CA NO GE/C-22/2020-21 PETTY REPAIRS FOR DAILY WK IN THE AREA OF RRRC ZONE A AND CERTAIN EXTERNAL AND INTERNAL REPAIR OF JOINERY WORK PLASTER REPAIR TO ROOF SHEETS SQUAD POSTS AND SHEDS AT RAJ RIFCENTRE IN THE AREA OF B/RI OF GE (C) DELHI C

Amount

Petty repairs low level flushing cistern any size/description for repair of leaking water by adjusting/replacing the washer and adjustment of lever required for making the cistern functional complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (Un reinforced) in ground floors n.exc 15cm thick (above or below grnd level) complete all as specified and directed by Engineer-in-Charge.

S/F in repairs brass spindle 01 No and 03 No suitable for 15mm bib cock/stop cock/angle cock/CP piller cock complete all as specified and directed by Engineer-in-Charge.

S/F in repairs 05 No and 04 No brass spindle / brass face suitable for 15 mm wall mixer/WHB Mixer /Sink Mixer/CP piller cock complete all as specified and directed by Engineer-in-Charge.

Removal of air lock/blockage of water in GI tubing 15/20mm bore incl taking down (if reqd), cleaning the pipe or fitting etc and refixing the same in position complete all as specified and directed by Engineer-in-Charge.

S&F in repairs of 15mm bore size PVC PTMT bib tap complete all as specified and directed by Engineer-in-Charge. (Make: Prayag/ Polytuf/Symat).

S&F in repairs brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed by Engineer-in-Charge..(Make : Jaquar /Marc)

S&F in repairs 15mm dia brass chromium plated pillar tap with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank complete all as specified and directed by Engineer-in-Charge.

Cleaning blockage in rain water pipe by removing the CI grating and rounding etc and refixing old CI grating in position in cement mortar 1 : 6 complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC connection 600mm long with 2 Nos brass check nuts suitable for 15mm bore of pipe with washer complete all as specified and directed by Engineer-in-Charge. Make : Polyplast/prayag).

S&F in repairs chromium plated brass stop cock fancy type (concealed type)screwed both ends high pressure for 15mm bore size iron pipe or ferrule complete all as specified and directed by Engineer-in-Charge.Jaquar/Marc /Kholar)

S&F in repairs chromium plated brass angle valve suitable for 15mm bore pipe, complete all as directed and as specified (Make : Jaquar /Marc/Kholar)

S&F in repairs CP brass shower rose 125mm size suitable for 15mm bore pipe with arms complete all as specified and directed by Engineer-in-Charge. (Make : Jaquar/Marc/Kholar)

S&F in repairs PTMT waste coupling 32 mm dia for WHB complete all as specified and directed by Engineer-in-Charge. (make: ZIM/GMG/PARKO)

S&F in repairs PTMT waste coupling 38/40mm dia for sinkcomplete all as specified and directed by Engineer-in-Charge. (make: ZIM/GMG/PARKO)

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed by Engineer-in-Charge. Make-Cera,Hindware Johanson

S&F in repairs PVC flush pipe of 32mm dia pipe for connecting low level flushing cisternicl jointig to WC complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 32mm bore and 75cm long PVC waste pipe for WHB complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1: 2 : 4 type B-1 ( using 20mm graded crushed stone agg.) 50mm thick as in floor finishing surfaces of conc topping even and smooth with using extra cement complete all as specified and directed by Engineer-in-Charge.

Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 75 mm thick , as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints duly dilled with bitumeste filling throughout the thickness of plinth protection complete all as specified and directed by Engineer-in-Charge.

M&L for machine pressed precast cement concrete inter locking paver block any shape and size ,60 mm thick M-35 grade , confirming to IS 15658-2006, over 75mm tkick PCC type D-2 1:4:8 (40 mm graded aggregate) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and directed by Engineer-in-Charge. (Make : Commander/ Champion Cera).

S&F in repairs viterous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing complete all as specified and directed by Engineer-in-Charge.

S&F vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair size 580x440mm white with intergral footrest with 'P' or 'S' trap complete all as specified and directed by Engineer-in-Charge. (excluding flushing cistern and flush). Make-Cera,Hindware, Johanson

S&F in repairs vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified and directed by Engineer-in-Charge. Make-Cera,Hindware,Johanson

Chequerred cement concrete tiles 25 cm x 25 cm x 22mm thick with grey cement and pigmet machine pressed, set, jointed and pointed in neat cement slurry in floors laid over and including 15 mm thick screed bed in CM 1:6 over 75 mm thick PCC 1:4:8 complete all as specified and directed by Engineer-in-Charge.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc of 250 to 500 ltr capacity tanks incl washing the tanks and draining out dirty water complete all as specified and directed by Engineer-in-Charge.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc of 500 to 1000 ltr capacity tanks incl washing the tanks and drainig out dirty water complete all as specified and directed by Engineer-in-Charge.

S&F in repairs chromium plated Jet for WC with 1.00 Mtr long PVC pipe including nec essary GI fitting as required like toe, nipple etc complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/Marc/Kholar)

S&F in repairs HDPE PVC lid (cover) for 500 ltr to 2000 Ltrs capacity PVC tank complete all as specified and directed by Engineer-in-Charge. (Make : Sintex or Sheetal/polywell ).

M&L in repairs PVC fibre mirror cabinet of size (450x325x120mm ) and firxed to wall after taking down old mirror complete all as specified and directed by Engineer-in-Charge. Make-commander,prayag,Atul.

S&F 15mm dia CP brass wall mixer 3-in-1 for bath room as in repair complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/Marc/Kholar)

S&F 15mm dia CP brass mixer for sink as in repair complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/Marc/Kholar)

S&F 15mm dia wash hand basin CP brass central hole mixer as in repair complete all as specified and directed by Engineer-in-Charge.. Make :Jaquar/Marc/Kholar)

S&F in repair health faucet brass cromium plated with 1500mm long CP pipe complete all as specified and directed by Engineer-in-Charge. Make : Jaquar /Marc /Kholar)

S&F in repair sheet glass (5MM thick) corner shelf 250mm radius incl CP railing complete all as specified and directed by Engineer-in-Charge.. (Make : Jaquar /Marc/Kholar)

S&F in repair sheet glass (5MM thick) assembly shelf 450x100mm incl CP railing complete all as specified and directed by Engineer-in-Charge. (Make : Jaquar/ Marc/ Kholar)

S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor/nahani trap (with hole and without hole) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP towel rail 600mm long 20mm dia aluminium anodised chromium plated fixed with wooden guities embeded in cement mortar (1 : 3) with steel screws etc, complete all as specified and directed by Engineer-in-Charge. make: .Make : Jaquar/Marc/Kholar)

M&L soap dish chromium plated brass fixed with brass nuts and screws as in repair complete all as specified and directed by Engineer-in-Charge. Make : Jaquar /Marc/Kholar)

M&L toilet paper holder brass chromium plated as in repair complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/Marc/Kholar)

S&F in repairs stainless steel plate rack of size 90x80x25 cm depth size made out of 0.80mm thick sheet complete all as specified and directed by Engineer-in-Charge. (Make : Jayana/Neel kanthNirali/)

S&F in repair sinks with drainage board made of stainless steel 1mm thick Kitchen or laboratory with plugs, washers and wastes: including bedding in cemenet mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge. Make -Jayana / Neel kanth/ Nirali

S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall by providing suitable sie of stack clamp (110 mm bore) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 110 mm PVC (SWR) bendscomplete all as specified and directed by Engineer-in-Charge.

S&F in repair 100mm dia bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints and fixed to wall complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass of any thickness/size or quality from aluminium door / window frame fixed with rubber packing and aluminium beading tinted glass S&F 5.5mm thick exceeding 0.50Sqm each pane complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass of any thickness/size or quality from wooden/metal frame fixed with putty/beading & S&F 3mm thick sheet glass, plain ordinary quality not exc 0.5sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F in repairs galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tied tacks or galvanised wire stapple etc to wooden/steel doors/windows complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Allumimium sheet 0.5 mm thick, fixed with alluminium alloy screws complete all as specified and directed by Engineer-in-Charge.

S&F in repair two legged aluminium floor door stopper with rubber shoe 140mm long complete all as specified and directed by Engineer-in-Charge.

S&F in repairs mild steel peg stays galvanised / stove enamelled black finish for steel windows as directed etc as per sample complete all as specified and directed by Engineer-in-Charge.

S&F in repair 25 mm bore aluminium powder coated drapray rod incl wooden brackets and end knob / cap in matching rings (@120mm C/C) complete all as specified and directed by Engineer-in-Charge.

Dismantling boarding , any description, fixed in any position with screws complete all as specified and directed by Engineer-in-Charge.

S&F 6mm thick plywood with 5Nos of ply, grade BWR, type BB, fixed with screws to timber frame work etc, complete all as specified and directed by Engineer-in-Charge. Make : Kit Ply/ Novapan Industries /Archidply/ Bhutan Board.

S & F 19mm thick block boards, grade 2 quality, commercial type, fixed with screws to timber frame work including two coat of synthetic enamell paint over a coat of pink primer and teak wood leaping all around the edges as in Kitchen cupboards and shutters of Almirahs / Kitchen cupboards complete all as specified and directed by Engineer-in-Charge. Make : Kit Ply/ Novapan Industries /Archidply/Bhutan Board.

M&L for 12mm thick prelaminated particle board one side decorated choice laminated and other side balancing white lamination replace in aluminium partion or aluminium doors framecomplete all as specified and directed by Engineer-in-Charge. Make : Kit Ply/ Novapan /Archilply

S & F brass chromium plated towel Ring including CP brass bracket complete all as specified and directed by Engineer-in-Charge. Make: Atlantic series /Coral sries of Sara & Nixo

S & F brass chromium plated towel rack 600 mm size including a pair of CP brass bracket complete all as specified and directed by Engineer-in-Charge. Make: Atlantic series /Coral sries of Sara & Nixo

S&F in repair precast RCC fibre reinforced GT cover of size 400mmx400mmx30 - 40mm thick complete all as specfied.

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed by Engineer-in-Charge.

M&L non skid colour ceramic tiles7 to 8mm thick area of each tile exc 0.11Sqm but nexc 0.18 Sqm jointed in grey cement and pointed in white or colour cement to match the existing surface including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. Make : Kajaria/Somany/Johnson.

M & L for Joint free coloured ceramic tiles 600x600x 8-10mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm in floors, including 15mm thick screed bed in cement mortar 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by the Engineer-in-Charge. Make : Kajaria/Somany/Johnson.

M&L PCC 1:2:4 type B1 using 20mm graded stone agg as in roof kerbs or mud stops, rounded or chamfered on edges incl necessary form work required complete all as specified and directed by Engineer-in-Charge.

Repair of WC joint filling with white cement to stop leakage and finished properly complete all as specified and directed by Engineer-in-Charge.

M&L for patch repairs to floor, plinth etc and the like in PCC 1:2:4 incl preparing roungening/demolition and cleaning the surface, making good, finishing even and smooth without using extra cement in patches area n exc 1.50 Sqm each patch complete all as specified and directed by Engineer-in-Charge.

M & L for cleaning of roof area not exceeding 160 Sqm each and chajjas of bldgs front, rear and side complete, clearing mouth of rain water pipes and spouts in chajjsas etc complete including removals of roots of vegetation growth, algae, small plants etc and making good the existing surface with cement mortar plaster in CM 1:3 mixed with WPC @ 3% of weight of cement Minium area of cement plaster per block - 10 Sqm,complete all as specified and directed by Engineer-in-Charge.

S&F in repair two way angle valve 15mm dia fancy type chromium plated all complete all as specified and directed by Engineer-in-Charge. Make : Jaquar /Marc)

S&F rubber beading suitable for preventing the insects and fixed to door opening(shutters) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 2.00mm thick Fibre glass reinforced translucent plain sheets fixed with coach screw and washer in roof, wall etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs ball valve of PTMT with Polyethene float for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stop cock cast copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends, suitable for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-Charge. Make : ZIM/PARKO/SEIKO

All as per item no 73 above but for 20mm internal bore complete all as specified and directed by Engineer-in-Charge. Make : ZIM/PARKO/SEIKO

S&F in repairs spindle brass long leg 4 & 5 No for concealed stop cock of 15mm bore size, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs waste fitting (coupling) brass chromium plated 32mm dia for complete all as specified and directed by Engineer-in-Charge. WHB. Make: ZIM/GMG/PARKO.

S&F in repairs PVC syphon with rod for low level flushing cistern incl PVC handle with adjustable lever( flushing cistern kit ) complete all as specified and directed by Engineer-in-Charge.

Supply only flush handle PVC with adjustable lever and hook for low level flushing cistern complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 38/ 40 mm bore and 75cm long PVC waste pipe for sink complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP curtain brackets suitable for 20 mm bore curtain rod complete all as specified and directed by Engineer-in-Charge.

S&F in repairs mortice lock brass body 4 lever including two Nos brass handle suitable for wooden shutters complete all as specified and directed by Engineer-in-Charge. Make : Harrison/Godrej

Easening/securing/retightening of shutter of any size and description incl taking down and then refixing in position including making good with plaster complete all as specified and directed by Engineer-in-Charge.

S&F in repairs mortice night latch, 100mm, 4 lever with mild steel body complete all as specified and directed by Engineer-in-Charge. Make: Godrej/harisson

S&F as in repair wooden bracket suitable for 25 mm bore curtain rod complete all as specified and directed by Engineer-in-Charge.

M&L for 19mm thick prelaminated particle board with both side decorative face, including providing 6mm thick second class hard wood beading to edges of board for cup boards complete all as specified and directed by Engineer-in-Charge. Make of prelaminated board : Kit Ply/Novapan Industries /Archidply/Bhutan Board.

M&L for patch repairs to any type of tiling incl replacement of broken tiles by providing 15 mm thick screed bed in CM 1:6 on wall and floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match in patches area exc 0.10 and n exc 0.5 Sqm each patch to match with the existing surface complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc ., complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work built in cement or cement lime mortar of any description including quoins,arches,pillars,etc., complete all as specified and directed by Engineer-in-Charge.

M & L for brick work built in Cement Mortar 1:4, using sub class 'B' bricks,old size , straight or curved on plan exceeding 6 m mean radius complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces finished een and smooth without using extra cement with using water proofing compound complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick in CM 1:6 other than fair faces of brick work or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface finished even and smooth without using extra cement incl scafolding etc, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engineer-in-Charge. Make : Snocem/Duracem/Berger

M&L for preparation of newly plastered surfaces and applying two coats of Oil bound distemper on newly plastered surface over a coat of primer complete all as specified and directed by Engineer-in-Charge. Make : Acro paints/Shalimar paints/Asian paints.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall and ceiling board fibre pulp AC boards etc any thickness including cover fillets removing the wiring and refixing the same including fixture as necessary at site including frame work complete all as specified and directed by Engineer-in-Charge.

M & L in repair for providing snap grid ceiling with E - board ceiling tiles of size 600x600mm including providing 4mm thick aluminium angle of size 25x25x1.5mm to wall alround and tee section of size 38x38x1.5 mm to middle panels both ways and fixed with 4mm dia GI wire, including applying two coats of oil bound distemper to ceiling boards (exposed surface) complete all as specified and directed by Engineer-in-Charge. Make of board : Anchor/Nepal Boards/Duratuff/Gypboard

M&L in repair for 5- 8mm thick teak wood lipping all around for 19/20 mm shutter including polishing/ painting and fixing with fevicol, headless screws complete all as specified and directed by Engineer-in-Charge.

S&F continuous (Piano) hinges, mild steel bright finish or electro glavanised (width of flap when open 30mm) complete all as specified and directed by Engineer-in-Charge.

S&F 40mm dia cupboard knobs fixed with nut screw and washer of mild steel, bright finished complete all as specified and directed by Engineer-in-Charge.

S&F 100mm size hasp and stable safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge. Make : Argent Industries/Mowjee/Crown (ISI marked).

Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame)complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any discription not exceeding 1 sqm each complete complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any discription exceeding 1 sqm each and not exceeding 2 sqm each complete all as specified and directed by Engineer-in-Charge.

S&F 30 mm thick 2nd class hard wood glazed and skelton shutter divided into square with plain, chamferred or rounded sash bar and fitted with cut and mitred beads for securing glass, size of members as per SSR Part - I section 8 clause 8.24 (b).complete all as specified and directed by Engineer-in-Charge.

S&F 30MM thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge. Make : M/s Jain wood Industries/Merino flush door, Faridabad/Goyal Industries, Faridabad.

Supply and fix 35 mm thick second class hard wood plain framed factory made panelled shutter (two panel) with lock rail and panel 9mm B.W.P commercial ply the size of rail and style as per IS 1003/SSR part -1 complete all as specified and directed by Engineer-in-Charge.

S & F factory made Glazed and skeleton shutters 35mm thick 2nd class hard wood open rebated and prepared to receive glass, gauge etc edges of framing plain chamfered or rounded fitted with cut & mitred beads for securing glass etc size of member shutter as specified in SSR Part I Section 8, Clause 8.24 (a) supplied and fitted to chowkhats.complete all as specified and directed by Engineer-in-Charge.

S&F Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom of the frame.complete all as specified and directed by Engineer-in-Charge.

S & F 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.complete all as specified and directed by Engineer-in-Charge.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed by Engineer-in-Charge.

S&F MS butt hinges medium weight 100 mm size fixed with MS screws complete all as specified and directed by Engineer-in-Charge. Make : Mowjee/Kitch Archtectural Product (P) Ltd/ RS Industries.

S&F aluminium anodised barrel tower bolt extruded section 200 mm long and fixed with MS screws complete all as specified and directed by Engineer-in-Charge.

S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with MS screws complete all as specified and directed by Engineer-in-Charge.

S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut complete all as specified and directed by Engineer-in-Charge.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.

S&F in repair 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar complete all as specified and directed by Engineer-in-Charge.

S & F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-Charge. Make : Argent Industries/Mowjee/Crown (ISI marked).

S&F 2nd class hard wood plain solid straight chowkhat or frame, wrought, framed, rebated on the solid, put together with glue and pinned at joint complete all as specified and directed by Engineer-in-Charge.

S&F MS hold fast of flat iron 25 x 3 mm made to shape and fixed with MS screws complete all as specified and directed by Engineer-in-Charge.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description & width and girth, not otherwise described, and treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each, ditto

Dismantling wrought iron or mild steel work of any description such as guard bars, grills etc complete all as specified and directed by Engineer-in-Charge.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

Taking down steel window n. exceeding 2.00Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge.

S & F Steel window (Factory made) single rebate, with side hung shutter incl hinges, steel handle and peg stay complete with glaze/gauge bars dovetailed or welded complete all as specified and directed by Engineer-in-Charge.

Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay, complete half fixed glazed and half top hung glazed complete all as specified and directed by Engineer-in-Charge. (Glass shall be measured and paid separately).

Taking down aluminium door frame including shutter of any description not exc 1.5 Sqm each and removing from site complete all as specified and directed by Engineer-in-Charge.

All as per item No.130 above but area exc 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ Sqm including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium window and ventilator shutters, fixed typewithout sash bar, aluminium section weighing 0.55 kg/Sqm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/Sqm including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and directed by Engineer-in-Charge.

Material and labour for aluminium alloy Powder coated standard 10mm section window grill as per approved sample and as per IS specifications complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized iron staples including wooden beadings, complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, any size, quality or description) from metal frames and Supply and fix figured sheet glass 3 mm thick, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary, complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Fixing only kitchen plate rack including all material and labour for fixing the plate rack such as brackets, wooden or plastic gutties or any other neceesary fixtures or fittings etc complete all as specified and directed by Engineer-in-Charge. (No extra payment will be made for any fixture or fitting)

Fixing only Sinks with / with out drainage board kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm or above 05 sqm with wooden or plastic gutties or any other neceesary fixtures or fittings etc all as spd and directed by the Eng-in-charge.(No extra payment will be made for any fixture or fitting)

Material and labour for welding in repairs not exc 2.5 cm in length complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing bore of tubing 15mm complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing bore of tubing 20mm complete all as specified and directed by Engineer-in-Charge.

Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

All as per item No 146 above but 20mm dia complete all as specified and directed by Engineer-in-Charge.

Cuttting chases for concealed water tubing or concealed conduct wiring etc and making good with cement mortar 1:3 cutting exc 10 cm not exc 20 cm grith in brick wall complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing only PVC low level white flushing cistern valveless syphonic action type 10 lts capacity including all material and labour for fixing the plate rack such as brackets, wooden or plastic gutties or any other neceesary fixtures or fittings etc complete all as specified and directed by Engineer-in-Charge. (No extra payment will be made for any fixture or fitting)

Supply only PVC waste pipe 32 mm dia for wash hand basin, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs shower rose, chromium plated brass, fancy type, 100x100 mm, with or without swivel , any size, including fixing to steel pipe or union, complete all as specified and directed by Engineer-in-Charge.

Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L type or J type or cranked hook bolts complete all as specified and directed by Engineer-in-Charge.. Make : Everest/Charminar/ Swastk/Ramco.

S & F 6mm thick asbestos cement corrugated or semi corrugated sheets in roof fixed with L type or J type or cranked hook bolts complete all as specified and directed by Engineer-in-Charge.. Make : Everest/ Charminar/ Swastk/Ramco.

Dismantling plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering complete all as specified and directed by Engineer-in-Charge.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.. Make Kirby/Prestar/ Multicolor/ JSW

Dismantling water tanks exc 250ltrs and n.exc 500 ltr capacity and remove to store complete all as specified and directed by Engineer-in-Charge.

Material and labour for rotational moulded polyethylene water storage tanks 500 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 25 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description complete all as specified and directed by Engineer-in-Charge. Make : Sintex/Polywell/Polycan

Dismantling water tanks exc 500 ltrs and n.exc 1000 ltr capacity and remove to store complete all as specified and directed by Engineer-in-Charge.

Material and labour for rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 25 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description complete all as specified and directed by Engineer-in-Charge. Make : Sintex/Polywell/Polycan

M&L for replacement of wooden glazing beading of 2nd class hard wood straight (any size) finished wrought fo glazing or gauged joinery for fixing wire gauge/securing glass pane complete all as specified and directed by Engineer-in-Charge.

S&F in repair two way angle valve 15mm dia fancy type chromium plated complete all as specified and directed by Engineer-in-Charge. Make : Jaquar /Marc

S&F rubber beading suitable for preventing the insects and fixed to door opening(shutters) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 2.00mm thick Fibre glass reinforced translucent plain sheets fixed with coach screw and washer in roof, wall etc complete all as specified and directed by Engineer-in-Charge.

S & F in repair 75 mm cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed by Engineer-in-Charge. Make : BIC /KESORAM/SKF/SRIF

S & F cast iron bends (any radius) for 100 mm bore pipe, diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge.

S & F cast iron bends (any radius) for 75 mm bore pipe, diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge.

S & F cast iron branch pieces, single (equal or unequal) for 100 mm bore pipe, ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge.

S & F cast iron branch pieces, single (equal or unequal) for 75 mm bore pipe, ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge.

S & F stack clamps for CI pipe 100 mm bore made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engineer-in-Charge.

S & F stack clamps for CI pipe 75 mm bore made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engineer-in-Charge.

S & F in repairs PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. Make : Supreme/Prince/ Kissan

S & F in repairs PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. Make : Supreme/Prince/ Kissan

S & F in repairs PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints,fixed to walls by providing stack clamp of suitable size complete all as specified and directed by Engineer-in-Charge. Make : Supreme/Prince/ Kissan

S & F as in replacement pressed steel frames (125x60) mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one shop coat of primer complete all as specified and directed by Engineer-in-Charge. Note:- taking down door shutter and refixing of same & cost of PCC1:3:6 in filling back of xhowkhat shutter deemed to be included in unit rate quoted

S & F as in repairs pressed steel frames (105x60) mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one shop coat of primer complete all as specified and directed by Engineer-in-Charge. Note:- taking down door shutter and refixing of same & cost of PCC1:3:6 in filling back of xhowkhat shutter deemed to be included in unit rate quoted

M & F framed work as in doors,as in sun shade or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410W-Gde-250 quality A complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Allumimium sheet 0.5 mm thick, fixed with alluminium alloy screws complete all as specified and directed by Engineer-in-Charge.

Note :- Total amount of Sch of credit is Rs 136930.00.00 as per Sch of credit. Net contract sum shall be total quoted amount of bidder (-) amount of Sch of credit.

SHREE RAM BUILD TECH

M/S Sunil Steel Works

AMIT BROTHERS