Construction of new record room

Amount

Earth work excavation in hard gravelly soil. Stiff black cotton soil, hard red earth, shales, Murram, gravel, stoney earth mixed with small sized boulders etc., complete as per standard specification.

Plain cement concrete in CC 1:3:6, using 20mm HBG metal including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for plinth beams including cost of cement, all materials, labour, curing, vibration charges, without shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Brick work in CM 1:5 using class II bricks for super structure and pilaster including cost of all materials, labour charges, curing scaffolding charges, curing all leads and lifts etc., complete and as directed by Engineer

Providing steel reinforcement TMT rods up to 16 mm dia for reinforced concrete works, including cost of steel rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete.

Wall Plastering 1:5, 12 mm thick on both sides of brick wall after electrical piping work including the cost of all material, scaffolding charges, cement, labour charges, scaffolding charges, all leads, lifts, as per standard specification.

Filling with excavated earth for filling the foundation and floor including sand, filling charges, with all leads and lifts, watering, consolidation etc., complete.

Flooring for top plastering room with C.M 1:3, 20mm thick smooth finishing including cost of all materials lead, lift, curing etc. complete.

Colour washing two coats using oil bound distemper over one coat of white cement of best quality for inside wall including cost of all materials, labour, curing, all leads & lifts etc., complete, as per standard specification.

Colour washing outside with two coats of cement paint over one coat of white cement of best quality of approved colour including cost of all materials, labour, curing, scaffolding charges, all leads & lifts etc., complete, as per standard specification.

Supply and fixing of colour crimp curve metal roofing sheet of 0.50mm thick of TATA ISI make over M.S. Structure frame work with necessary screws including cost of colour metal roofing sheet, screws for fixing & all required materials, lead, lift, all complete.

Supplying and fixing of Doors (Double leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Iron anodized fittings, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour cost of all materials, leads, lifts labour, etc., complete as per standard specification.

Supplying and fixing of Windows (4 Leaves) of approved size using 35x35x5mm MS angle for outer frame 25x25x3mm angle for shutter frame with shutter 18 gauge M.S. Sheet and 12mm dia bars as horizontal 11 Nos. with necessary locking arrangements including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour, cost of all materials, leads, lifts labour etc., complete.

Wiring with 2x1.50 sq.mm. PVC unsheathed SC copper cable of 1100V. Grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories and with T.W suitable box on wall, covered with hylem sheet of 3mm thick with painting of suitable colour continuous earth wire connection of 14SWG TC. wire for concealed PVC light and fan point. ( SD 23)

Supply and fixing the Industrial type tube light Model No TMS/22/228 HF fitting with 1X28 W T5 essential lamp set philips make or equilvent type.

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stopped electronic 300w regulator with 300mm down rod on the existing clamp.(SD 110

Supplying cuddapah slab polished both sides for Cup-Board 20mm thick including cost of all materials, leads and lifts and fixing in position, including one coat of black paint in both side, etc., complete as per standard specification.

SGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only