Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹6.0 L
EMD Value
₹11,988
Closing Date
20 May 2024, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Assistant Engineer (Elect), SHQ BSF Jammu
SHQ BSF Jammu, Paloura BSF Campus
Providing main service connection to generator room and adm block including installation of MFP/SFP at 148 BN BSF under SHQ BSF Jammu.
2024_BSF_806613_1
No/DIG/Engg/E-Tender/SHQ/JMU
Open Tender
Electrical Works
Works
90 days
BSF Campus Paloura
As per NIT
10 documents required · 10 mandatory
₹0
₹11,988
25 May 2024
9 May 2024
21 May 2024
9 May 2024
20 May 2024
9 May 2024
Amount
Supplying and fixing of one number XLPE insulated and PVC sheathed power cable of 1.1 KV grade of 3C x 120 Sqmm (Power) + 1C x 16 Sqmm (Street Light) + 1C x 70 Sqmm (insulated) aluminium conductor conf. to IS : 7098( Part 1)/ 1988 on the existing 9 Mtr PCC poles including termination of cable at both the ends of cable and making suitable connection etc as required. (Make- Polycab , Havells, KEI/ RR Kabel, etc)
Supplying and Laying of one number XLPE insulated and PVC sheathed power cable of 1.1 KV grade of 3.5 x 70 sq. mm XLPE insulated and PVC sheathed armored cable aluminium conductor 1.1 KV grade conf. to IS : 7098( Part 1)/ 1988 direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. (Make- Polycab , Havells, KEI/ RR Kabel, etc)
Supplying and making end termination with brass compression gland and aluminum lugs for following size of XLPE insulated and PVC sheathed aluminum conductor cable of 1.1 KV grade as required. i) 3.5 X 70 sq. mm (38mm)
Supplying and making end termination with brass compression gland and aluminum lugs for following size of XLPE insulated and PVC sheathed aluminum conductor cable of 1.1 KV grade as required. i) 3.5 X 120 sq. mm (45 mm)
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required i) 100 mm dia
Supplying, installation, testing and commissioning of indoor type feeder pillar suitable for 415 V, 3 phase, 4 wire, 50 Hz AC supply system fabricated in compartmentalized design from 3 mm thick CRCA sheet, double door type with inbuilt locking arrangement, 3 mm pasivated gland plate, depth not less than 450 mm and all connection (incoming and outcoming) will be taken out in cable alley. The panel shall be cleaning, processing and finishing with 7 tank process for powder coating in approved shade and supplied with suitable pedestal of 50mm x 50 mm x 6 mm angle iron frame with 4 Nos 450 mm long legs, 200 Amp 4 nos high conductivity aluminium bus bar with DMC/SMC support, earth bus as the same size as the phase bus running across the length of the panel, solid connection from main bus bar to switchgear, control wiring with 1.5 sqmm FRLSH insulated multi stranded copper conductor with cable alley, including providing and fixing following switchgear, fixing LED phase indicator and following accessories etc complete as required. The panel shall be mounted on suitable cement concrete foundation 30 cm below the ground level and 50 cm above the ground level. The panel should not less than 1250 mm x 1250 mm x 450 mm as CPRI approved. Note:- (i) Panel size indicated is nominal. The actual size shall be as per the drawing approved by the Department. Incomer i) MCCB 04 Pole 160 Amp Havells/C&S/L&T/HPL Fixed type 35 Ka breaking cap. 02nos ii)On load Changeover Switch 04 Pole 160 Amp Havells/C&S/L&T/HPL - 01 nos ii) MFM 383A LED Meter - 2 No. (Make :- L&T/Slec) iii) LED Phase Indicating Lamps - 1 Set of 03 Nos. Outgoings i) MCCB 04 Pole 100 Amp Havells/C&S/L&T/HPL Fixed type 26-30 Ka breaking cap. 02 nos with spreader terminals ii)MCCB 04 Pole 63 Amp Havells/C&S/L&T/HPL Fixed type 16-20 Ka breaking cap. = 01 iii) MCCB 04 Pole 40 Amp Havells/C&S/L&T/HPL Fixed type 16-20 Ka breaking cap. = 01 nos with spreader terminals iv) 32 Amp TPN - 2 Nos and 32 Amp DP - 2 Nos
Supplying, installation, testing and commissioning of outdoor hut type feeder pillar suitable for 415 V, 3 phase, 4 wire, 50 Hz AC supply system fabricated in compartmentalized design from 3 mm thick CRCA sheet, double door type with inbuilt locking arrangement, 3 mm pasivated gland plate, depth not less than 300 mm and all connection (incoming and outcoming) will be taken out in cable alley. The panel shall be cleaning, processing and finishing with 7 tank process for powder coating in approved shade and supplied with suitable pedestal of 50mm x 50 mm x 6 mm angle iron frame with 4 Nos 800 mm long legs, 200 Amp 4 nos high conductivity aluminium bus bar with DMC/SMC support, earth bus as the same size as the phase bus running across the length of the panel, solid connection from main bus bar to switchgear, control wiring with 1.5 sqmm FRLSH insulated multi stranded copper conductor with cable alley, including providing and fixing following switchgear, fixing LED phase indicator and following accessories etc complete as required. The panel shall be mounted on suitable cement concrete foundation 30 cm below the ground level and 50 cm above the ground level. The panel should not less than 1025 mm x 1250 mm x 450 mm as CPRI approved. Note:- (i) Panel size indicated is nominal. The actual size shall be as per the drawing approved by the Department. Incomer i) MMCCB 04 Pole 100 Amp Havells/C&S/L&T/HPL Fixed type 25-30 Ka breaking cap. 02 nos with spreader terminals ii) MFM 383A LED Meter - 1 No. (Make :- L&T/Slec) iii) LED Phase Indicating Lamps - 1 Set of 03 Nos. Outgoings i) MCCB 04 Pole 63 Amp Havells/C&S/L&T/HPL Fixed type 26-30 Ka breaking cap. 02 nos ii)MCCB 04 Pole 40 Amp Havells/C&S/L&T/HPL Fixed type 16-20 Ka breaking cap. = 02 nos iii) 32 Amp TPN - 2 Nos and 32 Amp DP - 2 Nos
Supplying and Erection of 9 mrt RCC pole (minimum size required: bottom width : 335 mm, top width: 115 mm, thickness:105 mm) in brick ballast and ramming the foundation, finishing with 150 mm thick cement concrete (1:3:6) layer on the top with including excavation and refilling etc as required.( depth should 1/6th length of pole)
Supplying & fixing of hot dipped galvanized iron Hook - Flat Eye (HOOK ROD DIA- 16 mm, EYE HOOK DIA- 38 mm, FLAT WIDTH- 35 mm, FLAT THICKNESS- 06 mm & length 250 mm) and 9 mtr RCC pole mounting clamp not less than 115 mm , made out of 06 mm thick and 35 mm wide and 400 mm long flat hot dipped galvanized iron flat strip including suitable, bolts, nuts and washer etc as required
Supplying & fixing of Suspension Clamp - Self Supporting Type, suitable to hold 3 × 95 mm2 + 1 × 70 mm2 AB Cable made from high strength Galvanized Steel including suitable, bolts, nuts and washer etc as required
Supplying & fixing of Dead End Clamp - Self Supporting Type, suitable to hold 3 × 95 mm2 + 1 × 70 mm2 AB Cable made from high strength Galvanized Steel including suitable, bolts, nuts and washer etc as required
Earthing with GI earth earth pipe 4.5 mtr long, 40 mm dia including accessories and providing masonry enclousure with cover plate having locking arrangement and watering pipe etc with charcoal coke and salt etc as required
Providing and fixing 25 x 5 mm GI Strip on surface or in recess for connection etc as required.
JP Infratech
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .