ADDN / ALTN AND IMPROVEMENT IN CERTAIN SMQS AT AF STN BKT

Amount

Demolition of cement concrete of any description and in any position and Removing excavated material in 100 m and depositing where directed at a level not exceeding 1.5m above the starting point comple all as specified and directed.

M&L for 75 mm thickness PCC (1:2:4) type -B-2 using 40 mm graded crushed stone aggregate complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0 using12.5mm graded stone aggregate as in floor and finished rough to recive the floor tiles etc complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed.

M&L for Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed. Make : Kajaria/ Varmora.

M&L for non skid ceramic coloured jointless tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed in CM (1:6) etc complete all as sepecified and directed. Make : Somany/ Kajaria/ Varmora.

Ditto all as per item No-07 above but on wall surfaces over and including rendeing 10mm thick in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm/300x600x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM (1:4) complete all as specified and directed. Make/ Somany/ Kajaria/ Varmora.

M&L for machine cut kota stone slab (Minimum size shallbe 550x550 mm) flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing complete,laid over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) complete all as specified and directed.

M&L for machine cut kota stone 20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing set and jointed in neat cement slurry and pointed in white or colour cement to match, the shade/colour of tiles over and including 10 mm thick rendering in cement mortar (1:4) as in riser of steps,skirting,dado & vertical surfaces complete all as specified and directed.

Demolition of reinforced cement concrete of any discription ground to 4th floors and Removing excavated material in 100 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 16 to 18 mm thick Granite (of any type) stone work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15 mm thick CM (1:4) complete all as specified and directed by Engr-in-charge.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoin, arches pillars but excluding ashlar facing dressed stone work and precast concrete article complete all as specified and and directed.

M&L for Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) but except bricks as directed.

M&L for Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

M & L for taking down cement plaster on brick or concrete surfaces walls/chajja/roof,facia at any heigh including racking out joints hacking for key scrubbing down with water etc and rendering 15 mm thick in cement mortar (1:4) on fair face of brick work of walls including mixed with water proofing compound (ISI Marked) @ 2% by weight of cement or as per manufacturer's instructions finished even & smooth without using extra cement complete all as specified including mouldings chamfers splay srounded or coved angles. Beards grooves and rebate upto 10 cms in width or 15 cms in girth. Complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 sqm over and including one coat of wall care putty 1 mm thick over priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm over new surfaces complete all as specified and directed. Note: Putty,Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) Make:- Asian Paint Apex ultima/Berger weather coat long life 10/Nerolac Excel everlast (up to 3rd storey with necessary scaffolding) complete all as specified and directed.

Taking down cement plaster on brick or stone walls or stone walls etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. (Note :- Work will be carried out up to 3rd storey with necessary scaffolding).

Material and labour rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar (1:6) rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by mechanical meens only.

M&L for preparation of newly plastered surfaces and applying two coats of oil emulsion distemper over and including one coats of wall care putty, on new plastered surfaces of walls complete all as specified and directed.Note: Putty,Primer and Emulsion to be carried out through air less spray machine (Mechanical Means) complete all as specified and directed.

M&L for preparation of old distempered surfaces of wall by washing rubbing down and stopping of old distempered surface of wall including cornices etc and 1mm thick of wall care putty as required for levelling and applying two coat of oil bound distemper (Oil emulsion any tint) on wall complete all as specified and directed.Note: Putty,Primer and Emulsion to be carried out through air less spray machine (Mechanical Means)

M&L for rendering 10 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar (1:3) rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation and applying two coat of white wash on new plastered surface of ceiling. complete all as specified and directed

M&L for preparing old decorated surfaces by brooming down or steel wire brushing,scrappingdown smoke soot mould, moss and treading oil and greasy spots from plasterd or unplasterd surfaces of ceiling including cornices,pilasters etc and applying one coats of white wash complete all as specified and directed.

Taking down chowkats or frames (without taking down shutter from the frame) not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames (without taking off shutter from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and not exc. 2.00 sqm each and removing from the site complete all as specified and directed.

Taking down shutters of any description not exc 1.00 Sqm each and removing from the site complete all as specified and directed.

M&L for pressed steel frame of size 105 mm x 60 mm made out of 1.25 mm sheet for doors single rebated including mild steel hinges medium weight 100 mm long and 25 mm x 3 mm flat iron in holdfast, tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc and making good to disturbed surfacs in cement mortar (1:3) or cement concrete (1:2:4) type B-I complete all as specified and directed.

M&L for pressed steel frame of size 125 mm x 60 mm made out of 1.25 mm sheet for doors single rebated including mild steel hinges medium weight 100mm long and 25 mm x 3 mm flat iron in holdfast, tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc complete as specified and making good to disturbed surfacs in cement mortar (1:3) or cement concrete (1:2:4) type B-I etc. complete all as specified and directed.

M&L for 30 mm thick flush shutters, solid core construction, with block board 3 core and plywood face panels, commercial type and laminate on both sides complete all as specified and directed.

M&L for factory made, second class hardwood glazed and skeleton door shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; and fitted to chowkats complete all as specified and directed

S&F providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (112mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. locking arrengment as directed, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories area not exceeding 2.00 sqm each complete all as specified and directed. (Make:- Compreshive/Prominance/Fenesta. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose make as approved written by GE.

S&F for sheet glass 5.50 mm thick, toughned glass, fixed in uPVC windiw including all fitting and fixturres complete all as specified and directed. Make as approved wirtten by GE.

M&L for mild steel 300mm ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed.

S&F for Aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specifed and directed.

M&L for 300 mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed complete all as specified and directed.

S&F Aluminium handles cast type anodised of 150mm complete all as spcecified and directed.

S & F for 100 mm size butt hinges, medium weight cold rolled mild steel, and fixed complete all as specified and directed.

S & F of factory made Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life complete all as specified and directed.

S & F of Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications complete all as specified and directed.

M&L for butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed 100 mm long, type B-21 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for mild steel framed work such as grills, gratings etc with ends of bars, M S pipe shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165 complete all as specified and directed.

S&F for mild steel work as in hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc : flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc, and similar work conforming to FE-290 Gde E-165 complete all as specified and directed.

S & F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of zink chrome primer including necessary rubbing with sand paper or grinded by hand grinder to achieve smooth and even surface. Make:- M/s Asian paint tractrr synthitic distermper/ Nerrlac beacty smooth homodm/ Berger bunty clean or equivalant.

M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description having width/girth exceeding 10 cm complete all as specifie including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where required complete all as specified and as directed. Make:- M/s Asian paint Gattu/ Nerrlac Hi-glass hinis, Berger Betterfly or equivalant.

M&L for preparation of new or previously untreated wood or wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer including necessary putty filling with knife of same colour where required to achieve smooth and even surfaces complete all as specified and and directed. Make:- M/s Asian paint Gattu/ Nerrlac Hi-glass hinis, Berger Betterfly or equivalant.

M&L for applying one coat of synthetic enamel paint to old painted wood surfaces of any description having width/girth exceeding 10 cm complete all asspecifie including preparation and necessary filling by chalk, putty as and where required to make surface even and smooth complete all as specified and directed. Make:- M/s Asian paint Gattu/ Nerrlac Hi-glass hinis, Berger Betterfly or equivalant.

Taking up or down steel tubing of 15 mm bore pipe and connections,including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing of 20 mm bore pipe and connections,including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F 20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete all as specified and directed. Make:- Supreme/ Prayag/ Askal / Prince

Supply and fixing GI tubes 'medium grade' galvanised, 20 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.Make:- Jindal/ TATA/ Prakash Surya

Supply and fixing Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections including dismentling of old unserviceable water tank of capacity 500/1000 Ltr. Complete all as specified .(white colour) Make:- Sintex.

Supply and fixing in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore pipe including making connections complete all as as specified and fixed (Minimum weight 20mm-210 gms). Make: Prayag/ Sintex/Astral/ Prince.

S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, Bore dia of 20 mm complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as specified and directed.

M&L for repairing of concrete surfaces such as balconey, chajjas, upward or downward facias, column, Piller, ceiling and similar items with plain cement concret (1:2:4) type B-0 using 12.5 mm graded stone aggregate & rendering any thickiness in CM (1:3) without using extra cement finished even and fair complete all as specified and directed (Up to 4th storey bldg and including necssory formwork and scaffolding reduired as per site conditions also taking down or dismantiling as required at site).

Supply and fixing in repair sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete with waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make:- Jaquar/Kohler/Grohe

S & F repair Kitchen stainless steel plate rack made out of 2 mm thick sheet wall mounyted and having partitons as per sample. The over all size (915x455x220)mm deep, etc made out of stainless steel grade 304, fixed with steel fastners or steel screw complete. Make:- Jaquar/Kohler/Grohe.

S&F in repair PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed by Engineer-in-charge. Make:- Jaquar/Kohler/Grohe.

S&F in repair WC Orissa pattern white with integral foot rest 580x 440 mm including CI 'P" or 'S' trap 100 mm bore, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition) Make:- Cera, Cat Part No-S3010109 (COVYNA) or equivalent in Jaquar/ Hindware as approved by GE in writting.

S&F in repair CP Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified. Make:- Kohler/ Jaquar/Grohe.

S&F in repair CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. Make:- Kohler/ Jaquar/Grohe.

S&F in repair angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified. Make:- Kohler/ Jaquar/Grohe.

S&F in repair PVC connection 15 mm x 450 mm including PTMT check nut at both ends screwed for iron pipe of 15 mm bore. Make:- Kohler/ Jaquar/Grohe.

S&F in repair Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of waste coupling complete all as specified and as directed by Engineer-in-charge. Make :- Cera, Cat No- S2040119 or equivalent in Jaquar/ Hindware as approved by GE in wirtting.

Supply only sheet glass shelf assembley consisting of 5.5 mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long complete all as specified and directed. Make:- Jaquar, Cat No- AKP-CHR-35771P or equivalent in kohler grohe as approved by GE in wirtting.

S&F in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge. Make:- Jaquar, Cat No- ACN-1173 or equivalent in kohler/ Grohe/ Jaquar as approved by GE in wirtting.

S&F in repair stainless steel Shop dish with PU foam complete all as specified. Make:- Essco, Cat No:- AEC-1131 or equivalent in kohler/ Grohe/ Jaquar as approved by GE in wirtting.

S&F in repair Chromium plated, single towel rail 600mm long complete all as specified. Make:- Essco, Cat No-AEC-1111 or equivalent in kohler/ Grohe/ Jaquar as approved by GE in wirtting.

S & F for brass chromium plated shower rose 300 mm size with swivel joints,and connecting rod including fixing to steel pipe or union complete all as specified and directed. Make:- Kohler/Jaquar/ Grohe.

S&F in repair Brass CP mixer 15 mm bore dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make:- Kohler/ Jaquar/ Grohe.

Supply and fixing CP brass stop cock/angle valve 15mm dia fancy type chromium plated with long sank and cup concealed type complete all as specified. Make: Jaquar/ Kohler/Grohe.

M&L for cutting chases, pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,steps,cills,sunshades,shelves,lintels etc,and cutting chases for concealed water tubing or concealed conduit wiring,etc,and making good,cutting not exc 10cm girth in brick walls. Complete all as specified and directed.

Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed

Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center ,complete all as specified and as directed. Make -Astral/ Supreme/ Finolex.

Supply and fixing UPVC (SWR) type B pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed. Make -Astral/ Supreme/ Finolex.

Supply and fixing UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center ,complete all as specified and as directed by Engineer-in-charge.Make -Astral/ Supreme/ Finolex.

Supply and fixing, UPVC (SWR) , bends with access door for 75 mm bore , complete all as specified and as directed.

Supply and fixing, UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed.

Supply and fixing, UPVC (SWR) , bends for 75 mm bore , complete all as specified and and directed.

Supply and fixing, UPVC(SWR) , bends for 110 mm bore complete all as specified and and directed.

S&F in repair, UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and direceted.

Supply and fixing in repair UPVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L 40 mm dia GI tubing heavy grade galvanised laid over floors as a spout pipe in sunken floors complete all as spcified and directed.

Removal of complete existing water proofing membrane of any description on roof ( including taking down plaster/Demolition of cement concrete if any) surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items etc complete all as specified and and directed

M&L for high performance hybrid plyurea slastomeric waterproofing coating cold applied of spray/brush applied,samrtcare ulton liquid membrance at 1.5kg/sqm with an elongation of 600% and tensile strength of 12.6 n/sqmm as per ASTM D2370,crack bridging ability of 3.5mm as per ASTM C1305,shore a hardness of min 75 as per ASTM D2240.The system smartcare includes final base preparation as per site requirement,epoxy primer application and applying smatcare Ultron or approved equivalent in two coats at a coverage of 1kg/sqm etc complete as per manufacturer specificationincluding removal of old waterproofing system and repairing and cleaning the surface complete all as specified and directed.

M&L for P.C.C. (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope commplete all as specified and directed

M&L for cement concrete 1:2:4 type B1 (20 mm graded agg) as in benching , haunching kerb etc rounded or chamfered on edges including necessary formwork complete all as specified and directed

M&L for rendering 15mm thck in CM (1:3) or Plain Cement Concrete as in sunken floors without extra cement on walls/floors and including mixing of water proofing compound (WPC shall be measured and paid separately)

M&L for applying a coat of bituminous primer conforming to IS-3384 on prepared surface of roof/sunken slab after drying of primer apply APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced torched application and finally apply a coat of hot blown 85/25 graded bitumen conforming to IS-702 @ 1.2kg /sqm of plaster surface. Complete all as specified and directed.

M&L for Cement concrete type E-2, 1:5:10 ( 40 mm graded agregate) in Sunkan ( Up to 4th floor) filling and mass concrete complete all as specified and directed.

S&F in repair 20 to 25mm bore PVC coated fancy type curtain rod with fixing brackerts, stops, rollers etc incl holder as required complete all as specified and directed.

S&F of 18mm factory made water proof commercial board single extruded 100% lead free ISO certified company board of plain white colour (density of board not less than 650kg/cum and manufactured by an ISO 9001:2015 certified company) fixed with screws,solvent cement/adhesive to make kitchen cabinet sides,top and bottom and shelves inside the cabinet complete as per specification and as directed. Make:- Yamuna interiors Pvt Ltd (Brand name-Black cobra)/Giza/M/s Kumar arch tech ltd

S&F of 18mm thick factory made water proof commercial board single extruded 100% lead free ISO certified company board of one side Plain white and other side balancing 0.12 micron prelaminate side(density of board not less than 650kg/cum and manufactured by an ISO 9001:2015 certified company) to make kitchen cabinet shutter/drawer, front shutters,cupboards complete as per specification and as directed by the Engineer -in- charge. Make:- Yamuna interiors Pvt Ltd (Brand name-Black cobra)/Giza/M/s Kumar arch tech ltd

S&F of 12mm thick factory made water proof commercial board board of plain white colour fixed with screws,solvent cement/adhesive to make wall mount/floor kitchen cabinet back and pull out drawer sides/back complete as per specification and as directed by the Engineer -in- charge. Make:- Yamuna interiors Pvt Ltd (Brand name-Black cobra)/Giza/M/s Kumar arch tech ltd

S&F for 20mm wide & 1mm thick PVC EDGE bending of PVC pasted on edgs with suitable adhesive,complete as per specification and and directed.

S&F of auto closing hinges openable at 0 degree for kitchen cabinet shutters complete as per complete all as specification and directed.

S&F of ball bearing runners 45mm telescopic channel(20') full extension load capacity 25kgs complete as per specification and as directed.

S&F of stainless steel handles 100mm size for kitchen cabinet shutters complete as per specification and as directed.

S&F of chrome plated stainless steel wire basket(storage basket) pull out type for large utensils,size 486x500mm with necessary fixing clips etc complete as per specification and as directed.

S&F of chrome plated stainless steel wire basket(jar basket) pull out type for large utensils,size 536 x 500mm with necessary fixing clips etc complete as per specification and directed.

S&F of chrome plated stainless steel wire basket(thali basket) pull out type for large utensils,size 380x500mm with necessary fixing clips etc complete all as specification and directed.

S&F of chrome plated stainless steel wire basket(Grain basket) pull out type for large utensils,size 380x500mm with necessary slinding frame structure, fixing clips etc complete as per specification and as directed.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M deep and getting out in soft/loose soil complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified

Removal of excavated soil to a distance not exc 50 meter and depositing where directed at a level bit exc 1.50 M above the starting point complete all as specified

Demolition and breaking up drain pipe 150mm bore salt glazed stone ware /AC/PVC pipe complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) bedding to drain pipes 150mm internal dia of pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed

M&L for 150 mm bore/Inner Dia. Double wall corrugated HDPE Pipes (S4 ) with integral socket and necessary fittings , laid in trenches jointed complete all as specified Make : Supreme/ Finolex/Askal / Prince

Cutting into existing manholes for connecting new drains, making good to pipe 150mm internal dia of pipe and rendering cutting out existing benching and forming branch channel in PCC (1:2:4) type B-1, smooth finished complete all as specified and directed.

Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets,light fittings etc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed. Note- (i) Dismantled serviceable light fitting shoud be kept in safe custody for reuse. (ii) Refixing of serviceable fitting shall be paid seperately under relevant items-

Refixing of serviceable light fittings upto 22 watt obtained form item no 1 including connecting up&with 3 core flexible cable copper conductor of suitable size from ceiling rose complete all as specified and directed.

Taking down fans/meter/Geyser/Exhaust fan from existing position and removing the same and deposited to MES store and will installed after completion of work.

Taking down ols and unserviceable sub main wiring any size/type /core incl earth wire complete with batten conduit etc complete all as specified and directed.

Taking down old and unserviceable sheet metal enclousure ,switch fuse unit,distribution board any type/way/capacity including fuses mcbs ,insulator rccbs etc copmlete after removing all connection and amking good the disturbed surface complete all as specified and directed.

M & L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt grade in non metallic rigid PVC concelled conduit medium grade 25 mm dia with all accessories mounting all the surface of wall/ceiling/roof/etc with suitable size of module metal flush boxes and including modular front cover plate & back plate for mounting modular type switches /socket/fan/ regulator etc including provision of one single core PVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dolly switch board complete for following- (i) One light point controlled by one switch SP 5 Amps ,240 V Make- Plaza/RR kabels/Polycab/Finolex Make of conduit-AKG/Plaza/Jindal

One fan point controlled by one switch SP 5 Amps ,240 V

One bell/buzzer point controlled by bell push

One 3 pin 5 amps switch socket outlet point on independent board

One 3 pin 5 amps socket point on same board

Ditto all as per the item no herein before but with 2.5 sqmm conductor for 5 pin 15 Amps switch socket outlet.

Ditto all as per item No above but for one light point/fan point controlled by two 2 way switches.

S&F switch modular type 1 module single pole, one way 5 Amps. Make-Goldmedal/Crabtree(Havells)/L&T.

S&F switch modular type 1 module single pole, one way 15 Amps. Make-Goldmedal/Crabtree(Havells)/L&T or equivalent

S&F s socket outlet 2 in 1, 5 pin, 15 Amps modular type 2 module Make-Goldmedal/Crabtree(Havells)/L&T.

S&F socket outlet 5 Amps modular type 2 module Make-Goldmedal/Crabtree(Havells)/L&T.

Ditto all as per item No 12 but Bell push 5 Amps Make-Goldmedal/Crabtree(Havells)/L&T.

Ditto all as per item no 12 above but 5 Amps 2 way Make-Goldmedal/Crabtree(Havells)/L&T.

M&L for ceiling rose,PVC/polycarbonate, isolated body

S&F stepped type electronic fan regulator modular type 1 module Make-Goldmedal/Crabtree(Havells)/L&T.

S&F bell, ding dong type AC, 230 Volt, single pole.

S&F Submain wiring with two single core PVC insulated FRLS-H multistrand copper conductor cable of size 04 Sq mm drawn into and including non metallic medium duty rigid concealed PVC condute not less than 25 mm size ISI marked with all fittings / accessories and 04 Sq mm FRLS-H multistrand copper conductor cable as continuous earth wire complete. (Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate quoted for this items.)

S&F Submain wiring with two single core PVC insulated FRLS-H multistrand copper conductor cable of size 10Sq mm drawn into and including non metallic heavy duty rigid concealed PVC condute not less than 25 mm size ISI marked ivory colour (Pressfit or similar brand ) with all fittings / accessories and 10Sq mm FRLS-H multistrand copper conductor cable as continuous earth wire complete. (Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate quoted for this items.)

S&F Sheet metal enclosure 4 way double door distribution board when MCB to be used TPN 4 way ,415 volt all as specified and directed Make-Indoasian/L&T/Legrand

S&F Sheet metal enclosure 12 way double door distribution board when MCB to be used SPN 240 volt sheet complete all as specified and directed Make-Indoasian/L&T/Legrand

S&F MCB TPN 63-100 Amps 415 volt rupturing cap 10 ka "C" series all as specified and directed. Make-Indoasian/L&T/Legrand

S&F MCB SPN 32 to 40 Amps 240 volt,50 hz,10 KA breaking capacity :C" curved type complete all as specified and directed. Make-Indoasian/L&T/Legrand

S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed.Make-Indoasian/L&T/Legrand

S&F socket outlet 5 pin 20 amp modular type 2 module with suitable size of module metal flux boxes and including modular front cover plate and back plate for mounting modular type switch & socket with one single pole one module MCB of 20 amp including electrical connection all as specified and directed.

Supply and fix angle holder backlite with 1x9 watt LED bulb includig all fixing accessories and making connection with copper conductorcomplete all as specified and directed.

S&F LED light fittings 1x18/20 watt ,220 voltAC decorative box type with driver holder including 18 watt LED tube light connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rse complete .Make-Phillips/Jaguar.

S&F LED security light 45 watt complete with security light bracket (complete with two set of clamp ,nut and bolt) made out of 40 mm medium grade GI pipe bend to shape and with fixing arrangements duly welded (length of pipe should not be less than 1.2 mtrs) and making conection with using 1.5 sqmm PVC insulated multistranded copper conductor two single core cable complete all as specified and directed. .Make-Phillips/Jaguar.

Supply and fixing BLDC ceiling fan complete with blade down rod and accessories 230 V,1400 mm sweep air delivery 245 cfm complete with brusheless direct current motors complete all as specified and directed. Make-Atomberg/Havells/Usha/Phillips

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter volt 230 V 50 Hz RPM 1200 copper winding of sweep 250 mm Make-Phi;;ips/Usha/Bajaj/Havells

Earthing complete with galvanised steel earth plate electrode 60cm x 60cmx6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 M beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC (1:2:4) type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work, complete all as specified and directed.

Supply & fixing round shape 12 Watt 220 Volt AC surface mounted type with high efficiency PMMA diffuser soft glare free light complete with drivers,holders ,LED lamp suitable for roof ceiling including connection up with three core flexible copper conductor cable of suitable size complete.Make :- Philips/Jaguar

Supply & fix decorative Sleek LED mirror light decorative type wall mounted 10 watt rating with diffuser 2ft long twisted flexible copper wire (approx 0.5 mtr long) complete all as specified and directed. Make:- Philips/Jaguar

S&F footlight LED based with chrome collar modular type of 4 module glossy finish 230 volt, 50 Hz complete all as specified and directed. Make-Phillips/Jaguar.

Supply installation and testing of wall mounted autoclean curved shape kitchen chimney of size 410 mm x600mmx475mm filterless, with suction power 1200 to 1400 cum/hr, 230 Volt 50 Hz ,touch/gesture control,speed regulator with one vent along with flexible alluminium duct pipe upto 3.0 meter length,150 mm dia with cowl cover, clamps,tape and accessories all as specified and directed. Make-Faber/Glenn/Crompton/Inalsa

M/S PRATAP BUILDERS (BID ID -3191246)

Industrial Traders (BID ID -3191382)

GIAN ENGINEERS (BID ID -3191391)