Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹12.5 LAccepted-Finance 1627 SECTOR 26 PANCHKULA | L-1 | Accepted-Finance due to lowest | |
| 2 | L-2₹14.3 L+₹1.8 L (14.3%)Rejected-Finance CHANDIGARH | L-2 | Rejected-Finance due to higher | |
| 3 | L-3₹14.3 L+₹1.8 L (14.3%)Rejected-Finance 00 BHUSAR FARM KE PASS K K PURI NANDANPURA JHANSI UTTAR PRADESH 284003 | JHANSI | UTTAR PRADESH | 284003 | L-3 | Rejected-Finance due to higher |
Tender Value
₹19.8 L
EMD Value
₹39,660
Closing Date
4 Nov 2026, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, C.P. Division No.4, Chandigarh
Executive Engineer, C.P. Division No.4, Chandigarh
Modular Cabinets Providing and Laying Paver Block, Repair of Boundary Wall and Miscellaneous Works at Govt. Homeopathic Dispensary Sector-37, Chandigarh
2026_CHD_96466_1
CP4/2026/3220632
Open Tender
Civil Works
Percentage
60 days
Modular Cabinets Providing and Laying Paver Block
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹39,660
5 Nov 2026
28 Oct 2026
4 Nov 2026
28 Oct 2026
4 Nov 2026
28 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil (As per DSR 2.1.1) | 409.06 | /sqm | 126.34 | ₹51,680.64 |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (As per DSR 2.27) | 41.14 | /cum | 2,066.41 | ₹85,012.11 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 25% (As per DSR 4.1.3A) | 2.47 | /cum | 7,448.17 | ₹18,396.98 |
| 3.1 | 1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 10 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) (As per DSR 4.1.10A) | 41.14 | /cum | 4,779.23 | ₹1,96,617.52 |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) (As per DSR 6.1.2) | 5.75 | /cum | 6,939.68 | ₹39,903.16 |
| 5 | Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). 18 mm thick (As per DSR 9.166.1) | 302.43 | /sqm | 1,325.52 | ₹4,00,877.01 |
| 6 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) (As per DSR 9.168) | 20.01 | /sqm | 2,752.86 | ₹55,084.73 |
| 7 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm (As per DSR 9.170.1) | 192 | /each | 181.61 | ₹34,869.12 |
| 8 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. (As per DSR 9.172) | 180 | /each | 861.2 | ₹1,55,016 |
| 9 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (As per DSR 10.1) | 949.43 | /kg | 114.18 | ₹1,08,405.92 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.12 MB
BOQ_118683.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .