30030/JOB/GE (EP) SOG/2024-25/02/E3

Amount

SPECIFICATION FOR WORK. The following items are proposed for repair, maintenance and preservation at GE (Engr Park) Suratgarh :- (a) Anchor Winch 29 Nos (b) Cross Girder 04 (c) Carrying Handle 25 Nos (d) JM Lever 04 Nos (e) Ramp Girder 57 Nos (f) Ramp Connector 20 Nos (g) Steel Crib 20 Ton 06 Nos (h) F/H Picket 2’ Long 388 Nos (j) F/H Picket 3’ long 17 Nos (k) MRS Coil 12 Nos (l) MGS ATW CL 12 (Roll) 114 Nos (m) Tie Bar 291 Nos (n) Common Spike 2347 Nos (o) Op Pin 22 Nos (p) MGS ATW CL 30 (Roll) 04 Nos (q) Almn Alloy Spl Shaped Sec Planks 200x3350mm 441 Nos (r) HDPE Water Tank 1500 ltr 12 Nos (s) Membrane Panel 17.8 x 5.4M 04 Nos (t) Foot Pump 02 Nos. SPECIFICATIONS. 1. Removing the above mentioned stores from the existing stack to the required site of work approx distance 75 to 100 mtr for Repair, maint/cleaning and preservation. 2. Removing existing paint and cleaning the same with steel wire brush & cotton waste and emery paper to make it free from rust and dust. 3. Iron welding of Carrying Handle, JM Lever, Ramp Connector, Steel Crib, F/H Picket 2’ long and 3’ long, MRS Coil, Tie Bar, Common Spike, Op Pin at the places of cracked/broken/band portion of the body with suitable iron plates, welding rods and finishing, including preparation for welding and straight of bend portion all as directed by SK/BSO/GE. 4. Aluminum welding at the places of cracked/broken portion of the body with suitable aluminum plates, welding rods and finishing, including preparation for welding and all as directed by SK/BSO/GE. 5. Straightening the iron items as required by heating and hammering, sharpening the end of F/H Picket 2’ & 3’, Common Spike & Op Pin and fixing of Flat Head of Picket 2’ & 3’ and Head of Common Spike and Op Pin all as directed by SK/BSO/GE. 6. Straightening the aluminum items as required by heating and hammering of ATW CL-30 Roll and planks and all as directed by SK/BSO/GE. 7. Testing and changing SWR and winding SWR rope after greasing including testing for smooth functioning and fittings of broken/missing spare parts of all Anchor Winch Assy and almn paining, Supply & replacement of pin locking-30 Nos, Adapter 8mm dia x 45mm long-30 Nos and mixing thoroughly the araldite and hardener in the ratio of 2:1 of Hardener 0.355 Kg. Araldite 0.700 Kg/Girder and preading the Carborandum 3.84 Kg/Girder, Test locking device of the Ramp Connector for functioning and greasing it, Opening of ATW CL-12 Roll, Checking Planks, Cleaning with wire brush, cotton waste and repair of MRS Coil & Clamp & link assy as required the painting of MRS coil, clamp & link assy and re-rolling the same. 8. Maintenance of leakage foot pump with patching with patch cloth and applying/dusiting of dry powder French chalk qty 0.050 Kgs per Foot Pump on complete external surface of the foot pump and patching of Membrane Panel 17.8x5.4M where required and apply French chalk powder during folding and HDPE water tank 1500 ltr required Lid 9. Painting of all stores mentioned above as per direction of SK/BSO/GE. Paint OG Ser No (g) 850ml/item, Ser No (k) 120ml/item Ser No (I) 200ml/item. Paint black Ser No (e) 10ml/per item. Aluminum Paint Ser No (a) 200 ml/Item, Ser No (b) 700 ml/Item, Ser No (c) 10 ml/Item, Ser No (d) 10 ml/Item, Ser No (j) 150 ml/Item. 10. Re-stacking the same after preservation on proper dunnage incl cleaning around the stack and all as directed by BSO/GE. Note :- (a) All work shall be as directed by Garrison Engineer or Engineer-in-Charge. (b) All materials and tools required for work will be supplied/provided by the contractors/suppliers. (c) All old unwanted scrap material is the property of dept. (d) The following materials will be utilized for the job and will be supplied by the contractor :- (i) Paint OG-30 Ltrs (ii) Paint Black - 06 Ltrs (iii) Paint Aluminum-26 Ltrs (iv) Paint Redoxide-46 Ltrs (v) Turpentine Oil-31 Ltrs (vi) Grease-25 Kgs (vii) Engine Oil-10 Ltrs (viii) French Chalk (5x4+5x0.2)-21 Kgs (ix) Lid for water tank 1500 Ltrs-12 Nos (x) SWR8.4mmx30mtr-05 (xi) Iron Flat 50x06mm-90 Kgs (xii) Aradlite-40 Kgs (xiii) Hardner-40 Kgs (xiv) Carborandum-219 Kgs (xv) Welding Materials-as required (xvi) Welding Machine-08 days (xvii) JCB for 8 Hrs @ Rs1500/hrs for CL12 (xviii) Cleaning Materials- as required.

Radhe RADHE (BID ID -3198136)

ANSH ENTERPRISES (BID ID -3199291)

BANSAL BROTHERS (BID ID -3197862)