 Amp on same board.
All as per item No. 3.01 above but one three pin socket outlet 5 Amp on independent board.
Material and labour for point wiring complete two light point controlled by one FLP switch with 1100 volts grade PVC insulated unsheathed cable of copper conductor FRLS, multistranded of size 1.5 sqmm single core, including ERW 16 gauge heavy duty condiut, of suitable size (not less than 20mm dia) with accessories like FLP bend, union, junction box, FLP flexible conduit duly approved by CMRI Dhanbad inlcuding continous earth wire of size 1.5 sqmm PVC copper conductor insulated, unsheathed, stranded (Green colour) connected to common earth dolly complete all as specified and directed. Make : Sudhir/ Havells/ Polycab Note:- FLP junction boxes/Bend/Elbow/Unions will be measured & paid separately.
Supply and fixing batten holder insulated body including LED lamp 10 W 220-240 volts, 6500K, B-22 base cap complete all as specified and directed.
Supply and fixing ceiling fan 1200mm sweep BEE 5 star rated including provision of cord flexible copper conductor 23/0.0076 three core from ceiling rose to connector complete all as specified and directed.
Supply and fixing exhaust fan heavy duty steel body with louvers complete of 300mm size with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan for giving connection complete all as specified and directed. Note: Cost of opening in wall and grouting of mild steel work shall be deemed included in the lump sum cost of the building.
Supply and fixing for energy saving tube light luminaires with diffuser LED comprising with CRCA MS box and for fit 18 to 20 watt (max) retro fit tube rod having thermally conductive material heat sink, lumen output 2100 lumens (min) 6500K, power factor more than 0.95, IP 20 class-I protection with inbuilt LED driver surge protection device, operative on 140-270 volts AC supply complete pre-wired, connection and testing complete all as specified and directed.
Supply and fixing for energy saving and environmental friendly long life versatile pressure die cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 30 watt LED for bldg security light with high efficiency electronic driver, having IP-65 protection, surge protection device, power factor more than 0.9 complete operative on AC supply 140-270 volts pre wired and product should be made in India only complete all as specified and directed.
Supply and fixing flame proof and weather proof LED light fitting 1 x 20 watt made of aluminium cast alloy LM-6, inside and outside light grey epoxy coating, prewired complete with spring loaded rotor type lamp holder and connector block etc complete with flame proof gear box all accessories fixed on wall with suitable metallic fixtures of suitable size and necessary glands etc connecting up complete with flexible steel conduit with flame proof cable entry glands all as specified and directed. Note :- Flexible steel conduit will be measured and paid separately.
Supply and fixing MCB, SPN 240 volts, capacity 6 - 32 Amps, C series 50 Hz, 10 KA complete all as specified and directed.
Supply and fixing MCB, single pole 240 volts, capacity 6 - 32 Amps, C series 50 Hz, 10 KA complete all as specified and directed.
Supply and fixing flame proof bend suitable for 20mm dia ERW conduit complete all as specified and directed.
Supply and fixing flame proof bend suitable for 25mm dia ERW conduit complete all as specified and directed.
Supply and fixing flame proof Junction box suitable for 20mm dia ERW conduit of 2 way complete all as specified and directed.
Supply and fixing flame proof Junction box suitable for 20mm dia ERW conduit of 3 way complete all as specified and directed.
Supply and fixing flame proof Junction box suitable for 20mm dia ERW conduit of 4 way complete all as specified and directed.
Supply and fixing flame proof Junction box suitable for 25mm dia ERW conduit of 2 way complete all as specified and directed.
Supply and fixing flame proof Junction box suitable for 25mm dia ERW conduit of 3 way complete all as specified and directed.
Supply and fixing flame proof union 20mm dia complete all as specified and directed.
Supply and fixing flame proof union 25mm dia complete all as specified and directed.
Supply and fixing flame proof union flexible conduit 20 mm dia complete all as specified and directed.
Material and labour for sub main wiring with 2 single core FRLS PVC insulated standard copper conductor 6 Sqmm and one 6 Sqmm for earth continuous earth wire including suitable ERW conduit flame proof ISI marked all as specified & directed. Note :-Two run of 6 sqmm & one run of 6 sqmm earthwire alongwith ERW conduit and accessories will be measured as one unit.
Material and labour for sub main wiring with 2 single core FRLS PVC insulated standard copper conductor 2.5 Sqmm and one 2.5 Sqmm for earth continuous earth wire including suitable ERW conduit flame proof ISI marked all as specified & directed. Note :Two run of 2.5 sqmm & one run of 2.5 sqmm earthwire alongwith ERW conduit and accessories will be measured as one unit.
Supply and fixing flame proof MCB DB 8 way made out of LM-6 material complete all as specified including the following:- Incomer MCB SPN 6 to 32 Amps, 'C' curve, 50 Hz, 10 KA - 01 Nos Outgoing (a) MCB SP 6 to 16 Amps, 'C' curve, 50 Hz, 10 KA - 02 Nos. (b) MCB SP 6 to 10 Amps, 'C' curve, 50 Hz, 10 KA - 02 Nos.
Supply and fixing flame proof MCB DB 4 way made out of LM-6 material complete all as specified including the following:- Incomer MCB SPN 6 to 16 Amps, 'C' curve, 50 Hz, 10 KA - 01 Nos Outgoing MCB SP 6 to 10 Amps, 'C' curve, 50 Hz, 10 KA - 02 Nos.
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt, earth lead GI wire 4mm dia (8 SWG) connected to GI earth plate electrode by means of bolts, nuts, check nuts and washers of galvanized iron and thimbles and other end of earth wire connected to main switch board and protected by galvanized iron light grade 15mm bore and GI pipe 20mm bore medium grade with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete (1:3:6) type C-2 & RCC cover in M-20 (Design mix) and all as shown in Electrical Plate No 3 of MES standard Schedule of Rates (Part-I) of 2009 complete all as specified and directed. Notes : (i) Outer edge of earth pit will be 1 m away from the outer edge of PCC chamber. (ii) GI earth wire upto main board is included in this item. (iii) Water pipe shall be provided in slanting position.
RAIN WATER HARVESTING WORKS
Material and labour for 200 mm dia boring holes in normal available strata of 30 m depth complete all as specified and directed.
Supply and fixing for PVC pipe 160 mm dia class 'A' of pressure rating 6Kg/cm² including all necessary fitting complete all as specified and directed.
Supply and fixing for perforated/slotted PVC pipe 160 mm dia class 'A' including all necessary fittings complete all as specified and directed.
Material and labour for pea gravel packing including jute as filter media 4mm to 6mm size around PVC pipe complete all as specified and directed.
Material and labour for filling pea gravel in RWH of size 6mm to 10mm complete all as specified and directed.
Material and labour for filling pea gravel in RWH of size 2mm to 4mm complete all as specified and directed.
EXTERNAL ELECTRIC SUPPLY WORKS
Supply and fixing MCCB 4 pole 415V, adjustable type 63 Amp with breaking capacity 16KA complete all as specified and directed.
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt, earth lead GI wire 4mm dia (8 SWG) connected to GI earth plate electrode by means of bolts, nuts, check nuts and washers of galvanized iron and thimbles and other end of earth wire connected to main switch board and protected by galvanized iron light grade 15mm bore and GI pipe 20mm bore medium grade with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete (1:3:6) type C-2 & RCC cover in M-20 (Design mix) and all as shown in Electrical Plate No 3 of MES standard Schedule of Rates (Part-I) of 2009 complete all as specified and directed. Notes : (i) Outer edge of earth pit will be 1.5m away from the outer edge of PCC chamber. (ii) GI earth wire upto main board is included in this item. (iii) Water pipe shall be provided in slanting position.
EXTERNAL WATER SUPPLY WORKS
Material and labour for cutting and jointing the existing pipe line for making branch connection of GI pipe of suitable and making thread for suitable insertion of tee of size 150mm x 150mm x 100mm connection complete all as specified and directed.
Material and labour for cutting and jointing the existing pipe line for making branch connection of GI pipe of suitable and making thread for suitable insertion of tee of size 50mm x 50mm x 25mm connection complete all as specified and directed.
Supply and fixing ductile iron fittings such as bends (any type radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc.), Tee pieces single branch 'Y' junction, double branch, cross (all sockets and spigot) collars, tail pieces with one end flanged (integrally cast) & other end socketed, spigot caps and plugs suitable for 100 to 150mm bore ductile iron pressure pipes, of K-7 classification and push on flexible rubber gasket joints complete all as specified and directed. Notes :- (a) The weight of the fittings shall be measured and paid as given in relevant IS or actually provided which ever is less. (b) All fittings shall bear relevant IS stamping marking. (c) Excavation and earth work shall be measured and paid for separately (d) Cost of the joints and jointing materials shall be deemed to be included in the relevant items of DI pipes above (e) Fitting shall be of same makes as DI pipes or as per make recommended by manufacturer of pipe.
Material and labour for construction of brick masonry valve pit of size 900 x 900 x 900mm (internal dimension) with mild steel sheet cover 6mm thick and frame of angle iron of size 40mm x 40mm x 6mm duly painted with two coats of synthetic enamel paint over one coat of red oxide primer including excavation and earth work,150mm thick PCC (1:4:8) type D-2 as in foundation, brick work in cement mortar (1:6), locking arrangement, and all inner size of pit shall be plastered 15mm thick in cement mortar (1:4) and coping in PCC (1:2:4) type B-1 over brick wall complete all as shown in Drg No CEJZ/TD-1060/08 Sh 1/3 to 3/3 and directed.
LIGHTENING PROTECTION WORKS
Material & labour earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt, earth electrode GI strip 32 x 6mm connected to GI earth plate electrode by means of bolts, nuts, check nuts and washers of galvanized iron and thimbles and other end of earth strip connected to test point and protected by galvanized iron light grade 50mm bore and GI pipe 20mm bore light grade with funnel and wire mesh for watering including necessary excavation and earth works. PCC chamber in cement concrete (1:3:6) type C-2 using graded stone aggregate and RCC cover in M-25 (Design mix) and all as shown in Electrical Plate No. 3 of MES Schedule (Part-I) of 2009 complete all as specified and directed. Notes : (i) Outer edge of earth pit will be 1 m away from the outer edge of PCC chamber. (ii) Water pipe shall be provided in slanting position.
HOT CRANE WORKS
Designing, supplying, installation, testing & commissioning of 3 Ton capacity HOT crane manually operated type having hoisting height of 4.00m single girder complete with and including main frame bridge girder/ box girder and carriage trolley with frame crab buffers, gear boxes, shafts, rope sheaves, wire rope, wheels, lifting hook, brakes, motors etc conforming to IS : 807, IS : 3177, IS : 3832 and to meet the following requirement and complete all as specified and directed :- 1. Crane bridge material - ISMB : 450mm x 140mm (Make: SAIL) 2. Span : 7.55m 3. LT wheel load (Static) : 1650 Kgs 4. LT wheel dia : 250mm 5. LT rail (2 side) : 40mm 6. No of Fall 04 to 06 7. Loading chain : Alloy steel grade 80 size 12mm 8. Hand chain : MS grade 30 size 6mm 9. Hardness : 250-300 BHN 10. Long travel (No/dia) : 4 x 250mm 11. LT wheel pinion : 120mm x 2 Pcs 12. Buffer type : Rubber Buffer provided 13. Bearing blocks : Provided 14. End carriages : Construction and fabricated from ISMC rolled section 15. LT wheels : 4 Nos straight treated type EN 8 forged steel double ball bearing 16. Pinion/Axle : EN9 heat treated carbon alloy steels 17. Gears : As per IS 4460 made from EN 8 supported on ball bearing 18. Bearings: Heavy duty sealed bearings 19. Gear box of chain pulley block : Totally enclosed with splash lubrication alloy steel in helical design 20. Gantry track materials : ISMB 250 x 125mm with supporting plate 10mm 21. Pillar with bottom & top material : 150mm x 65mm with supporting plate 12mm 22. Painting : Two coat zinc chromate followed by 2 coats of golden yellow synthetic enamel paint (Make: Nerolac/ Asian)
ROLLER SYSTEM WORKS
1. Roller system for provision of conveyor roller alongwith angle plus channel fixed with sectioned roller all along the length of the HPM 14.5m with the platform of 1100mm width scattered into seven sections of 2 m each and 1 section of 0.5m long. Each section has channel with serrated rubber rollers of 5 in 2m length & closing of the door making it easy handling of the trolley carrying the ammunition complete all as specified and directed. 2. 3" x 3" angle, 2" x 4" channel for rubber rollers use natural rubbers bearing will be SKF/ARB/FAG with 2 RS make after bearing oil seal will be used.
Sant Construction Co.
M/s Jatindra Construction Company
M/s Madan Lal Bansal and Co. Contractors Pvt. Ltd.
Beant Construction Co Pvt Ltd
NAFREF ENGINEERS PVT LTD
Rahul Construction India Pvt Ltd
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 0.31 MB
DrgSrlNo1and4to19.pdf
Additional Documents • 3.94 MB
DrgSrlNo27to50.pdf
Additional Documents • 16.36 MB
DrgSrlNo22to24.pdf
Additional Documents • 18.71 MB
DrgSrlNo51to75.pdf
Additional Documents • 17.34 MB
DrgSrlNo25and26.pdf
Additional Documents • 19.75 MB
DrgSrlNo136to155.pdf
Additional Documents • 12.19 MB
DrgSrlNo101to110.pdf
Additional Documents • 17.98 MB
DrgSrlNo76to100.pdf
Additional Documents • 16.72 MB
DrgSrlNo111to135.pdf
Additional Documents • 15.22 MB
DrgSrlNo156to170.pdf
Additional Documents • 7.06 MB
DrgSrlNo20and21.pdf
Additional Documents • 17.40 MB
Tender_ESH_Baddowal_LDH.pdf
Tender Documents • 2.59 MB
BOQ_372252.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid