REPAIR / MAINT OF INTERNAL WIRING ACCESSORIES AND LED LUMINARIES

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling rose, pendent holder, sockets, regulator, rusted conduit etc and making good disturbed surfaces of walls and floors etc to match with the existing all as specified and directed by Engineer-in-Charge.

Taking down carefully submain wiring / service connection of any type complete with casing caping / conduit etc complete all as specified and as directed by Engineer-in-charge.

Taking down MCB with sheet metal enclosure, main switch, DB, etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed by Engineer in Charge.

Material and labour for Point wiring complete with 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC rigid conduit 20mm dia (heavy duty) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction box, Pressed steel powder coated sunken box of suitable size, 3mm thick bakelite plastic laminated sheet for mounting of switches and socket, fan regulator, for light /fan/ bell point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 Sqmm FRLS PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) to matching with existing surfaces complete all as specified and as directed by Engineer-in-charge. Note:- Switches , sockets etc. shall be measured and paid separately under appropriate item of BOQ.

,----ditto--- All as per srl item No 4 above but for one ceiling/exhaust fan point controlled by one switch and regulator.

,----ditto--- All as per srl item No 4 above but for one bell/buzzer point controlled by one bell push.

,----ditto--- All as per srl item No 4 above but for one three pin 5 Amps socket outlet with 2 pin outlet of 5 Amps on same board all as specified and directed by Engineer-in-charge.

,----ditto--- All as per srl item No 4 above but for one three pin 5 Amps socket outlet with 2 pin outlet of 5 Amps on independent board all as specified and directed by Engineer-in-charge.

,----ditto--- All as per srl item No 4 above but controlled with two No. two way switches all as specified and directed by Engineer-in-charge.

Material and labour for point wiring with 1.5 sqmm, FRLS, single core PVC insulated, unsheathed, multistranded copper conductor cable, with universal colour code drawn in existing steel / PVC conduit / casing capping in existing sunken pressed steel terminal boxes, providing 3 mm thick plastic laminated sheet top cover including 1.5 sqmm PVC insulated, unsheated, multistranded copper conductor cable as earth wire in green colour and making good the disturbed surfaces in cement mortar (1:3), complete all as specified & directed for light point controlled by one switch complete.

,----ditto--- All as per srl item No 10 above but one ceiling/exhaust fan point controlled by one switch and regulator.

,----ditto--- All as per srl item No 10 above but one bell/buzzer point controlled by one bell push.

,----ditto--- All as per srl item No 10 above but for one 3 pin 5 Amps socket outlet on same board with other switch, socket all as specified and directed by Engineer-in-charge.ge.

,----ditto--- All as per srl item No 10 above but for one 3 pin 5 Amps socket outlet on independent board all as specified and directed by Engineer-in-charge.

,----ditto--- All as per srl item No 10 above but point wiring with 4 Sqmm multi stranded copper conductor cable and 2.5 Sqmm unsheated copper conductor cable as earth wire for 2 in 1, 6 pin 15 Amp socket outlet on independent board

,----ditto--- All as per srl item No 10 above but point wiring with 4 Sqmm multi stranded copper conductor cable and 2.5 Sqmm unsheated copper conductor cable as earth wire for 2 in 1, 6 pin 15 Amp socket outlet on independent board

Supply and fixing switch piano flush type, 5/6Amps, 230 volts, single pole, one way fixed on laminated sheet complete all as specified and as directed by Engineer-in-charge. Note:- Laminated sheet shall be measured and paid in point wiring item of BOQ.

Supply and fixing switch piano flush type, 5/6Amps, 230 volts, single pole, two way fixed on laminated sheet complete all as specified and as directed by Engineer-in-charge. Note:-laminated sheet shall be measured and paid in point wiring item of BOQ.

Supply and fixing socket outlet, 3 pin 5 Amp flush type fixed on laminated sheet complete all as specified and as directed by Engineer-in-charge. Note:- Laminated sheet shall be measured and paid in point wiring item of BOQ.

Supply and fixing bell push, flush type, 5/6Amps, 230 volts, fixed on laminated sheet complete all as specified and as directed by Engineer-in-charge. L Note:-Laminated sheet shall be measured and paid in point wiring item of BOQ.

Supply and fixing switch piano flush type, 15/16Amps, 230 volts, single pole, one way fixed on laminated sheet complete all as specified and as directed by Engineer-in-charge. Note:- Laminated sheet shall be measured and paid in point wiring item of BOQ.

Supply and fixing socket outlet 2 in 1, 6 pin 5 Amp and 6 pin 15 Amp flush type fixed on laminated sheet complete all as specified and as directed by Engineer-in-charge. Note:-Laminated sheet shall be measured and paid in point wiring item of BOQ.

S & F in repair sheet metal single pole and neutral enclosure 240 volts with two pin and earth plug & socket complete including one MCB 20 Amp 240 volt SP "C" curve having over load & short circuit protection complete all as specified and directed by Engineer-in-charge. Make :- Legend/standared/siemens/indo.

Supply and fixing lamp holder, PVC / polycarbonate type with back plate including 9 watt LED lamp complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling rose surface Bakelite 3 terminal complete all as specified and as directed by Engineer-in-charge.

Supply and fixing fan regulator electronic socket type 100 watt for ceiling fan complete all as specified by Engineer-in-charge. Make :- Anchor/khaitan/crompton

Supply & Fixing electric Bell, ding dong AC 230 Volts single pole complete all as specified and as directed by Engr-in-charge. Make :- Anchor/khaitan/crompton

S & F in repair LED light fitting 1 x 18/20 Watt, 230 Volts Baton integreated channel type with T-5 tube pre wired for LED tube fixed to ceiling/ wall with necessary wooden /PVC blocks etc and connecting with 2 core flexible PVC insulated multistrand copper conductor from ceiling rose to fitting complete. Make BajajCat part No - BCLSB 18W or equivalent ofPhilips/Crompton/Havells complete all as specified and directed including taking down old one.

S&F in repair recessed mounted square LED down lighter 18 watt with aluminium frame LED panel high quality diffuser for uniform light and high efficiency of size 1 x 1 luminaire with driver and bottom opening complete all as specified and as directed. Make Bajaj Cat Part No - BCTBLR 18 ZTWH 18W or equivalent in crompton/ Havells/Phillips/Syska/Osram/Wipro.

S&F in repair recessed mounted square LED down lighter 36 watt with aluminium frame LED panel high quality diffuser for uniform light and high efficiency of size 2 x 2 luminaire with driver complete all as specified and as directed. Make Bajaj Cat Part No - BZRSQL 36 W GZi or equivalent in crompton/ Havells/Phillips/Syska/Osram/Wipro.

S&F in repair recessed mounted square LED down lighter 15 watt with aluminium frame LED panel high quality diffuser for uniform light and high efficiency of size 1 x 1 luminaire with driver complete all as specified and as directed. Make Bajaj Cat Part No - BGSLO sleek surface 15 W WH SQ 18 W or equivalent in crompton/ Havells/Phillips/Syska/Osram/Wipro.

S&F in repair surface mounted round LED down lighter 18 watt round shape high power LED luminare dome shape opel diffuser with driver complete all as specified and as directed. Make Bajaj Cat Pt No BGCML 18 095 WH or equivalent in crompton/ Havells/Phillips/Syska/Osram/Wipro.

Supply and fixing in repair bulk head fitting with LED of 10 watt complete all as specified and as directed. Make Bajaj Cat Pt No BIBWP 10W LED or equivallent in any of the make mentioned in list of products.

Supply and fixing in repair factory made DB SPN, 12 Way, 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-42,including the following MCB, conforming to IS-8623, BS-5484 dust and vermin proof complete all as specified and directed by Engineer-in-charge. Make : Legrand/Standared/Indo Asian.

Supply and fixing in repair factory made DB SPN, 8 Way, 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-42,including the following MCB, conforming to IS-8623, BS-5484 dust and vermin proof complete all as specified and directed by Engineer-in-charge. Make : Legrand/Standared/Indo Asian.

Supply and fixing in repair factory made DB SPN, 4 Way, 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-42,including the following MCB, conforming to IS-8623, BS-5484 dust and vermin proof complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair factory made DB TPN, 4 Way, 415V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-42,including the following MCB, conforming to IS-8623, BS-5484 dust and vermin proof complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair MCB TP 415 volt 63 amps, rupturing capacity 9 KA,"C" curve with short circuit & over load protection confirming to IS-8828-1996, IEC-60898 complete all as specified and as directed. Make :- Legrand/Standared/Indo Asian.

Supply and fixing in repair MCB SP 240 volt 63 amps, rupturing capacity 9 KA,"C" curve with short circuit & over load protection confirming to IS-8828-1996, IEC-60898 complete all as specified and as directed. Make :- Legrand/ABB/Siemens

Supply and fixing in repair MCB SPN 240 volt 32 amps, rupturing capacity 9 KA,"C" curve with short circuit & over load protection confirming to IS-8828-1996, IEC-60898 complete all as specified and as directed. Make :- Legrand/Standared/Indo Asian.

Supply and fixing in repair MCB single pole 240 volt 6-32 amps rupturing capacity 9 KA,"C" curve with short circuit & over load protection confirming to IS-8828-1996, IEC-60898 complete all as specified and as directed. Make :- Legrand/Standared/Indo Asian.

Supply and fixing in repair MCB TPN 415 volt 63 amps, rupturing capacity 9 KA,"C" curve with short circuit & over load protection confirming to IS-8828-1996, IEC-60898 complete all as specified and as directed. Make :- Legrand/Standared/Indo Asian.

Material and labour for sub main wiring in replacement with 6 Sqmm single core (Two run) FRLS PVC insulated multistrand copper conductor drawn through and including PVC conduit 25mm dia (heavy duty) on independent circuit from DB and including one run 6 Sqmm FRLS PVC insulated unsheathed multi strand copper conductor continues as earth wire connected to earth dolly etc. including all fitting arrangement i.e. PVC clamp, rawl plug, screw, junction box, terminal box, tee, bend etc. and including taking down old sub main wiring of PVC insulated aluminium conductor cable two single core 6 Sqmm or any size including GI earth wire from conduit including taking out/down rusted conduit, including making good disturbed surfaces of walls/ceiling etc. complete all as specified and as directed by Engineer-in-charge. Note :-Three run of 6 Sqmm copper wire and one run conduit shall be measured as one length.

Material and labour for sub main wiring in replacement with 10 Sqmm single core (Four run) FRLS PVC insulated multistrand copper conductor drawn through and including PVC conduit 32mm dia (heavy duty) on independent circuit from DB and including one run 6 Sqmm FRLS PVC insulated unsheathed multi strand copper conductor continues as earth wire connected to earth dolly etc. including all fitting arrangement i.e. PVC clamp, rawl plug, screw, junction box, terminal box, tee, bend etc. and including taking down old sub main wiring of PVC insulated aluminium conductor cable two single core 10 Sqmm or any size including GI earth wire from conduit including taking out/down rusted conduit, including making good disturbed surfaces of walls/ceiling etc. complete all as specified and as directed by Engineer-in-charge. Note :-Four run of 10 Sq mm, one run of 6 sqmm copper wire and one run conduit shall be measured as one length.

Supply, laying and testing in replacement of Cable of size 10 Sqmm, 2 core, 1100 Volt grade heavy duty with PVC insulated, stranded aluminium conductor served with an inner sheathening of PVC tape and over all PVC Sheathed stranded conductor in service connection suspended by insulating hangers not less than 1 metre apart including 4 mm GI suspended wire and necessary connections and suitable size of thimbling complete all as specified and as directed by Engineer-in-charge.

Material and labour for Earthing complete with galvanised iron earth plate electrode of size 60 x 60 x 0.60 cm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including earth continuity GI wire 4 mm (upto test point from earth plate and test point to DB) by means of GI bolts/nuts/washers and including protected by 15mm dia GI light grade protection pipe from earth plate to test point, including making of test point. Earth plate shall be surrounded by packed layer of char coal/coke & salt all around bottom and top with alternative layer. 20mm GI light grade pipe for watering (should be 10cm above GL) and including socket, plug, funnel, wire mesh, CI cover and frame, PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in earthing pit including necessary form work, excavation & earth work, all as specified & shown in electrical plate No. 3 of SSR Part – I. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner.

S & F LED building security light fitting 25 watt with epoxy powder coated sheet aluminium housing, with epoxy powder coated CRCA sheet steel grey tray, clear acrylic cover and accessories complete incl street light bracket made out of 25 mm dia GI light grade pipe 0.6 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminium silver paint over a coat of primer after taking down old u/s one. Make of fitting Bajaj Cat Pt No BRLEP 25 W LED or equivallent in any of the make mentioned in list of products.

S & F in repair door hinges of sheet metal cabinet of 22 SWG including necessary welding and painting of cabinet of CRCA sheet of size 660 x 660 x 200mm with two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

Singla Electricals

Aggarwal brothers and company