REPAIRS WOODEN ALUMINIUM STEEL JOINERY UNDER C2A AND C2B AREA AND REPAIR MAINT OF INTERNAL ELECTRIFICATION INCLUDING MCB DBS BLDG STREET LIGHT AND CONNECTED WORKS UNDER GE EAST MATHURA

Amount

M&L for preparation of old decorative surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old plastered and unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surface of ceiling and applying one coat of white wash all as specified and directed by Engineer in charge.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old surfaces of walls and applying two coat of distemper oil emulsion paint complete all as specified and as directed.

Taking down Cement plaster from brick wall/ceilling etc incl racking out joint & hacking out for key and scrubbing down with water complete all as specified and as directed.

M&L for Rendering 10mm thick on fair faces of brick/concrete surfaces of in CM 1:6 complete all as specified and as directed.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sqm each complete all as specified and as directed.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc. 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.0sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0sqm and not exceeding 2.0sqm each complete all as specified and as directed.

S&F Pressed steel frames of size 125x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified and as directed.

S&F Pressed steel frames of size 105x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified and as directed.

M&L for cement concrete 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) as in filling of pressed steel frame complete all as specified and as directed.

Cutting holes in existing wall or PCC Block masonry built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of holdfast or lugs measured from the face of jamb into the wall exceeding half brick but not exceeding one brick complete all as specified and as directed.

S&F 35 mm thick factory made flush shutters, solid core construction with block board core and plywood face panel veneer type on both side complete all as specified and as directed.

S&F 35 mm thick factory made glazed and skeleton shutters of 2nd class HW, open rebated and prepared to receive glass/gauze etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR pt-1 section 8.20 (a) complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F to the frame at site, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be coverd with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed in the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawingd in cement mortar 1:4 complete all as specified and as directed.

S&F factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and as directed.

S&F 200 mm size aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 150 mm long aluminium anodised handles, cast type complete all as specified and as directed.

S&F 100 mm long mild steel Butt hinges, medium weight, cold rolled complete all as specified and as directed.

S&F 125 mm long extruded aluminium alloy Butt hinges with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body anodised overall length of cover plate 150mm with hard drawn steel spring, fixed in floor complete all as specfied and as directed.

S&F 5.5 mm thick sheet glass, ordinary quality and fixed to aluminium frame in square exc. 0.5 square metre in each pane including necessary fixing beads etc complete all as specified and as directed.

S&F in repair Sheet glass 5.5mm thick, tinted glass and glazing in square exc 0.5 sqm in each pane encluding necessary fixing beads etc. complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spicified and as directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed.

S&F MS Framed work such as grills gratings, door and cooler stand, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars confirming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F steel window (any Nos of shutters) with side hung double shutters one receive gauge including projecting type hinges with steel handle, and steel peg stay complete including with MS grill of 12mm dia bar and glazing bars/without glazing bars with a shop coat of red oxide primer shown on drawing No 625 sheet No 1/1 complete all as specified and as directed.

Dismandling of mild steel work of any description not other wise provided for complete all as specified and as directed.

S&F in repair 4mm thick sheet glass ordinary quality exc 0.50Sqm each pane including necessary cleats, glazing clips rubber packing, anodised aluminium snap beading, screws fixed in aluminium windows compete all as specified and as directed.

S & F in repairs 3 mm thick pin headed/figured/frosted glass ordinary quality and glazing with oil putty/wooden beading in square n.exc. 0.5 sqm in each pane complete all as specified and as directed.

M&L for repairing steel windows and ventilators hinges, brackets, steel handle, etc by spot welding at site complete all as directed.

S&F in repairs 100 mm long MS Butt hinges cold rolled mild steel meadium weight fixed to MS pressed steel chowkhats including necessary welding and making good of damaged portion etc complete all as specified and as directed.

S&F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as sepcified and as directed.

S&F 18mm thick PVC Celuka ply one side prelaminated with decorative lamination, and other side plain white colour to make kitchen cabinet/drawer shutters etc complete all as specified and as directed. Make :- RAJSHRI PLASTIWOOD LTD/SINTEX INDUSRIES LTD/DURGA PLAST EXTRUSION

S&F 12mm thick PVC Celuka ply both side plain white colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per specified and as directed. Make :- RAJSHRI PLASTIWOOD LTD/SINTEX INDUSRIES LTD/DURGA PLAST EXTRUSION Note for item No 41, 42 & 43:-Submission of Test Certificate is mandatory.

S&F 18mm thick factory made Rajshri PVC shelf/ partition of required size consisting of panel of celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size18mm x 18mm as per required length the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm width x 1mm thick PVC sheet of density 600 kg/cum complete all as specified and as direction.

S&F Magnatic catcher (KTS-20) full extension load capacity 8 kgs complete all as specified and as directed. Make : KAFF/Godrej/Hettich.

S&F 100 mm stainless steel handles for kitchen cabinet shutters, cast type polished bright complete all as specified and as directed. Make : KAFF/Godrej/Hettich.

S&F 150mm long extruded stainless steel handles for cupboard shutters, cast type polished bright complete all as specified and as diected. Make : KAFF/Godrej/Hettich.

S&F auto closing hinges 35 mm of 0 crank( KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as diected. Make : KAFF/Godrej/Hettich.

S&F 150 mm size stainless steel Tower bolt for kitchen cabinet shutters complete all as directed and as directed. Make : KAFF/Godrej/Hettich.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps 40mm (When open) complete all as specified and as directed.

S&F stainless steel 304 grade kitchen modular baskets for storage of plates, cups, grain basket, glass cutlery, bottles etc as per required size complete all as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L for providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint complete all as specified and as directed.

M&L for 4 mm thick designer non-asbestos fibre cement building board having fire resistance & moisture resistance properties fixed to aluminium grid with screw complete all as specified and as directed. Make : Everest/Charminar/Uppal

S&F PVC Wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on pvc frame as per specifications and drawing complete all as specified and as directed..

S&F 5mm thick PVC Sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

Taking down aluminium door shutter any size dismantiling stiles and rails refixing the same using same materials including glass sheet and partical board sheet with replacement of 6mm dia GI full screw to full width of shutter bolts 2 Nos one at each top and bottom with necessary cleats using screws and nuts etc. complete all as specified and as directed.

S&F in reapirs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Dismantling of AC corrugated sheets in roof covering including ridges, hips, valleys etc complete all as specified and as directed.

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L Pre- painted galvalume aluminium zinc coating GI based steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutters, fixed with self tapping screw complete all as specified and as directed.

M&L for 12 mm thick plain/Frosted tuffened end glass on opening and shelves/Partition including cutting and grooving on wall with or without aluminium frame, rail, handle lock etc including floor machine roller complete all as specified and as directed.

Taking down of old aluminium shutter of any description exc 1.50 Sqm n exec 4 Sqm each and re-securing after repair locking arrangement, floor spring, bottom and top pivot adjusting complete all as specified and as directed.

Taking down old aluminium shutter of any description n'exc 1.50 Sqm each and re-securing after repair locking arrangement, bottom, top and side rail adjusting complete all as specified and as directed.

Taking down 12mm thick toughen glass of size exc 1.5 Sqm but n'exc 4 Sqm each for repairing of hardware fittings such as Handle, Lock, floor spring, bottom &Top pivot, etc and refixing in same opening all as directed by Engineering-in-Charge.

S&F in repair 100 mm size mortice lock of brass, vertical type,4 levers, complete all as specified and as directed.

S&F for Aluminium frame powdercoated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc including aluminium grill of design/size as approved by Engineer-in-Charge complete all as specified and as directed.

M&L for 5 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specidfied and as directed.

M&L Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

M&L for 75mm powder coated aluminium barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc all as specified below complete all as specified and as directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370). Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B.

S&F aluminium partition wall of section as in frame /single double grove of size 63.5 x 38.1 x 2mm thick including 5 mm thick tinted glass, 20 mm thick pre-laminated particle board with all necessary fittings. Vertical section has to be supported with angle of size 65 x 65 x 6 mm thick including making good of existing surface complete all as specified and as directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in position complete all as specified and as directed. Make : Godraj / Sandhu / Everest

S&F 100mm Mortice lock vertical type of mild steel 4 levers complete all as specified and as directed. Make : Godrej/Ozone/Harrison.

Taking down 12 mm thick toughen glass door shutter area exc 2 Sqm but n.exc 4 Sqm each, adjustment, greasing & oiling of floor door spring refixing the door in same opening and making the door for smooth function complete all as specified and as directed.

S&F in repair stainless steel lock fixed to toughen glass door shutter, horizontal type, 4 levers, complete all as specified and as directed. Make : Godrej/Ozone/Harrison.

S&F in repair 25 mm dia stainless steel alloy tubular drapery rod cut to size and fixed in position including fixing brackets,stops end caps etc. complete all as specified and as directed.

Dismantling PVC celuka ply any thickness or insulation board including all fittings as in kitchen cabinet complete all as speified and as directed.

Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fitting etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed. Note: Credit for above items should be made as per credit Schedule separately.

Taking down carefully Submain wiring of any type size complete and making good disturbed sufaces to match with the existing surfaces complete all as specified and as directed.

Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap including MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and as directed.

M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia medium grade) and its all accessories complete concealed in wall incl cutting & chases(making good all to the disturbed surfaces as per existing) and provision of modular flush metal boxes including cover plate with frame for mounting modular switches, sockets, regulators etc including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified and as described for the following:- Make : Havells/Polycab/Finolex/RR Kable/Plaza

One light/ fan point controlled by one way switch 5 amp complete all as specified and as directed.

One 3 pin 5 Amps socket point controlled by one way switch on same board with other switches complete all as specified and as directed.

One 3 pin 5 Amps socket point controlled by one way switch on independent board complete all as specified and as directed.

One bell point controlled by one push button on independent board complete all as specified and as directed.

One light point controlled by two 2-way switches.

All as per item Serial No. 80 but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .

All as per item Serial No. 80 here-in-above but for 20 Amps of AC enclosure independent, with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

Supply and Fixing Modular bell Push switch 6 Amps with indicator single pole one-way, 1 Module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

Supply and Fixing Modular switch 16 Amp single pole one way,1 Module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

Supply & Fixing Modular fan Regulator electronic step type complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps, combined 2 Module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

Supply and Fixing switch piano type , SP, one way, flush type 5 Amps complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

Supply and Fixing socket out let 2 in 1 flush type 5 pin 5 Amp complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

Supply and Fixing socket out let 2 in 1 flush type 3 pin 5 & 15 Amp complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

Supply and Fixing switch piano flush type 15 Amp, SP, 240 volt, one way complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

Supply and Fixing bell push siwtch piano flush type, SP, one way, 5 Amps complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

Supply and fixing lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

Supply and fixing Bell Multi Music type, 230 Volts including connection complete all as specified and as directed. Make : Havells/Orient/Bajaj/CG/Philips

Supply and fixing Bell Ding dong type, 230 Volts including connection complete all as specified and as directed. Make : Havells/Orient/Bajaj/CG/Philips

Supply and fixing stepped type electronic fan ragulator flush type on the exiting phenolic laminated sheet complete all as specified and as directed. Make : Havells/Orient/Bajaj/CG/Philips

Supply & fixing for Sub Main Wiring wiring with two runs single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 4 Sqmm copper green colour earth wire complete all as specified and as directed. Make : Havells/RR Kable/Polycab/Glaster Note : Two runs of 4 Sq mm (P&N), one run of 4 Sq mm earth wire & One run of PVC casing and caping will be measured as one RM.

Supply & fixing for Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 6 Sqmm copper green colour earth wire complete all as specified and as directed. Make : Havells/RR Kable/Polycab/Glaster Note : Two runs 6 Sq mm (P&N), one run of 6 Sq mm earth wire & One run of PVC conduit will measured as one RM.

Supply & fixing for Sub Main Wiring with two runs single core 10 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases (making good all to the disturbed surfaces as per existing) with and including 10 Sqmm copper green colour earth wire complete all as specified and as directed. Note: Two runs 10 Sq mm (P&N), one run of 10 Sq mm earth wire & One run of PVC conduit will measured as one RM.

Supply & fixing indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and and directed. Make : Havells/CG/Philips/Wipro/Syska

Supply & fixing indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1X9 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K,>100Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

S&F in replacement LED Bulk Head with PDC aluminium housing and milky diffuser capacity 10 Watt complete with all accessories and connection complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply & fixing LED Decorative bed side light fitting 3W complete with all accessories, On /off inbuilt switch and including connection complete all as specified and as directed. Make : Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply & fixing indoor wall mounted fitting with LED retrofit bulb of capacity 09 watts complete all as directed. Make: Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply and install of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified and as directed. Make : Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply & fix in repair recess type, 36 watt LED panel light (600x600 mm) complete with fittings integrated electronic driver,energy efficient, 230 volts,co- related colour temperature (CCT) of 6500K, natural white complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply and fix LED 9W, suitable for E27 type holder, warm white/ cool white/natural white complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

S&F LED Round/square surface mounted downlighter 12 watt, 6500K, integrated electronic driver,natural white complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

S&F LED Round/square recess mounted slim downlighter 12 watt, 6500K, integrated electronic driver, natural white complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

S&F LED Round/square recess mounted slim downlighter 18 watt, 6500K, integrated electronic driver, natural white complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

M&L for building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer including taking down old unserviceable bracket as scrap any size/description complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

S&F MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

S&F MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj.

S&F MCB distribution board, SPN 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

S&F MCB distribution board, SPN 2 Way, single door, sheet steel, phosphatised, powder painted with bus-bar 100Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply & fix MCB SPN 63 Amps,' C' series , bracking cap10KA, 240V complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply & fix in replacement of MCB SPN 40 Amps,' C' series, breacking cap 10KA, 240V complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply & fix in replacement of MCB SPN 6-32 Amps,' C' series, breacking capacity 10KA, 240V complete all as specified and as directed. Make : Havells/CG/Philips/Wipro/Syska/Bajaj

Supply & fixing in replacement of MCB SP 6 - 32 Amps, ' C' series ,bracking cap 10KA, 240V complete all as specified and as directed. Make : Havells/Legrand/L&T/Siemens/Schnieder

Supply and fix SP enclosure with a two pin and earth plug and socket complete with SP MCB of rating 20 Amps, 240 Volts with all connection complete all as specified and as directed. Make : Havells/Legrand /L&T/Siemens/Schnieder

Taking down the ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearings, reassembling the fan and blades, painting of fans with synthetic enamel paint by spraying including filling cavities with filler, writing MES No. in paint, hanging/fixing the fan in its original position and testing on completion complete all as specified and as directed. Note: The spare parts (like as bearing, capacitor, rubber wheel bush, fan winding etc) required shall be measured and paid separately under relevant items as supply only.

All as per item Serial No. 124 here-in-before but exhaust fans of any sweep.

Supply only ball bearing/bush etc as per existing & suitable for ceiling fan/exhaust fan complete all as specified and as directed.

Material & labour for removing the defective fan winding of ceiling fan size upto 1200mm/1400 mm sweep and rewinding with super enamelled copper wire of existing gauge, applying insulation varnish, soldering, pre heating and binding with empire tubes, crimple sheet etc. as required for rewinding complete all as specified and as directed.

Material & labour for removing the defective exhaust fan winding of size upto 450 mm sweep and rewinding with super enamelled copper wire of existing gauge, applying insulation varnish, soldering, pre heating and binding with empire tubes, crimple sheet etc. as required for rewinding complete all as specified and as directed.

Supply only rubber wheel bush with GI bolt, nut and split pin complete all as specified and as directed.

supply only capacitor 2.5 to 3.5 MFD suitable for ceiling fan/exhaust fan complete all as specified and as directed.

S&F Plastic Surface mounting box 1/2 module gang box for mounting switches, sockets, fan regulator etc complete all as specified and as directed.

S&F Plastic Surface mounting box 3/4 module gang box for mounting switches, sockets, fan regulator etc complete all as specified and as directed.

S&F Plastic Surface mounting box 6/8 module gang box for mounting switches, sockets, fan regulator etc complete all as specified and as directed.

Supply & replacement of 3 mm thick laminated mica sheet top cover suitable for switch board 3 way to 6 way including removing & re-fixing of existing switch/socket and complete connection all as directed. Make : Hylam/Sunmica/Anchor/Greenlam. Note :- Replacement of unserviceable switch / socket / regulator shall be measured & Paid separately under relevent item of Sch -A

Supply & replacement of 3 mm thick laminated mica sheet top cover suitable for switch board 8 way to 12 way including removing & re-fixing of existing switch/ socket and connection complete all as specified and as directed. Make :Hylam/Sunmica/Green lam/Anchor Note :- Replacement of unserviceable switch/socket/ regulator shall be measured & Paid separately under relevent item of Sch -A

M&L for Modular metal flush box 1/2 Module incl cutting & chases (making good all to the disturbed surfaces as per existing) complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

M&L for Modular metal flush box 3 Module incl cutting & chases (making good all to the disturbed surfaces as per existing) complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

M&L for Modular metal flush box 4 Module incl cutting & chases (making good all to the disturbed surfaces as per existing) complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

M&L for Modular metal flush box 6 Module incl cutting & chases (making good all to the disturbed surfaces as per existing) complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

M&L for Modular metal flush box 8 Module incl cutting & chases (making good all to the disturbed surfaces as per existing) complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

M&L for Modular metal flush box 12 Module incl cutting & chases (making good all to the disturbed surfaces as per existing) complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

M&L for modular white cover plate with frame, 1/2 module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

M&L for modular white cover plate with frame, 3 module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

M&L for modular white cover plate with frame, 4 module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

M&L for modular white cover plate with frame, 6 module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

M&L for modular white cover plate with frame, 8 module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

M&L for modular white cover plate with frame, 12 module complete all as specified and as directed. Make : Havells/Anchor(Roma)/Legrand/Honeywell/ Polycab/Crabtree

Supply and fix of 70W LED highbay light fitting with wide beam optics & driver, PDC housing, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 protection, suitable for ceiling mount (surface/suspended) including all connections and fixtures complete all as specified and as directed. Make : Havells/Syska/CG/Bajaj/Philips/Wipro

M&L for point wiring with 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including PVC Casing and Caping and its all accessories of suitable size on wall/roof surfaces ( making good all to the disturbed surfaces as per existing) including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing including gang box / 2.0mm thick MS terminal box as per site requirement for fixing switches, sockets, fan regulators etc fixed to wall with 3mm thick laminated sheet top cover complete all as specified and as directed for:- Make of cable : Havells/Polycab/RR Kable/Plaza/ Finolex/Gloster

One light point/ fan point / bell point controlled by one switch.

One 3 pin 5 Amps socket point controlled by one way switch on same board.

One 3 pin 5 Amps socket point controlled by one switch on independent board.

All as per item No. 149 here-in-before but with 4.0 Sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and as directed.

Taking down carefully service connection of any type complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables and getting out complete all as specified and as directed.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested complete all as specified and as directed.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches/duct/fixing on walls/poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole/Main Panel Box and testing complete all as specified and as directed of following sizes :- Make : Havells/Polycab/ICC/Gloster/RR Kable. Note: HDPE pipe rate shall deemed be included in quoted unit rate of above item(s).

10 sqmm 4 core

16 sqmm 2 core

16 sqmm 4 core

25 sqmm 4 core

Supply & fixing powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted, triple pole and neutral 4 way with 100 Amps rated copper bus bar, type complete all as specified and as directed. Make : Havells/L&T/Legrand/Schenider

S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 4 way complete all as specified including fitting suitable for MCBs with connections complete all as specified and as directed. Make : Havells/L&T/Legrand/Simens/Schenider. Note : -MCB & MCB /MCCB DBs shall be of same make and measured and paid seperately under respective items of Sch A. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.

Supply & fix in replacement of MCCB 125 Amps,' C' series, breacking capacity16 KA, 4 Pole, 415V complete all as specified and as directed. Make : Havells/L&T/Legrand/Simens/Schenider.

Supply & fix in replacement of MCCB 100 Amps,' C' series, breacking capacity 16KA, 4 Pole, 415V complete all as specified and as directed. Make : Havells/L&T/Legrand/Simens/Schenider.

S&F LED post top light fitting 30W IP-65 rated completeall as specified and as directed. Make : Havells/Syska/Bajaj/Philips/CG

S&F LED bollard light fitting 10W IP-65 rated complete all as specified and as directed. Make : Havells/Syska/Bajaj/Philips/CG

M & L for 3 core copper conductor 0.75 sqmm conductor area, PVC insulated, PVC round sheathed multicore, 1100 volt, including with use of PVC pipe / Casing -Caping as per site requirement including taking down old u/s wire complete all as specified and as directed. Make : Havells/Syska/Bajaj/Philips/CG

M & L for 3 core copper conductor 2.5 sqmm conductor area, PVC insulated, PVC round sheathed multicore, 1100 volt, including with use of PVC pipe / Casing -Caping as per site requirement including taking down old u/s wire complete all as specified and as directed. Make : Havells/Syska/Bajaj/Philips/CG

Earthing complete all shown as electrical plate No -03 of MES Sch part -I as specified and as directed including the following:- (i) GI earth plate of size 60x 60cm x6.0mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.50 metres below ground level. (ii) Earth plate surrounded by and packed with charcoal and common salt in alternative layers. ( n.exc 15 cms each layer) (iii) 4 mm GI wire from earth plate to MCB DB/machinery including necessary GI bolts, nuts check , washers, thimbles etc. (iv) 20 mm bore, light grade, Gi pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontaly to the earth pit. (v) 15 mm dia bore G. I. medium grade pipe for protection of earth wire. (vi) Cement concrete chamber of PCC (1:3:6) type C-2 using 40mm graded stone aggregate. The chamber shall be constructed one metre away from edge of earth pit. (vii) 50 mm thick precast cover of reinforced cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate with steel rainforcement 8 mm dia mild steel TMT bar @ 10 Cm c/c both ways and MS angle iron 50x50x6mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces with suitable handle to lift the cover. (viii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance of 50 m as directed.

shyam construction

Ms Kamal Kant Agarwal

B S ENTERPRISES

BHARDWAJ CONSTRUCTIONS