1. RENOVATION TO BLACK PANCHAYAT SERVICE CENTRE BUILDING AT PATHUR PANCHAYAT ((ONE STOP SOCIAL CARE SERVICE CENTREL) Koradachery

Dismantling the Damaged for Brick Work Removing away from the site including all charges etc for completed

Earth work excavation and depositing on bank with in initial lead lift in hard gravelly soil for foundation etc. complete.

Sand filling for foundation with clear river sand including cost of sand, watering ,ramming and consolidation etc complete as directed by TWAD Bord officers

Plain Cement Concrete 1:4:8 (one cement, four sand and eight hard granite broken stone of 40mm size ISS gauge) for foundation and footing including mixing, placing, ramming ,finishing curing etc. complete in accordance with standard specification and as directed by the TWAD Board Officers.

Brick work CM 1:5 mix using good country bricks including cost and conveyance of all materials to site and all labour charges etc complete.

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Plastering with Cement Morter 1:5 mix 12 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing following thickness of cuddapah slab for cupboard including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Pointing with cement mortar 1:3 to full depth of tiles using crudeoil 10% by weight of cement including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

White washing two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc comoplete for 100 Sqm

Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer

Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358

Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)

Supply and Fixing of NEW WINDOW including cost and conveynace and all all labour charge etc., completed

Window (1.20x1.30)

Door (1.50x2.10)

Labour Window

Labour Door

Europeon Water Closet with all fittings and 10lit capacity flusing tank including all Cost and Conveyance of all chages etc

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Provision for Rain water Pipe for110mm Dia including all charges etc

Supplying and fixing colour coated galvanised sheet for roofing including all labour charges for fixing neccesary bolt, nuts, screws, "J" or "U" bolts etc,

supplying and fixing of 50mm SS hand rails vertical support of 50mm SS pipe, including all cost of material to site and labour charges etc…complet

Inner SS Hand Rails

Ramp & Step Hand Rails

Provision for Electrical Arrangement

Supply and fixing of single box type 4'40 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.(SD 88)

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.(SD110)

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box(SD 133

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1 No 40 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection (SD 128)

Supply and run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade on 7 / 20 GI bearer wire for service connection mains (SD 67)

Supplying and fixing in position best quality chromium plated towel rail of 60cm length and 20mm dia with C.P brackets of same material including fixing with necessary T.W Plugs, Brass C.P. screws and dismantling masonry etc., Complete complying with standard specification.

Supplying and fixing in position best approved quality PVCNahini trap of 110 mm x 75 mm size with stainless steel gratings of approved quality fixed over a bed of lime concrete.1:2:5 (one lime two sand and five brick jelly) using 40mm broken brick jelly including dismantling the flooring concrete / Brick masonry wherever necessary and redoing the disturbed portion to the original condition and giving in connection to the PVC soil (stacks) pipe as directed etc., complete complying with standard specifications. (The PVC Nahini trap should be got approved from the Executive Engineer before use on works).

Provision for Sanitary Arrangement

Provision for Sanitary Arrangement

Supply and Filling with M.Sand ,40mm,20mm Metal

Labour charges for erection of new submersible pump set in the bore well including fixing and paintion of submersible cable reiser pipes and all allied works etct

Supply and dlivery of wet type submesible-pump set 1HB( single phase) with Out panel board with bore with is mark and suitable for installation in 150mm dia borewell and the pumpset shold be suppliyed with 5m of flat submersiable copper cale (duty condition-15pmx48m-1HP)

Charges for developing the bore well by required air commpresser of 300 cfm capacity ( minimum 8 Houres) including cost of fule, treansfort, crews erc., complete.

Supply and delivery pand board with IS mark and suitable for 1 HB single phase submersiable pumpset.

Supplying and filling of conveyed earth with a lead of 5Km for basement filling

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Please Enable Macros to View BoQ information