Repair to joinery, flooring, plastering, internal water supply and connected E/M items for OTM accn including MES IB at Bharatpur Mil Stn

Amount

Taking down chowkats or frames n. exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutter of any description area n exc 1 sq. m each complete all as specified and as directed.

Taking down shutter of any description area exc 1 sq. m and n. exc 2 sq. m each complete all as specified and as directed.

Taking down shutter of any description area exc 2.0 sq. m each complete all as specified and as directed.

S&F 30 mm thick Flush Shutters, Solid core construction, Single or double leaved rebating shall be square or splayed, with block board core and both face is covered with plywood face panels commercial type free from twist or wrap in plane, complete all as specified and directed

S&F factory made, 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc.diveded in squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc., sizes of members of shutters as specified in clause 8.24(a) SSR Part I complete all as specified and as directed.

S&F factory made, 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc.( without sash bars ), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc., sizes of members of shutters as specified 8.24(a) in SSR Part I complete as as specified and as directed.

S & F Solid PVC Door Frame of the size 50 x 47 mm made out of 5 mm PVC sheet. The door profiles are to be reinforced with 19x19mm M.S Square tube. The profile shall be cut and mitred at two corners and joined by inserting 2nos. of 150mm long brackets of 15x15mm M.S. square tube inside the 19mm x 19mm M.S. square tube and suitably screwed complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified & shown on SSR 2020 (Part-II) complete all as specified and as directed.

S & F Mild Steel framed work as in doors or gates of angle or other section, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging with and including either hooks and hinges or steel hanging door fittings, also fastening and fixing of Fe 290(Gde-E-165) complete all as specified and as directed.

S&F 1.00 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets or welded and fixed to steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning upmitred angles etc as required complete all as specified and as directed.

S&F MS butt hinges heavy weight cold rolled of size 125 mm, complete all as specified and as directed.

S&F MS butt hinges medium weight cold rolled of size 100 mm, complete all as specified and as directed.

S&F MS butt hinges medium weight cold rolled of size 75 mm, complete all as specified and as directed.

S&F aluminium anodised,barrel tower bolts of extruded section, 200 mm length of bolt and fixed with screws, complete all as specified and as directed.

S&F aluminium anodised, barrel tower bolts of extruded section, 125 mm length of bolt and fixed with screws, complete all as specified and as directed.

S&F 250 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete as as specified and as directed.

S&F Aluminium handles, cast type, anodised of 150 mm size complete all as specified and as directed.

S&F Aluminium handles, cast type, anodised of 125 mm size complete all as specified and as directed.

M&L for Painting to new or prevously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chrome primer including preparation of surfaces complete all as specified and as directed.

M&L for Painting to new or prevously untreated steel surfaces of any description n exc10 cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chrome primer including preparation of surfaces complete all as specified and as directed.

M&L for preparation of new or prevously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Labour only for Resecuring without taking down chowkat or frame n exc. 1.50 sqm each with shutters (without taking of shutters from the frames) complete all as specified and as directed.

Ditto - all as item No 24 above but exc. 1.50 sqm & n.exc. 4.00 sqm each complete all as specified and as directed.

Labour only for Re-securing or easing and adjusting, without taking down door Shutter of any description n exc 1 sq. m each complete all as specified and as directed.

Ditto - all as item No 26 above but exc. 1.0 sq. m & n.exc. 2.00 sqm each complete all as specified and as directed.

Ditto - all as item No 26 above but exc. 2.00 sqm each complete all as specified and as directed.

Labour only for taking down door shutter of any description n exc 1 sq. m each and refixing in the same opening after necessary repair required for smooth functioning complete all as specified and as directed.

Ditto - all as item No 29 above but exc. 1.0 sq. m & n.exc. 2.00 sqm each complete all as specified and as directed.

Ditto - all as item No 29 above but exc. 2.00 sqm each complete all as specified and as directed.

S&F in repair 2nd class HW small fittings such as brackets of any type, shaped door and window stops and the like n.exc 200 Cu. cm each complete all as specified and as directed.

S&F in repair for aluminium anodised,barrel tower bolts of extruded section, 200 mm length of bolt and fixed with screws, complete all as specified and as directed.

S&F in repair for aluminium anodised,barrel tower bolts of extruded section, 125 mm length of bolt and fixed with screws, complete all as specified and as directed.

S&F in repair for brass barrel tower boltsof 200 mm size, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and as directed.

S&F in repair aluminium alloy , anodised, 250 mm size sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F in repair mild steel sliding door bolts of 250 mm size, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and as directed.

S&F in repair brass, sliding door bolt of 250 mm size, with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and as directed.

S&F in repair for Aluminium handles, cast type, anodised of 150 mm size, complete all as specified and as directed.

S&F in repair MS butt hinges medium weight cold rolled of size 100 mm, complete all as specified and as directed.

S&F in repair MS butt hinges medium weight cold rolled of size 75 mm, complete all as specified and as directed.

S & F in repair for floor door stopper of 150 mm size, aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and as directed.

M&L for electric running welding in repairs, thickness n exc 6 mm of metal to be welded, without taking down articles complete all as specified and as directed

M&L for electric welding in repair n. exc 2.5 cm in length, thickness exc 6 mm but n. exc 9 mm of metal to be welded, without taking down articles complete all as specified and as directed

Supply only 100 mm Mild Steel Medium weight Colled Rolled Butt Hinges complete all as specified and as directed.

Supply only 75 mm Mild Steel Medium weight Colled Rolled Butt Hinges complete all as specified and as directed. Note: Labour for fixing of items 29,30,45 & 46 shall be deemed to be included in quoted rate.

S&F in repair for decorated curtain rod, 25 mm dia and 1.0 mm wall thick, anodised aluminium alloy fixed with fancy type brackets, stops etc., complete all as specified and as directed.

S&F in replacement factory made steel windows with side hung shutters including box type hinges with steel handle of MS flat 25 x 5 mm and 2 Nos 100 mm long steel tower bolts fixed to shutter complete with and including glazing bars, dovetailed or welded, complete all as specified and as directed.

Ditto --- all as per item No 48 here in above but Without Glazing bar, complete all as specified and as directed.

S & F in replacement factory made Steel ventilator, ISI marked, with top hung shutters including hinges and steel peg stay complete including making good disturbed surfaces of walls, complete all as specified. Note: for srl item No 48 to 50 here-in-above : (a) Steel windows/ventilator shall be of sizes to suit the size of opening at site and as ordered/directed by GE. (b) Steel windows /ventilator shall be factory made and shall be procured from one of the manufacturers as per Appendix ‘B’. (c) Steel windows/ventilator shall be conforming to IS-1038 and all as specified in these tender documents and MES Schedule Part-I. (d). The lugs of the steel windows/ventilator shall be fixed in P.C.C. blocks made of PCC 1:3:6 type C-1 using 20mm graded stone aggregate. Size of PCC blocks shall be 23 cm x 10 cm x 15 cm. (e) Cost of providing all the above aspects including the cost of lugs & P.C.C. blocks shall be deemed to be included in unit rate quoted for above items. Cost of making good the jambs to match with the adjoining surfaces shall be deemed to be included in the rates quoted.

S & F window guard bars, plain and fixed independently in steel window frames, conforming to Fe 290 Gde E-165, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or from metal frame or stone or concrete or bricks surrounds glazed with putty, taking out old pins punching or drilling out, complete all as specified and as directed.

S & F Sheet glass 4.0 mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane including punching or drilling out old glazing pins/spring clips, and providing & fixing new ones complete all as specified and as directed.

S&F 3.0 mm thick figured glass ordinary quality and glazing with oil putty n.exc 0.5 Sqm each pane, complete all as specified and as directed.

S&F 4.8 mm thick sheet glass odinary quality and glazing with neoprene beading, complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples or rivets, complete all as specified and as directed.

Ditto--- all as per srl Item No. 56 here in above, but fixed in repair, complete all as specified and as directed

Repairing of existing aluminium door single leaf exc 1.00 sq.m but nexc 2.0 sq. m including oiling and greasing of floor springs and making the door and shutter serviceable complete all as specified and directed. Note: Floor door springs where renewed shall be measured and paid separately under appropriate items.

Repairing of existing aluminium door single leaf exc 1.00 sq.m but n exc 2.0 sq. m including taking down all members, sheet glass of any thickness, aluminium cleat, neoprene rubber beading and resecuring all sections & tightening all joints including fixing new small cleats etc each n exc 100 mm and refixing all members, sheet glass, aluminum cleat, neosprene rubber beading and making the door and shutter serviceable, complete all as specified and directed. Note: Floor door spring, Neoprene rubber beading , Hinges, Door Closer where renewed shall be measured and paid under appropriate items.

Repairing of existing aluminium frame n exc 1.50 sq. m including taking down & resecuring all member of frame of any shape & size with aluminium cleat or straight pieces n exc 75 mm each , resecuring complete frame to opening with required size of PVC plug and screw not less than 100 mm complete all as specified and directed.

Ditto -- all as above Item No. 60 but exc 1.50 sq. m and n exc 4.0 sq.m each complete all as specified and directed.

Supply only neoprene rubber beading suitable for aluminium door / window panels, complete all as specified and directed.

Supply only aluminium alloy hinges 100 mm size, complete all as specified and directed.

Supply only 150 mm size aluminium alloy handle, complete all as specified and directed.

S&F in repair for EPDM rubber strip of width 2.0 cm suitable for 1.0 mm to 2.0 mm gap , fixed with adhesive like fevicol pasting alongwith blue tag type nails complete all as specified and as directed.

S&F in repair for aluminium door seal of overall size 42 mm having nylon brush of 20 mm fixed on aluminium body strip of 22 mm, fixed with screw on Aluminium door, wooden shutters or PVC shutters, complete all as specified and as directed.

S&F in repair for rubber door seal with nylon brush of overall size 35 mm fixed with screw on wooden or PVC shutters, complete all as specified and as directed.

S&F in repair Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 2 , universal type , suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and as directed.

S&F for Aluminium ( extruded section ) body door closer hudraulically operated regulated, designation No.1 universal type, suitable for door shutter of width upto 700 mm, and of wt not more than 35 Kg each complete all as specified and as directed.

S&F in repair for 100 mm size mild steel 4 lever mortice lock vertical type, complete all as specified and as directed.

S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge, anodised with hard drawn steel spring, complete all as specified and as directed

S&F in repair for 12 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed complete all as specified and directed.

S&F in repair for Continous piano Hinge of flap width 40 mm when open, Mild Steel, bright finish or electro-galvanised complete all as specified and directed.

M & L for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including aluminium channels for sliding shutters, jointing cleats for fixing etc., complete all as specified and directed.

S&F Anodised aluminium window/ ventilator shutters side hung type with sash, aluminium section weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150 mm long (1 No) suitable , type B-21 hinge 100 mm long (2 No), suitable handle (1 No) etc for each leaf, complete all as specified and directed.

S&F Anodised aluminium door shutters with aluminium section weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, 02 Nos aluminium handle each door, hinges, anodised aluminium snap beading screws etc., complete all as specified and directed.

S&F aluminium deco grill in door and windows with weight not exceeding 1.00 Kg/Sqm including necessary arrangement for fixing etc as specified and directed.

S&F 4.80 mm thick sheet glass with solar control film 25 micron reflective type sticked to glass pane ,ordinary quality exc 0.5 Sqm in each pane complete all as specified and directed

S&F Door closer hydraulically regulated designation No 3, univeral type, of aluminium (extruded section body), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and as directed.

S&F Door closer hydraulically regulated designation No 2, univeral type, of aluminium (extruded section body), suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and as directed.

S&F Door closer hydraulically regulated designation No 3, univeral type, of aluminium (extruded section body), suitable for door shutters of width upto 700 mm, and of wt not more than 35 Kg and fixed, complete all as specified and as directed.

S&F Aluminium Door seal of overal size 42 mm having nylon brush of 20 mm fixed on aluminium body strip of 22 mm, fixed with screw on Aluminium door, wooden shutters or PVC shutters complete all as specified and as directed.

S&F 100 mm mild steel 4 lever mortice lock vertical type of size complete all as specified and as directed.

Dismantling/demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed.

M & L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6.0 metre mean radius as wall built in cement & sand mortar 1:6, complete all as specified and as directed.

Taking down cement or cement lime plaster of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

M&L for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of concrete surfaces as in ceiling including finishing the surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces including finishing the surface even and smooth, complete all as specified and as directed.

M&L for preparation of newly plastered or un plastered surfaces of walls and applying two coats of oil emulsion distemper white or tinted (copolymer based resin glue to be added for longer durability and better finish) over one coat of water based white pigmented alkali resistant priming paint, over 1 mm thick wall care putty on Wall Surface including all necessary arrangement for execution of work ,complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed.

M&L for preparation of new plastered or un plastered surfaces of wall including cornices, pilasters etc and applying two coat of cement based paint of approved colour/camouflaging pattern on wall Surface including all necessary arrangement for execution of work, complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed.

Demolition of cement concrete (unreinfored) in ground floors and pavings nexc 15 cm thickness (below or above ground levels) complete all as specified and as directed.

M&L for 75 mm PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for 40 mm thick 1:2:4 type B-1 (using 20 mm graded stone aggrgate) finished even and smooth with using extra cement complete all as specified and as directed.

Supply only glass dividing strip 3 mm thick , 38 mm wide complete all as specified and as directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/path laid in panel surface finished even and fair without using extra cement complete all as specified and as directed.

Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in sub floor, laid and finishing the surface of concrete topping even and rough to receving of screed for tiling, complete all as specified and as directed.

M&L for vitrified ceramic tiles, 10 mm thick (square/rectangular) polished, area of each tiles not exc. 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, laid over 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface of size 350x250x7mm/ 450x350x7 mm thick, laid over 15 mm thick rendering in cement mortar (1:3) and set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles, complete all as specified and as directed.

M&L for 20-25 mm thick kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20 mm thick screed bed in CM 1:6, complete all as specified and as directed.

M&L for 15 mm thick machine cut kota stone slab on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in colored cement to match the shade of Kota stone laid over 10 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finishing rough to receive stone, complete all as specified and as directed.

M&L for 18 - 20 mm thick black machine cut granite slab (of any type) (table rubbed and polished), as in steps, jambs, pillars, window- cills, cooking platform set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab laid over and including 15 mm thick cement screed in cement and sand mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for 12 -15 mm thick granite work (of any type) (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 10 mm thick screed bedding layer in CM 1:3 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situation including making of hole suitable for gas pipe etc. complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and othe similar bands, plinth courses, bed plates, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed.

Dismantling of Stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified and as directed.

M&L for sand stone slabs of 75 mm thick in shelves, cills, landings etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all as specified and as directed.

M&L for sand stone slabs of 50 mm thick in sun-shades cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all as specified and as directed.

Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof coverings, complete all as specified and directed..

Pre painted galvalume alumimnium zinc coating GI based corrugated steel sheet 0.50 mm thick, sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified and directed.

Pre painted galvalume alumimnium zinc coating GI based plain steel sheet 0.50 mm thick sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified and directed.

S&F 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with ‘L’ or 'J' hooks, complete all as specified and directed.

Fixing only asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with fixed with 'L' or 'J' hooks, complete all as specified and directed. Note: AC sheet retrieved against item No. 116 shall be reused.

S&F asbestos cement two pieces adjustable serrated ridge, 6 mm thick for corrugated or semi-corrugated sheets fixed with 'L' or 'J' hooks complete all as specified and directed.

S&F asbestos cement two pieces adjustable Plain wing ridge, 6 mm thick for corrugated or semi-corrugated sheets fixed with 'L' or 'J' hooks complete all as specified and directed.

Fixing only two pieces adjustable serrated ridge for asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with 'L' or 'J' hooks, complete all as specified and directed. Note: Ridge for AC sheet retrieved against item No. 116 shall be reused.

S&F for 2.0 mm thick, fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc., complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

Dismantling of posts or struts (wood, steel or RCC) embedded in concrete/brick work of any section, including taking out embedded portion and making good disturbed ground.

Dismantling timber scantlings 40 Sqcm and over in section from unframed work, complete all as specified and as directed.

Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section from unframed work, complete all as specified and as directed.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed.

M&L for cement concrete type B-2. 1:2:4 (using 40 mm graded aggregate) in foundations, filling and mass concrete, complete all as specified and as directed.

S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A', complete all as specified and directed.

S&F rolled mild steel Hollow section square or rectangular of wall thickness 3.25 to 4.25 mm thick, work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A', complete all as specified and as directed. .

M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W Gde E-250 quality 'A', complete all as specified and directed.

Dismantling wall and ceiling boards ( fibre, pulp, insulation ,etc. ) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F anodised aluminium snap grid frame work of grid size 605 x 605 mm for false ceiling complete all as specified and as directed.

S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F for 4 mm thick non-asbestos fibre cement building boards fixed to aluminium framework, complete all as specified and as directed. Note: Frame work for ceiling shall be measured and paid separately)

S&F for PVC wall panelling in repair with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angle fixed with solvent cement complete all as per manufacturer's instructions complete all as specified and as directed.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed

Taking up or down steel tubing and connections, 25 mm bore fixed on walls, floors or ceiling etc including cleaning for re-fixing or removal to store complete all as specified and as directed

S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed

S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed .

S&F GI tubing medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and as directed

S&F in repair Bib tap, cast copper alloy long body with crutch or butterfly handle, screwed down, suitable for 15 mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified and as directed.

S&F in repair Bib tap, cast copper alloy, chromium plated, fancy type long body with crutch or butterfly handle, screwed down, suitable for 15 mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified and as directed.

S&F in repair pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, with or without lettered "Hot" or "Cold" for 15 mm nominal bore , screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with long screwed shank and fly nuts, with or without lettered "Hot" or "Cold" suitable for 15 mm nominal bore iron pipe, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 15 mm bore stop valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm bore stop valves, cast copper alloy, fancy type chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm bore stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair Brass CP mixer 15 mm, for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair Waste coupling of PTMT (half or full threaded) of 32 mm bore of discarge pipe . (Minimum weight 32m-45gms) complete all as specified and directed.

S&F in repair Waste coupling of PTMT (half or full threaded) of 40 mm bore of discarge pipe . (Minimum weight 40mm- 60gms complete all as specified and directed.

S&F in repair vitreous china wash down water closet (Pedestal pattern) white excluding (flushing cistern and flush pipe), complete all as specified and directed.

S&F in repair vitreous china squatting pan,Órissa pattern size 580 x 440 mm white, with integral foot rest and CI 'P' trap complete , all as specified and directed.

S&F in repair toilet paper holder with flat recessed type stainless steel, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device seat and cover for pedestal pan, complete all as specified and directed.

S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device seat and cover for pedestal pan, complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, 10 lit capacity with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair of Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe including waste pipe complete all as specified and directed.

S&F in repair Vitreous China wash hand basin, white, flat back, size 550x400mm including brackets & waste pipe of PVC 32 mm bore of low or high densitycomplete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm including complete all as specified and as directed.

S & F in repair of chromium plated shower rose 125 mm dia with 200 mm long CP arm with swivel joints, any size, including fixing to steel pipe or union complete all as specified & directed.

S&F in repair of Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S & F in repair, 500 ltr ISI marked three layer, white colour, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position & including 20 mm brass ball valve complete all as specified and as directed.

S & F in repair, 1000 ltr ISI marked three layer, white colour, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) with thread type cover and fixed with screw hoisted and fixed in position & including 20 mm brass ball valve complete all as specified and as directed.

Disconnecting existing tanks of capacity exc 500 litres & n exc 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. inculding refixing of float valve, gate valve, nipple socket all necessary fixures, making functional without overflow complete all as specified and as directed. Note: (i). Cleaning of tank shall be measured separately. (ii). If float valve is required to be replaced, the same shall be measured separately.

Cleaning and removing all scale , dirt etc form tanks and from mouths of circulating pipe etc of capacity exc 500 lts but not exc 1000 ltr with gunny bags and sands cleaning with fresh water and bleaching powder complete all as specified and as directed

Disconnecting existing tanks of capacity exc 250 litres & n exc 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. inculding refixing of float valve, gate valve, nipple socket all necessary fixures, making functional without overflow complete all as specified and as directed. Note: (i). Cleaning of tank shall be measured separately. (ii). If float valve is required to be replaced, the same shall be measured separately.

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc.capicity exc 250 ltr &nexc 500 litre with gunny bags ,sand cleaning with fresh water and bleaching powder and marking date of cleaning with CA No complete all as specified and as directed.

Supply only PTMT ball valve of 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high denisty plastic ball screwed for iron pipe (minimum wt -210 grams) complete all as specified and as directed.

Supply only PTMT ball valve of 15 mm bore high pressure of PTMT with epoxy coated aluminium rod & high denisty plastic ball screwed for iron pipe (minimum wt- 142 grams ) complete all as specified and as directed.

S&F in repair PTMT ball valve of 15 mm bore high pressure of PTMT with epoxy coated aluminium rod & high denisty plastic ball screwed for iron pipe (minimum wt 142 grams for ball only) complete all as specified and as directed.

S&F in repair PVC cover thread type for PVC Water tank 500 ltr capacity and fixed with screw to tank complete all as specified and as directed.

M & L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

S&F welded steel wire fabric ,weight n. exc 4.00 kg/sq. m fixed to steel members complete all as specified and as directed.

Demolition cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 as in plateform for water tank using 20 mm graded stone aggregate with smooth finish without using extra cement including necessary form work etc.complete all as specified and as directed.

Demolition & breaking up drain pipes AC, (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 100 mm/75 mm complete all as specified and as directed.

S&F PVC (SWR) pipe not less than 6 Kgf/sqcm rating single socketed, in any length with rubber ring joints including clamps of FI 40x3 mm fixed bolt 8 mm drilled to wall, type 'B' ISI marked of 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) pipe not less than 6 Kgf/sqcm rating single socketed, in any length with rubber ring joints including clamps of FI 40x3 mm fixed bolt 8 mm drilled to wall, type 'B' ISI marked of 75 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) bend of 110 mm bore with access door of any radius complete all as specified and as directed.

S&F in repair PVC (SWR) bend of 75mm bore with access door of any radius complete all as specified and as directed.

S&F in repair PVC SWR) 'S' trap of 110 mm bore, complete all as specified and directed.

S&F in repair 15 mm bore, 2-way bib cock with wall flange, cast copper alloy, fancy type chromium plated, screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, bell,same board, independent or power) complete fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of wall, floor & ceiling etc.

Dismantling of old U/S sub main wiring and service wire of any size & make.

Dismantlingof old U/S rusted main switch/DB of any size capacity and make.

M&L point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in PVC conduit pipe with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size of PVC boards/ existing sunken box for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly complete all as specified and directed for the following :-

One light point controlled by one way switch.

One fan point controlled by one way switch.

One 3 pin 6 Amp socket point outlet on the same board with other switches

One 3 pin 6 Amp socket point outlet on the independent board

All as per item No 191 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified and directed.

S&F ceiling rose surface bakelite 50 x 40 mm three terminal ISI marked including suitable size of PVC board.

S&F socket outlet 2 in 1, 3 pin 5 Amps multi purpose flush type 230 volt .

S&F switch socket combinatin 2 in 1, 3 pin 5 and 15 Amp flush type multi purpose 230 volt.

S&F switch piano flush button single pole one way 6 Amps 230 volt grade.

S&F step type electronic fan regulator 5 step 120/280 volts of 400 Watt capacity ,socket flush flush type including connecting up complete all as specified and directed.

Distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 415/240 volt of the following DBs :-.

4 way TPN with 200 amps rated busbar 415 volts (double door type).

8 way SPN with 200 amps rated busbar 240 volts (double door type).

4 Way SPN with 200Amp rated busbar 240V (Double door type)

S&F MCB with GI hardware fixed in DB's of the undermentioned type and rating. .

MCB SP 240 volts 6-32 Amps C Curve

MCB SPN 32 Amps, 240 volt C Curve

MCB TPN 63 Amps, 415 volt

S&F Linear LED T8 tubular lamp of 20 watt with extruded aluminium body,PC diffuser and inbuilt driver including compact batten suitable for LED T8 lamps , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1Sqmm Make Crompton or equivalent in Bajaj/Havells/Philips/Crompton.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 9 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete

M&L submain wiring complete with 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 4 Sqmm copper cable for earth continuity conductor in and including drawn through PVC conduit/sleeves of size 20 mm dia with all PVC accessories fixed on wall, floor/ceiling etc.

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

M&L bracket light fitting wall mounting, champagne gold finish fixture with plastic body suitable for 14 W LED lamp B22 base. all as directed by Engr-in-charge. Make: Havells of Cat No- LHFOECE1TZ10014 or equivelent in Cromption/ Bajaj

S&F sheet metal enclosure of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of DP 20 Amps, 240 volts. Make- L&T, Havells, Legrand complete all as per specified by Engr-in-charge.

M&L of Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 2.25 Mtr below the ground level with the top edge of earth plate, depth not less than 1.5 Mtr below the ground level connected to connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts and washers protected by GI tubing light grade 15 mm dia uptoTest point 20 mm dia watering pipe with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in any type of soil ,removal of surplus soil and providing charcol dust & salt layers all around the earth plate upto 15 cm in all as required specified & directed by engr in charge ( Note:- Up to 7.5 Mtr length of pipe of 40 mm dia and GI strip shall be deemed to be included in unit rate quoted by tenderer GI pipe and GI strip beyond 7.5) will be measured separately under respective item.

Taking down and S&F 20 watts LED street light fitings new generation energy saving, environmental friendly, long life, versatile pressure die cast aluminium IP66 with 10KV surge protection road way, luminaire with high power LED as light source and connecting with 4.0 sq mm multistranded aluminium conductor PVC insulated twin core weather proof cable from fittings to over head lines or to the jucntion box and fixing to complete all as specified and directed including 1.2 Mtr long GI Pipe bracket 25 mm dia with 02 No. MS clamp., Make :- Crompton / wipro / Havells / Philips.

abhinav and company

M/s Ranaji Construction Co

Shiva Builders

GANGA CONSTRUCTION

M/S Solanki Brothers