Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.9 LAccepted-AOC | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹51.5 L+₹99,048.60 (1.96%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹52.4 L+₹1.9 L (3.75%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹53.3 L+₹2.8 L (5.56%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹60.5 L+₹10.0 L (19.7%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
8 Feb 2023, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL BIRENDRA SINGH
GE 859 EWS
PROVN OF 15 X STREET LIGHTS FOR SECURITY LIGHTING IN 251 TRANSIT CAMP AT BN AOR TO INCL LOWER KDD AND UPPER KDD PROVN OF 7 X 25 LTRS GEYSERS WITH WATER CONNECTION ALONGWITH CERTAIN SPL REPAIR/ REPLACEMENT OF LT PANELS, BUSBAR BOXES AND SERVICE CONNE
2023_MES_574310_1
8378/E8
Open Tender
Civil Works
Item Rate
180 days
BAISAKHI
PL REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹99,000
Yes
26 Apr 2023
11 Jan 2023
9 Feb 2023
11 Jan 2023
8 Feb 2023
25 Jan 2023
Amount
Supply, installing, testing and commissioning, factory made and tested ,CPRI type tested LT feeder pillar , outdoor type floor mounted , suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber duly insulated The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15 mm CRCA MS sheet and LT panel shall bemounted on angular frame work of 50x50x5mm thick angle iron base frame, minimum 75 cm hight and fixed with PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, both side opening type, with aprons for cable entry, with double door shutter and locking arrangement and consisting of the following all as specified including taking out old feeder pillar and taking out LT cable from loop for connecting in new panel and necessary excavation etc and consisting of the following
(a) Aluminium bus bar four Nos 400 Amps each ,fixed on epoxy insulated with panel fixed horizontally, duly insulated with heat shrinkable sleeves in colour code - 04 Nos Incoming:- (b) MCCB, 04 Pole, 250 Amps with ultimate breaking capacity Icu- 35 KA at 415 volts , adjustable type with thermal and magnetic settings conforming to IEC 60947 Part-I/IS-13947 Part-I - 01 No (Ics=Icu=100%) Outgoing:- (c) MCCB, 04 Pole, 125 Amps with ultimate breaking capacity Icu- 25 KA at 415 volts , adjustable type with thermal and magnetic settings conforming to IEC 60947 Part-I/IS-13947 Part-I - 01 No (Ics=Icu=100%) (d) MCCB, 04 Pole, 100 Amps with ultimate breaking capacity Icu- 16 KA at 415 volts , adjustable type with thermal and magnetic settings conforming to IEC 60947 Part-I/IS-13947 Part-I - 02 No (Ics=Icu=100%) ,
S&F & testing commissioning of outdoor type bus bar panel pedestal type weather proof CPRI approved MS cubical panel board outdoor type of size 110 cm x 80 cm x 40 cm, 4 Nos of aluminium busbar of 300 Amp capacity & MCCB 160 Amp capacity 4 pole (Ics = Icu = 100%) including one coat of red oxide and two coat of enamel paint powder coated, mounted on channels and PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels aluminium busbar chanel insulated with colour coated heat shrinkable sleaves and mounted on DMC/Epoxy insulator all as specified & directed. The panel shall be fixed over Angle iron frame (50 x 50 mm) of minimum height 75 cm Note :- Panel drawings & make of MCCB will be submitted by contractor for approval from Accepting Officer before ordering the panel Make :- Shalabh /Maklik/Parbathi Engineers
S&F & testing commissioning of outdoor type bus bar panel pedestal type weather proof CPRI approved MS cubical panel board outdoor type of size 110 cm x 80 cm x 40 cm, 4 Nos of aluminium bus bar of 300 Amp capacity & MCCB 125 Amp capacity 4 pole (Ics = Icu = 100%) including one coat of red oxide and two coat of enamel paint powder coated, mounted on channels and PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels aluminium busbar chanel insulated with colour coated heat shrinkable sleaves and mounted on DMC/Epoxy insulator all as specified & directed. The panel shall be fixed over Angle iron frame (50 x 50 mm) of minimum height 75 cm Note :- Panel drawings & make of MCCB will be submitted by contractor for approval from Accepting Officer before ordering the panel Make :- Shalabh /Maklik/Parbathi Engineers
S&F & testing commissioning of outdoor type bus bar panel pedestal type weather proof CPRI approved MS cubical panel board outdoor type of size 110 cm x 80 cm x 40 cm, 4 Nos of aluminium bus bar of 200 Amp capacity & MCCB 100 Amp capacity 4 pole (Ics = Icu = 100%) including one coat of red oxide and two coat of enamel paint powder coated, mounted on channels and PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels aluminium busbar chanel insulated with colour coated heat shrinkable sleaves and mounted on DMC/Epoxy insulator all as specified & directed. The panel shall be fixed over Angle iron frame (50 x 50 mm) of minimum height 75 cm Note :- Panel drawings & make of MCCB will be submitted by contractor for approval from Accepting Officer before ordering the panel Make :- Shalabh /Maklik/Parbathi Engineers
S&F & testing commissioning of outdoor type bus bar panel pedestal type weather proof CPRI approved MS cubical panel board outdoor type of size 110 cm x 80 cm x 40 cm, 4 Nos of aluminium bus bar of 400 Amp capacity & MCCB 250 Amp capacity 4 pole (Ics = Icu = 100%) with provision of 3 phase energy meter CT operated having CT range 100/5 Amp including necessary MCBs for connection including one coat of red oxide and two coat of enamel paint powder coated, mounted on channels and PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels aluminium busbar chanel insulated with colour coated heat shrinkable sleaves and mounted on DMC/Epoxy insulator all as specified & directed. The panel shall be fixed over Angle iron frame (50 x 50 mm) of minimum height 75 cm Note :- Panel drawings & make of MCCB will be submitted by contractor for approval from Accepting Officer before ordering the panel Make :- Shalabh /Maklik/Parbathi Engineers
Supply, laying & testing in repalcement cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100V grade with stranded aluminium conductor of size 35 sqmm 3.5 core including taking down of old unserviceable UG cable/service wires.
Description all as per item No 8 above but of size 25 Sqmm 4 core
Description all as per item No 8 above but of size 16 Sqmm 4 core
Description all as per item No 8 above but of size 16 Sqmm 2 core
Description all as per item No 8 above but of size 10 Sqmm 2 core
Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out hard & densile soil complete all as specified and as directed.
All as per item No 13 above but depth exceeding 1.5 m and not exc 3 mtr in depth for laying of pipe/ cables/ poles etc and getting out hard & densile soil complete all as specified and as directed.
Returning filling in any type of soil including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.
Removing excavated soils to a distance n.exc. 50 mtr and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.
M & L for laying of fine, clean sand (river sand) free from sharp materials and stone particals in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shall be measured 18 cm after punning.
S&L unreinforced precast concrete cable cover, class LV, Type 1, flat, size 250mm X 150 mm X 40mm complete made with cement concrete mixx M- 20 grade all as specified and directed.
Supply and laying galvanised tube light grade ISI marked of size 40 mm dia incl all fittings in trenches/fixed on pole/wall/floor or laid in position complete all as specified and directed.
M & L for road cutting incl necessary excavation 45 cm wide and 90 cm in depth as in trenches in any type of soils/rock for laying LT UG cable through pipe after laying /through the cable trenches will be filling top with M&L PCC 1:3:6 type C-1 using 20 mm grdaeds stone aggregates from top over 15 cm thick hard good of broken boulders , 63 mm gauge over 15 cm bolders 100 mm dia over filled and rammed earth to make good the disburbed surface etc complete all as specified and directed.
M&L for replacement of new generation energy saving and environmental friendly long life LED street light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 45 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including taking down of old unserviceable street light any type/any capacity including replacement of twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from junction box to LED light throgh copper connectos all as specified and directed. Make: Havells/Bajaj/Philips
M&L of new generation energy saving and environmental friendly long life LED street light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 60 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including s&f of twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from junction box to LED light throgh copper connectos all as specified and directed. Make:- Bajaj /Havells/Philips
M&L of new generation energy saving and environmental friendly long life LED street light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 90 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including s&f of twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from junction box to LED light throgh copper connectos all as specified and directed. Make:- Bajaj /Havells/Philips
S & F in replacement of GI brackets for fixing LED street light fitting fabricated out of GI tubing 40 mm dia, medium grade, 1.2 mtr long , bend to 120 degree shape by cutting, welding and well finishing including MS clamp of flat iron of size 32 x 4 mm -02 Nos complete for steel poles / PCC pole as per site requirement with nut, bolt & washers for fixing of GI bracket complete all as specified and directed.
Supply & fixing of TPN Kit kat type rewireable switch fuse unit of 415 Volt 50 Hz three phase of capacity 63 Amp including MS box with backelite fuse fittings with HBC fuse, operating insulated handle, top cover necessary locking arrangemnts etc fixed on Wooden boards/PVC boards as directed of make -Indoasian/Havells/L&T
Supply & fixing of TPN Kit kat type rewireable switch fuse unit of 415 Volt 50 Hz three phase of capacity 32 Amp including MS box with backelite fuse fittings with HBC fuse, operating insulated handle, top cover necessary locking arrangemnts etc fixed on Wooden boards/PVC boards as directed of make -Indoasian/Havells/L&T
S&F in replacement kiosk box for luminaires ,weather proof made out of HDPE/FRP housing fire retardant, non fusing, shock & rust proof, single piece moulded and cover with hinged door, pole mounting type comprising of four pole copper connectors of 16 Amps capacitywith 6 Amp MCB single pole , of minimum size 250x200x100mm, IP 66 fixed on pole with MS, clamps 30 x 5mm with necessary nuts, washer and incl applying two coats of synthetic enamel paint over a red oxide primer on steel surface/clamps and embossing/painting of Danger sign of size not less than 10cms x 7.5cms with letter and conventional skull and bones in single red color on front face of kiosk box complete all as directed. Make :- SIntex/Hensal/Supreme
Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP-31) 9.0 mtr long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with two coats of aluminium paint over one coat of red oxide primer and painting alternate strips of balck and white colours 30 cms each 05 Nos strips from ground level complete all as specified and directed. (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed.) Note :- Excavation incl earth work and PCC foundation will be measured and paid separately. Make -National Tubing company / kwality Steel Kolkata / Calctta Poles / bansal Poles / Jindal Poles.
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.
M&L PCC in mix 1:4:8 type D2 with 40 mm graded aggregate for poles / stays foundation and fitting in mass concrete
M&L for PCC 1:3:6 Type C2 for erection of pole in base with 40 mm gradede coarse agreegete complete all as specified and as directed.
M&L for PCC 1:2:4 Type B1 using 20mm graded crushed stone aggregate as in coping etc including necessary from work complete all as specified and as directed.
S&F storage type water heater (Geyser), AC , 230 Volt, 50 Hz , capacity 25 Ltrs, 5-star rating comprising copper inner tank, heatng element, thermostate with adjustable temperature setting 0-90 degree centigrade , indication lamps , provision of inlet outlet and air vent connections & NRV and PVC connection 15 mm size, heavy duty with brass nuts, 450 mm long mounteted on wall including all fixing arrangements such as deshfastner ,bolts, nuts & washers etc complete including making good disturbed wall of surfaces matching with the existing finishing etc complete and as directed Make - Havells /Bajaj / Recold
M&L for Point wiring for one socket outlet 15 Amp on independent board with 4 sq mm (nominal area), PVC insulated unsheathed (HRFR), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (HRFR)single core multi-stranded copper conductor cable of size 2.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. Make : Havells/Anchor/Finolex/Richa
Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed.
S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type
S&F sheet metal enclusure for DBs when MCBs to be used single pole and neutral 2 way with 200 Amps rated bus bar, 240 volts fixed sunk / flush to the wall or in niche complete all as specified and directed.
Supply and fixing SPN 32 amp, 240V 10KA 'C' curve MCB complete with testing and commisioning
M&L for Galvanised steel tubes, medium grade for hot & cold water supply of 15mm dia including cutting of existing pipe & insertion of Tees all random fittings fixed complete to walls, ceilings or in floors etc & testing after laying up to entire satisfaction of engr-in charge all as specified & as directed by engr-in-charge. Make :- TATA/Jindal/BST
S&F Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of size 15 mm. Make :- Jindal/Prayag/Sant
S&F Bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified & as directed by engr-in-charge.Make :- Jindal/ Prayag/ Sant
M & L for PVC connections 15mm size with PTMT nuts of length 450mm for hot and cold water connection complete
Supply and laying sub main wiring two single core 6 sq mm stranded copper conductorof red & Black colour including 4 sq mm green colour stranded copper conductor as earth continuity conductor connected to common earth dolly including PVC casing n caping of suitable size for accomadating the wires Complete
Supplying and fixing 1100 volt grade heavy duty cable PVC insulated aluminium conductor served with inner sheathed of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4 mm suspension wire, one twin core cable flat or circular multistranded 6 sqmm complete all as specified and directed
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil.
Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in soft/loose soil.
M&L for plain cement concrete 75mm thick type C-1, 1:3:6, (40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement.
M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, using broken stone or boulders, watered and rammed to a true surface.
M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete.
M&L rendering 15mm thick in CM 1:6 on concrete inner surfaces finished even and smooth without using extra cement .
M&L rendering 15mm thick in CM 1:4 on concrete outer surfaces finished even and smooth without using extra cement .
M&L for Prepairing surfaces plastered or unplastered newly surfaces with three coats of white wash as completed.
M & L for 350 x 250 x7 mm or 450x350x7mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany). Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.
M&L for joint free Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding .18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade incl 15mm thick screed bed in CM 1:6 complete all as specified and directed. (Make; Kajaria/ Orient Bell/ Johnson/ Somany). Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.
M&L for clean sawn Second class hard-wood timber framed and fixed in scantlings complete all as specified and directed.
M&L for 4mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work for ceiling work.
M&L for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.
M&L for preparation of new or previously untreated surfaceof wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for window, ventilators etc are provided with stiles and rails as specified in SSR Part-1, section 8 clause 8.24(b).
S&F 100mm size Butt hinges, medium weight cold rolled mild steel complete all as specified.
S&F 150mm long aluminium anodized, barrel tower bolts extruded section.
S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised. handle fabricated type.
S & F Aluminium alloy, anodised,300mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
Supply only sheet glass 3mm thick glass pin head type and glazing with putty/ beads n. exc 0.5 Sqm each pane.
Supply only Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.
M&L for applying two coats of synthetic enamel paint over one coat of red oxide primer incl preparation of new steel surface of any description.
S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including CI brackets, waste pipe and 32mm PTMT waste coupling complete all as specified and directed(Make: Hindware/Parry)
S & F fancy typy chromium plated 15mm dia pillar taps fancy type copper alloy with capstan heads, screwed down high pressure, with or without lettered "hot or cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed.
S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches or floors.
M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channel, bed of drain incl form work/moulds complete all as specified and directed
M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc.
S&F PVC (SWR) bends any radius 110mm dia.
S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches or floors..
S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints laid in trenches or floors..
S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.
S&F in 16mm bore 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.
S&F in 25mm bore 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc.
S&F PVC connection of 15 mm size with PTMT nuts of length 450 mm long.
S & F Vitreous China squatting pan, "Orissa" pattern, size 630 x450 mm white, with integral foot rest (excluding flusing cistern and flush pipe) incl connection to trap and flushing pipe anti syphonage pipe etc complete all as specified and directed.
S & F 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets complete.
S & F CP Fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified
S & F fancy type chromium plated 15mm dia stop valve , cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified .
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified .
M&L for providing reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
M&L for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in man hole cover incl necessary form work.
Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.
ditto but 5mm dia and over upto and inc 10mm dia in stirrups, spacers and binders etc.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc.
S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified
S&F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified (Make:Jindal/Leader/Scico).
S&F Gun metal 20mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.
M/S P K ENTERPRISES
PIONEER TRADERS
BROKPA CONSTRUCTION
M/S SM ANSARI
M/S ASHOK CONSTRUCTION
M/S YOGENDRA CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .