Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.2 LAccepted-AOC PUDUCHERRY | PONDICHERRY | PUDUCHERRY | 605005 | L1 | Accepted-AOC single tenderer so awarded |
| Sl No | Description | Qty | Unit | MANAVAZHAKAN R L1 |
|---|---|---|---|---|
| 1.00 | Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation renches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms for all lift including getting out the excavated soil and disposal of surplus excavated soil as per direction of Engineer-in-charge within a lead of 50m -all kinds of soil | 43 | cum | 279 ₹11,997 Lowest |
| 2.00 | Close timbering in trenchesding strutting, shoring and packing cavities (wherever required) complete (measurements to be taken of the face area timbered) . Depth not exceeding 1.5m | 16 | sqm | 110 ₹1,760 Lowest |
| 3.00 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and all lift | 17 | cum | 170 ₹2,890 Lowest |
| 4.00 | Supplying and filling with gravel (excluding rock) in trenches , plinth, sides of foundations etc . In layers not exceeding 20 cm in depth consolidating each deposited layers by ramming and watering etc complete including all lead and lift | 23 | cum | 900 ₹20,700 Lowest |
| 5.00 | Supplying chemical emulsion in sealed containers including delivery as specified -Chlorpyriphos / lindane emulsifiable concentrate of 20% | 5 | litre | 390 ₹1,950 Lowest |
| 6.00 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 fine aggregate : 10 graded stone aggregate 40mm nominal size) | 12 | cum | 6,243 ₹74,916 Lowest |
| 7.00 | Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finsishing and reinforcement - All
work upto plinth level 1:1.5:3 (1cement : 1.5 fine aggregate : 3 graded stone aggregate 20 mm nominal size) | 18 | cum | 8,788 ₹1,58,184 Lowest |
| 8.00 | Reinforced cement concrete work in walls (any thickness) ,including attached pilasters, buttresses, plinth and sting courses , fillets ,columns, pillars , piers , abutments ,posts and struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 fine aggregate : 3graded stone aggregate 20mm nominal size) | 3 | cum | 10,040 ₹30,120 Lowest |
| 9.00 | Reinforced cement concrete work in beams,suspended floors,roofs having slope up to 15degree landings, balconies, shelves, chajjas , lintels,bands,plain window sills,staircases and spiral stair cases for above plinth level upto floor five level excluing the cost of centering , shuttering, finishing and reinforcement,with 1:1.5:3 (1cement:1.5 fine aggregate coarse sand :3graded stone aggregate 20mm nominal size) | 9 | cum | 10,972 ₹98,748 Lowest |
| 10.00 | Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers,facias and eaves boards upto floor five level excluding the cost of centering,shuttering , finishing and reinforcement ,with 1:1.5:3(1cement: 1.5 fine aggregate:3 graded stone aggregate 20 mm nominal size) | 1 | cum | 10,633 ₹10,633 Lowest |
Tender Value
₹24.1 L
EMD Value
₹48,135
Closing Date
7 Oct 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Commissioner_ PM
The Commissioner, Marie Building, Pondicherry Municipality
Construction of Anganwadi Building at Amman Koil Street in Orleanpet, Orleanpet Constituency, Puducherry
2024_DLA_16613_1
PM/EE/e-tender/45/2024-25
Open Tender
Civil Works
Item Rate
240 days
Orleanpet
Please refer Tender documents.
2 documents required · 2 mandatory
₹525
₹48,135
9 Sept 2025
27 Sept 2024
8 Oct 2024
27 Sept 2024
7 Oct 2024
27 Sept 2024
Amount
Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation renches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms for all lift including getting out the excavated soil and disposal of surplus excavated soil as per direction of Engineer-in-charge within a lead of 50m -all kinds of soil
Close timbering in trenchesding strutting, shoring and packing cavities (wherever required) complete (measurements to be taken of the face area timbered) . Depth not exceeding 1.5m
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and all lift
Supplying and filling with gravel (excluding rock) in trenches , plinth, sides of foundations etc . In layers not exceeding 20 cm in depth consolidating each deposited layers by ramming and watering etc complete including all lead and lift
Supplying chemical emulsion in sealed containers including delivery as specified -Chlorpyriphos / lindane emulsifiable concentrate of 20%
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 fine aggregate : 10 graded stone aggregate 40mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finsishing and reinforcement - All work upto plinth level 1:1.5:3 (1cement : 1.5 fine aggregate : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness) ,including attached pilasters, buttresses, plinth and sting courses , fillets ,columns, pillars , piers , abutments ,posts and struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 fine aggregate : 3graded stone aggregate 20mm nominal size)
Reinforced cement concrete work in beams,suspended floors,roofs having slope up to 15degree landings, balconies, shelves, chajjas , lintels,bands,plain window sills,staircases and spiral stair cases for above plinth level upto floor five level excluing the cost of centering , shuttering, finishing and reinforcement,with 1:1.5:3 (1cement:1.5 fine aggregate coarse sand :3graded stone aggregate 20mm nominal size)
Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers,facias and eaves boards upto floor five level excluding the cost of centering,shuttering , finishing and reinforcement ,with 1:1.5:3(1cement: 1.5 fine aggregate:3 graded stone aggregate 20 mm nominal size)
Centering and shuttering including strutting , propping etc and removal of form for - foundations, footings, bases of columns etc for mass concrete
Centering and shuttering including strutting , propping etc and removal of form for - Suspended floors , roofs , landings , balconies and access platform
Centering and shuttering including strutting , propping etc and removal of form for - Lintels , beams , plinth beams , girders , bressumers and catilevers
Centering and shuttering including strutting , propping etc and removal of form for - Columns , Pillars , Piers , Abutments , Posts and Struts
Centering and shuttering including strutting , propping etc and removal of form for - Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards
Providing precast cement concrete jali 1:2:4 ( 1 cement : 2 fine aggregate : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6mm dia mild steel wire including centering and shuttering, roughening cleaning , fixing and finishing in cement mortar 1:3 ( 1 cement : 3 fine aggregate ) etc. complete excluding plastering of the jambs, sills and soffits - 40 mm thick
Steel reinforcement for R.C.C. work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo-Mechanically treated bars Fe -500D or more
Brick work with common burnt clay F. P.S. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 fine aggregate)
Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:4 ( 1 cement : 4 fine aggregate)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level upto floor V level - cement mortar 1:4 (1 cement : 4 coarse sand)
Extra for providing and placing in position 2 nos 6mm dia M.S.bars at every third course of half brick masonry
Providing and fixing 18mm thick gang saw cut, mirrorpolished, premoulded and prepolished, machine cut for latforms,vanity counters,window sills, facias and similar locations, of required size, approved shade,colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 fineaggregate), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing,curing,moulding and polishing to edges to give high gloss finish etc.complete at all levels – Raj nagar plain white marble / Udaipur green marble / Zebra black marble – area of slab over 0.50 sqm
Providing wood work in frames of doors , windows, clerestory windows and other frames , wrought framed and fixed in position withb hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -Vengai wood
Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately , all complete as per direction of Engineer-in-charge -(Note:- Butt hinges and necessary screws shall be paid separately) - Vengai wood - 35 mm thick shutters
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors , windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Vengai wood
Providing 40 X 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bots, nuts and wooden plugs and embeddings in cement concrete block 30 x10 x 15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
Providing and fixing bright finished brass butt hinges with necessary screws etc complete - 125 X 85 X 5.5 mm (heavy type)
Providing and fixing bright finished brass butt hinges with necessary screws etc complete - 75 x 65 x 4 mm (heavy type)
Providing and fixing bright finished brass door latch with necessary screws etc complete - 250 x 16 x 5 mm
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc complete
Providing and fixing chromium plated brass handles with necessary screws etc complete - 125 mm
Providing and fixing chromium plated brass handles with necessary screws etc complete - 100 mm
Providing and fixing chromium plated brass handles with necessary screws etc complete - 75 mm
Providing and fixing aluminium tower bolts , ISI marked , anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade , with necessary screws etc. complete - 300 x10 mm
Providing and fixing aluminium tower bolts , ISI marked , anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade , with necessary screws etc. complete - 200 x10 mm
Providing and fixing aluminium hanging floor door stopper , ISI marked , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc complete - Single rubber stopper
Providing and fixing PTMT door catcher of lenth 72 mm and dia of 42 mm with suitable washers weighing not less than 33 gms
Providing and fixing facory made door frame (single rebate ) made out of solid foam PVC extruded profile of minimum 60mm width and minimum 30mm thickness, having homogenous fine cellular structure and integaral smooth outer skin. The frame's vertcal and horizontal members to be mitered cut and joined together with PVC solvent adhesive / cement and both corners strenthened with fully threaded steel screws (of required size) fixed diagonally. The door frame is to be fixed to door jambs using 6 nos.SS 304 grade minimum 8mm dia CSK Phillips stainless steel self tapping screws / fastners with PA6 grade polyamide sleeves both of required size , and gap if any between the door frame and the jamp must be filled with clear silicon, complete as per direction of Engineer-incharge
Providing and fixing factory made PVC door shutter made of solid foam PVC profiles of thickness 5mm and 15mm at edges integrally extruded for vertical style and horizontal (top/bottom/lock) rails of minimum cross section of 70mm x28mm , of shape and design as per manufacture's specification having homogenous fine celluar structure and smooth integral outer skin, inserted with G.I. "C' section/rectangular tube profile of minimum 0.30mm thickness with 120 gsm coating as stiffeners as per manufacturer's specification Mitred cut joints for styles and rails provided with telescopic polymeric 'L" corners are jointed together using solvent adhesive and strengthened with fully threaded stainless steel screws (of required size) through reinforced stiffener with panelling of specified solid foam PVC board / high pressure laminate of required thickness and of approved design and shade (matching the styles and rails), secured within styles and rails with specially designed solid foam PVC moulded beadings of required size using PVC solvent adhesive /cement . The finished door shutter including SS hardware , 1 no. ss sliding bolt 200x10mm , 1 no SS tower bolt 200x 10mm and 2 nos .SS handles 125mm, shall be fixed to frame with 3 nos. stainless steel hinges of minimum size 100x58x1.9mm and ss screws of required size complete as per direction of Engineer-in-charge (Cost of above hardware is inclusive in rates) - 5mm thick solid foam PVC panel of required size with moulded / extruded beading of appropriate design shape and size as per manufacturer's specification ( to secure the panel insert tight in place within the style and rails of shutter) matching the colour and shade of shutter frame. Non decorative type
Providing and fixing M.S. fan clamp type I or II of 16mm dia M.S. bar, bent to shape with hooked ends in R.C.C.slabs or beams during laying , including painting the exposed portion of loop, all as per standard design complete
Steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing,staircase railing and similar works, including applying priming coat of approved steel primer - G.I.pipes
Provding and fixing 1st quality ceramic glazed floor tiles conforming to IS:15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy,bottle green,black of any size as approved by Engineer-incharge,in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3fine aggregate) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete
Providing and laying ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer) , of 1st quality conforming to IS:15622, of approved make , in all colours, shades,except white , ivory, grey,fume red brown, laid on 20 mm thick bed of cement mortar 1:4 (1 cement :4 fineM aggregate), jointing with grey cement [email protected] kg /sqm including pointing the joints with White cement and matching pigments etc., complete
Providing and laying vitrified floor tiles of size 600x600 mm (thickeness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make,in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 fine ggregate) ,jointing with grey cement slurry @3.3 kg per sqm including grouting the joints with white cement and matching pigments etc.,complete -size of tile600x600mm
Providing and laying pressed clay tiles (as per approved pattern 18mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 fine aggregate) mixed with 2% integral water proofing compound , laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 fine aggregate) and finished neat complete
Lime concrete terracing on roofs of required thickness laid to fall with 25mm nominal size brick aggregate and 50% lime mortar 1:2 (1 lime putty 2 surkhi) rammed and finished with gur and belgiri treatment complete including rounding of junctions with Parapet wall complete
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - Coupler - 110mm
Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - Single tee with door - 110x110x110mm
Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - bend 87.5 degree - 110 mm bend
Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - shoe (plain) - 110mm shoe
Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs , screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc., complete - 110mm
12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand)
15mm cement plaster on the rough side of single or half brick wall of mix - 1:4 (1cement : 4 fine sand
15 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or halfbrick wall
6mm cement plaster of mix 1:3 (1 cement : 3 fine sand)
Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content - with water thinnable cement primer on wall surface having VOC content less than 50 grams / litre
18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand ) - flush band
Finishing walls with acrylic smooth exterior paint of required shade – New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @0.90 litre / 10 sqm
Applying priming coat - with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood
Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand filling the joints with coarse sand etc. all complte as per direction of Engineer incharge
Supplying fixing and commisioning of 2 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc.complete
Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid, 10 litre low level white P.V.C.flusing cistern, including flush pipe,with nually controlled device (handle lever), conforming to IS:7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - W.C. pan with ISI marked black solid plastic seat and Lid
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps ,32 mm C.P.brass waste of standard pattern , including painting of fittings and brackets ,cutting and making good the walls wherever required - white Vitreous China wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps
Providing and fixing Stainless steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I.brackets and stainless steel plug 40mm , including painting of fittings and brackets, cutting and making good the walls wherever required - kitchen sink without drain board - 610x460 mm bowl depth 200mm
Providing and fixing 8mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S.triangular plate to Eureopean type W.C of quality and make as approved
Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete - semi rigid pipe - 32mm dia
Providing and fixing mirror of superior glass (of approvedquality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing - rectangular shape 453 x 357 mm
Providing and fixing soil,waste and vent pipes - 100 mm dia - sand cast iron S&S pipe as per IS: 1729 1.00 1 metre
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour - 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88mm, weighing not less than 170 gm
Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement , trenching refilling & testing of joints complete (External work) - 20 mm nominal outer dia pipes
Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement , trenching refilling & testing of joints complete (External work) - 25 mm nominal outer dia pipes
Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement , trenching refilling & testing of joints complete (External work) - 100 mm nominal outer dia pipes
Providing and fixing brass bib cock of approved quality - 15mm nominal bore
Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) - 25mm nominal bore
Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end) - 20 mm nominal bore
Providing and fixing gun metal non -return valve of approved quality (screwed end) - 25mm nominal bore -vertical
Providing and fixing rectangular high density polyethylene water storage loft tank with cover ISI: 12701 marked, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support including fittings and fixtures for tank shall be paid separately
Supplying and fixing C.I.cover without frame for manholes - 455 x 10 mm rectangular C.I.cover (light duty) the weight of the cover to be not less than 23 kg
Supply of Quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness
Providing and fixing ball valve (brass) of approved quality complete - high or low pressure with plastic floats - 25mm nominal bore.
Proviing and fixing ferrule coforming to IS 2692 and ISI marked along with test cetificate,including labour charges for rilling,cutting,threading,fixing in distribution pipes etc.,complete -25mm dia
Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost ofsolvent cement,UPVC specials such as bends,tees,threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 75mm dia.
Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC specials such as bends,tees, threaded pieces couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 110mm dia.
Supplying and fixing of DOL starters 0.5HP to 5 HP with relay range 0.63 A to 13 Awith suitable M.S. angle frame complete.
Printing new letters and figure for any shade withsynthetic enamel paint black or any other approved colour to give aneven shade - Hindi
Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit asrequired - 20mm
Supply and fixing of the 20mm dia PVC bend. Make: Avonplast/Vijaya
Supplying and fixing of following size of PVC junction box in required position along the line of PVC conduit as required. Make: Avonplast/Vijaya 20mm Junction Box one way.
Supplying and fixing of following size of PVC junction box in required position along the line of PVC conduit as required. Make: Avonplast/Vijaya 20mm Junction Box two way.
Supplying and fixing metal box of following sizes (nominal size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front including painting etc.as required - 200 mm x 150 mm x 60 mm
Supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc.as required - 5/6 A switch
Supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc.as required - 3 pin 5/6 A socket outlet, piano type ISI marked
Supplying and fixing following modular switch / socket on theexisting modular plate & switch box including connections but excluding modular plate etc. as required - 15/16 A switch
Supplying and fixing following piano type switch / socket on the existing switch box / cover including connections etc.as required - 6 pin 15/16 A socket outlet
Supplying and fixing 3 pin , 5 A ceiling rose on the existing junction box / wooden block including connection etc as required
Supplying and fixing of PVC round back plate. Make: Kundan/Modi.
Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface recessed steel / PVC conduit as required - 2 X 1.5
Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface /recessed steel / PVC conduit as required -3 x 2.5 sq.mm
Supply and fixing of 1x40W single tube box type fitting with copper choke, tube light with fixing charges, including connection and testing as required. Make: Philips/Bajaj.
Supplying and fixing of Bulk head fitting aluminium alloy body heat resistant prismatic glass cover with specially designed gasket, with 36 CFL Lamp with fixing charges, including connection and testing as required. Make: Philips /Bajaj
Supplying and fixing of 1x40W Single tube streetlight fitting with sheet aluminium housing and UV stabilized acrylic cover, copper choke, tube light, bracket of 32mm dia G.I pipe required bolts, nuts and fixing charges, including connection and testing as required. Make: Philips/Bajaj
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc .as required. - Single Pole
Supplying and fixing of 32 A , TPN , switch disconnector fuse unit (Panel mounted type) with ISI marked HRC fuses
Supply and fixing of 25mm dia G.I pipe for service connection.
Supply and fixing of 40mm dia G.I Bend for service connection.
Erection of G.I.wire No.8 SWG including binding etc.as required
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc.as required - upto 120 sq.mm
Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections,etc, as required - 63 A TP&N
Supply and fixing of concealed type of ceiling fan metal hook Box (L.M.R)
Supplying and fixing PVC batten / angle holder including connection etc.as required
Supply 20 Watts LED bulb. Make: Philips /Bajaj /Cormpton.
Supplying of 1200mm sweep double ball bearing ceiling fan, Make: Almonard /Usha.
Supplying and laying of 4.0Sqmm weatherproof multi stranded aluminum wire, Make: Finolex / Havells/RR/ Polycab.
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.(but without charcoal / coke and salt) as required.
Stepped type Modular Fan regulator (2 module)
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_16964.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .