ANNUAL MAINTENCE OF SULLERI LIFT IRRIGATION SCHEME OF CHANNAPTNA TALUK BENGALURU SOUTH DISTRICT

ANNUAL MAINTENCE OF SULLERI LIFT IRRIGATION SCHEME OF CHANNAPTNA TALUK BENGALURU SOUTH DISTRICT

Providing pump operator for maintenance and working of pump, motors, panel boards for 8 to 10 hrs/day pump working duration,(1x30 days= 30man days per month) As per the direction of engineer in-charge...

patkaries (sowdies) (2x30 days=60 man days per month) as per the direction of engineer in charge of work.

Watch Man,(1x30 days= 30 man days per month) as per the direction of engineer in charge of work

Providing and supply at site and refilling new transformer oil to oil cooled starters and transformers. as per the direction of engineer in-charge of the work.

Grease GEM RR3 and etc, complete with all lead and lift loading and unloading as per the direction of engineer in-charge of the work.

Work of overhauling and servicing upto 1250KW, 6.6 KN motor as specified below: a) Disconnect the HT/LT cable and record motor details take out the motor from bed, b) Check alignment and required deta...

Work of replacement faulty control components and modification and rewinding of soft starter panel upto 1250 KW/6.6 Kv motor as specified below: a) Disconnecting the power cable and control cables. b)...

Work of rewinding of HV side upto 100KVA power transformer as specified below: a.Switch off Power supply of transformer Isolator feeder and discharge with discharge rod. b.Disconnect the input and out...

Work of repair and rewinding of LV side upto 100 KVA power transformer as specified below: a. Drain out the contaminated transit oil completely from the reactor; flush the windings of the transformer ...

Work of repairing and servicing of capacitor isolator panel of motors as specified below: A) Dismantling the closing and tripping mechanism, removing the broken, closing lever, cylinder, moving contac...

Work of repairing of diverter switch and replacement of resistance upto 66KV/6.6KV 8MVA Transformer as specified below: Removing the supply connection of diverter switch draining out the diluted oil o...

Supply and brazing of motor end lead cable by using H.T Copper lugs, brazing materials, gas, soldering past, etc as original for all the three phases for motor. As per the direction of engineer in cha...

Removing the burnt out supporting insulator from motor of main side Supply and fixing of new insulator to same place as original. As per the direction of engineer in charge of the work.

Removing the burnt out copper flats form all the 3 phases of neutral side motor. Providing. copper flats copper flats to neutral side connection. Re connect the motor end cable & cable connection usin...