Repair / Renovation up-gradation of main building of Bal-Ashram Kuleed Kishtwar

Amount

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : (Including all leads, lifts and Carriages).

All Kinds of soil

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 (1 cement : 6 coarse sand) (Including all leads, lifts and Carriages).

Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse sand) : 25 mm thick (Including all leads, lifts and Carriages).

Kota stone slab 25mm thick in risers of steps,skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (Including all leads, lifts and Carriages).

20mm Cement plaster of mix: 1 : 6 (1 cement : 6 fine sand) (Including all leads, lifts and Carriages).

Providing and laying/ fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in colour shades except White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete. (Including all leads, lifts and Carriages).

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (Including all leads, lifts and Carriages).

Providing and fixing glazed shutters for doors, windows and clerestory windows using 1 Okg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. second class Kail wood (Including all leads, lifts and Carriages).

Renewing glass panes, with wooden fillets wherever necessary : Glass panes weighing 10 kg /sqm (Including all leads, lifts and Carriages).

Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete.With 2nd class teak wood beading 62x19 mm (Including all leads, lifts and Carriages).

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding (Including all leads, lifts and Carriages).

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete job

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (Complete Job)

New Surface (Two or more coat) over incl.priming coat with cement primer

Old Surface (One or more coats)

Finishing walls with water proofing cement paint of required shade (Complete Job).

New work (two or more coats) applied @3.84 kg/10sqm

Old work (one or more coats) applied @2.20 kg/10sqm over priming coat of primer applied @ 0.80 litres/1 0 sqm complete including cost of priming coat.

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) (complete job)

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade (Complete Job)

New steel work (two or more coats)

Old steel work (one or more coats)

Rectifying the leakage in roof by engaging carpenter ( Complete Job)

Labour

Making the opening in brick masonry including dismantling, fixing chowkhats in floor or walls cutting masonry and fixing holdfasts in cement concrete 1:3:6 (1 cement:3coarse sand : 6 stone aggregate 20 mm nominal size) painting two coats of coal tar to sides of chowkhats and making good the damages to walls and floors complete to match the existing surface : For window (Including all leads, lifts and Carriages).

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class deodar wood (Including all leads, lifts and Carriages).

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate. Crushed. (Including all leads, lifts and Carriages).

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Second class kail wood (Including all leads, lifts and Carriages).

Full Rate

Labour Rate

Providing and fixing 6 mm thick ply for ceiling (Including all leads, lifts and Carriages).

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. (Including all leads, lifts and Carriages).

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 2nd class kail wood (Including all leads, lifts and Carriages).

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float of glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 1st class kail wood (Including all leads, lifts and Carriages).

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 27 5gm/m2 (Including all leads, lifts and Carriages).

Demolishing cement concrete maually/by mechanical means including disposal of material within 50 metres lead: 1:3:6 or richer mix (Including all leads, lifts and Carriages).

Providing / fixing of PVC pipe including applying adhesive & jointed water tight complete job of approved quality. (complete job)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (Including all leads, lifts and Carriages).

Dismantling G. I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead : 15 mm to 40 mm nominal bore. (Including all leads, lifts and Carriages).

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore Medium (Complete job)

20 mm dia. nominal bore Medium

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 : 15 mm nominal bore (complete job)

Providing and fixing ball valve (brass) of approved quality complete (complete job)

High or low pressure with plastic floats 15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore (complete job)

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 15 mm nominal bore (complete job)

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 15 mm nominal bore (complete job)

Providing and fixing C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg. 15 mm nominal bore of standard back type. (comple job)

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (complete job)

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete: 10 litre (full flush) capacity-white (complete job)

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: White solid plastic seat with lid. (complete job)

Providing and fixing G. I. inlet connection for flush pipe connecting with W.C. pan. (complete job)

Providing and fixing kitchen sink with C. I. brackets, C.F'. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm (complete job)

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete Semi rigid pipe 32 mm dia complete job.

Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap. (complete job)

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm (complete job)

Providing and fixing soil, waste and vent pipes : 100 mm dia. Sand cast iron S&S pipe as per IS: 1729 (complete job)

Providing and fixing plain bend of required degree: 100 mm dia. Sand cast iron S&S as per IS: 1729 (complete job)

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 106gms.(complete job)

Providing and fixing PTMT shelf 440 mm long , 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. (complete job)

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. (complete job)

MR. JEHANGIR AHMAD BUTT

M/S NISHAT AHMAD AND SONS

CHANDER MOHAN GUPTA

shabir ahmed kamal

Ashaq Hussain

M/S ABDUL LATIF BHAT BAGWAN AND CO

AIYAZ AHMAD MIR