Repair and Renovation of E.I work in quarter no. E-1 ( B-Type) for shifting of the O/o The Assistant Engineer, Kolkata North Sub-Division-IV,H.D from C-1 at Govt. R.H.E of 82, Belgachial Road, Kolkata- 700037 under Belgachia Electrical Section, H D

Amount

Dismantling the existing damage wiring and removing of all dismantled materials including the removing of all rubish after cutting the brick wall for conceal wiring and mending the good damages as per G.S

S & F 240 V, 40 A DP MCB with 2 way MCB SS Enclosure with IP-20/30 Protection, powder coated provision for two pole MCB on flat iron frame on wall incl. connection (make Legrand)/ Havells/Standard.

Supply and drawing 2 x 6 sq.mm PVC insulated CU flexible wire from E/meter to MCB incl.socketing at both ends by copper socket and insulated tapes incl supplying of socket and tapes incl finishing with corrogated pipe.

Supply and drawing 1.1 kv graded 2 x 10 sq.mm + 1 x 6 sq.mm PVC insulated CU flexible wire in 19 mm dia polythene pipe in concealed manner in wall and mending good the damages as per G.S from MCB to BDB incl.socketing at both ends.(K.E.I/Filex/)

S & f 250 V 6-32 A per way 2+16 (Enclosure (607713)way SPN MCB DB with SS enclosure double door with 40 A DP (Legrand)/ Havells/Standard. isolator as incomer and 16 nos SP MCB as outgoing concealed in wall after cutting the wall & mending good the damages to original finish including inter-connection with suitable size of copper wire and neutral link and provision for earthing attachment.Make-(Legrand)/ Havells/Standard.)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (approved make) for ECC in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall for horizontal & vertical runs and in suitable size PVC casing-capping (Precision make) for ceiling portion only, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections andmaking earthing attachment and mending good damages to building works [only PVC casing-capping on ceiling and remaining portion concealed](KEI/Finolex)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish- ON BOARD

Supply and Distn. Wiring by 1.1k.V Gr. 3 X 22/0.3 (1.5 sq.mm.) stranded FR’ PVC insulated & unsheathed copper wire (Finolex Make) in 13 mm. dia polythene pipe concealed in wall to 230V. 5/3 pin, 6 Amp. Separate plug point as per G.S.

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply and fixing 150mm x 100mm x 65mm sheet metal switch board with top cover flushed in wall by housing the same aftercutting brick wall incl. making earthing attachment, painting and mending good damages to building works with 2 no 5 A plug socket and 2 no 5A piano key type switch as per G.S.(Separate plug point)

S & drawing 2 x 2.5 sqmm + 1 x 1.5 sqmm PVC insulated multistranded copper wire from BDB to Power Plug points in 13 mm dia polythene pipe in concealed manner in wall and mending good the damages incl Cutting channel of 31 mm x 31 mm size on masonry wall incl.S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building worksas per G.S (POWER PLUG & COMPUTER)

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (POWER PLUG)

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

S & drawing 2 x 4 sqmm + 1 x 2.5 sq.mm(AS ECC) PVC insulated multistranded copper wire from BDB to Power Plug points in 19 mm dia polythene pipe in concealed manner in wall and mending good the damages incl.Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.(FOR AC).

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire. (FOR-AC).

Supply & Fixing 240 V, 25 A, Modular type starter (MK-Northwest) with 25A Modular switch type DP MCB (C-Curve)and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.(FOR AC)

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Supply and Fixing 230mm(9'') dia, 1420 R.P.M exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. Length of PVC insulated wire and making connection for exhaust incl. s& f GI louver shutter on wall with necy. bolts & nuts (6mm dia x 62 mm long)( Non- schedule)(Make:- EPC)

S&F 230V. 400 watt electronic type fan regulator ( Anchor Step type)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.(Existing fan in civil sub-division no-IV office)

Supply anf fixing of 1200 mm sweep ceiling fan complete with blades, canopy,fork, rubber bush etc. incl. S & F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2 x 1.5 sq.mm flexible copper wire incl. Engraving the deppt. number with 10 mm lettering on the body of fan upto 10 letters incl. hifen, stroke or stop Usha Shiker Plus.(Make :Crompton HS PSLUS-1 Star/ Orient/Havells)

Supply and fixing of Single 18/20 Watt LED Luminaire complete with all accessories incl. S& F 18 W lamp( Make: Philips,Cat. No. MAS LED tube Polycarbonate 1200 mm 18 W 865 T8 I Complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener.(Philips-TMC5021XT-LED 22W)

Supplying & Fixing angular batten holder(Anchor) on 75 mm dia PVC round block/round bakelite on wall/ ceiling incl. S&F 09 Watt LED bulb(Make :-Crompton+Bajaj+Surya)

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Add G.S.T 18% on aggregate amount of BOQ item No 1 to 27.

Add LW Cess 1% on aggregate amount of BOQ item No 1 to 27 (after add G.S.T 18 %)

KAUSHIK ENTERPRISE (BID ID -5937608)

DEBNATH ENGINEERING WORKS (BID ID -5926710)