Goa

Financial BO

Works

Civil Works - Others

Construction of Canacona Municipal Building-Furnishing of Office premises and Air conditioning

Goa State Urban Development Agency

Canacona | South Goa, Goa

Amount: ₹75.6 LCloses: 11 Apr 2025Closed

Timeline

Published18 Mar 2025
Closed11 Apr 2025
Technical Evaluation24 Apr 2025
Financial Evaluation25 Nov 2025
Award—

Bids

Item Rate

1 Bid25 Nov 2025

#	Company	Amount	Rank	Status
1	Harshada Trading Company L1₹69.8 LAdmitted-Finance GROUND FLOOR BG 12 CAMPAL TRADE CENTRE CAMPAL MILITARY HOSPITAL CAMPAL PANJIM NORTH GOA 403001 \| PANJIM \| NORTH GOA \| GOA \| 403001	₹69.8 L	L1	Admitted-Finance

BoQ Comparative

Line Items (73)

Sl No	Description	Qty	Unit	Harshada Trading Company L1
1.00	Providing and placing in position - Main Table - Table top (19mm thk), Modesty Panel-600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS 710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager, keyboard & CPU trolley/hanger. a) minimum 2400x900x740mm marked in drawing as MT-1N, as per attached drawing INT-01	3	Each	19,534 ₹58,602 Lowest
2.00	Providing and placing in position - Main Table - Table top (19mm thk), Modesty Panel-600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS 710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager, keyboard & CPU trolley/hanger. b) minimum 1800x900x740mm marked in drawing as MT-2N	3	Each	16,284 ₹48,852 Lowest
3.00	Providing and placing in position - Main Table - Table top (19mm thk), Modesty Panel-600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS 710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager, keyboard & CPU trolley/hanger. c) minimum 1500x600x740mm marked in drawing as MT-3N	31	Each	15,500 ₹4,80,500 Lowest
4.00	Providing and placing in position - Main Table - Table top (19mm thk), Modesty Panel-600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS 710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager, keyboard & CPU trolley/hanger. d) minimum 1450x600x740mm marked in drawing as MT-4N	4	Each	20,000 ₹80,000 Lowest
5.00	Providing and placing in position - Main Table - Table top (19mm thk), Modesty Panel-600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS 710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager, keyboard & CPU trolley/hanger. e) minimum 1200x600x740mm marked in drawing as MT-5N	10	Each	10,000 ₹1,00,000 Lowest
6.00	Providing and placing in position - Main Table - Table top (19mm thk), Modesty Panel-600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS 710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager, keyboard & CPU trolley/hanger. f) minimum 1100x600x740mm marked in drawing as MT-6N	3	Each	8,800 ₹26,400 Lowest
7.00	Providing and placing in position - Main Table - Table top (19mm thk), Modesty Panel-600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS 710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager, keyboard & CPU trolley/hanger. g) minimum 1000x600x740mm marked in drawing as MT-7N	3	Each	12,000 ₹36,000 Lowest
8.00	Providing and placing in position - Return Table . Table top (19mm thk), Modesty Panel - 600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate.. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager a) minimum 1200x450x740mm marked in drawing as RT-1N, as per drawing INT-02	2	Each	12,000 ₹24,000 Lowest
9.00	b) minimum 1000x450x740mm marked in drawing as RT-2N	7	Each	7,500 ₹52,500 Lowest
10.00	Providing and placing in position - Pedestal with drawers (minimum 390x435x507mm). Pedestral top & Sides (19mm thk), Pedestral should have central locking system, 3 equal size drawers and swiveling casters for mobility complete with all necessary hardware etc. Pedestral made of BWP 19mm Plywood (IS710-2010) with all inside and exposed surfaces finished with 1.0mm laminate (glossy/ matt) of approved shade. All external exposed edges to be finished with 2mm PVC beading of matching colour as the laminate. Other internal exposed edges of 19mm plywood to be finished with laminate over TW lipping (6mm min). All edges resting on ground to have teak wood lipping with polish. Drawers also made up of BWP 19mm plywood except base & back of shelves. Drawers bottom & Back to be 12mm BWP plywood. All inside and exposed surfaces finished with 1.0mm laminate of approved shade. All exposed edges to be finished with 2mm PVC beading. Other internal exposed edges of 19mm plywood to be finished with laminate over TW lipping (6mm min). Drawers to be fitted with Powder coated telescopic channels, Multipurpose lock, Handles etc. complete. Marked in drawing as P3DN, as per drawing INT-02.	54	Each	5,768 ₹3,11,472 Lowest

Tender Value

₹75.6 L

EMD Value

₹1.5 L

Closing Date

11 Apr 2025, 5:00 pmClosed

Tender Inviting Organisation

Name

Member Secretary

Address

GSUDA

Work Description

Construction of Canacona Municipal building-Furnishing of Office premises and Air Conditioning

Tender Information

Tender ID

2025_GSUDA_20663_1

Reference Number

43/3/GSUDA/E-Tender/40/2265 dt13/03/2025

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Item Rate

Period of Work

60 days

Location

Canacona

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

4 documents required · 4 mandatory

Fee/PreQual/Technical

RequiredTender Notice (.pdf)

RequiredDocument (.pdf)

RequiredDrawings (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹6,000

EMD Fee Amount

₹1.5 L

Important Dates

Last Activity

25 Nov 2025

Published

18 Mar 2025

Bid Opening

12 Apr 2025

Download Starts

18 Mar 2025

Download Ends

11 Apr 2025

Submission Starts

18 Mar 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Bid Opening

technical_21096.pdf

PDF

Technical Evaluation

techsummary_21096.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.24 MB

Tendernotice_2.pdf

PDF • 1.66 MB

Tendernotice_3.pdf

PDF • 3.38 MB

Work Item Documents

TNF.pdf

Tender Documents • 0.22 MB

Document.pdf

Tender Documents • 1.65 MB

Drawings.pdf

Tender Documents • 3.37 MB

BOQ_21096.xls

BOQ • 0.42 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Harshada Trading Company

L1₹69.8 LAdmitted-Finance

GROUND FLOOR BG 12 CAMPAL TRADE CENTRE CAMPAL MILITARY HOSPITAL CAMPAL PANJIM NORTH GOA 403001 | PANJIM | NORTH GOA | GOA | 403001

Sl No

Description

Qty

Unit

Harshada Trading Company

1.00

Providing and placing in position - Main Table - Table top (19mm thk), Modesty Panel-600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS 710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager, keyboard & CPU trolley/hanger. a) minimum 2400x900x740mm marked in drawing as MT-1N, as per attached drawing INT-01

Each

19,534

₹58,602

Lowest

2.00

Providing and placing in position - Main Table - Table top (19mm thk), Modesty Panel-600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS 710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager, keyboard & CPU trolley/hanger. b) minimum 1800x900x740mm marked in drawing as MT-2N

Each

16,284

₹48,852

Lowest

3.00

Providing and placing in position - Main Table - Table top (19mm thk), Modesty Panel-600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS 710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager, keyboard & CPU trolley/hanger. c) minimum 1500x600x740mm marked in drawing as MT-3N

Each

15,500

₹4,80,500

Lowest

4.00

Providing and placing in position - Main Table - Table top (19mm thk), Modesty Panel-600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS 710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager, keyboard & CPU trolley/hanger. d) minimum 1450x600x740mm marked in drawing as MT-4N

Each

20,000

₹80,000

Lowest

5.00

Providing and placing in position - Main Table - Table top (19mm thk), Modesty Panel-600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS 710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager, keyboard & CPU trolley/hanger. e) minimum 1200x600x740mm marked in drawing as MT-5N

Each

10,000

₹1,00,000

Lowest

6.00

Providing and placing in position - Main Table - Table top (19mm thk), Modesty Panel-600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS 710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager, keyboard & CPU trolley/hanger. f) minimum 1100x600x740mm marked in drawing as MT-6N

Each

8,800

₹26,400

Lowest

7.00

Providing and placing in position - Main Table - Table top (19mm thk), Modesty Panel-600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS 710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager, keyboard & CPU trolley/hanger. g) minimum 1000x600x740mm marked in drawing as MT-7N

Each

12,000

₹36,000

Lowest

8.00

Providing and placing in position - Return Table . Table top (19mm thk), Modesty Panel - 600 deep (19mm thk) and Gable ends/sides (19mm thk) should be made of BWP Plywood (IS710-2010). Top, Modesty & Side panel clad with 1.0mm thk Laminate (glossy/ matt) on all sides (Internal & Exposed) complete with all necessary hardware. All exposed edges to be covered with 2.00mm thick PVC beading of matching colour as the laminate.. All edges resting on ground and not in direct contact to have teak wood lipping. Teak wood lipping to be polished after application of primer. All tables should have independent Wire Manager a) minimum 1200x450x740mm marked in drawing as RT-1N, as per drawing INT-02

Each

12,000

₹24,000

Lowest

9.00

b) minimum 1000x450x740mm marked in drawing as RT-2N

Each

7,500

₹52,500

Lowest

10.00

Providing and placing in position - Pedestal with drawers (minimum 390x435x507mm). Pedestral top & Sides (19mm thk), Pedestral should have central locking system, 3 equal size drawers and swiveling casters for mobility complete with all necessary hardware etc. Pedestral made of BWP 19mm Plywood (IS710-2010) with all inside and exposed surfaces finished with 1.0mm laminate (glossy/ matt) of approved shade. All external exposed edges to be finished with 2mm PVC beading of matching colour as the laminate. Other internal exposed edges of 19mm plywood to be finished with laminate over TW lipping (6mm min). All edges resting on ground to have teak wood lipping with polish. Drawers also made up of BWP 19mm plywood except base & back of shelves. Drawers bottom & Back to be 12mm BWP plywood. All inside and exposed surfaces finished with 1.0mm laminate of approved shade. All exposed edges to be finished with 2mm PVC beading. Other internal exposed edges of 19mm plywood to be finished with laminate over TW lipping (6mm min). Drawers to be fitted with Powder coated telescopic channels, Multipurpose lock, Handles etc. complete. Marked in drawing as P3DN, as per drawing INT-02.

Each

5,768

₹3,11,472

Lowest