Different types of work against deposite scheme 2022-23 in the area of Alambagh and Kanpur Road under jurisdiction of E.E., EUDD-Alambagh and Kanpur Road, LESA, Lucknow

Amount

Safe Loading, Carriage & unloading of following Materials from Centre Store to Pit Site/J.E. Dump Store.

a- Line Material

b- 11 KV 3x185 sq.mm XLPE Cable

c- 11 KV Cable 3x185 sqmm ST Jointing Kit

d- 11 KV cable 3x185 sq.mm ID/OD Joint Kit

e- LT Cable 3.5x240/3.5x150/3.5x70/3.5x400

f- 11 Mtr Long St Pole

g- 33 KV XLPE Cable 3x120 sq.mm.

h- 33 KV Jointing Kit ST 3x120 sq.mm

i- 33 KV Jointing Kit OD 3x120 sq.mm

k- LT Distribution Box

l- ABC 3x95 sqmm

m- LT XLPE 1x400 sq.mm

n- 11 KV Pin Insulator with pin

o- Earthing Complete

p- LT XLPE ST Jointing Kit 3.5x240/3.5x70 sqmm

Dragging of ST Pole digging of pit erection of sub-station type double pole structure on ST Pole with fixing of necessary item such as Top Channel, along with grouting (As per RESPO Norms) Dropper Channel, 11 pin insulator with Pin & 11 KV Disc Insulator with fitting, DO Fuse set its ramming, as per RESPO Specification. Only Pole and insulator will be Provided by the Department.

Dragging of ST Pole to pit site, diging of pit erection and grouting (As per RESPO Norms) of 11 KV line with fixing of necessary item, such as V-type X-arm, F-bracket, 11 KV Pin insulator, Gaurding angle (1.8 mm 65x65x6) with Nut & bolts its ramming as per RESSPO Specification. Only Pole and insulator will be Provided by the Department.

Ordinary earthing by 11 KV MS earth Rod 2500mm long as per RESPO Schedule. All material except earthing wire shall be supplied by the contractor.

Proper laying & commissioning of (3x95 sq.mm) XLPE Aerial Bunched Conductor. Only ABC Provided by deptt.

Laying of 3x185 sq.mm 11 KV XLPE cable and LT Cable 3.5x240/3.5x150/3.5x70/3.5x400 sq mm by drill method as per RESPO Norms. HT/LT cable supplied by Department.

Laying of 3X120 sq.mm 11 KV XLPE cable by drill method as per RESPO Norms. Only 11 KV XLPE cable supplied by Department.

Cable Hosting of 11 KV 3x120/3x185 sq. mm XLPE Cable at the following including jumpering etc complete with help of GI Pipe as Per RESPO Norms. GI pipe and other required material shall be supplied by contractor.

High pressure testing of 11 KV 3x120x3x185 XLPE cable along with arrangement of High Pressure equipment.

Well type earthing of with 60 Fit Deep borring and providing GI Pipe 1.5" dia ("B" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor.

Construction of RCC Plinth 12x6x10 feet as per RESPO Norms. All Material Provided by contractor.

Construction ofWiremesh Fencing 12x6x3 with retaining wall as per RESPO Norms. All Material Provided by contractor.

Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonary in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Construction of masonry/metalic type distribution pillar of size 1x1.5x2.5 mtr. with supply & fixing of fabricated 4 nos. doors (2ft.x4ft.) made of BP sheet of 18 SWG with locking arrangement, 2 Nos. Straight MS angle 50x50x6mm (1800 mm olng) 2 nos. 500 Amp, 3 Nos. 300 Amp henely Type Tailess Funse Unit, 3 Nos coper bus bar of size 1000x50x6 mm and one No. Alum busbar 1000x50x6 mm including all civil material required for work. All material shall be supplied by contractor.

Fabrication, errection & commissioning of 250 KVA T/F on Plinth with all accessories. All material except 250 KVA T/F shall be supplied by the Contractor.

Safe Dismantling of 250 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site.

Fabrication, errection & commissioning of 1000 KVA T/F on Plinth with all accessories. All material except 1000 KVA T/F shall be supplied by the Contractor.

Safe Dismantling of 1000 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site.

Dismanting of RMU Unit & LT Distribution Box and Electric accessories including Safe loading, unloading Carriage from site.

Fixing of Single/Three Phase distribution boxes/Kiosk on the LT poles including all clamps and material required for mounting connections & sealing. Only distribution box Shall be supplied by deptt.

Fencing of boundry wall with support 40x2x50 sqmm

GST Extra as per Rules

B.N. ENTERPRISES

M/S SURAJ ASSOCIATES