REPAIRS/RE-CANNING/POLISHING AND PAINTING TO WOODEN FURNITURE ITEMS AT AIR FORCE STATION YELAHANKA AND CQAE BANGALORE UNDER GE(AF)YELAHANKA

Amount

M & L for Polishing the following Furniture items with French Polish with high glossy finish including fillings of holes/cracks with bees wax and smoothing with sand paper. NOTE : Polishing shall be carried at furniture yard of BSO GE (AF)Yel/Offr Md Accn/Domestic Area/Tech Area of AF Stn Yel/CQAE(WE) Bangalore all as specified and as directed by the Engineer-in-Charge.

Bed with ply top(FD - 246)

Bin soiled Linen(FD - 244)

Book Case open Small(FD - 355)

Chair Dinning/WBB(FD - 279)

Chair Easy(FD - 229 / 281)

Chair Writing / Chair Writing Wooden(FD - 202 / 280)

Hat Stand with Mirror (FD - 361 / 362)

Peg Table (FD - 236 / 277 / 384)

Sofa set 5 seater (FD - 281/373)

Sofa Chair Single Seater (FD - 281/373)

Stool Dressing CB(FD - 282 / 374)

Table Writing (FD - 275)

Table 3’x3’ Wooden / Table Card(FD - 88 / 288)

Table Dining 6 Persons(FD-239/273/376 & FD/MAP-II/03)

Table Dining 8 persons (FD-239/273/376)

Table Centre(FD - 235 / 375)

Table Office Clerk Wooden

Teapoy(FD - 232 / 278)

Table Bed Side(FD - 248 / 276)

Table 3’x2’ / one piece all purpose(FD - 224 / 283)

Table Dressing Gents(FD - 230 / 379)

Table Dressing Ladies(FD - 378)

Table Office Officer Wooden

Table 1520 x 860 x 760 mm(FD - 139)

Table Conference(FD - 287)

Table Various types

Board Notice 6' x 4'(FD - 99)

Board Notice 8' x 4'(FD - 99)

Chair Dining long back (FD - 357)

Chair Easy cushioned(FD - 229 )

Side board large(FD - 372)

Lab Test Table

Hat stand

Removing existing worn-out plastic cane from Chairs wooden/ stool dressing CB/Bin soiled linen and re-canning the same with superior quality Plastic Cane 2 mm wide (white/cream) and provide beading with superior quality Plastic Cane 3 mm wide and all as directed by the Engineer-in-Charge. Make : Maharashtra Plastic/Shah & Shah or equivalent.

CHAIR DINING(FD-279)

Removing the broken/unserviceable rear legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

All as per item No 3.01 above for front legs.

All as per item No 3.01 above for side rails of seat frame.

All as per item No 3.01 above for front rails of seat frame.

All as per item No 3.01 above for back batten.

All as per item No 3.01 above for bottom stiffener.

Removing old / unsv PVC rings from Chair Dining and S & F the same with new one

CHAIR EASY(FD - 229 / 281)

Removing the broken/unserviceable rear legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

All as per item No 4.01 above for front legs.

All as per item No 4.01 above for side rails of seat frame.

All as per item No 4.01 above for front rails of seat frame.

All as per item No 4.01 above for side rails of back frame.

All as per item No 4.01 above for top rails of back frame.

All as per item No 4.01 above for Arms.

All as per item No 4.01 above for back battens

All as per item No 4.01 above for stiffners

Removing old / unsv PVC rings from Chair Easy and S & F the same with new one

CHAIR WRITING(FD - 202 / 280)

Removing the broken/unserviceable rear legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

All as per item No 5.01 above for front legs.

All as per item No 5.01 above for side rails of seat frame.

All as per item No 5.01 above for front rails of seat frame.

All as per item No 5.01 above for Arms.

All as per item No 5.01 above for back batten.

All as per item No 5.01 above for bottom stiffener.

Removing old / unsv PVC rings from Chair Writing and S & F the same with new one.

CHAIR WOODEN BOTTOM(FD - 225/285)

Removing the broken/unserviceable rear legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

All as per item No 6.01 above for front legs.

All as per item No 6.01 above for unserviceable plywood bottom.

All as per item No 6.01 above for back batten.

All as per item No 6.01 above for Stiffeners.

PEG TABLE (FD - 236 )

Removing the broken/ unserviceable legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

All as per item No 7.01 above for table top.

All as per item No 7.01 above for Stiffeners.

SOFA CHAIR SINGLE SEATER(FD - 281/373)

Removing existing unserviceable PU Foams and provide new foams of 40 density X 100 mm thick, shape and size as per existing and shall be covered with superior quality of Tapestrey cloth over a cloth malmal. The cost of Tapestrey cloth not less than Rs.500/- per meter. Make of Foam : Sleepwell / Kurlon or equivalent.

All as per item No 8.01 above for rear legs.

All as per item No 8.01 above for front legs.

All as per item No 8.01 above for side rails of seat frame.

All as per item No 8.01 above for front rails of seat frame.

All as per item No 8.01 above for Arms.

All as per item No 8.01 above for bottom rails.

SOFA CHAIR THREE SEATER(FD - 281/373)

Removing existing unserviceable PU Foams and provide new foams of 40 density X 100 mm thick, shape and size as per existing and shall be covered with superior quality of Tapestrey cloth over a cloth malmal. The cost of Tapestrey cloth not less than Rs.500/- per meter.

All as per item No 9.01 above but for rear legs.

All as per item No 9.01 above but for front leg.

All as per item No 9.01 above but for side rails of seat frame.

All as per item No 9.01 above but for front rails of seat frame.

All as per item No 9.01 above but for back rails of seat frame.

All as per item No 9.01 above but for Arms.

TABLE WRITING (FD-275/249)

Removing the broken/unserviceable legs and S&F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

All as per item No 10.01 above for unserviceable drawers.

All as per item No 10.01 above for top.

All as per item No 10.01 above for bottom stiffener.

S & F of new knobs for Table drawers .

Removing old / unsv PVC rings from Table Writing and S & F the same with new one

TABLE DINING FOR 6 /8PERSONS (FD-239/273/376)

Removing the broken/unserviceable legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

All as per item No 11.01 above for table top.

All as per item No 11.01 above for bottom stiffener.

Removing old / unsv PVC rings from Table Dining and S & F the same with new one

TABLE CENTRE(FD - 235 / 375/274)

Removing the broken/unserviceable legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specification and as directed by the Engr-in-charge.

Removing old broken /unserviceable top and S & F new top of pre laminated particle board 18 mm thick. The dimension of the parts shall be of the same pattern/size as shown in drawing & specification.

All as per item No 12.01 above for bottom stiffener.

Removing old / unsv PVC rings from Table Centre and S & F the same with new one

TABLE BED SIDE (MAP)(FD - 248 / 276)

Removing the broken/unserviceable legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

All as per item No 13.01 above for table top.

All as per item No 13.01 above for drawer handles.

TEAPOY(FD - 232 / 278)

Removing the broken/unserviceable legs and S & F new legs made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

All as per item No 14.01 above for top.

All as per item No 14.01 above for bottom stiffener.

BED WITH PLY TOP.

Removing the broken/unserviceable long rails from Bed and S&F new long rails made out of Honne wood. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

All as per item No 15.01 above for head board.

All as per item No 15.01 above for foot board.

All as per item No 15.01 above for plywood top.

All as per item No 15.01 above for legs.

Removing old / unsv PVC rings from Bed Plytop and S & F the same with new one.

TABLE 3' x 2' WITH / WITHOUT DRAWERS(FD - 224 / 283)

Removing the broken/ unserviceable leg and S & F new leg made out of First Class teak wood well seasoned. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

All as per item No 17.01 above for drawers.

All as per item No 17.01 above for table top.

All as per item No 17.01 above for bottom stiffener.

S & F of new knobs for Table drawers .

Removing old / unsv PVC rings from Table and S & F new PVC rings of the same .

TABLE DRESSING GENTS WITH MIRROR(FD - 230 / 379)

Removing the broken/ unserviceable dressing chest made out of pre laminated particle board and S & F of the same as per pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing old Unserviceable plywood 6 mm thick from Table Dressing, S & F new 6 mm thick BWR Commercial Plywood as per existing shape and Sizes and as directed by the Engineer-in-Charge.

All as per item No 17.01 above for mirror 3 mm thick.

S & F of new knobs for drawers .

TABLE DRESSING LADIES WITH MIRROR(FD - 378/251)

Removing the broken/ unserviceable dressing chest made out of pre laminated particle board and S & F of the same as per pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

Removing old Unserviceable plywood 6 mm thick from Table Dressing, S & F new 6 mm thick BWR Commercial Plywood as per existing shape and Sizes and as directed by the Engineer-in-Charge.

All as per item No 18.01 above for mirror 3 mm thick.

S & F of new knobs for drawers .

Repair & removing old drawers from Table dressing, supply and fixing new drawers made out of 1st class seasoned teak wood

Removing old / unsv PVC rings from Table and S & F new PVC rings of the same .

CHAIR DINING OFFICER(FD/MAP-II/04)

Removing existing unserviceable PU Foams from and provide new foams of 40 density x 75 mm, shape and size as per existing and shall be covered with superior quality of Tapestrey cloth over a cloth malmal. The cost of Tapestrey cloth not less than Rs.500/- per meter. Make of Foam : Sleepwell / Kurlon or equlivelent.

All as per item No 19.01 above for rear legs.

All as per item No 19.01 above for front legs.

All as per item No 19.01 above for side rails of seat frame.

All as per item No 19.01 above for front rails of seat frame.

All as per item No 19.01 above for Stiffeners.

All as per item No 19.01 above for bottom rails.

CHAIR DINING LONG BACK (FD - 357)

Removing existing unserviceable PU Foams and provide new foams of 40 density x 75 mm for seat and 50 mm for back, shape and size as per existing and shall be covered with superior quality of Tapestrey cloth over a cloth malmal. The cost of rexine not less than Rs.400/- per meter. Make of Foam : Sleepwell / Kurlon or equlivelent.

All as per item No 20.01 above for rear legs.

All as per item No 20.01 above for front legs.

All as per item No 20.01 above for side rails of seat frame.

All as per item No 20.01 above for front rails of seat frame.

All as per item No 20.01 above for stiffeners.

All as per item No 20.01 above for bottom rails.

SIDE BOARD(FD - 371)

Removing the broken/ unserviceable plywood S & F 6 mm thick BWR commercial plywood as per exisitng pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

S & F of new knobs for drawers of side board.

Repairs to drawers of side board.

COMPUTER TABLE(FD/E6/MAP/03)

Removing the broken/ unserviceable drawers and S & F new drawers made out of pre laminated particle board. The dimension of the parts shall be of the same pattern/size as shown in drawing & specifications and as directed by the Engr-in-charge.

S & F new knobs for drawers.

S & F new knobs PVC beading.

ALMIRAH LARGE STEEL WITH SHELVES. FD - 1031

M & L for removing paint from Almirah Large Steel by Scratching at various damaged places, filling putty, painting complete with one coat of synthetic enamel paint (Mushroom/Olive green colour) over a coat of red oxide primer internally and externally by using spray gun machine all as specified or as directed by Engineer-in-Charge. Note : Supply and Fix new components including removal of old unserviceable parts will be measured and paid separetly.

S&F shelves of Almirah large Steel, shape & size of shelves as per existing one, size of MS sheet shall be not less than 1mm thick and including removing old shelves and welding/rivetting/cliping as required complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of locks as per existing pattern including removing old lock complete all as specified and as directed by Engr-in-Charge. Make:Godrej/Link/Bharat

Supply and fixing Chromium plated handle including removing old handle complete all as specified and as directed by the Engineer-in-Charge. Make:ISI Marked

S&F Legs made out of 1mm thick MS sheet for Almirah medium and welding/rivetting as required including removing old legs complete all as specified and directed by Engineer-in-Charge.

ALMIRAH MEDIUM STEEL WITH SHELVES . FD - 1032

M&L for removing paint from Almirah medium Steel by Scratching at various damaged places, filling putty, painting complete with one coat of synthetic enamel paint (Mushroom/Olive green colour) over a coat of red oxide paint internally and externally by using sprayer gun machine all as specified or as directed by the Engineer-in-Charge. Note: Supply and Fix new components including removal of old unserviceable parts will be measured and paid separately.

Supply and Fixing shelves of Almirah large Steel, shape & size of shelves as per existing one, size of MS sheet shall be not less than 1mm thick and including removing old shelves and welding/rivetting/cliping as required complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of locks as per existing pattern including removing old lock complete all as specified and as directed by Engr-in-Charge. Make:Godrej/Link/Bharat

Supply and fixing Chromium plated handle including removing old handle complete all as specified and as directed by the Engineer-in-Charge. Make:ISI Marked

S&F Legs made out of 1mm thick MS sheet for Almirah medium and welding/rivetting as required including removing old legs complete all as specified and directed by Engineer-in-Charge.

CHARPOY GI PIPE WITH PLYWOOD TOP . FD - 220

Removing of old unserviceable / broken long rails from Charpoy GI Pipe with plywood top and S & F of new long rails duly made out by GI pipe 32 mm dia, medium grade.

Removing of old broken Short rails from Charpoy GI pipe with ply woodtop and S & F of new short rails duly made out by GI pipe 32mm dia, Medium grade.

Removing of old unserviceable / broken legs from Charpoy GI pipe with ply wood top and S&F new legs duly made out by GI pipe 32mm dia, Medium grade.

Removing old unserviceable / broken short rails from Charpoy GI pipe with ply wood top and fixing another short rails duly made out by long rails obtained from item ser No 25.01 above including cutting and one end threading and another end welding MS washer of suitable size all as specified.

Removing old unserviceable / broken legs from Charpoy GI pipe with ply wood top and fixing another legs made out by old long/short rails obtained from item ser no.25.01 and 25.04 above including cutting and one end threading and another end welding MS plate 3mm thick of suitable size all as directed.

Removing old unserviceable / broken GI Elbow from Charpoy GI pipe with plywood top and S & F new 3 way Elbow 32 mm dia with ISI marked.

Removing old broken GI Check nut from Charpoy GI pipe with plywood top and S & F new Check nut 6 mm thick 32mm dia with ISI marked.

S&F 12 mm thick Ply Wood commercial BWR, ISI marked of size 1980 mm x 900 mm and rounded edges on four conrners fixed with GI bolts and nuts 6 mm dia 75 mm long with washers 3 mm thick on GI Charpoy and removing existing unserviceable plywood 12 mm thick from GI Charpoy ply wood top. (FD-220) all as specified and directed by the Engr-in-Charge.

Removing / Missing U/S Iron Flat from Charpoy GI Pipe Plywood top, S & F 02 nos new Flat iron of size 900 x 40 x 5 mm thick shall be provided to Charpoy GI Pipe on both the sides. ISI marked

CHAIR COMPUTER. (TP)

Removing existing unserviceable PU Foam from Chairs and provide new PU Foam 50 mm thick for seat & back shall be covered with superior quality tapastry cloth over a cover of cloth malmal.Cost of tapastry cloth shold not be less than Rs 400/- per merter, Make of PU foam. Sleepwell / Kurlon / Dunlop (40 density).

Removing existing unserviceable base and supply & fixing new base suitable for Caster wheels as per existing size and shapes.

Removing existing unserviceable adjustuble mechanism and S & F new suitable adjustable mechanism as per existing shape.

Removing existing unserviceable rubber handle and S & F new suitable rubber handle as per existing only.

Removing existing broken unserviceable Castor wheels and S & F new suitable Caster wheel as per existing shape and size.

ALMIRAH LARGE STEEL WITH GLASS DOORS (FD - 104 (M)

M&L for removing old paint from Almirah Large Steel with glass door by Scratching at various damaged places, filling putty, painting complete with one coat of synthetic enamel paint (Mushroom/Olive green colour) over a coat of Red oxide paint, internally and externally by painting with sprayer gun machine all as specified and as directed by the Engineer-in-Charge. Make : Asian/Berger/ Shalimar

Removing unserviceable/ broken glass from Almirah and S & F the same as per existing shape size and or as directed by the Engr-in-charge.

S&F three way locking device as per existing/suitable locking device complete all as specified and dierected by Engineer-in-Charge. Make of Lock : Godrej / Link / Bharat.

CHAIR CB STEEL WITH ARMS (FD - 75) (M)

M&L for painting of Chair CBO Steel with arms with one coat of synthetic enamal paint on steel surface and polishing with French polish on wooden surface all as directed by Engr-in-Charge. Make : Asian/Berger / Shalimar. Note:- S&F new components /parts including removal of old unserviceable components/parts willl be measured & paid separately.

S&F 1st class teak wood seat duly canned with 2mm plastic cane and polishing on wooden surfaces including removing old one.

S&F 1st class teak wood back duly canned with 2mm plastic cane and polishing on wooden surface including removing old one.

S&F PVC Shoes for Chair CBO Steel with arms incuding removing old one.

S&F 1st class teak wood handle rest with polishing for Chair CBO Steel with arms including removing old one.

CHAIR CB STEEL WITHOUT ARMS (FD - 75 (M)

M & L painting with one coat of synthetic enamel paint on steel surface and polishing with french polish on wooden surface all as specified and directed. Note: S&F new components /parts including removing old unserviceable components/parts will be measured & paid separately.

S&F Seat made out 1st class teak wood canned with 2mm plastic cane for including removing old one.

S&F back made out 1st class teak wood canned with 2mm plastic cane for including removing old one.

S&F PVC Shoes for Chair CBB Steel with arms incuding removing old one.

CHAIR VARANDAH. FD - 359

Removing broken /Unserviceable Plastic Cane from Chair Varandah and re-canning with 4mm wide Plastic Cane of superior quality (white/cream) after painting one coat with synthetic enamel White Paint duly complete the welding works wherever required and all as directed by Engineer-in-charge. Make : Shah & Shah / Maharashtra canes.

Removing broken / Unserviceable PVC shoes and S & F new PVC shoes for Chair Varandah.

CHAIR DINING LONG BACK. FD - 357

Removing old Unserviceable PU Foams and provide new PU Foam 75 mm thick for Seat and 50 mm thick Foam for back shall be provided and covered with rexine. Make of PU Foam: Sleepwell / Kurlon /Dunlop. (40 density)

Removing old / Unsv PVC rings from Chair Dining long back and S & F the same with new one.

BOOK SHELF OPEN LARGE STEEL. FD - 69 (M)

M & L for removing old paint from Book shelf open large Steel by Scratching & scaring at various damaged places, filling putty, painting complete with one coat of synthetic enamel paint (Mushroom/Olive green colour) over a coat of red oxide paint internally and externally by painting with sprayer gun machine all as specified and directed by Engineer-in-Charge.

RACK SIDE 3 / 4 SPACES STEEL. FD - 1023

M&L for removing old paint from Rack side 3/4 Tray Steel with shelves by Scratching & scaring at various damaged places, filling putty, painting complete with one coat of synthetic enamel paint (Mushroom/Olive green) over a coat of red oxide primer internally and externally by painting with sprayer gun machine all as specified and directed by Engineer-in-Charge.

SOFA SET 5 SEATED. FD - 258 / 281

Removing existing Un-serviceble Foam cushions from Sofa Set 5 Seater and provide new Foam of size 530 x 510 x 100 mm thick for seat and 530 x 510 x 75 mm for back and shall be covered with superior quality tapestry cloth over a cover of cloth Malmal. Cost of tapestry should not be less than Rs.500.00 per meter. Make of PU foam : Sleepwell/Kurlon/Dunlop (40 density).

Removing old / unsv PVC rings from Sofa Set and S & F the same with new one

CHAIR REVOLVING ADJ / VISITOR (TP)

Removing existing Unserviceable Foam Cushions from Chair revolving adjustable and provide new PU foam 50 mm thick for seat & back shall be covered with superior quality Tapastry Cloth over a cover of cloth malmal. Cost of Tapastry should not be less than Rs.500/- per meter, Make of PU foam : Sleep well / Kurlon / Dunlop (40 density) .

Removing of existing unserviceable base and Supply & fixing new base with suitable shape and size as per existing .

Removing existing unserviceable adjustuble mechanism and S & F new suitable adjustable mechanism as per existing shape and size.

Removing existing broken unserviceable rubber handle and S & F new suitable rubber handle.

Removing existing broken unserviceable Caster wheels and S & F of new Caster wheels as per existing size.

LAB TEST TABLE / LIBRARY RACKS. FD - 140

Removing old broken / Unserviceable legs and S & F new leg made out of First Class well seasoned teak wood . The dimension of the parts shall be of the same pattern/size as shown in drawing & specification.

Removing the broken / Unserviceable Top and S & F new top of Pre Laminated Particle Board 1880 X 1100 X 1320 and 960 X 460 X 1830 X 18 mm thick. The dimension of the parts shall be of the same pattern /size as shown in drawing & specification.

Removing old / Unsv PVC rings from Lab Test Table and S & F the same with new one.

TABLE OFFICE CLERK STEEL WITH DRAWERS. FD - 84(M) & 381

M & L for removing old paint from Table Office Clerk Steel by Scratching at various damaged places, filling putty, painting complete with one coat of synthetic enamel paint (Mushroom/Olive green) over a coat of Red oxide primer internally and externally by painting with sprayer gun machine all as specified and directed by Engineer-in-Charge.

Removing the broken / unserviceable Top and S & F new top of Pre laminated particle board 1880 X 1100 X 1320 and 960 X 460 X 1830 X 18 mm thick. The dimension of the parts shall be of the same pattern /size as shown in drawing & specification.

Removing old / Unsv rubber shoes from Table Office Clerk Steel and S & F the same with new one.

TABLE OFFICE OFFICER STEEL WITH DRAWERS. FD - 84 (M) & 1002

M & L for removing old paint from Table Office Clerk Steel by Scratching at various damaged places, filling putty, painting complete with one coat of synthetic enamel paint (Mushroom/Olive green) over a coat of Red oxide paint internally and externally by painting with sprayer gun machine all as specified and directed by Engineer-in-Charge.

Removing the broken / unserviceable Top and S & F new top of Pre laminated particle board 1880 X 1100 X 1320 and 960 X 460 X 1830 X 18 mm thick. The dimension of the parts shall be of the same pattern /size as shown in drawing & specification.

Removing old / Unsv rubber shoes from Table office officer steel and S & F the same with new one.

NOTES :(1) For carrying out the shifting / stocking/transporting/cleaning/receiving/depositing etc., required manpower to be provided by Contractor . (2) All painting work shall be carried out by the contractor with spray painting with spray gun machine. (3) All old un-serviceable materials retrieved from repair work should be cleaned and taken out from site and disposed off. (4)The above provisions shall be deemed to be included in the Quoted Rates.

chowdeshwariconstructionco

Vivek Engineers

SHANMUGA TRADERS