REPAIR AND MAINT OF INTERNAL ROADS, FURNITURE AND ROAD PAINTING AT KASAULI MIL STATION UNDER GE KASAULI

Amount

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with air compressor to remove all loose dirt etc complete all as specified and directed.

M&L for applying evenly a priming/tack coat of viscosity grade paving bitumen VG-10 confirming to IS-73 : 2006 @5 kgs /10 sqm on black surfaces complete all as specified and directed.

M&L for Bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 6% binder content by weight by total mix, using paving bitumen of VG-10 grade rolled and compacted to required camber and gradient complete all as specified and directed. Note :- (i) Automatic hot mixing plant of adequate capacity shall be used for heating and mixing of aggregate, bitumen etc for premix semi dense asphaltic concrete and mix for both items shall be laid with mechanical pavers. (ii) Quantity of bitumen in semi dense asphaltic concrete shall be used as per design mix and shall be approved by the GE. Any variation in quantity of bitumen in desigm mix shall be priced as specified in the particular specification through deviation order. Unit rate quoted shall deemed to include the cost of design mix.

M&L for premix bituminious macadam (Consolidated thickness 75mm or less) with binder content 4% by weight of total mix & roll with 8 to 12 tonne power road roller and compacted to required camber, gradient complete all as specified and directed.

M&L for repair to pot holes, any depth, not exceeding 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces of black top, cutting around edges at least 25mm in depth & making good by filling in screened & graded road metal, watering and well ramming (including supply or road metal) and inspected/approved before laying the premix carpet complete all as specified and directed.

M&L for applying evenly a priming/tack coat of viscosity grade paving bitumen VG-10 confirming to IS-73 : 2006 @10 kg/10 sqm on black surfaces i.e. pot holes and below Bituminous macadam complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in hard standing including necessary form work and finishing surface even and fair without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base to flooring including necessary form work complete all as specified and directed.

M&L for Machine pressed prepolished precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 80mm thickness, M-40 grade with grey cement with pigment over screed bed or bedding layer of mortar 20mm thick CM 1:6 for laying complete all as specified and directed.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F for cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS as per manufactures instructionsstud of suitable size as per manufactures instructions complete all as specified and directed.

S&F for ABS plastic heavy duty speed breakers of size length -350mm,wdth - 250mm & height - 50mm with inbuilt reflectors (04 Nos each piece ) made from specially compouded plastic for greater durability and in yellow & black colour combination, inter lockng type and fixed with steel screw & adhesive as per manufacturer instruction complete all as specified and directed.

S&F for solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed.

S&F for metal tubular dealineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B-1 using 20mm graded stone aggregate complete all as specified and directed.

Plastic dividing strips, 38mm wide 1.50mm thick inserted in position complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:4 as in retaining wall ,parapet wall etc complete all as specified and directed.

All as per item No -19 here-in-before but except stone complete all as specified and directed.

M&L for Rendering 15mm thick cement plaster in CM 1:4 on Brick work complete all as specified and as directed.

S&F for Manufacturing, supplying and fixing retro of 900 mm diametre with support length of 3750mm and made up of 2mm thick aluminium sheet, face to be fully covered withhigh intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of up to 500m or under, including loading, unloading and stacking at the destination (1Load =0.65 Cum) complete all as specified and directed.

Sagar Builders

Vinod Kumar Aggarwal

Vishal Builder