Repair Renovation of office Rooms of DLM and FACAO and minor repairs of main gates in SDA Head Quarter Building including wash Rooms at Bemina Srinagar

Amount

Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work

Providing and fixing washable Po Based wall Paper of grade "A",280 gsm and roll length of 33'-0"and width between 0'-21" to 0'-23" of design as approved by Engineer Incharge,Inc all Necessary Chemicals and Labourer for fixing on walls .Complete Job

Providing and fixing 12 mm ply wood on existing frame work for partitions in rooms including nails etc. all complete job

Providing and fixing readymade imported plain panelling with skirting chair rails, and cornice with necessary screws including polishing , complete job in all respects. ,

Providing and fixing readymade PVC panelling including all accessories and cornice with necessary screws,complete job,Design and colour to be decided by the engineer in charge

Providing /fixing various standard CP fittings of approved quality and make complete job. C.P Bib cock 15mm nominal bore.

C.P Angle valve 15mm nominal bore for basin mixer and gyser point.

PVC connection 18"-24" size

Health Faucet

C.P Gratings.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 32 mm dia

Renewing bottom rail and / or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer.

Renewing Wrought Iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts / welding and erection etc. complete. Wheel 50mm dia or below

Providing and fixing chromium plated brass butt hinges with necessary brass screws etc. complete 125x70x4 mm (ordinary type)

Welding, including transportation of plant at site etc. complete By gas plant

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes size 25mm x25mmx3.2mm @1.98kg/m Hot finished welded type tubes size 25mmx25mmx3.2mm @1.98kg/m

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Budloo / Fir wood.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)

Engagement of manual labourers for cleaning bathrooms ,including disposal of the material complete job

Providing and installation 3D LED Digital disply Board with ACP Back Ground and acrylic alphabet (300mm height) capital words, SRINAGAR DEVELOPMENT AUTHORITY with (450mm) Logo Board size 4000x300mm including, fixing wiring & scaffoldeding (complete in all respects) as per directions of Engineer-incharge.

GHULAM QADIR BHAT (BID ID -2300767)