MOTOR PROTECTION CIRCUIT BREAKER (MPCB) FOR EXHAUST FAN

Special Eligibility Criteria

1. 1

   The item is reserved to procure only from the firm's who are approved / development source's of RCF for RCF Item ID: 2400045, Switch Board cabinet for LHB EOG AC coaches, available on IREPS Vendor Directory (U-VAM) "OR" from the sources of item mentioned in the BOM of RDSO specification Sr. No. 50 of Annexure of RDSO Letter No. EL/7.1.108/MSSBC dated 17.09.21 NOTE : Accepted Make Model for tendered item must be as per BOM of RDSO specifications as per Sr. No. 50 of Annexure of RDSO Letter No. EL/7.1.108/MSSBC dated 17.09.21 attached.

   Document required
2. 2

   1. Firms who are participating as an authorized dealer of RCF Sources of the main assembly for RCF Item ID: 2400045, Switch Board cabinet for LHB EOG AC coaches "OR" Firms who are participating as an authorized dealer of sources of item mentioned in the BOM of RDSO specification Sr. No. 50 of Annexure of RDSO Letter No. EL/7.1.108/MSSBC dated 17.09.21, are required submit the TENDER SPECIFIC AUTHORIZATION letter from the source on behalf of which they are participating into tender on their (source's) letterhead along with the tender. Non-submission of valid TENDER SPECIFIC AUTHORIZATION letter will make their offer invalid and offer will be summarily rejected. 2. Firms who are RCF sources of the main assembly for RCF Item ID: 2400045, Switch Board cabinet for LHB EOG AC coaches, are not required to submit any authorization letter being supplier of Main assembly but Accepted Make Model for tendered item must be as per BOM of RDSO specifications as per Sr. No. 50 of Annexure of RDSO Letter No. EL/7.1.108/MSSBC dated 17.09.21 attached

   Document optional
3. 3

   Developmental vendors are only such vendors which are listed as developmental vendors available on IREPS Vendor Directory (U-VAM) of the item ID/sub item ID applicable to this tender WITHOUT ANY CONDITION (i.e. without any condition regarding prototype approval or field trials approval conditions/remarks). Note : Please also refer the other conditions related with implementation and applicability of eligibility criteria that are mentioned in Para 1.2 of general conditions of tender in section-II of NWR tender condition (SBD).

   Document optional
4. 4

   Bidders are requested to comply the requirement as per para 3 of SBD for Earnest Money Depost (EMD) falling which offer shall be summarily rejected. Bidders are seeking Waiver or exemption from payment of EMD shall have to attach scanned copy of the requisite document evidence in support of their claim. All bidder who are exempted to submit EMD as per Clause 3.1.1 of Section-I of NWR Tender document, are required to sign Bid Security Declaration as mentioned in clause 3.1.5. Submission of offer by such exempted bidders will be considered that they have signed the above bid security declaration. Bidders who are not exempted to submit EMD and bidders who are under disqualification for EMD exemption as on date of tender opening, are mandatorily required to submit EMD (online) as mentioned in Tender NIT. (Note: Please refer Para 4 in section-I of NWR tender condition (SBD) for applicability of MSE benefits).

   Document optional

Commercial-Compliance

1. 1

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

Other Conditions

1. 1

   INSPECTION CLAUSE : Inspection by TPI against GC/TC/WTC of OEM.
2. 2

   SD Condition: Security deposit will be applicable as Clause 12 of Section-II of NWR tender conditions.

   Document optional
3. 3

   Micro and Small Enterprises firms:- Benefits preferential treatment to Micro and small enterprises shall be applicable as per para 4 of section-I CONTAINED IN nwr SBD attached with the tender. Therefore, bidders are required to submit Udyam registration certificate along with the offer. Bidders not submitting the required document will not be eligible to claim benefits extended to MSE firms.

   Document optional
4. 4

   Tenderer should mention in their offer: - 1. Name of manufacture with complete address. 2. Place of inspection be indicated with complete address, option for inspections at godowns/outstation/multiple places be strictly avoided, and preferably be permitted only at manufacturers place.

   Document optional
5. 5

   In accordance with Para 5.8 (b) & (c) of section - I of NWR Standard Bidding document (SBD) Version - January-2026, since the value of procurement is in excess of Rs. 10 crores, the contractor shall be required to provide a certificate from the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of local content. The certificate should have valid UDIN mentioned in certificate. Such certificates shall be required to be submitted by the contractor along with each online bill in IREPS. The supplier must include 'PO number & PO date', name of item, name of firm, local content percentage, and details of the location(s) at which the local value addition is made, in the certificate. In Case the contractor / Supplier does not meet the stipulated local content requirement and the category of the supplier changes from Class-I to Class-II / Non-local or from Class-II to Non-local, a penalty in the form of deduction of 10% of the contract value shall be imposed. However, contract once awarded shall not be terminated on this account.
6. 6

   In accordance with Para 5.8 (a) of section - I of NWR Standard Bidding document (SBD) Version - January- 2026," Bidder shall, at the time of bidding be required to indicate percentage of local content and provide self-certification that the item offered meets the local content requirement for "Class-I local supplier"/ "Class-II local supplier".

   Document required

1. 1

   Offer with any deviation from INSPECTION CLAUSE mentioned in tender will be SUMMARILY REJECTED.

2. 2

   Validity of offer is 90 days. If any deviation submitted by the firm in validity of offer then their offer shall be summarily rejected.