WBPWD/EE/PMED/NIQ-46/2024-25

Amount

Supplying & Fixing best quality (1/2'' thick) bakelite board (24' x 12') fixing on angle iron frame on wall incl. S & F 03 nos. 415 V, 63 A kit-kat rewireable fuse (Porcelain fuse carrier & base) & 01 no. 415 V, 63A Cu neutral link(Make: L&T/ Havells) on porcelain chair fixed on the bakelite board. [NS]

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish 'Average run 8 mtr.

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish

On Board

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

3x(1.5 sqmm) (for 2x6A Board)

2x(2.5 sqmm)+1x(1.5 sqmm) ( for computer & power board)

2x(6 sqmm)+1 x (4 sqmm)

4x(10sqmm)+2x(6 sqmm)

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works

150 mm x 100 mm x 65 mm

200 mm x 150 mm x 65 mm

175 mm x 100 mm x 65 mm

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required

150 mm x 100 mm x 65 mm

200 mm x 150 mm x 65 mm

175 mm x 150 mm x 65 mm

S & F solderless Copper socket by crimping of Copper wires.

a)1.5 sq mm

b) 2.5 sq mm

c) 4 sq mm

d) 6 sq mm

e) 10 sq mm

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required .

S & F 240 V, 2 nos. 6A, plug socket with separate 2 nos. 6 A Piano key type switch, (Anchor/ISI-marked) on sheet metal switch board embedded in wall incl. S & F 175 x 100 x 65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (Seperate 2x 6A plug).

Supplying and fixing 415V, 63 A TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make-L&T/ Schneider/ Siemens)

Supplying and fixing 415V, 63A TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc

Supplying & fixing sheet metal (16 SWG) Iron Clad 4 bars, 415V, 100A, size 4 x (2x 40x5)mm Cu Busbar and busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – (As per Drawing no. 470 of PWD Specification Book – May 1991)

Supplying & Fixing 4 way, 40A double door Vertical TPN MCB Distribution Board for MCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. interconnection with suitable size of copper wire & neutral link & provision for earthing attachment. incl. S & F 1) 415 V, 40 A, FP MCB of breaking capacity 25 KA/35 KA as incomer with fixed thermal & fixed magnetic/adjustable thermal & fixed magnetic setting in DB & necessary connections- 01 no., 2) Outgoings: a) 415 V, 6-32 A TP C-Curve MCB of breaking capacity 10 KA -4 nos (Make: Legrand),

S & F 415V 16-32 Amp per way 4 way TPN MCBDB with SS enclosure double door with IP 42/43 protection with 4 pool 40 Amp MCB isolator as incomer and C curve 10KA SPMCB’s as outgoing concealed in wall after wall cutting and mending good the damages to original finish including interconnection with suitable sixze of Cu wire neutral link and earthing attachment. 4 way Enclosure (607913), 2nos 40A, TP MCB and 6 no. (16-32 Amp)SPMCB (Make Legrand).

S & F 415V 6-10A perway (2+12way) SPN MCBDB with SS enclosure double door with IP 42/43 protection with 2 pole 40 Amp isolator as incomer & 6-16A 12 nos SPMCB C curve 10KA SPMCB’s as outgoing concealed in wall after wall cutting & mending good the damages to original finish including interconnection with suitable size of Cu wire neutral link &earthing attachment (Make Legrand)

Supplying & Fixing of time sensor switch consisting of the following accessories: A) 25 A DP MCB , C-Curve of breaking capacity 10 KA - 01 no. (Make: Legrand), B) 24 hour digital timer switch (Legrand: 412631)- 01 no., C) 240 V DP, 40A power contactor (Legrand)- 01 no., D) Auto manual toggle switch- 01 no., E) LED indicator lamp- 01 no. Red & 01 no. Green in (2+10) way SPN MCB DB concealed in wall /Surface on wall & mending good the damages to original finish incl. interconnection with suitable size of copper wire & provision for earthing attachment. (For compound light control)

S & D of 1.1 KV. Gr. armored XLPE/A Al. LT cable of following rating for connection [Make:RR/Polycab/Havells] [NS]

4 core X 25 sqmm [Bus bar to VTPN]

2 core X 10 sqmm [For street light]

Laying only 1.1 KV. Gr. armored XLPE/A Al. LT cable of following rating on wall and U/G.

4 core X 25 sqmm

2 core X 10 sqmm

Supplying and fixing 4 core compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry & finishing the ends by soldering of XLPE/PVC armoured cables as below :

4 core X 25 sqmm

2 core X 10 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 core X 25 sqmm

2 core X 10 sqmm

Excavation of soil for installation of Earth Electrode and filling & ramming.For Morrum Soil.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. Long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. Long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. Below the ground level as below: a) By ISI-Medium GI pipe.

Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS

No.-4 SWG

S & F of road lighting luminaire ( IP 66 ) with peanut lens and high power LED and to ensure uniform distribution, higher spacing between poles and maintenance free system, 10KV SPD, THD < 10%, PF> 0.95, BIS approved silicon filled potted driver, minimum LPW: 110 lumen/w and minimum system output 4950 lumen suitable for use with 230Volt, 50Hz. (Make: Signify/ Crompton/ Havells/ Wipro)

S & fixing of 50 mm. dia 1.5 mtr. long G.I. Single arm bracket fixing on wall by suitable nut bolt clamp arrangement for fixing of out door light as per direction of EIC.

Supply & Delivery double LED Fittings with LED tube ( Philips Make, Cat No.TMC 502 P 2xT-LED 22W P3242 incl. 2x MAS LED (PC body) tube 1200mm 18W865 T8 I--2100lm Or Equivalent product of Wipro having similar specification in all respect)

Supply & Delivery Single LED Fittings With LED tube ( Philips Make, Cat No.TMC 502 P 1xT-LED 22W P3241 incl. 1x MAS LED (PC body) tube 1200mm 18W865 T8 I--2100lm. Or Equivalent product of Wipro having similar specification in all respect)

Supply of 10 W surface mounted round LED light fittings having 100 lm/Watt with glare free uniform illumination Incl. necessary connections as per direction of EIC. (Make- Phillips, /Havells/CG as approved by E.I.C )

Supply of 9W LED bulb (Bajaj/CG/Philips/ wipro) on existing batten holder

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required.

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

Fixing only lamp

Fixing of square or circular surface mounted LED fittings

Supply of ac ceiling fans of 1200mm sweep with burst-proof P2/S3 Capacitor complete with safety wire all accessories without regulator. ( Make -CG/Orient/USHA Striker Plus as approved by E.I.C)

Supply of heavy duty Exhaust fan(Make-EPC Hevy Duty] of followinng sizes after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust incl. s&f louver shutter as per G.S. )

9"( 230mm ) Speed 1370 RPM

12"( 3000mm ) Speed 1420 RPM

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter

RASH ELECTRICAL WORKS

ELCON ENGINEERS