Construction of Module Change Workshop MCW Shed and Allied Works including Civil Electrical and Air conditioning works at Air force Station NAL Bikaner

HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION

NAME OF THE WORK: Construction of Module Change Workshop [MCW], Shed and Allied Works including Civil, Electrical and Air-conditioning works at Air force Station NAL, Bikaner. CONTRACT NO. HAL/FMD/C-150/24-25

Name of the Contractor :

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with relevant CPWD specifications amended upto date/ detailed technical specification in tender document and tender drawings if any.

Part - 'I' - Civil and Allied Works

1 Carriage of materials by Mechanical Transport including loading, unloading and stacking upto 2km distance, etc., all complete as directed by Engineer-in-Charge. 250.00 Cu m 202.71 Rupees Two Hundred Two and Seventy One Paise Only 50677.50

2 Banking excavated earth in all kinds of soil by mechanical / manual means in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc, lead upto 50m and for all lift, etc., all complete as directed by Engineer-in-Charge. 484.00 Cu m 163.19 Rupees One Hundred Sixty Three and Nineteen Paise Only 78983.96

3 Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and for all lift, etc., all complete as directed by Engineer-in-Charge. 231.00 Cu m 146.37 Rupees One Hundred Forty Six and Thirty Seven Paise Only 33811.47

4 Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m, etc., all complete as directed by Engineer-in-Charge. 3387.00 Cu m 214.65 Rupees Two Hundred Fourteen and Sixty Five Paise Only 727019.55

5 Excavating trenches in all kinds of soil by mechanical / manual means of required width for pipes, cables, etc., exceeding 80 mm dia. but not exceeding 300 mm dia including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m, etc., all complete as directed by Engineer-in-Charge. 1535.00 meter 290.39 Rupees Two Hundred Ninety and Thirty Nine Paise Only 445748.65

6 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift, etc., all complete as directed by Engineer-in-Charge. 2903.00 Cu m 161.62 Rupees One Hundred Sixty One and Sixty Two Paise Only 469182.86

7 Extra filling all kinds of soil for every additional lift of 1.50m or part thereof in excavation / banking excavated or stacked materials, etc., all complete as directed by Engineer-in-Charge. 1308.00 Cu m 104.56 Rupees One Hundred Four and Fifty Six Paise Only 136764.48

8 Supplying and filling in plinth with sand under floors including watering, ramming, consolidating and dressing, etc., all complete as directed by Engineer-in-Charge. 528.00 Cu m 1751.20 Rupees One Thousand Seven Hundred Fifty One and Twenty Paise Only 924633.60

9 Providing and laying in position cement concrete of specified grade 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40mm nominal size derived from natural sources) up to plinth level excluding the cost of centering and shuttering, etc., all complete as directed by Engineer-in-Charge. 419.00 Cu m 5617.02 Rupees Five Thousand Six Hundred Seventeen and Two Paise Only 2353531.38

10 Centering and shuttering including strutting, propping etc. and removal of form work for sub items mentioned below, etc., all complete as directed by Engineer-in-Charge.

a) Foundations, footings, bases of columns, etc., for mass concrete 1113.00 Sq m 323.37 Rupees Three Hundred Twenty Three and Thirty Seven Paise Only 359910.81

b) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses, etc., 375.00 Sq m 694.72 Rupees Six Hundred Ninety Four and Seventy Two Paise Only 260520.00

c) Suspended floors, roofs, landings, balconies and access platform 2300.00 Sq m 764.60 Rupees Seven Hundred Sixty Four and Sixty Paise Only 1758580.00

d) Lintels, beams, plinth beams, girders, bressumers and cantilevers 3175.00 Sq m 607.23 Rupees Six Hundred Seven and Twenty Three Paise Only 1927955.25

e) Columns, Pillars, Piers, Abutments, Posts and Struts 2233.00 Sq m 792.67 Rupees Seven Hundred Ninety Two and Sixty Seven Paise Only 1770032.11

f) Stairs, (excluding landings) except spiral-staircases 59.00 Sq m 630.77 Rupees Six Hundred Thirty and Seventy Seven Paise Only 37215.43

g) Weather shade, Chajjas, corbels, etc., including edges 105.00 Sq m 784.27 Rupees Seven Hundred Eighty Four and Twenty Seven Paise Only 82348.35

11 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping, etc., including cost of de-shuttering and decentering at all levels, over a height of 3.50m, for every additional height of 1 metre or part thereof for Suspended floors, roofs, landing, beams and balconies (Plan area to be measured), etc., all complete as directed by Engineer-in-Charge. 3245.00 Sq m 316.89 Rupees Three Hundred Sixteen and Eighty Nine Paise Only 1028308.05

12 Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources), etc., all complete as directed by Engineer-in-Charge. 5.00 Cu m 8728.89 Rupees Eight Thousand Seven Hundred Twenty Eight and Eighty Nine Paise Only 43644.45

13 Steel reinforcement for R.C.C. work Thermo-Mechanically Treated bars of grade Fe-550 or more including straightening, cutting, bending, placing in position and binding all complete upto plinth level, etc., all complete as directed by Engineer-in-Charge. 86829.00 Kgs 88.94 Rupees Eighty Eight and Ninety Four Paise Only 7722571.26

14 Steel reinforcement for R.C.C. Thermo-Mechanically Treated bars of grade Fe-550 or more work including straightening, cutting, bending, placing in position and binding all complete above plinth level, etc., all complete as directed by Engineer-in-Charge. 104111.00 Kgs 88.94 Rupees Eighty Eight and Ninety Four Paise Only 9259632.34

15 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections, etc., all complete as directed by Engineer-in-Charge. 137.00 R m 64.66 Rupees Sixty Four and Sixty Six Paise Only 8858.42

16 Providing and laying in position ready mixed or site batched design mix cement concrete of M35 grade with minimum cement content of 370 kg/cum for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer-in-Charge; for the following grades of concrete all works upto plinth level. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement 853.00 Cu m 8086.38 Rupees Eight Thousand Eighty Six and Thirty Eight Paise Only 6897682.14

17 Concrete of M35 grade with minimum cement content of 370 kg/cum all works above plinth level upto floor V level, etc., all complete as directed by Engineer-in-Charge. 1042.00 Cu m 8379.64 Rupees Eight Thousand Three Hundred Seventy Nine and Sixty Four Paise Only 8731584.88

18 Providing and fixing 18 mm thick gang saw cut Granite stone slab of colour black, Cherry/Ruby red, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels, etc., all complete as directed by Engineer-in-Charge.

a) Area of slab upto 0.50 Sq m 5.00 Sq m 4463.85 Rupees Four Thousand Four Hundred Sixty Three and Eighty Five Paise Only 22319.25

b) Area of slab over 0.50 Sq m 9.00 Sq m 4235.28 Rupees Four Thousand Two Hundred Thirty Five and Twenty Eight Paise Only 38117.52

19 Extra for fixing marble / granite stone, over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin based adhesive, including cleaning, etc., all complete as directed by Engineer-in-Charge. 18.00 R m 468.82 Rupees Four Hundred Sixty Eight and Eighty Two Paise Only 8438.76

20 Providing and fixing Granite stone slab with table rubbed, edges rounded and polished, of size [75 x 50]cm deep and 1.80cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size), etc., all complete as per direction of Engineer-in-Charge and finished smooth. 5.00 Sq m 3341.07 Rupees Three Thousand Three Hundred Forty One and Seven Paise Only 16705.35

21 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30kg per Sq m, including pointing in white cement mixed with pigment of matching shade, etc., all complete as directed by Engineer-in-Charge. 293.00 Sq m 1045.53 Rupees One Thousand Forty Five and Fifty Three Paise Only 306340.29

WOOD AND PVC WORK

22 Providing Second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), etc., all complete as directed by Engineer-in-Charge. 2.00 Cu m 117872.94 Rupees One Lakh Seventeen Thousand Eight Hundred Seventy Two and Ninety Four Paise Only 235745.88

23 Providing and fixing M.S. grills of required pattern Fixed to openings / wooden frames, etc., with rawl plugs screws etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer, etc., all complete as directed by Engineer-in-Charge. 3241.00 Kgs 196.55 Rupees One Hundred Ninety Six and Fifty Five Paise Only 637018.55

24 Providing and fixing chromium plated brass 100mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws, etc., all complete as directed by Engineer-in-Charge. 34.00 Each 823.23 Rupees Eight Hundred Twenty Three and Twenty Three Paise Only 27989.82

25 Providing and fixing aluminium hanging floor door Twin rubber stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws, etc., all complete as directed by Engineer-in-Charge. 19.00 Each 59.67 Rupees Fifty Nine and Sixty Seven Paise Only 1133.73

26 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section [90 x 45]mm having single rebate of [32 x 15]mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, etc., all complete as directed by Engineer-in-Charge. 47.00 R m 470.80 Rupees Four Hundred Seventy and Eighty Paise Only 22127.60

27 Providing and fixing to existing door frames 30mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, etc., all complete as directed by Engineer-in-Charge. 18.00 Sq m 3701.49 Rupees Three Thousand Seven Hundred One and Forty Nine Paise Only 66626.82

28 Providing & Fixing 1mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality, etc., all complete as directed by Engineer-in-Charge. 114.00 Sq m 739.90 Rupees Seven Hundred Thirty Nine and Ninety Paise Only 84348.60

29 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. 8.00 each 6898.54 Rupees Six Thousand Eight Hundred Ninety Eight and Fifty Four Paise Only 55188.32

30 Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc.

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod pf approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS:16231 shall be paid separately. Casement window double panels with fixed mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles.

Using R3 series with frame (55mm & above ) x (45mm & above) & sash (55mm & above) x (65mm & above) & mullion (55mm & above) x (65mm & above). (Height upto 1.8 meter). 3.00 Sq m 10284.91 Rupees Ten Thousand Two Hundred Eighty Four and Ninety One Paise Only 30854.73

31 Fixed window / ventilator with mullion / transom.

a) Using R1 series with frame (33mm & above ) x (35mm & above) & mullion (33mm & above) x (50mm & above). (Height upto 0.90 meter) 21.00 Sq m 7549.17 Rupees Seven Thousand Five Hundred Forty Nine and Seventeen Paise Only 158532.57

b) Using R4 series with frame (64mm & above ) x (50mm & above) & mullion (64mm & above) x (70mm & above). (Height above 2.5 meter) 12.00 Sq m 5383.50 Rupees Five Thousand Three Hundred Eighty Three and Fifty Paise Only 64602.00

32 Providing and fixing Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screen sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system, (Height upto 1.8m), etc., all complete as directed by Engineer-in-Charge. 175.00 Sq m 8966.62 Rupees Eight Thousand Nine Hundred Sixty Six and Sixty Two Paise Only 1569158.50

33 Providing and fixing stainless steel (SS-304 grade) friction hinges of size [250 x 19 x 1.90]mm to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws, etc., all complete as directed by Engineer-in-Charge. 15.00 Each 348.44 Rupees Three Hundred Forty Eight and Forty Four Paise Only 5226.60

34 Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws, etc., all complete as directed by Engineer-in-Charge. 170.00 Each 168.23 Rupees One Hundred Sixty Eight and Twenty Three Paise Only 28599.10

35 Providing and fixing steel roller for uPVC sliding window with necessary screws, etc., all complete as directed by Engineer-in-Charge. 332.00 Each 95.50 Rupees Ninety Five and Fifty Paise Only 31706.00

36 Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer-in-Charge . (Cost of SS ball bearing hinges is excluded). 29.00 R m 1816.47 Rupees One Thousand Eight Hundred Sixteen and Forty Seven Paise Only 52677.63

37 Providing and fixing 60mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-Charge (panelling to be paid for seperately). 12.00 Sq m 9908.95 Rupees Nine Thousand Nine Hundred Eight and Ninety Five Paise Only 118907.40

38 Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm, etc., all complete as directed by Engineer-in-Charge. 1.00 Sq m 36015.56 Rupees Thirty Six Thousand Fifteen and Fifty Six Paise Only 36015.56

39 Providing and fixing bright /matt finished of size 125mm Stainless Steel handles of approved quality & make with necessary screws, etc., all complete as directed by Engineer-in-Charge. 156.00 each 98.30 Rupees Ninety Eight and Thirty Paise Only 15334.80

40 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge. 63703.00 Kgs 110.26 Rupees One Hundred Ten and Twenty Six Paise Only 7023892.78

41 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron Using flats 40x40x6mm for diagonal braces and central cross piece and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge. 3.00 Sq m 4786.14 Rupees Four Thousand Seven Hundred Eighty Six and Fourteen Paise Only 14358.42

42 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 80x1.25 mm M.S. laths with 1.25 mm thick top cover, 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters, etc., all complete as directed by Engineer-in-Charge. 127.00 Sq m 3012.35 Rupees Three Thousand Twelve and Thirty Five Paise Only 382568.45

43 Providing and fixing ball bearing for rolling shutters, etc., all complete as directed by Engineer-in-Charge. 14.00 each 405.99 Rupees Four Hundred Five and Ninety Nine Paise Only 5683.86

44 Extra for providing mechanical device chain and crank operation for operating rolling shutters, Exceeding 10.00 Sq m and upto 16.80 Sq m in the area, etc., all complete as directed by Engineer-in-Charge. 127.00 Sq m 1056.58 Rupees One Thousand Fifty Six and Fifty Eight Paise Only 134185.66

45 Steel work in built up Hot finished welded type tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers, etc., all complete as directed by Engineer-in-Charge. 2665.00 Kgs 160.31 Rupees One Hundred Sixty and Thirty One Paise Only 427226.15

46 Providing and fixing mild steel round holding down bolts with nuts and washer plates, etc., all complete as directed by Engineer-in-Charge. 260.00 Kgs 80.16 Rupees Eighty and Sixteen Paise Only 20841.60

47 Steel work welded in built up sections / framed work In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, etc., as required, etc., all complete as directed by Engineer-in-Charge. 9239.00 Kgs 142.33 Rupees One Hundred Forty Two and Thirty Three Paise Only 1314986.87

48 Providing and fixing stainless steel ( Grade 316) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-Charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 716.00 Kgs 636.91 Rupees Six Hundred Thirty Six and Ninety One Paise Only 456027.56

49 Providing & fixing fly proof Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts, etc., all complete as directed by Engineer-in-Charge. 181.00 Sq m 934.71 Rupees Nine Hundred Thirty Four and Seventy One Paise Only 169182.51

50 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps, etc., all complete as directed by Engineer-in-Charge. 358.00 Sq m 806.82 Rupees Eight Hundred Six and Eighty Two Paise Only 288841.56

51 Providing and laying 25mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand), etc., all complete as directed by Engineer-in-Charge. 63.00 Sq m 1606.49 Rupees One Thousand Six Hundred Six and Forty Nine Paise Only 101208.87

52 Providing and laying Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing, etc., all complete as directed by Engineer-in-Charge. 20.00 Sq m 1941.64 Rupees One Thousand Nine Hundred Forty One and Sixty Four Paise Only 38832.80

53 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab, etc., all complete as directed by Engineer-in-Charge. 129.00 R m 157.84 Rupees One Hundred Fifty Seven and Eighty Four Paise Only 20361.36

54 Extra for Kota stone/ sand stone in treads of steps and risers using single length above normal size up to 2.00 metre, etc., all complete as directed by Engineer-in-Charge. 63.00 Sq m 36.41 Rupees Thirty Six and Forty One Paise Only 2293.83

55 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment, etc., all complete as directed by Engineer-in-Charge. 124.00 Sq m 904.20 Rupees Nine Hundred Four and Twenty Paise Only 112120.80

56 Providing and laying Double charge Vitrified polished finish tiles in floor of sizes [600 x 600]mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily, etc., all complete as directed by Engineer-in-Charge. 582.00 Sq m 1198.66 Rupees One Thousand One Hundred Ninety Eight and Sixty Six Paise Only 697620.12

57 Providing and laying Vitrified tiles of size [600 x 600]mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments, etc., all complete as directed by Engineer-in-Charge. 324.00 Sq m 1338.34 Rupees One Thousand Three Hundred Thirty Eight and Thirty Four Paise Only 433622.16

58 Grouting the joints of flooring tiles of size [600 x 600]mm having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing, etc., all complete as directed by Engineer-in-Charge. 1030.00 Sq m 254.84 Rupees Two Hundred Fifty Four and Eighty Four Paise Only 262485.20

59 Providing and fixing on wall face 110mm dia unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes, etc., all complete as directed by Engineer-in-Charge. 330.00 R m 311.21 Rupees Three Hundred Eleven and Twenty One Paise Only 102699.30

60 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories as mentioned below for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, etc., all complete as directed by Engineer-in-Charge.

a) 110mm bend 56.00 each 123.99 Rupees One Hundred Twenty Three and Ninety Nine Paise Only 6943.44

b) 110mm Shoe 56.00 each 108.73 Rupees One Hundred Eight and Seventy Three Paise Only 6088.88

61 Providing and fixing unplasticised -PVC pipe clips of 110mm size of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall, etc., all complete as directed by Engineer-in-Charge. 329.00 each 306.17 Rupees Three Hundred Six and Seventeen Paise Only 100729.93

62 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams, etc., all complete as directed by Engineer-in-Charge. 56.00 each 45.12 Rupees Forty Five and Twelve Paise Only 2526.72

63 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, etc., all complete as directed by Engineer-in-Charge. 210.00 Sq m 609.08 Rupees Six Hundred Nine and Eight Paise Only 127906.80

64 Providing and fixing precoated galvanised steel sheet roof gutter [600mm over all girth] 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws, etc., all complete as directed by Engineer-in-Charge. 70.00 R m 1083.26 Rupees One Thousand Eighty Three and Twenty Six Paise Only 75828.20

65 Providing 12mm thick plastering in 1:6 (1 cement: 6 fine sand), etc., all complete as directed by Engineer-in-Charge. 4437.00 Sq m 274.88 Rupees Two Hundred Seventy Four and Eighty Eight Paise Only 1219642.56

66 Providing 15mm thick cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand), etc., all complete as directed by Engineer-in-Charge. 312.00 Sq m 329.39 Rupees Three Hundred Twenty Nine and Thirty Nine Paise Only 102769.68

67 Providing 18mm thick cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge, etc., all complete as directed by Engineer-in-Charge. 2122.00 Sq m 443.17 Rupees Four Hundred Forty Three and Seventeen Paise Only 940406.74

68 Providing 6mm thick cement plaster 1:3 (1 cement : 3 fine sand), etc., all complete as directed by Engineer-in-Charge. 6770.00 Sq m 247.75 Rupees Two Hundred Forty Seven and Seventy Five Paise Only 1677267.50

69 Finishing New walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm, etc., all complete as directed by Engineer-in-Charge. 2969.00 Sq m 149.46 Rupees One Hundred Forty Nine and Forty Six Paise Only 443746.74

70 Providing Twp coats Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour, etc., all complete as directed by Engineer-in-Charge. 10862.00 Sq m 117.76 Rupees One Hundred Seventeen and Seventy Six Paise Only 1279109.12

71 Painting Two or more coats on new work with synthetic enamel paint of approved brand and manufacture to give an even shade, etc., all complete as directed by Engineer-in-Charge. 3214.00 Sq m 186.57 Rupees One Hundred Eighty Six and Fifty Seven Paise Only 599635.98

72 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth, etc., all complete as directed by Engineer-in-Charge. 10862.00 Sq m 128.68 Rupees One Hundred Twenty Eight and Sixty Eight Paise Only 1397722.16

73 Supplying and stacking at site aggregates ain sub items mentioned below, etc., all complete as directed by Engineer-in-Charge.

a) 90mm to 45mm size stone aggregate 534.00 Cu m 1730.30 Rupees One Thousand Seven Hundred Thirty and Thirty Paise Only 923980.20

b) 53mm to 22.40mm size stone aggregate 534.00 Cu m 1519.12 Rupees One Thousand Five Hundred Nineteen and Twelve Paise Only 811210.08

74 Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density, etc., all complete as directed by Engineer-in-Charge. 1068.00 Cu m 863.30 Rupees Eight Hundred Sixty Three and Thirty Paise Only 922004.40

75 Fencing With G.I. barbed wire with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles, etc., all complete as directed by Engineer-in-Charge. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. 1554.00 R m 18.23 Rupees Eighteen and Twenty Three Paise Only 28329.42

76 Providing and applying tack coat On W.B.M. @ 0.75 Kg / sqm using hot straight run bitumen of grade VG - 10 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications, etc., all complete as directed by Engineer-in-Charge. 1885.00 Sq m 49.89 Rupees Forty Nine and Eighty Nine Paise Only 94042.65

77 Providing and laying design mix cement concrete prepared with batch mixing machine of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camberfinishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. 41.00 Cu m 8682.26 Rupees Eight Thousand Six Hundred Eighty Two and Twenty Six Paise Only 355972.66

78 Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A, etc., all complete as directed by Engineer-in-Charge. 789.00 Per cm depth per cm width per meter length 4.38 Rupees Four and Thirty Eight Paise Only 3455.82

79 Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge. 142.00 Cu m 9177.17 Rupees Nine Thousand One Hundred Seventy Seven and Seventeen Paise Only 1303158.14

80 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand, etc. all complete as per the direction of Engineer-in-Charge. 130.00 Sq m 801.50 Rupees Eight Hundred One and Fifty Paise Only 104195.00

81 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-Charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-Charge) 72.00 Cu m 8342.74 Rupees Eight Thousand Three Hundred Forty Two and Seventy Four Paise Only 600677.28

82 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm Made of G.I. wire of dia. 4mm, PVC coated to achieve outer dia not less than 5mm in required colour and shade including strengthening with 2 mm dia wire or nuts, bolts and washers as required, etc., all complete as per the direction of Engineer-in-Charge 576.00 Sq m 879.91 Rupees Eight Hundred Seventy Nine and Ninety One Paise Only 506828.16

83 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush, etc., complete as per specifications and directions of Engineer-in-Charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). 473.00 Cu m 8100.48 Rupees Eight Thousand One Hundred and Forty Eight Paise Only 3831527.04

Sanitary Installation

84 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, etc., all complete as directed by Engineer-in-Charge. 10.00 Each 5372.58 Rupees Five Thousand Three Hundred Seventy Two and Fifty Eight Paise Only 53725.80

85 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required, etc., all complete as directed by Engineer-in-Charge.

a) Single half stall urinal with 5 litre P.V.C. automatic flushing cistern 10.00 Each 9954.09 Rupees Nine Thousand Nine Hundred Fifty Four and Nine Paise Only 99540.90

b) Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern 1.00 Each 14849.60 Rupees Fourteen Thousand Eight Hundred Forty Nine and Sixty Paise Only 14849.60

86 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required, etc., all complete as directed by Engineer-in-Charge.

a) White Vitreous China Wash basin size [630 x 450]mm with a single 15mm C.P. brass pillar tap 14.00 Each 1835.80 Rupees One Thousand Eight Hundred Thirty Five and Eighty Paise Only 25701.20

b) White Vitreous China Flat back wash basin size [550 x 400]mm with single 15mm C.P. brass pillar tap 2.00 Each 1549.56 Rupees One Thousand Five Hundred Forty Nine and Fifty Six Paise Only 3099.12

87 Providing and fixing Stainless Steel with drain board of 510x1040 mm bowl depth 200 mm A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required, etc., all complete as directed by Engineer-in-Charge. 1.00 Each 5903.15 Rupees Five Thousand Nine Hundred Three and Fifteen Paise Only 5903.15

88 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of approved quality and make, etc., all complete as directed by Engineer-in-Charge. 10.00 Each 287.91 Rupees Two Hundred Eighty Seven and Ninety One Paise Only 2879.10

89 Providing and fixing 32mm dia flexible pipe P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings, etc., all complete as directed by Engineer-in-Charge. 17.00 Each 98.59 Rupees Ninety Eight and Fifty Nine Paise Only 1676.03

90 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing, etc., all complete as directed by Engineer-in-Charge.

a) Rectangular shape [453 x 357]mm 4.00 Each 1122.92 Rupees One Thousand One Hundred Twenty Two and Ninety Two Paise Only 4491.68

b) Rectangular shape [1500 x 450]mm 5.00 Each 1725.84 Rupees One Thousand Seven Hundred Twenty Five and Eighty Four Paise Only 8629.20

91 Providing and fixing C.P. brass toilet paper holder of approved manufacture, etc., all complete as directed by Engineer-in-Charge. 14.00 Each 662.73 Rupees Six Hundred Sixty Two and Seventy Three Paise Only 9278.22

92 Providing and fixing 100mm dia soil, waste and vent pipes Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905, etc., all complete as directed by Engineer-in-Charge. 320.00 mtr 964.18 Rupees Nine Hundred Sixty Four and Eighteen Paise Only 308537.60

93 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket, etc., all complete as directed by Engineer-in-Charge. 2.00 each 12711.15 Rupees Twelve Thousand Seven Hundred Eleven and Fifteen Paise Only 25422.30

94 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, Concealed work, including cutting chases and making good the walls, etc., all complete as directed by Engineer-in-Charge.

a) 20mm nominal dia Pipes 30.00 R m 443.30 Rupees Four Hundred Forty Three and Thirty Paise Only 13299.00

b) 25mm nominal dia Pipes 30.00 R m 517.23 Rupees Five Hundred Seventeen and Twenty Three Paise Only 15516.90

c) 32mm nominal dia Pipes 40.00 R m 609.62 Rupees Six Hundred Nine and Sixty Two Paise Only 24384.80

95 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints at External work, etc., all complete as directed by Engineer-in-Charge.

a) 40mm nominal dia Pipes 50.00 R m 464.28 Rupees Four Hundred Sixty Four and Twenty Eight Paise Only 23214.00

b) 50mm nominal dia Pipes 60.00 R m 654.93 Rupees Six Hundred Fifty Four and Ninety Three Paise Only 39295.80

c) 62.50mm nominal inner dia. Pipes. 60.00 R m 1380.68 Rupees One Thousand Three Hundred Eighty and Sixty Eight Paise Only 82840.80

96 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end), etc., all complete as directed by Engineer-in-Charge.

a) 25mm nominal bore 10.00 Each 513.23 Rupees Five Hundred Thirteen and Twenty Three Paise Only 5132.30

b) 20mm nominal bore 4.00 Each 445.24 Rupees Four Hundred Forty Five and Twenty Four Paise Only 1780.96

c) 32mm nominal bore 4.00 Each 568.64 Rupees Five Hundred Sixty Eight and Sixty Four Paise Only 2274.56

d) 40mm nominal bore 4.00 Each 681.19 Rupees Six Hundred Eighty One and Nineteen Paise Only 2724.76

e) 50mm nominal bore 10.00 Each 846.56 Rupees Eight Hundred Forty Six and Fifty Six Paise Only 8465.60

f) 65mm nominal bore 4.00 Each 1436.55 Rupees One Thousand Four Hundred Thirty Six and Fifty Five Paise Only 5746.20

97 Providing and fixing 15mm nominal bore uplasticised PVC connection pipe of 45 cm length with brass unions, etc., all complete as directed by Engineer-in-Charge. 32.00 Each 80.62 Rupees Eighty and Sixty Two Paise Only 2579.84

98 Providing and fixing 15mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931, etc., all complete as directed by Engineer-in-Charge. 20.00 Each 417.90 Rupees Four Hundred Seventeen and Ninety Paise Only 8358.00

99 Providing and fixing 15mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms, etc., all complete as directed by Engineer-in-Charge. 2.00 Each 658.80 Rupees Six Hundred Fifty Eight and Eighty Paise Only 1317.60

100 Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, etc., all complete as directed by Engineer-in-Charge. 28.00 Each 473.56 Rupees Four Hundred Seventy Three and Fifty Six Paise Only 13259.68

101 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality, etc., all complete as directed by Engineer-in-Charge. 60.00 Each 61.69 Rupees Sixty One and Sixty Nine Paise Only 3701.40

102 Providing and fixing 25mm nominal bore PTMT Ball cock, 152mm long, weighing not less than 440 gms of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball, etc., all complete as directed by Engineer-in-Charge. 18.00 Each 431.92 Rupees Four Hundred Thirty One and Ninety Two Paise Only 7774.56

103 Providing and fixing 15mm nominal bore unplasticised P.V.C. connection pipe with with 30cm length PTMT Nuts, collar and bush of approved quality and colour, etc., all complete as directed by Engineer-in-Charge. 32.00 Each 79.45 Rupees Seventy Nine and Forty Five Paise Only 2542.40

104 Providing and fixing 50mm nominal bore vertical gun-metal non-return valve of approved quality (screed end), etc., all complete as directed by Engineer-in-Charge. 4.00 Each 1191.65 Rupees One Thousand One Hundred Ninety One and Sixty Five Paise Only 4766.60

105 Providing and fixing square-mouth S.W. gully trap class SP-1 [150 x 100]mm size P typecomplete with C.I. grating brick masonry chamber With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design, etc., all complete as directed by Engineer-in-Charge. 10.00 Each 2254.56 Rupees Two Thousand Two Hundred Fifty Four and Fifty Six Paise Only 22545.60

106 Providing and laying 300mm dia. on-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints, etc., all complete as directed by Engineer-in-Charge. 160.00 R m 819.89 Rupees Eight Hundred Nineteen and Eighty Nine Paise Only 131182.40

107 Constructing brick masonry manhole With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), etc., all complete as directed by Engineer-in-Charge. 23.00 Each 10530.30 Rupees Ten Thousand Five Hundred Thirty and Thirty Paise Only 242196.90

108 Constructing brick masonry circular manhole With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 with 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design, 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering, etc., all complete as directed by Engineer-in-Charge. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 8.00 Each 20369.31 Rupees Twenty Thousand Three Hundred Sixty Nine and Thirty One Paise Only 162954.48

109 Constructing brick masonry chamber With common burnt clay F.P.S. (non modular) bricks of class designation 3.5 for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design, Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets, etc., all complete as directed by Engineer-in-Charge. 34.00 Each 6720.72 Rupees Six Thousand Seven Hundred Twenty and Seventy Two Paise Only 228504.48

110 Providing soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design, etc., all complete as directed by Engineer-in-Charge. 2.00 Each 22149.69 Rupees Twenty Two Thousand One Hundred Forty Nine and Sixty Nine Paise Only 44299.38

111 Providing and fixing Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) work for Fixed portions of doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, etc., all complete as per architectural drawings and the directions of Engineer-in-Charge. (Glazing, paneling and dash fasteners to be paid for separately) 91.00 Kgs 408.22 Rupees Four Hundred Eight and Twenty Two Paise Only 37148.02

112 For shutters of Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) for doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately, etc., all complete as directed by Engineer-in-Charge. 73.00 Kgs 493.60 Rupees Four Hundred Ninety Three and Sixty Paise Only 36032.80

113 Providing and fixing glazing With float glass panes of 5mm thickness (weight not less than 12.50 kg/Sq m) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item): 221.00 Sq m 1241.20 Rupees One Thousand Two Hundred Forty One and Twenty Paise Only 274305.20

114 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant), etc., as per specifications, drawings and direction of Engineer-in-Charge. 4.00 Sq m 4121.00 Rupees Four Thousand One Hundred Twenty One Only 16484.00

115 Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. (Only weight of grill to be measured for payment). 4.00 Kgs 526.38 Rupees Five Hundred Twenty Six and Thirty Eight Paise Only 2105.52

116 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry, etc., all complete as directed by Engineer-in-Charge. 44.00 Sq m 508.81 Rupees Five Hundred Eight and Eighty One Paise Only 22387.64

117 Providing and laying integral cement based water proofing treatment With average thickness of 120mm and minimum thickness at khurra as 65mm including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/Sq m of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs.

(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/Sq m of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of [300 x 300]mm square 3mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge. Note: Performance Guarentee bond for 5 Years for leak proof roofing shall be given by the contractor on Non judicial stamp paper of Rs.500/-. The 10% of completed value of this item shall be dedcuted as defect Liability Deposit and the same shall be returned after sucessful completion of 5 Years from the date of completion of contract. 942.00 Sq m 1389.09 Rupees One Thousand Three Hundred Eighty Nine and Nine Paise Only 1308522.78

New technologies

118 Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-Charge. 6.00 Sq m 4411.95 Rupees Four Thousand Four Hundred Eleven and Ninety Five Paise Only 26471.70

119 Providing and fixing mineral fibre false ceiling tiles at all heights With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended

from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-Charge. 245.00 Sq m 1924.24 Rupees One Thousand Nine Hundred Twenty Four and Twenty Four Paise Only 471438.80

120 Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand), etc., all complete as directed by Engineer-in-Charge. 180.00 Cu m 6091.36 Rupees Six Thousand Ninety One and Thirty Six Paise Only 1096444.80

121 Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level in Cement mortar 1:6 (1 cement : 6 coarse sand), etc., all complete as directed by Engineer-in-Charge. 522.00 Cu m 8117.67 Rupees Eight Thousand One Hundred Seventeen and Sixty Seven Paise Only 4237423.74

122 Supplying and mixing crystalline waterproofing admixture in cement concrete works for water retaining structures like sumps, OHT etc., in proportions as specified by the manufacturer's specification, etc., all complete as directed by the Engineer-in-Charge. 112.00 Kgs 325.00 Rupees Three Hundred Twenty Five Only 36400.00

123 Supplying and fixing swellable type water stop tape of cross-section around (19 x 25) mm & having a water pressure resistance of atleast 5 bar for construction joint treatment of R.C.C. water storage tanks & sumps including adhesive / sealant, preparation of surface etc., all complete as per manufacturer's specifications and as directed by the Engineer-in-Charge. 110.00 R m 673.00 Rupees Six Hundred Seventy Three Only 74030.00

124 Providing and fixing GSM fibre wire mesh with necessary screws and nails for fixing in at the joints of RCC and masonry work of required width as per drawing and specification and direction of Engineer-in-charge. GSM fibre wire mesh should be as per relevant specifications. 2060.00 Sq m 86.00 Rupees Eighty Six Only 177160.00

125 Providing and fixing 40mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, Stainless Steel butt hinges with necessary screws, etc., all complete as directed by the Engineer-in-Charge. 59.00 Sq m 2754.00 Rupees Two Thousand Seven Hundred Fifty Four Only 162486.00

126 Providing and fixing stainless steel sliding door bolts of size 250x16 mm, ISI markedwith nuts and screws, etc., all complete as directed by the Engineer-in-Charge. 32.00 Each 473.00 Rupees Four Hundred Seventy Three Only 15136.00

127 Providing and fixing stainless steel tower bolts of size 200x10 mm, ISI marked with necessary screws, etc., all complete as directed by the Engineer-in-Charge. 64.00 Each 70.00 Rupees Seventy Only 4480.00

128 Providing and applying 5 mm thick Epoxy Flooring with sealer coat as item include first coat with primer, second coat of epoxy self levelling screed with 3 mm thick over primer coat, third coat of Epoxy Primer, Fourth coat 2 mm thick self levelling pigmented epoxy topping and final coat with sealer coat etc, complete as per manufacturers specification and as per directions of Engineer-in-Charge. 1600.00 Sq m 1765.00 Rupees One Thousand Seven Hundred Sixty Five Only 2824000.00

129 Extra for supplying and laying concrete surface floor hardner minimum 4.5 to 5.0 kgs per sqm. Sprinkle the hardener onto the screed concrete evenly in 2 stages, first stage 60% and second stage 40%. Care must be taken to apply the product without creating ripples etc. in the concrete surface. The first application must be worked into the slab immediately followed by application of the second stage quantity. Final finishing, closing pores and removing undulations can be achieved by powered trowel. The work shall be complete as per manufacturer's specification and as directed by the Engineer-in-Charge. 13234.00 Kgs 17.00 Rupees Seventeen Only 224978.00

130 Extra for supplying and laying chemical treatment concrete surface floor densification as per manufacturer's specification all complete as directed by the Engineer-in-Charge. 2647.00 Sq m 250.00 Rupees Two Hundred Fifty Only 661750.00

131 Providing, laying and fixing self-supported roofing system, Proflex / JSP roofing for span between 28 to 30 meter (in width) and arch rise between 4.0 m to 5.0 m with pre painted Galvalume coated steel sheets standard conforms to ASTM A792M/IS 15965-2012. The rate of this item includes followings (a) Transportation of the materials from the factory to the site, loading, unloading, storage at site, (b) Installation of fabricated panels will be done using Hydraulic Telescopic Crane (c) Supplying all necessary fittings/fixtures required for fixing the sheet. (d) All arrangements like cranes, scaffoldings, labours, electricity etc. (e) Providing Hangers with all accessories required for fixing electrical fittings etc and all complete as per manufacturer specification, specified in this document and as per direction of Engineer in Charge. 2030.00 Sq m 2065.00 Rupees Two Thousand Sixty Five Only 4191950.00

132 Providing, laying and fixing self-supported roofing system, Proflex / JSP roofing for span between 12 to 15 meter in width and arch rise between 4.0 m to 5.0 m with pre painted Galvalume coated steel sheets standard conforms to ASTM A792M/IS 15965-2012. The rate of this item includes followings (a) Transportation of the materials from the factory to the site, loading, unloading, storage at site, (b) Installation of fabricated panels will be done using Hydraulic Telescopic Crane (c) Supplying all necessary fittings/fixtures required for fixing the sheet. (d) All arrangements like cranes, scaffoldings, labours, electricity etc. (e) Providing Hangers with all accessories required for fixing electrical fittings etc and all complete as per manufacturer specification, specified in this document and as per direction of Engineer in Charge. 309.00 Sq m 1398.00 Rupees One Thousand Three Hundred Ninety Eight Only 431982.00

133 Supplying and fixing in position 50 mm thick factory made insulated sandwich panel for roofing and cladding, with facings made up of pre-painted galvalume, not less than 0.45 mm thick on top and 0.40 mm to the bottom with min 550 Mpa yield strength. The core material shall be made up of rigid polyurethane foam (PUF) conforming to IS 12436 and of density around 40+ 2 kg/M3 fixed with self tapping screws including necessary supplementary fittings, joint fillers, joint laps, making provision for accessories, necessary cutouts/openings, supports for joinery as required etc., all complete as per manufacturer specification, specified in this document and as per direction of Engineer in Charge. 316.00 Sq m 2528.75 Rupees Two Thousand Five Hundred Twenty Eight and Seventy Five Paise Only 799085.00

134 Supplying and fixing in position 19 mm XLPE Insulation One side Alu-Pet Foil, (Male - Female) including necessary supplementary fittings, joint fillers, joint laps, making provision for accessories, necessary cutouts/openings, supports for electrical fittings as required etc., all complete as per manufacturer specification, specified in this document and as per direction of Engineer in charge. (1.2 x 20 mtr = 24 Sqm x 104 Rolls) 2339.00 Sq m 368.00 Rupees Three Hundred Sixty Eight Only 860752.00

135 Providing and fixing countertop wash basin of make PARRYWARE cascade NXT or equivalent make and model with size around 500x380x120 along with 15 mm cp brass pillar cock with extension body (FLR-CHR-5021M) or equivalent make, 32 mm CP brass waste, cutting of hole in counter all complete as per directed by Engineer in charge including painting of fittings and brackets, cutting and making good the walls wherever require and all complete as per direction of Engineer-in-Charge. 2.00 Each 10000.00 Rupees Ten Thousand Only 20000.00

136 Providing and fixing C.P. brass 2-way bib cock (FLR-CHR-5041N) with wall flange of jaguar brand or equivalent make of approved quality conforming to IS:8931 :15 mm nominal diameter 10.00 Each 2450.00 Rupees Two Thousand Four Hundred Fifty Only 24500.00

137 Providing and fixing Stainless Steel grating of approved quality and colour, rectangle type with openable circular lid 150 mm nominal size square, 100 mm diameter of inner hinged round grating. 27.00 Each 300.00 Rupees Three Hundred Only 8100.00

138 Providing and fixing C.P. brass towel ring (CAN-CHR-1121BN) round with round flange of jaguar brand or equivalent make of approved quality. 14.00 Each 1350.00 Rupees One Thousand Three Hundred Fifty Only 18900.00

139 Providing and fixing 110x110x110 mm Single tee with door SWR fittings/ accessories for SWR drainage pipes Type B, including jointing with Adhesive, and all complete as per direction of Engineer-in-Charge. 36.00 Each 300.00 Rupees Three Hundred Only 10800.00

140 Providing and fixing 110mm Door bend SWR fittings/ accessories for SWR drainage pipes Type B, including jointing with Adhesive, and all complete as per direction of Engineer-in-Charge. 36.00 Each 200.00 Rupees Two Hundred Only 7200.00

141 Providing and 110x110 mm Floor multi trap fixing SWR fittings/ accessories for SWR drainage pipes Type B, including jointing with Adhesive, etc., all complete as per direction of Engineer-in-Charge. 36.00 Each 400.00 Rupees Four Hundred Only 14400.00

142 Providing and fixing C.P. brass Health faucet (ALD-CHR-565) with 8 mm dia, 1.2 m long flexible tube and wall hook of jaguar brand or equivalent make of approved quality, etc., all complete as per direction of Engineer-in-Charge. 12.00 Each 1301.00 Rupees One Thousand Three Hundred One Only 15612.00

143 Providing and fixing testing and commissioning of 15mm dia CP sink cock with swinging spout (Deck mounted model) for kitchen sink with CP wall flange, etc., all complete as per direction of Engineer-in-Charge. 2.00 Each 2250.00 Rupees Two Thousand Two Hundred Fifty Only 4500.00

144 Providing and fixing Tanker Water Inlet Connection with 2 Nos. of 100mm inlet, etc., all complete as per direction of Engineer-in-Charge. 2.00 Each 2150.00 Rupees Two Thousand One Hundred Fifty Only 4300.00

145 Supply, installation, testing and commissioning of Submersible pump 30m head with 3HP capacity motor of 3 Phase, 415V, 50Hz and rate shall also be inclusive of DOL (Direct online) with overload protection relay mounted in weather proof (IP65) protection MS box with RYB indicators, volt meter and ammeter, etc. complete as per manufacturers specifications. FOR DOMESTIC SUMP-01 Make: Grundfos or equivalent, etc., all complete as per direction of Engineer-in-Charge. 4.00 Each 85000.00 Rupees Eighty Five Thousand Only 340000.00

146 Supply, delivery, installation, testing, commissioning of water level controller having photo sensor for avoiding switching the pump on, digital display of water level in the sump/tank, trigger for automatic operation of pumpset when the water level reaches low level, including fixing necessary stainless steel sensors, float level switch, probes, etc. The rate shall also include the control cabling from panel to sump/tank, making connections from the level controller to the pump starter, necessary conduiting, cabling etc. complete. The work has to be done by qualified electrical contractor only. Make: L&T or equivalent, etc., all complete as per direction of Engineer-in-Charge. 1.00 Each 22500.00 Rupees Twenty Two Thousand Five Hundred Only 22500.00

147 Providing and laying at or near ground level factory made Saucer drain (300 x 300 x 80 mm) in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand) over 20mm thick bed mortar 1:3 (1 cement: 3 coarse sand) complete etc. as per direction of Engineer-in-charge 479.00 R m 551.00 Rupees Five Hundred Fifty One Only 263929.00

148 Providing and fixing PVC waste Drainage 6kg/cm2 pipe including jointing with adhesive, etc., all complete as per direction of Engineer-in-Charge.

a) 110mm dia 80.00 R m 428.00 Rupees Four Hundred Twenty Eight Only 34240.00

b) 160mm dia 210.00 R m 778.00 Rupees Seven Hundred Seventy Eight Only 163380.00

c) 200mm dia 90.00 R m 1194.00 Rupees One Thousand One Hundred Ninety Four Only 107460.00

d) 250mm dia 55.00 R m 1792.00 Rupees One Thousand Seven Hundred Ninety Two Only 98560.00

e) 315mm dia 55.00 R m 2851.00 Rupees Two Thousand Eight Hundred Fifty One Only 156805.00

149 Providing and fixing 110mm dia SWR waste pipes type-b including jointing with adhesive as per the direction of Enginee-in-charge. 50.00 R m 415.00 Rupees Four Hundred Fifteen Only 20750.00

150 Providing and laying water proofing treatment to the mother slab and inner surfaces of walls of over head water tank, sump tank etc by applying (i) First coat of Brush bond RFX @ DFT 1mm thick of M/S Fosroc chemicals or equivalent as per manufacturers specification.This coat is to be air cured for 6 hours. (ii) Second coat of brush bond RFX @ DFT 1mm thick of Fosroc chemicals or equivalent as per manufacturers specisication.This coat is to be air cured for 6 hours. Both First and Second coat together should have minimum DFT 1.50mm thick

(iii)Third coat of bond coat with cement slurry mixed with SBR latex @ 3 litres per bag of cement applied as per manufacturers specification to get good bonding with next layer. (iv) Fourth coat of 12mm thick cement plaster in cement mortar 1:3 ( 1 cement: 3 coarse sand) with floating coat of neat cement punning both admixed with conplast X421 IC of Fosroc or Pidi Proof 101 LW of pidilite or equivalent applied before the air curing of third layer.The rate includes preparation of surface treatment , removal of dust from surface using compressed air and sealing of all joints, corners, junctions of pipes and RCC with polymer mixed slurry, etc., all complete as per direction of Engineer-in-Charge. 115.00 Sq m 845.00 Rupees Eight Hundred Forty Five Only 97175.00

Part - 'I' - Civil and Allied Works Rupees Nine Crore Ninety Three Lakh Eight Thousand One Hundred Fifteen and Thirty Eight Paise Only 99308115.38

Part - 'II A' - Electrical, Voice, Data and Fire Alarm Works

Sec - 'II' Electrical Works

1 Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group C wiring) 246.00 Point 1321.92 Rupees One Thousand Three Hundred Twenty One and Ninety One Paise Only 325191.15

2 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 2.00 Point 1407.52 Rupees One Thousand Four Hundred Seven and Fifty One Paise Only 2815.03

3 Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

3.1 3 x 2.5 sq. mm (For lighting ckt from DB to Switch box, For 6A power Points) 1553.00 Metre 247.81 Rupees Two Hundred Forty Seven and Eighty Paise Only 384841.30

3.2 3 x 4 sq. mm(For 16A power points) 4291.00 Metre 300.97 Rupees Three Hundred and Ninety Six Paise Only 1291445.54

4 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single cable in the existing surface/recesses steel/PVC conduit as required.

4.1 2Cx6 Sq.mm 296.00 Metre 194.64 Rupees One Hundred Ninety Four and Sixty Three Paise Only 57612.14

5 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

5.1 25mm dia 783.00 Metre 130.66 Rupees One Hundred Thirty and Sixty Six Paise Only 102307.58

5.2 40mm dia 968.00 Metre 205.45 Rupees Two Hundred Five and Forty Four Paise Only 198874.78

6 Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size pheonlic laminated sheet cover in front including painting etc. as required

6.1 150mmx75mmx60mm deep 19.00 Each 194.64 Rupees One Hundred Ninety Four and Sixty Three Paise Only 3698.08

7 Supplying and fixing Two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc.as required. 1.00 Each 332.51 Rupees Three Hundred Thirty Two and Fifty Paise Only 332.51

8 Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required... 80.00 Each 36.04 Rupees Thirty Six and Four Paise Only 2883.39

9 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/ 6 & 15/ 16 amps modular socket outlet and 15/ 16 amps modular switch, connection etc. as required. 135.00 Each 528.04 Rupees Five Hundred Twenty Eight and Four Paise Only 71285.72

10 Providing and fixing of extra conduit down rod of 20mm dia, 2x10cm length, wiring with 2x 1.5 Sq. mm FRLS PVC insulated. copper conductor, single core cable including paiting et. as required ( Note: More than 5 cm length shall be routed to the nearest 10 cm and 5 cm or less shall be ignored) 1.00 Each 49.56 Rupees Forty Nine and Fifty Five Paise Only 49.56

11 Supply ,drawing and testing of Cat 6 UTP 4-Pair cable in the existing PVC conduits / wall / above false ceiling, including necessary interconnections for LAN & Internet point as directed by Engineer-in-charge. 7876.00 Metre 51.36 Rupees Fifty One and Thirty Six Paise Only 404546.07

12 Wiring for Group controlled (looped) light point /fan point/exhaust fan point/ call bell point (without independent switch etc.,) with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit and earthing the point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable etc. as required Group C 88.00 Point 773.14 Rupees Seven Hundred Seventy Three and Fourteen Paise Only 68036.68

13 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/ 6 amps modular socket outlet and 2 nos. 5/6 A modular switch, connection etc. as required. (For light plugs to be used in non residential buildings) 55.00 Each 609.14 Rupees Six Hundred Nine and Fourteen Paise Only 33502.92

14 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, paiting etc. as required 5.00 Each 655.10 Rupees Six Hundred Fifty Five and Ten Paise Only 3275.51

15 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

15.1 12way SPN, Double door 7.00 Each 2086.05 Rupees Two Thousand Eighty Six and Five Paise Only 14602.36

15.2 16way SPN, Double door 2.00 Each 2830.36 Rupees Two Thousand Eight Hundred Thirty and Thirty Six Paise Only 5660.73

16 Supplying and fixing following way, horizontal type threee pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

16.1 6way TPN (4+18), Double door 1.00 Each 4482.08 Rupees Four Thousand Four Hundred Eighty Two and Seven Paise Only 4482.08

16.2 8way TPN (4+24), Double door 8.00 Each 5376.87 Rupees Five Thousand Three Hundred Seventy Six and Eighty Seven Paise Only 43014.98

17 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10KA , "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

17.1 Single pole 222.00 Each 230.68 Rupees Two Hundred Thirty and Sixty Seven Paise Only 51210.51

17.2 Double pole 6.00 Each 591.12 Rupees Five Hundred Ninety One and Eleven Paise Only 3546.71

18 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

18.1 40 A 1.00 Each 391.98 Rupees Three Hundred Ninety One and Ninety Eight Paise Only 391.98

18.2 63A 1.00 Each 474.88 Rupees Four Hundred Seventy Four and Eighty Eight Paise Only 474.88

19 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

19.1 40 A 7.00 Each 874.07 Rupees Eight Hundred Seventy Four and Six Paise Only 6118.47

19.2 63 A 6.00 Each 931.74 Rupees Nine Hundred Thirty One and Seventy Three Paise Only 5590.42

20 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 100-300 ma in the existing MCB DB complete with connections, testing and commissioning atc. as required.

20.1 25 A 19.00 Each 1827.43 Rupees One Thousand Eight Hundred Twenty Seven and Forty Three Paise Only 34721.21

20.2 40 A 13.00 Each 2380.71 Rupees Two Thousand Three Hundred Eighty and Seventy One Paise Only 30949.25

20.3 63 A 1.00 Each 2452.80 Rupees Two Thousand Four Hundred Fifty Two and Seventy Nine Paise Only 2452.80

21 Supplying and fixing following rating, double pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 100-300 ma in the existing MCB DB complete with connections, testing and commissioning atc. as required.

21.1 40A 2.00 Each 2872.71 Rupees Two Thousand Eight Hundred Seventy Two and Seventy One Paise Only 5745.42

21.2 63 A 1.00 Each 2587.97 Rupees Two Thousand Five Hundred Eighty Seven and Ninety Six Paise Only 2587.97

22 Providing and fixing M.V. danger notice plate of 200 mmx 150mm, made of mild steel, at lease 2mm thick, and vitreous anameled white on both sides, and with insciption in single red colour on front side as required. 4.00 Each 242.40 Rupees Two Hundred Forty Two and Thirty Nine Paise Only 969.59

23 Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 71.00 Metre 875.87 Rupees Eight Hundred Seventy Five and Eighty Seven Paise Only 62186.97

24 Supplying and laying 25 mm x 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with nut, bolt, spring, washer etc. as required. (jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 1185.00 Metre 129.76 Rupees One Hundred Twenty Nine and Seventy Six Paise Only 153768.81

25 Providing and fixing earth bus of 50mm x5mm copper strip on surface for connections etc. as required 17.00 Metre 1904.03 Rupees One Thousand Nine Hundred Four and Two Paise Only 32368.43

26 Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 Cm at the bottom and 50 cm X 50 Cm at the top with a thickness of 10 cm including inscription duly engraved as required. 26.00 Each 527.14 Rupees Five Hundred Twenty Seven and Fourteen Paise Only 13705.75

27 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required

27.1 Upto 4Cx10 Sq. mm (25mm) 12.00 Each 242.40 Rupees Two Hundred Forty Two and Thirty Nine Paise Only 2908.78

27.2 Upto3.5Cx25 Sq. mm (28mm) 12.00 Each 282.04 Rupees Two Hundred Eighty Two and Four Paise Only 3384.51

27.3 Upto 3.5Cx185 Sq. mm (57mm) 6.00 Each 788.47 Rupees Seven Hundred Eighty Eight and Forty Six Paise Only 4730.80

27.4 Upto 3.5Cx300 Sq. mm (70mm) 6.00 Each 1076.81 Rupees One Thousand Seventy Six and Eighty One Paise Only 6460.88

28 Excavation for cable trenches in soft soil, depth upto 1.2m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with soil after laying of cable/pipe etc in layers of 20 cm , ramming, watering and disposal of surplus exacavated soil as driected, within a lead of 50 metres 126.00 cum 589.32 Rupees Five Hundred Eighty Nine and Thirty Two Paise Only 74254.58

29 Providing, laying and fixing 300mm dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 99.00 Metre 1027.25 Rupees One Thousand Twenty Seven and Twenty Five Paise Only 101698.17

30 Supplying and laying of 63mm dia (OD-63 mm & ID-51 mm nominal) DWC pipe SN6 ISI marked along with all accessories like socket, bend, couplers etc. confirming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc,. complete as required. 208.00 Metre 114.44 Rupees One Hundred Fourteen and Forty Four Paise Only 23803.66

31 Supply installation testing and commissioning of Astronomical timer switch of configuration {3output(1output per phase) and suitable for three phase supply} to be mounted in DB for automatic switching ON & OFF of street lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto modes) including required contacors with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 2.00 Each 9548.97 Rupees Nine Thousand Five Hundred Forty Eight and Ninety Seven Paise Only 19097.95

32 Supply , Installation, testing and commissioning of 1200mm sweep, BEE 5star ratd , ceiling fan with brush less direct current (BLDC) Motor, class of insulation: B, 3Nos blades, 30 cm long down rod, 2No.s canopies, shackle kit, safety rope, copper winding, Power factor not less than 0.9, Service value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, electronic regulator unti for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.) , insulation resistance more than 2 mega ohm, suitable for 230 V, 50Hz, single phase AC supply earthing etc. complete as required. 1.00 Each 2460.01 Rupees Two Thousand Four Hundred Sixty Only 2460.01

33 Supplying and laying 1.1KV LT Aluminium UG cable XLPE extruded inner sheathed, armoured UG LT cable as per IS-7098 (Part-1), Armouring strip thickness in average +5% and resistivity 14 Ohms/kms (Max) as per IS-3975. Rate should be inclusive of laying of LT Aluminium UG cable XLPE in existing cable tray.

33.1 4CX6Sqmm AL Ar XLPE Cable 89.00 Metre 146.61 Rupees One Hundred Forty Six and Sixty One Paise Only 13048.31

33.2 4CX10Sqmm AL Ar XLPE Cable 104.00 Metre 186.44 Rupees One Hundred Eighty Six and Forty Four Paise Only 19389.83

33.3 3.5CX25Sqmm AL Ar XLPE Cable 170.00 Metre 223.73 Rupees Two Hundred Twenty Three and Seventy Two Paise Only 38033.90

33.4 3.5CX185Sqmm AL Ar XLPE Cable 446.00 Metre 1093.22 Rupees One Thousand Ninety Three and Twenty Two Paise Only 487576.27

33.5 3.5CX300Sqmm AL Ar XLPE Cable 33.00 Metre 1695.76 Rupees One Thousand Six Hundred Ninety Five and Seventy Six Paise Only 55960.17

34 Supplying and laying of 1.1KV LT Copper UG cable XLPE extruded inner sheathed, armoured UG LT cable as per IS-7098 (Part-1), Armouring strip thickness in average +5% and resistivity 14 Ohms/kms (Max) as per IS-3975. Rate should be inclusive of laying of LT Copper UG cable XLPE in existing cable tray.

34.1 3CX2.5Sqmm CU Ar XLPE Cable 4322.00 Metre 183.05 Rupees One Hundred Eighty Three and Five Paise Only 791145.76

34.2 3CX4Sqmm CU Ar XLPE Cable 239.00 Metre 240.68 Rupees Two Hundred Forty and Sixty Seven Paise Only 57522.03

34.3 4CX4Sqmm CU Ar XLPE Cable 190.00 Metre 296.61 Rupees Two Hundred Ninety Six and Sixty One Paise Only 56355.93

34.4 4CX6Sqmm CU Ar XLPE Cable 838.00 Metre 402.54 Rupees Four Hundred Two and Fifty Four Paise Only 337330.51

34.5 4CX10Sqmm CU Ar XLPE Cable 1138.00 Metre 626.27 Rupees Six Hundred Twenty Six and Twenty Seven Paise Only 712696.61

34.6 4CX25Sqmm CU Ar XLPE Cable 61.00 Metre 1448.31 Rupees One Thousand Four Hundred Forty Eight and Thirty Paise Only 88346.61

35 Supplying and laying 1.1KV LT Aluminium UG cable XLPE extruded inner sheathed, armoured UG LT cable as per IS-7098 (Part-1), Armouring strip thickness in average +5% and resistivity 14 Ohms/kms (Max) as per IS-3975. Rate should be inclusive of Laying of LT Aluminium UG cable XLPE extruded inner sheathed, armoured UG LT cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as per CPWD specifications.

35.1 4CX6Sqmm AL Ar XLPE Cable 1039.50 Metre 454.24 Rupees Four Hundred Fifty Four and Twenty Three Paise Only 472179.66

35.2 4CX10Sqmm AL Ar XLPE Cable 121.55 Metre 494.07 Rupees Four Hundred Ninety Four and Six Paise Only 60053.94

35.3 3.5CX25Sqmm AL Ar XLPE Cable 239.80 Metre 531.36 Rupees Five Hundred Thirty One and Thirty Five Paise Only 127419.15

35.4 3.5CX300Sqmm AL Ar XLPE Cable 412.50 Metre 1955.93 Rupees One Thousand Nine Hundred Fifty Five and Ninety Three Paise Only 806822.03

36 Supplying and laying of 1.1KV LT Copper UG cable XLPE extruded inner sheathed, armoured UG LT cable as per IS-7098 (Part-1), Armouring strip thickness in average +5% and resistivity 14 Ohms/kms (Max) as per IS-3975. Rate should be inclusive of Laying of LT Copper UG cable XLPE extruded inner sheathed, armoured UG LT cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as per CPWD specifications.

36.1 3CX2.5Sqmm CU Ar XLPE Cable 239.80 Metre 490.68 Rupees Four Hundred Ninety and Sixty Seven Paise Only 117664.58

36.2 3CX4Sqmm CU Ar XLPE Cable 497.20 Metre 548.31 Rupees Five Hundred Forty Eight and Thirty Paise Only 272617.29

36.3 4CX4Sqmm CU Ar XLPE Cable 205.15 Metre 604.24 Rupees Six Hundred Four and Twenty Three Paise Only 123959.28

36.4 4CX6Sqmm CU Ar XLPE Cable 341.00 Metre 710.17 Rupees Seven Hundred Ten and Sixteen Paise Only 242167.80

36.5 4CX10Sqmm CU Ar XLPE Cable 521.40 Metre 933.90 Rupees Nine Hundred Thirty Three and Eighty Nine Paise Only 486934.58

37 Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required

37.1 Upto 3Cx2.5 Sq. mm 240.00 Each 170.00 Rupees One Hundred Seventy Only 40800.00

37.2 3CX4Sqmm CU Ar XLPE Cable 22.00 Each 190.00 Rupees One Hundred Ninety Only 4180.00

37.3 4CX4Sqmm CU Ar XLPE Cable 10.00 Each 230.00 Rupees Two Hundred Thirty Only 2300.00

37.4 4CX6Sqmm CU Ar XLPE Cable 36.00 Each 280.00 Rupees Two Hundred Eighty Only 10080.00

37.5 Upto 4Cx10 Sq. mm (25mm) 88.00 Each 360.00 Rupees Three Hundred Sixty Only 31680.00

37.6 Upto 4Cx25 Sq. mm (28mm) 4.00 Each 590.00 Rupees Five Hundred Ninety Only 2360.00

38 Supplying, installation, testing and commissioning of 6module 1 row SPN distribution board. The IP65 Weatherproof Cabinet should have Class: IP65 - IK09 - Class II Protection. 1.00 Each 2686.44 Rupees Two Thousand Six Hundred Eighty Six and Forty Four Paise Only 2686.44

39 Supplying and installation of metal fan box with shackle kit and all other accessories required to complete the installation. 64.00 Each 169.49 Rupees One Hundred Sixty Nine and Forty Nine Paise Only 10847.46

40 Supply, installation testing and commissioning of 150mm Sweep Size Exhaust Fan. The fan should have Automatic front shutter which protects against foreign objects, Light weight exhaust ideal for mounting on glass window or wall. Powerful 100% copper motor ensures robust performance. Corrosion protection with rust proof body and blades, For AC supply 50 Hz, 240 V and Air Delivery : 280CMM , Speed: 1350 rpm in the existing opening i/c making fixing arrangement and connection with 3 core 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. 12.00 Each 1950.85 Rupees One Thousand Nine Hundred Fifty and Eighty Four Paise Only 23410.17

41 Supplying, installation testing and commissioning of 450 mm sweep heavy duty Metal Body exhaust fan suitable for 1400 RPM to operate on 230 V single phase AC supply in the existing opening i/c making fixing arrangement and connection with 3 core 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. 5.00 Each 6927.97 Rupees Six Thousand Nine Hundred Twenty Seven and Ninety Six Paise Only 34639.83

42 Supply, installation testing and commissioning of 30 Inch industrial Air Circulator, the fan should have 3 metal blades which revolve at a rate of 1440 revolutions per minute. Fan should have power consumption of 250 watts and fan should get controlled by button. The rate shall include installing air circulator at 4m height from FFL. 1.00 Each 9821.19 Rupees Nine Thousand Eight Hundred Twenty One and Eighteen Paise Only 9821.19

43 Supply and fixing of 3Nos of I/o Socket along with 1No of quad face plate and 1No of 2Module GI box with crimping of existing cat 6 cable on computer and rack side. 134.00 Each 634.75 Rupees Six Hundred Thirty Four and Seventy Four Paise Only 85055.93

44 Supply, fixing of body earthing chemical pipe in pipe earthing electrode of outer dia 76mm of 1.6mm thickness and inner dia of 42mm of 2.6mm thickness ,The length of electrode should be 3meter with galvanised coating and coating should be 80-100 micron. The pipe should have 16mm dia bolts, nuts, washers and check nuts etc. The rate shall be inclusive of excavation, refilling, removing of surplus earth and construction of 450x450 chamber (OD) with plastering on all sides and providing precast cover suitable for 450x450 chamber . The earth pit shall be filled with 2Nos of 25kgs backfilled compound (having good enhancing material) as per standard practices and painting chamber top with black color background and labelling the earth pit and its earth pit resistance value should be done with white color, Testing of earth electrode by earth tester as per directions of Engineer incharge. 32.00 Each 11350.85 Rupees Eleven Thousand Three Hundred Fifty and Eighty Four Paise Only 363227.12

45 Supply, fixing of neutral earthig chemical pipe in pipe earthing electrode of outer dia 76mm of 1.6mm thickness and inner dia of 42mm of 2.6mm thickness ,The length of electrode should be 3meter with copper coating and coating should be 250micron, The pipe should have 16mm dia bolts, nuts, washers and check nuts etc. The rate shall be inclusive of excavation, refilling, removing of surplus earth and construction of 450x450 chamber (OD) with plastering on all sides and providing precast cover suitable for 450x450 chamber . The earth pit shall be filled with 1No of 25kgs backfilled compound (having good enhancing material) as per standard practices and painting chamber top with black color background and labelling the earth pit and its earth pit resistance value should be done with white color, Testing of earth electrode by earth tester as per directions of Engineer incharge. 2.00 Each 20600.00 Rupees Twenty Thousand Six Hundred Only 41200.00

46 Supply, fixing of lightning arrestor earthig chemical pipe in pipe earthing electrode of outer dia 38mm ,The length of electrode should be 3meter with copper plated coating and coating should be 250micron, The pipe should have 16mm dia bolts, nuts, washers and check nuts etc. The electrode should be provided with 250mm (L)x 50mm (H) x 6mm (thickness) copper busbar, the copper busbar should be provided with 4Nos of holes to connect the cables. The rate shall be inclusive of excavation, refilling, removing of surplus earth and construction of 450x450 chamber (OD) with plastering on all sides and providing precast cover suitable for 450x450 chamber . The earth pit shall be filled with 1No of 25kgs backfilled compound (having good enhancing material) as per standard practices and painting chamber top with black color background and labelling the earth pit and its earth pit resistance value should be done with white color, Testing of earth electrode by earth tester as per directions of Engineer incharge. 1.00 Each 14707.63 Rupees Fourteen Thousand Seven Hundred Seven and Sixty Two Paise Only 14707.63

47 Supply and installation of Early streamer Emission safe Lightning protection rod having level of protection I covering minimum 79meters radius coverage. The ESE lighting rod should have tested for withstanding 200KA. The ESE should be approved by CPRI/BHEL Supply and installation of Elevation pole made of Class 'B' GI- material having ISI-marking. Consists of the following (for a typical 4.5m mast): a) 4.5mtr x 80mm outer dia GI pipe and inner dia 48 with 3.2mm thick b) Base plate(800x800x10mm), mounting bracket, clamps and all required fixing accessories supplied in compliance with IEC 62561 - 1 c) Providing (850x850x 700mm) concrete pedestal 4Nos of J bolts of size M16X600LG and to be embedded in the concrete pedestal. The rate should be including 800x800x10mm thick base plate during the concrete. Supply and installation of Lightning Flash Counter. Electronically controlled, register every strike between 1000 A to 100 KA for a 8/20 microsecond peak current. Tested in High Voltage Laboratory (CPRI).Digital -2 etc as required. 1.00 Each 96627.12 Rupees Ninety Six Thousand Six Hundred Twenty Seven and Eleven Paise Only 96627.12

48 Supply and installation of test link with GI strip of 40x6mm of 277mm length and 3Nos insulators,waher & nut 1.00 Each 1872.03 Rupees One Thousand Eight Hundred Seventy Two and Three Paise Only 1872.03

49 Supply, Installation of Down conductor made of Copper cable. Minimum cross sectional area of 1cx 70 Sq. mm to withstand 250kA lightning current and comply with NFC/ IEC 62305 standard. Cable shall have 19-strands across the 70sqmm cross-section, each strand dia of min 2.1mm 75.00 Metre 1351.69 Rupees One Thousand Three Hundred Fifty One and Sixty Nine Paise Only 101377.12

50 Supply, installation, testing and commissioning of 3phase 40A FP MCB with IP56 4module enclosure box. 2.00 Each 3735.59 Rupees Three Thousand Seven Hundred Thirty Five and Fifty Nine Paise Only 7471.19

51 Supply, installation, testing and commissioning of 3phase 63A FP MCB with IP56 4module enclosure box. 2.00 Each 3735.59 Rupees Three Thousand Seven Hundred Thirty Five and Fifty Nine Paise Only 7471.19

52 Supply, installation, testing and commissioning of Three phase 40A industrial socket with plug top controlled by 40A FP MCB with enclosure box 4.00 Each 5994.92 Rupees Five Thousand Nine Hundred Ninety Four and Ninety One Paise Only 23979.66

53 Supply, installation, testing and commissioning of 3phase 40A FP MCB with IP65 6module enclosure box. 3.00 Each 4374.58 Rupees Four Thousand Three Hundred Seventy Four and Fifty Seven Paise Only 13123.73

54 Supply, installation, testing and commissioning of 3phase 63A FP MCB with IP65 6module enclosure box. 18.00 Each 4374.58 Rupees Four Thousand Three Hundred Seventy Four and Fifty Seven Paise Only 78742.37

55 Supply, installation, testing and commissioning of Single phase 32A industrial socket with plug top controlled by 40A DP MCB with enclosure box 2.00 Each 2928.81 Rupees Two Thousand Nine Hundred Twenty Eight and Eighty One Paise Only 5857.63

56 Supply installation testing and commissioning of LED1 surface/ suspended mounted IP20 LED integrated batten with 40-watt input wattage. The luminaire’s housing material should be Extruded Aluminium with white powder coating. It should have an in-built surge of 4KV, THD<10 and PF >0.95. The system efficacy should be greater than or equal to 120 lumens per watt. The luminaire length should not be greater than 1207 mm with minimum width of 43mm. The rate should include installing the fixture at 4m height from FFL and PVC holder type. 226.00 Each 2055.93 Rupees Two Thousand Fifty Five and Ninety Three Paise Only 464640.68

57 Supply installation testing and commissioning of LED2 of recess mounted 2ftx2ft LED luminaire of 36W, housing made from CRCA sheet metal body powder coated in white & special high translucent frosted diffuser is used for uniform glare-free light distribution diffuser with IP-20 degree of protection. System efficacy of >110 Lumen/Watt, CRI ≥80 and co-related color temperature (CCT) of 5700K (±500K). The luminaire should have 4KV surge protection integrated in driver , PF≥0.95, and total harmonic distortion of THD≤10% operating voltage range of 140V-270V should be provided. The Driver used must be a constant current driver with efficiency of ≥85% & electrical Class 1. Manufacturers should have inhouse testing facilities approved by NABL/Govt. of India approved LAB to provide LM79 report. LED makes approved: CREE /OSRAM / LUMILEDs/Seoul/ Nichia only. The rate should include installing the fixture at 4m height from FFL. 46.00 Each 1720.34 Rupees One Thousand Seven Hundred Twenty and Thirty Three Paise Only 79135.59

58 Supply installation testing and commissioning of LED3 of Surface/Suspended LED luminaire of 10W, housing made from Aluminium extruded, white powder coated & Polycarbonate diffuser with IP-20 degree of protection. System efficacy of >100 Lumen/Watt, CRI ≥80 and co-related color temperature (CCT) of 5700K (±500K). The luminaire should have 2.5KV surge protection integrated in driver , PF≥0.95, and total harmonic distortion of THD≤20% operating voltage range of 140V-270V should be provided. The Driver used must be a constant current driver with efficiency of ≥85% & electrical Class 1. LED designed for 25,000 burning hours. Manufacturers should have inhouse testing facilities approved by NABL/Govt. of India approved LAB to provide LM79 report The rate should include installing the fixture at 2.5m height from FFL. 24.00 Each 372.88 Rupees Three Hundred Seventy Two and Eighty Eight Paise Only 8949.15

59 Supply installation testing and commissioning of LED4 flood light luminaire of 120W, housing made from high pressure die cast aluminum, Toughened glass cover with IP-66 degree of protection. System efficacy of >110 Lumen/Watt CRI ≥70 and co-related color temperature (CCT) of 5700K (ANSI). The luminaire should have 4KV surge protection integrated in driver and 10KV SPD external to driver for enhanced safety, PF≥0.95, and total harmonic distortion of THD≤10%, operating voltage range of 120V-270V should be provided. The Driver used must be a constant current potted driver with efficiency of ≥85% & electrical Class 1. Brand Embossing for Traceability Till Life. LM79From NABL Approved Lab, LM80 From the Source Manufacturer for > =9000 Hrs, Luminaire like at 50K Burning Hours. LED makes approved. The rate should include installing the fixture at 6m height from FFL and PVC holder tape. 4.00 Each 6338.98 Rupees Six Thousand Three Hundred Thirty Eight and Ninety Eight Paise Only 25355.93

60 Supply installation testing and commissioning of LED5 round highbay luminaire of 75W, housing made from high pressure die cast aluminum & toughened glass with IP-66 degree of protection. System efficacy of >125 Lumen/Watt, CRI ≥70 and co-related color temperature (CCT) of 5700K (±500K). The luminaire should have 4KV surge protection integrated in driver with 10KV external surge, PF≥0.95, and total harmonic distortion of THD≤10% operating voltage range of 120V-270V should be provided. The Driver used must be a constant current driver with efficiency of ≥85% & electrical Class 1. Manufacturers should have inhouse testing facilities approved by NABL/Govt. of India approved LAB to provide LM79 report. LED makes approved: CREE /OSRAM / LUMILEDs / Nichia only. The rate should include necessary shackle kit to fit fixture at 6m height from FFL and PVC holder tape. 16.00 Each 7522.88 Rupees Seven Thousand Five Hundred Twenty Two and Eighty Eight Paise Only 120366.10

61 Supply installation testing and commissioning of of LED6 round highbay luminaire of 150W, housing made from high pressure die cast aluminum ADC12 & toughened glass with IP-66 degree of protection. System efficacy of >140 Lumen/Watt, CRI ≥70 and co-related color temperature (CCT) of 5700K (±500K). The luminaire should have 4KV surge protection integrated in driver with 10KV external surge, PF≥0.95, and total harmonic distortion of THD≤10% operating voltage range of 120V-270V should be provided. The Driver used must be a constant current driver with efficiency of ≥85% & electrical Class 1. Manufacturers should have inhouse testing facilities approved by NABL/Govt. of India approved LAB to provide LM79 report.The rate should include installing the fixture at 13.5m height from FFL with required size of U clamp. 47.00 Each 9875.42 Rupees Nine Thousand Eight Hundred Seventy Five and Forty Two Paise Only 464144.92

62 Supply installation testing and commissioning of LED7 10W IP65 polycarbonate bulkhead.The rate should include installing the fixture at 4m height from FFL and PVC holder tape. 2.00 Each 678.81 Rupees Six Hundred Seventy Eight and Eighty One Paise Only 1357.63

63 Supply installation testing and commissioning of LED8 Street light luminaire of 120W, housing made from high pressure die cast aluminum, Integrated lens cover with IP-66 degree of protection. System efficacy of >110 Lumen/Watt CRI ≥70 and co-related color temperature (CCT) of 5700K (ANSI). The luminaire should have internal 4KV surge protection integrated with driver & 10kv external Surge protection, PF≥0.95, and total harmonic distortion of THD≤10%, operating voltage range of 120V-270V should be provided. The Driver used must be a constant current potted driver with efficiency of ≥85% & electrical Class 1. Brand Embossing for Traceability Till Life. LM79 report from OEM only. LM80 From the Source Manufacturer for > =9000 Hrs, Luminaire like at 50K Burning Hours. The rate should include installing the fixture at 9 m height for pole. 41.00 Each 5628.81 Rupees Five Thousand Six Hundred Twenty Eight and Eighty One Paise Only 230781.36

64 Supply installation testing and commissioning of LED9 Street light luminaire of 45W, housing made from high pressure die cast aluminum, Integrated lens cover with IP-66 degree of protection. System efficacy of >110 Lumen/Watt CRI ≥70 and co-related color temperature (CCT) of 5700K (ANSI). The luminaire should have internal 4KV surge protection integrated with driver & 10kv external Surge protection, PF≥0.95, and total harmonic distortion of THD≤10%, operating voltage range of 120V-270V should be provided. The Driver used must be a constant current potted driver with efficiency of ≥85% & electrical Class 1. Brand Embossing for Traceability Till Life. LM79 report from NABL approved Lab only. LM80 From the Source Manufacturer for > =9000 Hrs, Luminaire like at 50K Burning Hours. The rate should include installing the fixture at 6 m height for pole. 29.00 Each 3042.37 Rupees Three Thousand Forty Two and Thirty Seven Paise Only 88228.81

65 Supply installation testing and commissioning of LED10 10w aviation light with 6module 1 row SPN distribution board and 3runs of 2.5 Sq.mm wire of 6.5mtrs. The IP65 Weatherproof Cabinet should have Class: IP65 - IK09 - Class II Protection. 1.00 Each 8446.61 Rupees Eight Thousand Four Hundred Forty Six and Sixty One Paise Only 8446.61

Supply, Installation, Testing & commiissioning of following Indoor LT Panels

Design, fabrication, supply, installation, testing and commissioning of cubicle type Indoor LT Panel suitable to be mounted on the existing brick pedestal/cable duct using M.S channel (to be included) frame work, with cable entry from bottom/top with removable gland plates with required knock-outs, panel fabricated out of CRCA sheet steel folded and braced as necessary to provide a rigid support for all components, totally enclosed, dust and vermin proof and degree of protection shall not be less than IP-54, multi-tier cubicle type formation with front hinged lockable doors for the individual feeders/compartments, preparation of surface and treatment by seven tank process, powder coated with approved colour for not less than 50 microns and all doors and covers shall be fully gasketed using good quality EPDM gasket and/or rubber strips and ensure good lockable, durable door opening & closing mechanism, suitable meshed ventilator louvers with suitable cover,canopy type covering and Aluminium bus bars for three phases and neutral, bus bar insulators, heat shrinkable PVC sleeves etc., with necessary interconnections as specified in Technical specifications for electrical & mechanical works, comprising of following switchgear and accessories complete in all respects and as directed by Engineer-in-charge.

Note:-1) Current density shall not exceed 1.2 A/sq.mm for Copper bus bars in LT Panel

2)All MCCBs in the LT panels shall be adjustable with thermal settings(80% to 100%), overload and short circuit releases including door interlocking device, front operating handle complete,ON and OFF indication of LED module etc. complete in all respects.

3)The operating height of the Panel shall not exceed 2.1 mtr. from FFL.

66 Main MCW LT Panel 1.00 Set 443996.00 Rupees Four Lakh Forty Three Thousand Nine Hundred Ninety Six Only 443996.00

1No- 800 A, 415V gr. 36KA 4P Microprocessor based MCCB.

Lot - 800 A TP N, 415V, short circuit rated 36KA for 1sec, Copper bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

1Nos- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

1 Set-800/5A current transformers of suitable class and VA burden for metering.

1no-(0-500V) range digital type Voltmeter with a push button option for selecting the phases.

1No 32 A 415V gr TP 36KA MPCB of for tapping power for metering and control circuit

1Set - RYB indicating lamps of LED module with 6A, 230V,10KA, SP MCB.

1Set- 6A, 230V, 10KA SP MCB for the protection of measuring instruments.

(1-8A) ELR with CBCT

Line Voltage Monitor

Type 2, Class- B, 40KA, SPD

3 Nos - 250A, 415V gr. 36KA, TPN MCCB Microprocessor based

5 NoS - 100A, 415V gr. 36KA, TPN MCCB Thermal Magnetic based

13Nos - 63A, 415V gr. 10KA breaking capacity, 4P MCB

9 Nos - 40 A, 415V gr. 10KA breaking capacity, 4P MCB

1Nos of 40A 2P MCB 10KA 'C' Curve

2Nos of 25A 4P MCB 10KA 'C' Curve

67 Supply, Installation, Testing & commiissioning of SUB PANEL 1.00 Set 214908.00 Rupees Two Lakh Fourteen Thousand Nine Hundred Eight Only 214908.00

1No - 250 A, 415V gr. 25KA, 4P Microprocessor based MCCB

Lot - 250 A TPN, 415V, short circuit rated 36KA for 1sec, Copper bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

1No- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

1Set of - 250/5A current transformers of class 1 and 15VA burden for metering.

1No- (0-500V) range 96x96mm flush type voltmeter with RYB selector switch

1No 16A 415V gr TP 50KA MPCB of for tapping power for metering and control circuit

1Set - RYB indicating lamps of LED module with 6A SP MCB.

1Set- 6A, MCB for the protection of measuring instruments.

1No - 100A, 415V gr. 25 KA breaking capacity, TPN MCCB with Thermomagnetic release.

10 Nos - 63A, 415V gr. 10KA breaking capacity, 4P MCB

5 Nos - 40A, 415V gr. 10KA breaking capacity, 4P MCB

2 Nos - 40A, 2P MCB 10 KA C Curve

2 Nos - 25A, 2P MCB 10 KA C Curve

(1-8A) ELR with CBCT

68 Supply, Installation, Testing & commiissioning of UPS OUTPUT PANEL 1.00 Set 58493.00 Rupees Fifty Eight Thousand Four Hundred Ninety Three Only 58493.00

1No - 100 A, 415V gr. 25KA, 4P Microprocessor based MCCB

Lot - 100 A TPN, 415V, short circuit rated 36KA for 1sec, Copper bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

1Set of - 100/5A current transformers of class 1 and 15VA burden for metering.

1No of Digital VAF Cl-1 96Sqmm,

1No 16A 415V gr TP 50KA MPCB of for tapping power for metering and control circuit

1Set - RYB indicating lamps of LED module with 6A SP MCB.

1Set- 6A, MCB for the protection of measuring instruments.

4 Nos - 40A, 4P MCB 10 KA C Curve

4 Nos - 25A, 2P MCB 10 KA C Curve

Supply, Installation, testing & commissioning of UPS Output Panel

69 Supply, Installation, Testing & commiissioning of AC PANEL 2.00 Set 210434.19 Rupees Two Lakh Ten Thousand Four Hundred Thirty Four and Eighteen Paise Only 420868.37

1No - 250 A, 415V gr. 25KA, 4P Microprocessor based MCCB

Lot - 250 A TPN, 415V, short circuit rated 36KA for 1sec, Copper bus bars with busbar insulators, heat shrinkable PVC sleeves etc.

1No- Multi function meter (MFM/MDM) suitable for 3ph, 4 wire, 240V(L-N), 5A, CL-1, RS 485 Port Digital MFM/MDM of EM6400NG of Schneider or any equivalent make meeting technical specification of above MFM complete in all respect.

1Set of - 250/5A current transformers of class 1 and 15VA burden for metering.

1No- (0-500V) range 96x96mm flush type voltmeter with RYB selector switch

1No 16A 415V gr TP 50KA MPCB of for tapping power for metering and control circuit

1Set - RYB indicating lamps of LED module with 6A SP MCB.

1Set- 6A, MCB for the protection of measuring instruments.

(1-8A) ELR with CBCT

11Nos of 63A 4P RCBO 100ma

2Nos of 63A 4P MCB 10KA 'C' Curve

70 Supply,installation,testing and commissioning of following online double conversion 6KVA UPS system (1ph in and 1ph out) with 1phase, 230V, 50HZ, 3 wire input and 1phase ,415V , 50Hz output system with built in static switch IGBT version online UPS with battery backup.The UPS should be with standard fittings, accessories, protection, equipments, indications and controls including but not restricted to transformer, rectifier, inverter,static bypass switch,maintenance By-pass ,inter-connections etc. including warranty as detailed in technical specifications .The quoted price shall include suitable cables from battery to UPS. The UPS should be BMS compatible by providing Rs485port or RS232 cable. 3.00 Nos 75548.31 Rupees Seventy Five Thousand Five Hundred Forty Eight and Thirty One Paise Only 226644.93

71 Supply, installation, testing and commissioning of 12V/26AH Sealed Maintenance Free Batteries including suitable capacity interconnecting cables/wires between batteries. 48.00 Nos 3058.47 Rupees Three Thousand Fifty Eight and Forty Seven Paise Only 146806.78

72 Supply, installation, testing and commissioning of 12V/26AH Sealed Maintenance Free Batteries including suitable capacity interconnecting cables/wires between batteries 3.00 Nos 16665.25 Rupees Sixteen Thousand Six Hundred Sixty Five and Twenty Five Paise Only 49995.76

73 Supply,installation,testing and commissioning of following online double conversion 40KVA UPS system (3ph in and 3ph out) with 3phase, 415V, 50HZ, 4 wire input and 3phase ,415V , 50Hz output system with built in static switch IGBT version online UPS with battery backup.The UPS should be with standard fittings, accessories, protection, equipments, indications and controls including but not restricted to transformer, rectifier, inverter, static bypass switch,maintenance By-pass ,inter-connections etc. as detailed in technical specifications including warranty .The quoted price shall include suitable cables from battery to UPS. The UPS should be BMS compatible by providing Rs485port or RS232 cable. 1.00 Each 322189.83 Rupees Three Lakh Twenty Two Thousand One Hundred Eighty Nine and Eighty Three Paise Only 322189.83

74 Supply, installation, testing and commissioning of 12V/26AH Sealed Maintenance Free Batteries including suitable capacity interconnecting cables/wires between batteries. 40.00 Each 6477.97 Rupees Six Thousand Four Hundred Seventy Seven and Ninety Six Paise Only 259118.64

75 Supply and installation of open type M.S.Battery rack, battery interlink set and battery breaker box 1.00 Each 44439.83 Rupees Forty Four Thousand Four Hundred Thirty Nine and Eighty Three Paise Only 44439.83

76 Supply and installation of 3mm thick 9meter height hot dip Galvanized octagonal pole having bottom 155mm dia, top 70mm dia . The pole material should be confirming to BSEN 10025, The pole should be provided with inbuilt junction box consisting of connectors, 1no. of 6 amps SP MCB and terminals etc, complete. The pole should be provided with 250x250x16mm thick base plate with 4Nos of slots 28x42 for j bolts from the concrete. The rate should be inclusive of 4Nos of J bolts of size M24X750LG and to be embedded in the concrete pedestal. The rate should be including 250x250x16mm thick base plate during the concrete. The rate should include excavation of (1000x1000x1200mm) concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling ans secured with huge holding clamps, bolts, nuts etc. as required. 22.00 Each 27750.00 Rupees Twenty Seven Thousand Seven Hundred Fifty Only 610500.00

77 Supply and installation of 3mm thick 6meter height hot dip Galvanized octagonal pole having bottom 130mm dia, top 70mm dia . The pole material should be confirming to BSEN 10025, The pole should be provided with inbuilt junction box consisting of connectors, 1no. of 6 amps SP MCB and terminals etc, complete. The pole should be provided with 200x200x12mm thick base plate with 4Nos of slots 24x40 for j bolts from the concrete. The rate should be inclusive of 4Nos of J bolts of size M20X600LG and to be embedded in the concrete pedestal. The rate should be including 200x200x12mm thick base plate during the concrete. The rate should include excavation of (1000x1000x1200mm) concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling ans secured with huge holding clamps, bolts, nuts etc. as required. 29.00 Each 22806.78 Rupees Twenty Two Thousand Eight Hundred Six and Seventy Seven Paise Only 661396.61

78 Supply installation of double arm bracket with 1m length 50mm dia with suitable pole top, the pole top should be fixed by M10 nuts. 19.00 Each 4566.10 Rupees Four Thousand Five Hundred Sixty Six and Ten Paise Only 86755.93

79 Supply installation of single arm bracket with 1m length 50mm dia with suitable pole top, the pole top should be fixed by M10 nuts. 32.00 Each 2867.80 Rupees Two Thousand Eight Hundred Sixty Seven and Seventy Nine Paise Only 91769.49

80 Supply & Installation of MS Flat supports/ L angels/ for LED lights and other electrical stuffs fixed on wall/ roof . The MS flat supports should be provided with 2 coats of red oxide primer and 2 coats of paint of approved colour and with all necessary accessories as per site. The MS flat supports should be fixed to wall by 10mm anchor fasteners. 378.00 Kgs 83.05 Rupees Eighty Three and Five Paise Only 31393.22

81 Supplying PVC flexible conduit pipe 25mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an intervals of 300mm using NF screws and on either end of the pipe terminated completely 220.00 Metre 22.03 Rupees Twenty Two and Three Paise Only 4847.46

82 Supplying and laying synthetic Rubber insulated mats 6 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m. 13.00 Each 3333.05 Rupees Three Thousand Three Hundred Thirty Three and Five Paise Only 43329.66

83 Supply and Installation of 2nos.in each set dully filled with fine sand fire buckets curved bottom with MS floor stand as per requirement of local authorities.The Fire buckets shall be painted red from outside and white from inside with suitable accessories complete as required(as per EB std). 9.00 Each 3000.00 Rupees Three Thousand Only 27000.00

84 Supply and Installation of Shock treatment chart with teak wood frame and glass covered as approved by Electrical Inspectorate and suitable for wall mounting. 6.00 Each 1477.97 Rupees One Thousand Four Hundred Seventy Seven and Ninety Six Paise Only 8867.80

85 Supply and fixing of First Aid Box 6.00 Each 898.31 Rupees Eight Hundred Ninety Eight and Thirty Paise Only 5389.83

86 Supply and installation of 5Kg ceiling mounted fire extinguisher clean agent HCFC 123 Stored Pressure Type, Pressure Gouge,Gross Weight 7.7kg. empty weight 2.7 kg Can Height 267MM, Diameter230 MM, Discharge Time less than 8Secs,Auto discharge mechanism, on temperature rise, applicable on Class A, B,C and electrically started Fire, Can Construction; Deep drawn & CO, Mig welded, Valve Construction: Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness: 1.60MM, 5 Years Warranty. including cost of materials, labour, usage charges of machinery complete as per specifications. IS 15683 and CE Approved 5.00 Each 27137.29 Rupees Twenty Seven Thousand One Hundred Thirty Seven and Twenty Eight Paise Only 135686.44

87 Supply and installation of 4Kg fire extinguisher mono ammonium phosphate powder 50, stored pressure type, pressure guage, gross weight 6.9 Kg, empty weight 2.9 Kg, Can height 440mm, diameter 140mm, discharge time less than 13 secs, controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4meters, applicable on Class A , B , C and electrically started fire, A Rating 2A, 8 Rating 218, can construction: Deep drawn & co., Mig welded, valve construction: forging and mechining, Internal coating of can: Epoxy powder coating, External coating of can: Epoxy polyster power costing, sheet metal thickness : 1.60mm, 5years warranty with installation system with superior quality EPDM rubber hosepipe etc., incluing cost of supporting materials like MS stand & accessories if it is fixing on floor/MS brackets and accessories if it is fixing on wall, labour, usgae charges of machinery complete. 23.00 Each 3248.31 Rupees Three Thousand Two Hundred Forty Eight and Thirty Paise Only 74711.02

88 Supply, installation in position, testing and commissioning of 4.5Kg Squeeze grip C02 Gas Type Fire Extinugisher, Trolley Mounted, 2 Easy Weight Management used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg. empty Weight 14.6Kg. Can Height 860MM Diameter 140MM, Discharge Time less than13 Sees, Controllable discharge mechanism, Applicable on Class B &C Fire, 8 Rating 138, Can Constuctin : Hot spinning/Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness : 4.5M M lSI Approved 1Year Warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. 5.00 Each 9963.56 Rupees Nine Thousand Nine Hundred Sixty Three and Fifty Five Paise Only 49817.80

89 Supply and fixing of 200x50mm PVC Raceway with cover and other accessories like bends, end caps and other accessories, The PVC Raceway should be fixed to wall with couch screws. 128.00 Metre 2666.10 Rupees Two Thousand Six Hundred Sixty Six and Ten Paise Only 341261.02

90 Supply and fixing of 4way Connector box for high bay lights, The connector box should be fixed to lattice on the hangar. 47.00 Each 388.98 Rupees Three Hundred Eighty Eight and Ninety Eight Paise Only 18282.20

91 Supply, fabricating and installing of Following size perforated GI cable trays with cover including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling/fixing to the wall/RCC beam/iron structures including M.S. angle supports and fixing hardware etc., complete in all respects as directed by Engineer in charge.

91.1 Supply & fixing of 150 x 50 x 2mm thick with 1.6mm thick cover trays 171.00 Metre 680.00 Rupees Six Hundred Eighty Only 116280.00

91.2 Supply & fixing of 300 x 50 x 2mm thick with 1.6mm thick cover trays 186.00 Metre 1115.00 Rupees One Thousand One Hundred Fifteen Only 207390.00

91.3 Supply & fixing of 600 x 50 x 2mm thick with 1.6mm thick cover trays 440.00 Metre 1995.00 Rupees One Thousand Nine Hundred Ninety Five Only 877800.00

92 Supply, fabricating and installing of Following size perforated GI cable trays without cover including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling/fixing to the wall/RCC beam/iron structures including M.S. angle supports and fixing hardware etc., complete in all respects as directed by Engineer in charge.

92.1 Supply & fixing of 150 x 50 x 2mm thick trays 56.00 Metre 580.00 Rupees Five Hundred Eighty Only 32480.00

92.2 Supply & fixing of 300 x 50 x 2mm thick trays 13.00 Metre 855.00 Rupees Eight Hundred Fifty Five Only 11115.00

92.3 Supply & fixing of 600 x 50 x 2mm thick trays 10.00 Metre 1415.00 Rupees One Thousand Four Hundred Fifteen Only 14150.00

CCTV & IT Works

93 Supply,Installation,Testing and Commissioning of 32 Channel Core+ AI 32-Channel NVR with Embedded PoE having minimum 4Nos SATA supporting 8TB. The video output should be HDMIx1, VGAx1 and display resolution to be 3840x2160, 1920x1080, 1280x720. The NVR should be able to take upon PTZ, Fish eye, Bullet and Dome cameras and NVR should support MJPEG, H.264, H.265 video format include HDD slots. NVR should have hot swap technology, should support 32TB HDDs and should have multiple no. of USB2.0 & USB3.0 ports.The NVR shoul have Motion Detection, Smart VCA Event, Cyber Attack, PIR Detection, Tampering Detection,Camera DI/DO, Camera Disconnected, Disk Failure, Disk Full, NVR DI/DO, PoE error,Video loss Rate quoted should be inclusive of all accessories for installation and commissionig and should be complete. The cost shall include VSS tool installation, configuration and license required should be considered.Approved Makes:- Honeywell/ Bosch/ Hanwa/ Methodex/ Sony/ Panasonic/Vivotek 1.00 Each 134900.00 Rupees One Lakh Thirty Four Thousand Nine Hundred Only 134900.00

94 Supply, Installation, Testing and Commssioining of 5mp 30fps , Smart Stream III , SNV , WDR Pro, Smart IR II , Smart VCA, fixed network camera, Remote Focus bullet Camera. The camera should have features given below a) 30 fps @ 2560x1920, 60 fps @ 1920x1080 b) H.265 Compression Technology c) Smart Stream III to Optimize Bandwidth Efficiency d) SNV (Supreme Night Visibility) for Low Light Conditions e) W DR Pro to Provide Extreme Visibility in Extremely Bright or Dark Environments f) Vandal-proof IK10-rated Housing. The cameras should be provided with weather proofIP67 rated vandal prooof IK10 standards, the camera enclosures are constructed from castaluminium. The camera enclosure should be provided with built in IR LED's , window demister heater and fan. The enclosure to be powered by 24AC/24VDC Make: IP9181-H Vivotek Make or equivelent. Approved Makes:- Honeywell/ Bosch/ Hanwa/ Methodex/ Sony/ Panasonic/Vivotek 9.00 Each 15900.00 Rupees Fifteen Thousand Nine Hundred Only 143100.00

95 Supply, Installation, testing & commissioning of 42" 4k TFT LED Color, SMART Monitor with wall bracket for mounting all other accessories. The monitor should have 2HDMI ports, 2USB ports and should be Wifi enabled. Rate quoted should inclusive of all accessories for installtion and commissioing. Make:- LG / Sony / Samsung / Panasonic 1.00 Each 40590.00 Rupees Forty Thousand Five Hundred Ninety Only 40590.00

96 Supply,Installation,Testing and Commissioning of 8TB HDD inclusive of all accessories for installtion and commissionig and should be complete. Make: Seagate/Dell/Or equivalent 4.00 Each 17900.00 Rupees Seventeen Thousand Nine Hundred Only 71600.00

97 Supply, Installation,Testing and Commissioning of 24Port Gigabit Ethernet PoE+ Managed L2 Switch with 2 SFP ports: i) Minimum 24 RJ-45 autosensing 10/100/1000Mbps POE+ Ports ii) 2 x 1G (Min) SFP ports iii) Min 20 Gbps of switching capacity iv) Min 14 Mpps Switching throughput v) Console Ports : RJ45 Ethernet vi) Form Factor : rack-mountable vii) IPv4 & IPv6 support :Yes viii) PoE Budget : 195W (Minimum) ix) The offered switches should not be declared end of life/sale (EOL/EOS) x) Full-featured Web Management Console x) Security feature : VLAN , ACL , MAC Port security xi) Approved Make: Cisco / HP Aruba / Juniper/ Dlink/ Netgear Complete in all respects as directed by Engineer-in-charge. 1.00 Each 66900.00 Rupees Sixty Six Thousand Nine Hundred Only 66900.00

98 Supply,Installation,Testing and Commissioning of 24 Port Jack Panel including termination of OFC with all accessories.Rate quoted should inclusive of all accessories for installtion and commissionig and should be complete. Approved Make:COMMSCOPE TYCO/ PANDUIT/ MOLEX 1.00 Each 17900.00 Rupees Seventeen Thousand Nine Hundred Only 17900.00

99 Supply and fixing of wall Mountable 9U Network Rack with Power Distribution unit and cooling Fan, earthing cable etc. with all standard Accessories, complete in all respects as per technical specification and as directed by Engineer-in-charge . Approved Make:APC/VALRACK/NETRACK/RITTAL 3.00 Each 8200.00 Rupees Eight Thousand Two Hundred Only 24600.00

100 Supply,Installation,Testing and Commissioning of 1.5 meter Cat6 patch cord Approved Make:COMMSCOPE TYCO/ PANDUIT/ MOLEX 30.00 Each 196.00 Rupees One Hundred Ninety Six Only 5880.00

101 Supply and fixing of 1Nos of I/o Socket along with 1No of single face plate and 1No if 2Module GI box with crimping of existing cat 6 cable on computer and rack side. 9.00 Each 327.12 Rupees Three Hundred Twenty Seven and Eleven Paise Only 2944.07

102 Supply, installation, testing and commissioning approved make 9U rack assembly. 0.00 Each 8200.00 Rupees Eight Thousand Two Hundred Only 0.00

FIRE ALARM SYSTEM 0.00

103 Supplying, installation, testing and commissioning of fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate suitable for operation with amplifier i/c line matching transfromer etc. complete as required. 4.00 Each 501.92 Rupees Five Hundred One and Ninety One Paise Only 2007.66

104 Supplying, installation, testing and commissioning of talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S. (16 SWG)/ ABS box with break glass in front etc. complete as required. 1.00 Each 815.50 Rupees Eight Hundred Fifteen and Fifty Paise Only 815.50

105 Supplying, installation, testing and commissioning of sector panel suiatble for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS :2189 with mimic diagram for all area/zone covered, complete with all connections, intercoennections as required.

105.1 4Zone 1.00 Each 7989.17 Rupees Seven Thousand Nine Hundred Eighty Nine and Sixteen Paise Only 7989.17

106 Supplying, installation, testing and commissioning of micro processor based intelligent main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 Km, network communication card, minimum 320 character graphics /LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 V, 50Hz), 48 Hrs back up with 24 volt selaed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to prinour log and facility to have seamless integration with analog/digital voice evacuation system (Which is part of the schedule of work under SH: PA system) and shall be complete with all accessories. The panel shall be compatible for IBMS system with open protocol BACNET/ Modbus over IP complete.Scope also Includes supply, installation and connectivity of Auto dialer with addressable control module main control panel with minimum 10 telephone nos. connectivity

106.1 Two Loop Panel 1.00 Each 215566.05 Rupees Two Lakh Fifteen Thousand Five Hundred Sixty Six and Five Paise Only 215566.05

107 Supplying, installation, testing commissioning of repeater panel with 320 character/ touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required including suitable power supply module 1.00 Each 97938.94 Rupees Ninety Seven Thousand Nine Hundred Thirty Eight and Ninety Four Paise Only 97938.94

108 Supplying, installation, testing commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 100.00 Each 2575.35 Rupees Two Thousand Five Hundred Seventy Five and Thirty Four Paise Only 257534.75

109 Supplying, installation, testing commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. 10.00 Each 248.70 Rupees Two Hundred Forty Eight and Seventy Paise Only 2487.03

110 Supplying, installation, testing commissioning of fault isolator complete with base as required. 4.00 Each 2946.60 Rupees Two Thousand Nine Hundred Forty Six and Sixty Paise Only 11786.41

111 Supplying, installation, testing commissioning of addressable fire control module complete as required. 4.00 Each 2706.01 Rupees Two Thousand Seven Hundred Six Only 10824.03

112 Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) of suitable range required for the dome/simulator are complete with emitter and receiver including connections with remote test features etc., complete as required. 4.00 Each 67525.86 Rupees Sixty Seven Thousand Five Hundred Twenty Five and Eighty Five Paise Only 270103.42

113 Supplying, installation, testing commissioning of intelligent addressable duct detector including suiatble phot detector complete with base as required. 8.00 Each 7041.21 Rupees Seven Thousand Forty One and Twenty One Paise Only 56329.69

114 Supplying, installation, testing commissioning of addressable manual call point complete as required. 4.00 Each 3488.16 Rupees Three Thousand Four Hundred Eighty Eight and Sixteen Paise Only 13952.64

115 Supplying, installation, testing commissioning of addressable horn cum strobe complete as required. 4.00 Each 3159.26 Rupees Three Thousand One Hundred Fifty Nine and Twenty Six Paise Only 12637.05

116 Supplying, installation, testing commissioning of 6Zone, voice alarm contoller with USB, MP3 player (including 6 Zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required. 1.00 Each 113909.17 Rupees One Lakh Thirteen Thousand Nine Hundred Nine and Sixteen Paise Only 113909.17

117 Supplying, installation, testing commissioning of 6W metal box ceiling/wall speakers complete as required 4.00 Each 1615.68 Rupees One Thousand Six Hundred Fifteen and Sixty Seven Paise Only 6462.71

118 Supplying, installation, testing commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC supply complete as required. 1.00 Each 131374.32 Rupees One Lakh Thirty One Thousand Three Hundred Seventy Four and Thirty Two Paise Only 131374.32

119 Supplying, installation, testing commissioning of Voice command keypad 6 Zone, with microphone assembly complete as required. 1.00 Each 73670.47 Rupees Seventy Three Thousand Six Hundred Seventy and Forty Six Paise Only 73670.47

120 Supplying & laying of 2X1.5 Sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. 2000.00 Metre 155.89 Rupees One Hundred Fifty Five and Eighty Eight Paise Only 311779.66

121 Supplying and drawing of cable fire retardant PVC insulated copper conductor cable in the existing surface/ reccessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.

speaker cable Two pair, 2-core, 1.5 Sqmm 2800.00 Metre 80.19 Rupees Eighty and Nineteen Paise Only 224545.76

Sec - 'II' - Electrical Works Rupees One Crore Ninety Five Lakh Four Thousand Eight and Fifty Seven Paise Only 19504008.57

SEC - 'III' -AIR CONDITIONING WORKS

122 Supply, installation, testing and commissioning of 22HP unit with 2Nos compressor for Modular type VRV/VRF outdoor unit (Cooling & Heating only) equipped with highly efficient heremetically sealed scroll type inverter based compressor. Cost shall include pressure testing, vacuumizing, gas charging ( R-410A or as per manufacturer specification) and outdoor stand with antivibrating Polycarbonate support. The ODU unit to be BMS compatible. Rate shall be inclusive of Stickering on ODU. The unit should work in ambient temperature cooling mode (10 deg c to 56 deg c) and heating mode (-10 deg c to 24 deg c). The unit shalll be suitable to work on 3phase AC power supply (380-415v 50Hz). The EER of the 22HP machine should be minimum 3.30@100% load. The ODU cooling capacity and piping conections should be as per data sheets given by manufacturer. 1.00 Each 518500.00 Rupees Five Lakh Eighteen Thousand Five Hundred Only 518500.00

123 Supply, installation, testing and commissioning of 24HP unit with 2Nos compressor for Modular type VRV/VRF outdoor unit (Cooling & Heating only) equipped with highly efficient heremetically sealed scroll type inverter based compressor. Cost shall include pressure testing, vacuumizing, gas charging ( R-410A or as per manufacturer specification) and outdoor stand with antivibrating Polycarbonate support. The ODU unit to be BMS compatible. Rate shall be inclusive of Stickering on ODU. The unit should work in ambient temperature cooling mode (10 deg c to 56 deg c) and heating mode (-10 deg c to 24 deg c). The unit shall work during cooling mode (-10 deg c to 24 deg c) . The unit shall be suitable to work on 3phase AC power supply (380-415v 50Hz). The EER of the 24HP machine should be minimum 2.93@100% load. The ODU cooling capacity and piping conections should be as per data sheets given by manufacturer. 1.00 Each 636440.00 Rupees Six Lakh Thirty Six Thousand Four Hundred Forty Only 636440.00

124 Supply, installation, testing and commissioning of 26HP unit with 2Nos compressor for Modular type VRV/VRF outdoor unit (Cooling & Heating only) equipped with highly efficient heremetically sealed scroll type inverter based compressor. Cost shall include pressure testing, vacuumizing, gas charging ( R-410A as per manufacturer specification) and outdoor stand with antivibrating Polycarbonate support. The ODU unit to be BMS compatible. Rate shall be inclusive of Stickering on ODU. The unit should work in ambient temperature cooling mode (10 deg c to 56 deg c) and heating mode (-10 deg c to 24 deg c). The unit shall work during cooling mode (-10 deg c to 24 deg c) . The unit shall be suitable to work on 3phase AC power supply (380-415v 50Hz). The EER of the 26HP machine should be minimum 3.73@100% load. The ODU cooling capacity and piping conections should be as per data sheets given by manufacturer. 1.00 Each 676352.00 Rupees Six Lakh Seventy Six Thousand Three Hundred Fifty Two Only 676352.00

125 Supply, installation, testing and commissioning of 28HP unit with 2Nos compressor for Modular type VRV/VRF outdoor unit (Cooling & Heating only) equipped with highly efficient heremetically sealed scroll type inverter based compressor. Cost shall include pressure testing, vacuumizing, gas charging ( R-410A as per manufacturer specification) and outdoor stand with antivibrating Polycarbonate support. The ODU unit to be BMS compatible. Rate shall be inclusive of Stickering on ODU. The unit should work in ambient temperature cooling mode (10 deg c to 56 deg c) and heating mode (-10 deg c to 24 deg c). The unit shall work during cooling mode(-10 deg c to 24 deg c) . The unit shall be suitable to work on 3phase AC power supply (380-415v 50Hz). The EER of the 28HP machine should be minimum 3.50 @100% load. The ODU cooling capacity and piping conections should be as per data sheets given by manufacturer. 1.00 Each 699778.00 Rupees Six Lakh Ninety Nine Thousand Seven Hundred Seventy Eight Only 699778.00

126 Supply, installation, testing and commissioning of 74HP (20HP+20HP+20HP+14HP) combination unit for Modular type VRV/VRF outdoor unit (Cooling & Heating only) equipped with highly efficient heremetically sealed scroll type inverter based compressor. Cost shall include pressure testing, vacuumizing, gas charging ( R-410A or as per manufacturer specification) and outdoor stand with antivibrating Polycarbonate support. The ODU unit to be BMS compatible. Rate shall be inclusive of Stickering on ODU. The unit should work in ambient temperature cooling mode (10 deg c to 56 deg c) and heating mode (-10 deg c to 24 deg c). The unit shalll be suitable to work on 3phase AC power supply (380-415v 50Hz). The ODU cooling capacity and piping conections should be as per data sheets given by manufacturer. The EER of the 20HP machine should be minimum 3.30@100% load, EER of 14HP machine should be minimum 3.50@100% load. Each 20HP VRV ODU unit should be provided with 2Nos compressor Each 14HP VRV ODU should be provided with 1No or 2Nos compressor 2.00 Each 1849154.00 Rupees Eighteen Lakh Forty Nine Thousand One Hundred Fifty Four Only 3698308.00

127 Supply, installation, testing and commissioning of 2TR capacity 4-way flow VRV/VRF Cassette Type indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control complete with bottom openable service hatch with return air grill and consisting of evaporator fan capable of developing min 15mm WG of static pressure. The installation shall include supporting arrangement (10mm Hitech rods) as per site condition. Rate shall be inclusive of Stickering on IDU and 16A plug top. The unit should be able to give minium CFM of 695, cooling capacity and piping conections should be as per data sheets given by manufacturer. The unit shall be suitable for operation on single phase 230 V +/- 10%, 50Hz AC supply, complete, as required. 9.00 Each 46500.00 Rupees Forty Six Thousand Five Hundred Only 418500.00

128 Supply, installation, testing and commissioning of 1 way 1TR wall mounted VRV/VRF Hi wall unit with filter, fan and dx cooling coil with necessary supporting arrangement, controls, electronic expansion valve, decorative panel, cordless remote, complete with openable service hatch with return air grill and consisting of evaporator fan capable of developing min 15mm WG of static pressure. The installation shall include supporting arrangement as per site condition. Rate shall be inclusive of Stickering on IDU and 16A plug top. The unit should be able to give minium CFM of 375CFM, cooling capacity and piping conections should be as per data sheets given by manufacturer. . The unit shall be suitable for operation on single phase 230 V +/- 10%, 50Hz AC supply, complete, as required. 10.00 Each 23560.00 Rupees Twenty Three Thousand Five Hundred Sixty Only 235600.00

129 Supply, installation, testing and commissioning of 1 way 2TR wall mounted VRV HI wall unit with filter, fan and dx cooling coil with necessary supporting arrangement, controls, electronic expansion valve, decorative panel, cordless remote, complete with openable service hatch with return air grill and consisting of evaporator fan capable of developing min 15mm WG of static pressure. The installation shall include supporting arrangement as per site condition. Rate shall be inclusive of Stickering on IDU and 16A plug top. The unit should be able to give 600CFM, cooling capacity and piping conections should be as per data sheets given by manufacturer. . The unit shall be suitable for operation on single phase 230 V +/- 10%, 50Hz AC supply, complete, as required. 26.00 Each 27140.00 Rupees Twenty Seven Thousand One Hundred Forty Only 705640.00

130 Supply, Installation, testing and commissioning including vaccumisation and nitrogen testing of following nominal sizes of soft / hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings like bends, tees, reducers,refnets etc., as per relevant standards wherever required, with adjustable ring type hanger supports, jointing / brazing including accessories, insulated with XLPE class - O tubular insulation / with Class-O closed cell elastomeric nitrile rubber tubular sleeves sections of specified thickness as given below for suction and liquid lines, all accessories as per specifications etc. as required.

NOTE: (1) The copper piping and piping circuit should be with minimum number of joints, which shall be attained by: (a) Using one end expanded tubes (b) bending the tubes instead of using elbow joints wherever 90 degree bending is required (2) Piping should be routed at site in such a manner, that brazed joints in the refrigeration piping are kept to a minimum (3) The makes of tube fittings shall be same as that of tubes (4) The thickness of fittings used shall be same as that of the pipe (5) Cost should include MS support for copper piping. (6) Where ever the copper piping is running in the shafts, consider plastic wire wrapping. (7) Where ever the copper piping is running exposed to atmosphere , consider 24guage Aluminium cladding for protection (24G to be provided for individual pipes). (8) Rate shall include wall openings and filling of wall openings using expandable foam.

130.1 6.5 mm dia (OD) (Softdrawn) with tube thickness 1.2 mm with 19 mm thick insulation 26.00 Metre 430.00 Rupees Four Hundred Thirty Only 11180.00

130.2 9.5 mm dia (OD) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation 279.00 Metre 530.00 Rupees Five Hundred Thirty Only 147870.00

130.3 12.7 mm dia (OD) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation 50.00 Metre 728.00 Rupees Seven Hundred Twenty Eight Only 36400.00

130.4 15.9 mm dia (OD) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation 626.00 Metre 851.00 Rupees Eight Hundred Fifty One Only 532726.00

130.5 19.1 mm dia (OD) (hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation 36.00 Metre 982.00 Rupees Nine Hundred Eighty Two Only 35352.00

130.6 22.2 mm dia (OD) (hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation 26.00 Metre 1116.00 Rupees One Thousand One Hundred Sixteen Only 29016.00

130.7 28.6 mm dia (OD) (hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation 116.00 Metre 1321.00 Rupees One Thousand Three Hundred Twenty One Only 153236.00

130.8 34.9 mm dia (OD) (hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation 269.00 Metre 1450.00 Rupees One Thousand Four Hundred Fifty Only 390050.00

130.9 41.3 mm dia (OD) (hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation 30.00 Metre 1680.00 Rupees One Thousand Six Hundred Eighty Only 50400.00

131 Supply, installation testing and commissioning of 1.8TR capacity invertor 5star Hi wall DX unit (cooling and heating) complete with suitable capacity drive motor, air cooled condenser with all accessories, hermetically sealed scroll/rotary compressor outdoor unit and Hi wall units for single phase 230 V supply 5 star rated as per BEE and with suitable stabilizer with suitbale wall bracket for Indoor unit & MS stand/frame for Outdoor unit, suitable vibration isolators as required as per manufacturers recommendation, supports, necessary power/control cabling, suitably supported on trays/ split clamps etc., first charge refrigerant gas R32/R410A/R407C, cordless remote etc., including chasing, drilling, concealing and making good the same on walls and replastering of left out portion of wall with good finish and painting with matching colour etc. complete in all respects. The unit should be able to give 660CFM, cooling capacity and piping conections should be as per data sheets given by manufacturer. 5.00 Each 54400.00 Rupees Fifty Four Thousand Four Hundred Only 272000.00

132 Supply, installation, testing and commissioning of 25mm CPVC drain pipe of suitable dia for above air conditioning units, connecting the drain pans of the indoor units with necessary U-traps, elbows, fittings etc. to nearest drain point, with 9 mm thick closed cell elastomeric tubular insulation etc., including chasing, drilling, concealing and making good the same on walls and replastering of cut wall with good finish etc., complete complete in all respects as per the technical specifications. 264.00 Metre 237.00 Rupees Two Hundred Thirty Seven Only 62568.00

133 Supply, installation, testing and commissioning of AHU connected to VRF ODU - Double Skin Floor Mounted Air Handling Unit with multiple Distributor with DX VRF Coil, suitable for heating & cooling operation. (Each 60.0TR to be connected with 20HPx3 +14HPX1 VRF modular ODU's)

Fan section with Plug type with direct driven motor with outlet velocity not more than 1800 FPM and static pressure should be 50 mm wg. VRF Outdoor compatible Direct expansion type (DX coils ) of copper tube and aluminium fins construction section with 6/8 rows deep (15mm / 12mm) having 12-13 FPI with coil face velocity of 500 FPM, Filter section with synthetic fiber filters in corrugated shape rated for filter face velocity 500 FPM 10 micron Prefilter & 5 micron bag filter (MERV 8 & 13) spring mounted vibration Isolators, Limit Switch, Emergecny Light, Guard for Inspection Door. AHU motor should be of IE3 grade along with VFD & should include required electrical starter panel as per the motor selection. The doors of AHU to be provided near blower/ motor chamber and dimension of door to be minimum (500mm width and 1000mm height ). The internal wiring between the limit switches and all the AHU doors & interlock to be part of covered. UV lamp space provision should be made in the AHU. AHU should be provided with VCD and suitable fire rated canvas connections, The cost shall include 1No of digital thermostat and this should located in AHU room.

The air-handling units shall have extruded aluminum framework (2mm thick) having plasticised G.I panels having injected 40-50mm PUF of 48-kg/Cum density in between. Outer skin 0.63 mm Galvanised Sheet Steel in Prepainted finish, inner skin 0.63 mm Galvanised Sheet Steel. The drain pan shall be of 18g, SS in single layer. The frame for fan section shall be extruded aluminum. The entire AHU shall be on extruded aluminum base.

133.1 AHU: 60.0TR/24000CFM/50mm ESP/Thermal Break Profile/Floor Mounted 2.00 Each 1207795.00 Rupees Twelve Lakh Seven Thousand Seven Hundred Ninety Five Only 2415590.00

134 Supply, installation, testing and commissioning of AHU Kit for VRV/VRF Outdoor unit (OEM Make) comprisng of Electronic Expansion Valve & Control Box for 3Nos of 20HP and 1No of 14HP VRV modular odu (Heating and cooling) 2.00 Each 45949.00 Rupees Forty Five Thousand Nine Hundred Forty Nine Only 91898.00

135 Supply, instalaltion, testing and commissioning of Sheet Metal GSS Ducts Rectangular/Box (Factory Fabricated) with 120GSM Zinc Coating in accordance with the approved shop drawings complete with all accessories like vanes, flanges, hi tech suspension rods , Gaskets, anchor bolts, GI bolts & nuts, etc.,and as required by the specifications. Minor fabrication like, collars, droppers etc., may be hand fabricated at site. Note: The scope includes, the external Duct exposed to atmosphere to be cladded with 24guage Aluminium cladding.

135.1 24 G GSS ducting (0-750mm Width) 73.00 Sq Metre 1055.00 Rupees One Thousand Fifty Five Only 77015.00

135.2 22 G GSS ducting (751-1500mm Width) 1171.00 Sq Metre 1168.00 Rupees One Thousand One Hundred Sixty Eight Only 1367728.00

135.3 20 G GSS ducting (1501-2250mm Width) 100.00 Sq Metre 1352.00 Rupees One Thousand Three Hundred Fifty Two Only 135200.00

135.4 18 G GSS ducting (Above 2251mm Width) 50.00 Sq Metre 1497.00 Rupees One Thousand Four Hundred Ninety Seven Only 74850.00

136 Supply, installation, testing and commissioning of factory Fabricated double skin supply air plenum with necessary cutouts as per air distribution layout design. Plenum should be with 2mm thick aluminium hollow type profile, the outer and inner skin of the plenum should be minium 0.63mm GI with 45-50mm thick PUF injected panels. 67.00 Sq Metre 4560.00 Rupees Four Thousand Five Hundred Sixty Only 305520.00

137 Supply, installation, testing and commissioning of Accoustic insulation of thickness 25mm Open Cell Type Class 1 Nitrile Rubber / Oxide Acetate to be applied with suitable adhesives. The Acoustic Insulation shall be done to the internal of the Ducts near the AHU. 135.00 Sq Metre 1650.00 Rupees One Thousand Six Hundred Fifty Only 222750.00

138 Supply, installation, testing and commissioning of Thermal insulation at the tail end of the ducts of thickness 16 mm Closed Cell Type Class O XLPE with alluminium face to be applied with suitable adhesives & finished with tape at insulation joints. The Thermal Insulation shall be done to the external of the Ducts. 569.00 Sq Metre 660.00 Rupees Six Hundred Sixty Only 375540.00

139 Supply, instalaltion, testing and commissioning of Al. Powder coated Linear Continuous / Discrete grilles with Fixed Bar Louvres painted in suitable colours (Broken White/Off White/Black). 9.00 Sq Metre 8500.00 Rupees Eight Thousand Five Hundred Only 76500.00

140 Supply, instalaltion, testing and commissioning of GSS Duct Volume Control Dampers made out of 18G Frame & 20G louver to control the air flow in the ducts with suitable lever/handle 5.00 Sq Metre 11500.00 Rupees Eleven Thousand Five Hundred Only 57500.00

141 Supply, instalaltion, testing and commissioning of Al. Collar Damper with adjustable louvres to control the air flow at the Air Terminal Device. 3.00 Sq Metre 7200.00 Rupees Seven Thousand Two Hundred Only 21600.00

142 Supply, instalaltion, testing and commissioning of Al. Powder Coated Fresh air louver made out of 18G Frame & 20G Louver. 2.00 Sq Metre 11690.00 Rupees Eleven Thousand Six Hundred Ninety Only 23380.00

143 Supply,installation,testing of Underdeck insulation for roof slabs exposed to sun using 19mm thick XLPE Foam stuck to the under side of the slab with Low VOC adhesive and held in place with necessary GI washers. 497.00 Sq Metre 560.00 Rupees Five Hundred Sixty Only 278320.00

144 Supply,installation,testing of Accoustic lining for AHU room walls using 50 mm thick Engineered elastomeric open cell nitrile rubber insulation having density of 140 to 180kg/m3 and thermal conductivity of 0047 w/m deg k at 20deg c . The fire range of the insulation should be class 1 rating BS 476 part7. The sound absorption of the insulation should be as per ISO 354. The frame work of 26G GI C sections of 1000 x 500 grid and finished with 24 G Aluminium Perforated sheet & GI fasteners.All perforated sheets joints to be finished with Aluminium beading. 365.00 Sq Metre 3860.00 Rupees Three Thousand Eight Hundred Sixty Only 1408900.00

145 Supply,installation,testing and commissioning of Fire dampers fabricated out of 16 G GI complete with outer frame, damper blades, GI sleeves, Fusible Links and suitable flange for connecting to the duct. The price shall include fire sealant around the dampers after installation. 6.00 Sq Metre 10500.00 Rupees Ten Thousand Five Hundred Only 63000.00

146 Supply and installation of heavy duty Drain Pump with 4 litre ss storage tank with in built drain pumps (1W+1S) . Tank and pumps shall be housed in tray and supported to wall/ceiling as per site conditions . Pump controller should be microproceesor based able to control two pumps and controller should provide RS485 for communication and indicate fault in case of failure of any pump. 4 digit 7 segment LED display to be provided to know the status of pumps . The unit should be able to work in 1phase 230V power supply. 8.00 Each 46025.00 Rupees Forty Six Thousand Twenty Five Only 368200.00

147 Supply, fabricating and installing of following size perforated GI cable trays without cover including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling/fixing to the wall/RCC beam/iron structures including M.S. angle supports and fixing hardware etc., complete in all respects as directed by Engineer in charge.

147.1 Supply & fixing of 300 x 150 x 2mm thick trays. 201.00 Metre 1100.00 Rupees One Thousand One Hundred Only 221100.00

148 Supply, installing, testing and commissioning of Jet diffuser eye ball type of 400mm dia. The jet diffuser should be able to through 1500CFM for a distance 6.6m with neck velocity of 11m/sec. The diffuser material should be aluminium type and diffuser spout should be fully reversible having rotation of 180deg. The diffuser has to be fixed to rectandular ducts with required collar damper and fixing accessories to complete the installation. 31.00 Each 3250.00 Rupees Three Thousand Two Hundred Fifty Only 100750.00

Sub-Total of SEC - 'III' -AIR CONDITIONING WORKS Rupees One Crore Sixty Nine Lakh Ninety Five Thousand Two Hundred Fifty Seven Only 16995257.00

Total of Part 'I' +Sec 'II' + Sec 'III' (Excluding GST) Rupees Thirteen Crore Fifty Eight Lakh Seven Thousand Three Hundred Eighty and Ninety Five Paise Only 135807380.95

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 135807380.95 BELOW % 135807380.95

Add 18% GST Rupees Two Crore Forty Four Lakh Forty Five Thousand Three Hundred Twenty Eight and Fifty Seven Paise Only 24445328.57

Grand Total (Including GST) Rupees Sixteen Crore Two Lakh Fifty Two Thousand Seven Hundred Nine and Fifty Two Paise Only 160252709.53

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Facilities Management Division

Pre-Qulification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: HAL/FMD/C-150/24-25

Name of Work: Construction of Module Change Workshop [MCW], Shed and Allied Works including Civil, Electrical and Air-conditioning works at Air force Station NAL, Bikaner.

Estimated Amount in lakhs.: 1602.5

Tender Notice Date:(DD/MM/YYYY) 26.02.2025 Can we give in DD/MM/YYYY

Complition Period(In months) 18

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3 Kindly mention at Col I J &K as " Any Other related Information"

Sl.No Description Details Enclosed / Not Enclosed Any Other Related Information Remarks

1 Name of the Individual / Firm / Company: * Mandatory Pls enter name

2 Type of ownership Related Document to be Uploaded to eProcurement Portal

3 Year of Estblishment of Company/Business

4 If Other, please specify

5 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc., If not enclosed reasons be to recorded here

6 Address for correspondence:

8 PAN no and Name of Holder

9 PF number (If any)

11 (a) Service Tax Registration No

11 (b) Goods and Service Tax ID No.

12 Contact details

Contact person name Pls

Ph. No. with STD code

FAX No. with STD code 5 6

13 Registered Contractor

If Registered Contractor with HAL Yes/ No Pls Enter Related Document to be Uploaded to eProcurement Portal * Category: A = Above 25 Crores B = 15Crore to 25 Crores C = 5Crore to 15 Crores D = 1 Crore to 5 Crores E = Lessthan 100 Lakhs to 75 Lakhs F = 75 Lakhs to 50 Lakhs 0 7 .A1 1

Name of Organisation 199999 7 A 2

Category and Registration No. 200000 6 B 3

PEMD Amount ( If paid ) 499999 6 C 4

not required Need to Fill Column 19 no comparision 500000 5 D 5

14 I.T Returns for past 03 years 999999 5 E 6

2024-25 Pls Select 'Yes','No' for IT Returns for all the 3 years 2499999 4

15 Maximum value of works excuted during the followinf 5 years. . (In Lakhs)

2019 - 2020 Pls enter Finiancial Turnover in Rupees for all the years NOTE: The value of max work to be supported with the details of Works executed for each year including name of the organisation with period of execution. Here last 3 years cells to be considered to Check Annual Turn Over for 30 % value of Estimation given above 1 6.00 7.00 0 0

Avg Annual Turnover criteria is not met

16 DETAIL OF WORK ON HAND UPTO N-Months (N-contract period) [For Bid capacity calculation] NOTE : PROVISION for 10 works are given. If more, a separate similar sheet to be made showing all the works with all details as per this FORMAT and same to Uploaded. However, 9 works details to be provided and balance work value of other works to be added and to be provided in 10th row as OTHER works.

Sl.No(work No) Name of Organization with address Name of the work on hand Amount of Contract Rs (in Lakhs) Period of CONTRACT in months Date of Commencement of work as Work Order in dd/mm/yyyy Probable date of Completion as Agreed Actual progress achieved till date of Tender Notification Rs (in Lakhs) Balance value of work on hand [Col.(3)-Col.(7)] Rs (in Lakhs) Remarks If Any 0.00

8 0.00 Max Turn Over 07-08 8500000

9 0.00 Current Level to be brought by adding 10% for every year 10-11 8500000 X 1.1 X 1.1 X 1.1

10 0.00 Turn Over to considered A 11313500

0.00 Balance Work On Hand 207452000

Bid Capacity 0.00 Bid Capacity Criteria is not Met this shouldf be hidden while uploading

17 Work Schedule for completion of works with in stipulated time [Please enclose action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)] Bid Capacity (2 X A X N) - B

Related Document to be Uploaded -162198000

18 Quantity of work Excuted during the last three years

Earthwork [in Cum]

Concrete work [in Cum]

Reinforcement steel [in MT]

Any other quantity of items tenderer would like to mention

19 Bank(s) details: [Copy of the cheque leaf to be uploaded]

19a Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Name of the Bank

Type of Account

19b Bank Statement for past three month

19c Latest Over draft Facilties with Bank enter Name of Bank, Date of Issue and Value of Over Draft

20 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender Notice. SOLVENCY solvency cal

Name of Bank & Branch Pls Related Document to be Uploaded to eProcurement Portal 26.02.2025 1-Jul 0 40000

Date of Issue(dd-mm-yyyy) #VALUE! 200000 40000

Value Rs. In Lakhs 200001 150000

Solvency value is as per NIT

21 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Work experience certificates / Completion certificates should be uploaded for verification]. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost. [Amount put to the Tender] 40000 500001 250000

Completed similar works during last 7 years You are Not Eligible Pls Select Works Completed during last 7 years 1000000 250000

Work NoI Type of Work [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000

Name of The organisation

Brief Description of Work: 2000000 500000

Completed value of Work in Rs. Lakh: 2000001 1000000

Date of Commencement of Work [DD/MM/YYYY]: 4000000 1000000

Date of Actual Completion of Work[DD/MM/YYYY]: 4000001 2000000

Work No II Type of Work [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000

Name of The organisation

Brief Description of Work

Completed value of Work in Rs. Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]: work done

Work No III Type of Work and Organisation name [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 26.02.2025 2555

Name of The organisation

Brief Description of Work: #VALUE!

Completed value of Work in Rs. Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Work Competion is NOT with in 7 years

Valid Class I Electrical Licence [or] Undertaking for engaging Electrical Contractor possessing valid Class I Electrical Licence Please Enter Electricial Licence No Electricial Licence valid upto Related Document to be Uploaded to eProcurement Portal

22 DEAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficant separate sheet to be uploaded with the same format as below)

Sl.No Name of members or technical personllel avalable in the organization Qualification of similar nature number of years of experience

23 DETAILS OF MACHINERY AVAILABLE

Sl.No Name of Mechinery No Make Year of Manufacture

1 Concrete Mixers - Type etc

2 Vibrators - Diesel - Electrical

3 Weiding equipment's

4 a) Rectifiers

5 b) Welding Generators

6 Erection equipment's

10 Water Lifting motor pumps

13 Drilling Equipment's

16 Stone crushers

17 Bitumen hot mixture plant

18 Bitume boiler

20 Batching plants

21 Vibratory rollers

23 Cranes-Details

24 Concrete pumps

26 Rock breakers

27 Transit mixers

29 Weight batches

24 Details of person holding the power of Attorney (If different from contact person)

Name Related Document to be Uploaded to eProcurement Portal

Ph. No. with STD code

FAX No. with STD code

I/We declare and confirm that - 1. All information and attachments submitted in this application are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my application and suspension of any registrations granted. 3. I/We shall not make refund claims of expenditure incurred in processing this application. Pls enter

26 Tender Document Cost and EMD details

Descipttion Enclosed / Not enclosed Valid upto [in case of BG] Related Document to be Uploaded to eProcurement Portal

Tender cost Enclosed

27 Average annual financial turn over during the last 3 years, ending 31st March 2024 [ should not be less than 30% of amount put to tender] and details for last 5 years to be provided to assess the bid capacity. The values provided to be supported by uploading Balance Sheet along with Profit & loss account statement. . (In Lakhs)

2023-24 Pls Select 'Yes','No' for Annual financial turn over for all the 3 years

Average 0.00 FALSE

Balance sheet and Profit & loss statement for last 05 years