Work related to PVC flooring and wall paper in Cluster office and Some renovation/maintenance works in the Neutrino area and student cubicles at 1st floor of Hostel-1 building at HRI Prayagraj

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both manufacturer’s specification and also including the cost of making specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum moisture resistant board

Wall/Ceiling painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard sections and other sections of approved IS: 1285, fixing with dash fasteners of necessary filling up the gaps at junctions, with required EPDM rubber/ neoprene shall be smooth, rust free, straight, mitred wherever required including cleat angle, glazing / paneling, C.P. brass / stainless architectural drawings and the directions of paneling and dash fasteners to be paid for powder coated aluminium (minimum thickness of powder coating 50 micron) kg

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item ) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing of new EPDM rubber / neoprene gasket by replacing old EPDM rubber / neoprene gasket from existing glazing in aluminum door, window, ventilator shutter and partition works etc. and completing it as per existing

Removing of old PVC/Carpet flooring and cleaning the floor to make it for refixing of new PVC flooring as required at the place.

Providing and fixing 2mm thick Standard polyvinyl chloride resin binder flooring. Colour of flooring shall be approved by the Engineer in-charge. Make ARMSTRONG or Equivalents (weight should not be less than 4.5 kg/sqm)

Providing and fixing good quality paper based wall paper on brick wall including removing the old paper with all required materials, tools and glue Make, colour and shade of wall paper will be decided by the Engineer-in-charge