Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹52.7 LAccepted-AOC HOUSE NO 251 E BLOCK ADARSH NAGAR BALLABHGARH FARIDABAD 121004 HARYANA | FARIDABAD | FARIDABAD | HARYANA | 121004 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹94.8 L+₹42.1 L (79.9%)Rejected-Finance AIRPORT ROAD SKALZANGLING LEH LADAKH 194101 | LEH LADAKH | LADAKH | 194101 | L2 | Rejected-Finance Other than L1 Bidder | |
| 3 | L3₹1.1 Cr+₹61.6 L (116.9%)Rejected-Finance | L3 | Rejected-Finance Other than L1 Bidder | |
| 4 | Rejected-Technical | - | Rejected-Technical Rejected due to not enlisted in c (i) category | |
| 5 | Rejected-Technical 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | - | Rejected-Technical Rejected due to not enlisted in c (i) category |
Tender Value
₹97.8 L
EMD Value
₹1.7 L
Closing Date
17 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Cdr, HQ 138 WE
HQ 138 Works Engineers PIN-914138 C/O 56 APO
REPAIR/ MAINT AND SERVICING OF CENTRAL HEATING SYSTEM OF CERTAIN UNITS INCL OTHER CONNECTED WORKS AT SECTOR A UNDER AGE E/M-II OF GE 865 EWS AT LEH
2023_MES_587782_2
138WE/L-15/2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE 865 EWS
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE 865 EWS
₹1.7 L
Yes
9 Oct 2023
10 Aug 2023
24 Aug 2023
10 Aug 2023
17 Aug 2023
10 Aug 2023
Amount
Dismantling of burner assembly CHS and removing of side cover of boiler capacity 1.5 lakh kilo/cal/hr and complete servicing the boiler including exhaust outlet i.e chimmney by removing the complete carbon/oil deposits with suitable coil shine chemical including repair to coil assembly by welding if there is any leakage found or any other repair required at site and reassembling/ testing the same, complete all as specified and directed by Engr-in-Charge.
Dismantling of burner assembly CHS and removing of side cover of boiler capacity 10 lakh kilo/cal/hr and complete servicing the boiler including exhaust outlet i.e chimmney by removing the complete carbon/oil deposits with suitable coil shine chemical including repair to coil assembly by welding if there is any leakage found or any other repair required at site and reassembling/ testing the same, complete all as specified and directed by Engr-in-Charge.
All as per srl item No 1 above but for 1 Lakh Kilo/cal/hr incl all filters of radiator assembly, complete all as specified and directed by Engr-in-Charge.
Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 3 HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including varnishing , cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.
Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 2 HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including varnishing , cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.
Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 7.5 HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including varnishing , cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.
Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 5 HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including varnishing , cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.
Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 0.5 HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including varnishing , cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.
S&F in replacement sequence controller suitable for 0.6 to 1.5 lakh kilo/hr with burner rod assembly, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of ignition rod suitable for 0.6 to 1.5 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of ignition Transformer electronic type suitable for 0.6 to 1.5 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of Ignition Transformer electronic type suitable for 10 Lakh K Cal/hr burner rod assembly, complete all as specified and directed by Engr-in-Charge.
M & L for complete servicing of deisel pumps suitable for boiler of capacity 0.6 to 1.5 Lakh K cal/Hr including replacement of bearings, seal etc as per site requirement complete all as directed by Engr-in-Charge.
S&F temp controller digital type DTC 503 with sensor suitable for 0.6 to 1.5 lakh kilo/Cal/hr LAL 2.25 burner rod assembly, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of photo cell as per existing suitable for 0.6 to 1.5 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr-in-Char
S&F in replacement of photo cell as per existing suitable for 10 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed by Engr-in-Char
S&F in replacement of burner nozzle suitable for 0.6 to 1.5 lakh K/Cal/Hr complete all as specified and directed by Engr in Charge.
S&F in replacement of burner nozzle suitable for 10 Lakh K Cal/Hr complete all as directed by Engr-in-Charge
S&F in replacement of Electrode suitable for burner of capacity 0.6 to 1.5 lakh K/Cal/Hr complete all as specified and directed by Engr in Charge.
S&F in replacement of pressure gauage 0 to 20 Kg/cm sq as per existing,complete all as specified and directed by Engineer-in-Charge.
S&F in replacement of thermostate assembly tail type as per existing suitable for 0 to 30 degree centrigrade temprature, complete all as specified and directed by Engr in Charge.
S&F in replacement of auto air pressure valve 3/8" as per existing, complete all as specified and directed by Engr in Charge.
S&F in replacement of High pressure fuel pipe 1.5 mtr as per existing, complete all as specified and directed by Engineer-in-Charge.
M & L for replacement of burner complete assembly single phase 220 volts, Type ST-120, Model-ST-120K, or Equavelent Eco flame Capacity 02-5.6KG/hr, suitable for 1.5 Lac Kcal/hr boiler complete all as specified and directed by Engr-in-Charge.
M & L for replacement of burner complete assembly single phase 220 volts, Type ST-120, Model-ST-120K, or Equavelent Eco flame Capacity 02-5.6KG/hr, suitable for 1 Lac Kcal/hr boiler complete all as specified and directed by Engr-in-Charge.
M & L for replacement of burner rod assembly single phase 220 volts, Type ST-120, Model-ST-120K, or Equavelent Eco flame Capacity 02-5.6KG/hr, suitable for 10 Lac Kcal/hr boiler, complete all as specified and directed by Engr-in-Charge.
M &L for disconnecting the AHU any capacity complete shifting to out side of the building and replacing unserviceable parts cleaning inside and outside and fixing its original place and testing complete all as specified and directed by Engr-in-Charge.
S&F in replacement of V - Belt, B-108 suitable for AHU motor, complete all as specified and directed by Engr-in-Charge.
Taking out the unservicable insulation from MS ERW pipe of size 80mm bore of pipe and providing for Insulation of MS Pipe with PUF slab 40 mm thick and applying bituminuous compound and GI cladding with 26 gauge GI sheet complete including complete earthwork for clearance around the pipe, complete all as specified and directed by Engr-in-Charge.
All as per item No.29 above but of size 150mm bore of pipe.
All as per item No.29 above but of size 125mm bore of pipe.
All as per item No.29 above but of size 100mm bore of pipe.
All as per item No.29 above but of size 50mm bore of pipe.
All as per item No.29 above but of size 40mm bore of pipe.
All as per item No.29 above but of size 32mm bore of pipe.
All as per item No.29 above but of size 25mm bore of pipe.
All as per item No.29 above but of size 20mm bore of pipe.
M&L for 80mm dia MS ERW pipe heavy grade 'C' Class complete heavy grade class, 'C' with welded ends laid in ducts over the angle iron supports/ fixed on the walls including fittings complete all as specified and directed by Engr-in-Charge. (Note : The item rate is inclusive of cutting to any levels/shapes like elbows, tees, bends etc, welding joints wherever necessary as per the site requirement)
All as per item No.38 above but of size 200mm
All as per item No.38 above but of size 150mm
All as per item No.38 above but of size 100mm
All as per item No.38 above but of size 50mm
All as per item No.38 above but of size 40mm
All as per item No.38 above but of size 32mm
All as per item No.38 above but of size 25mm
All as per item No.38 above but of size 20mm
Taking down old unserviceable PPR Pipe size 20 mm dia with complete all accessories, complete all as specified and directed by Engr-in-Charge.
Taking down old unserviceable PPR Pipe size 25 to 32mm dia with complete all accessories, complete all as specified and directed by Engr-in-Charge.
Taking down old unserviceable PPR Pipe size 40mm dia with complete all accessories, complete all as specified and directed by Engr-in-Charge.
S&F PP-R pipes PN 20/SDR 6, 3 layer 40mm dia bore with all fittings conforming to IS-15801 and fixed complete to walls and ceiling or laid in floors or trenches including complete all fittings such as Tee, L Bend, Reducer, socket, Union etc, complete all as specified and directed by Engr-in-Charge.
All as per item No.50 above but of 32mm dia bore.
All as per item No 50 above but 25mm bore dia.
All as per item No 50 above but 20mm bore dia.
Supply and fixing gate valve confirming to ISO 9001- 2000 conforming to IS-15801 screwed down high pressure with crutch or butter fly handle screwed both ends for PP-R pipes or for union and fixed completely as specified for the size 40mm dia bore, complete all as specified and directed by Engr-in-Charge.
All as per item No.54 above but of size 32mm dia bore.
All as per item No.54 above but of size 25mm dia bore.
M&L for replacement of Cast iron Butterfly valve of size 80mm dia Class PN 1.6 with SG Iron Dice flanged ends (integrally cast) horizontal type, conforming to IS-14846 (ISI marked) with stainless steel spindle and iron wheel non rising type including jointing material complete such as rubber or fibre board insertion packing rings with requisite numbers of nuts, bolts & washers etc including taking out existing unserviceable valve, complete all as specified and directed by Engr-in-Charge.
M&L for replacement of Cast iron Butterfly valve of size 150mm dia Class PN 1.6 with SG Iron Dice flanged ends (integrally cast) horizontal type, conforming to IS-14846 (ISI marked) with stainless steel spindle and iron wheel non rising type including jointing material complete such as rubber or fibre board insertion packing rings with requisite numbers of nuts, bolts & washers etc including taking out existing unserviceable valve, complete all as specified and directed by Engr-in-Charge.
All as Above item no 58 but 100mm dia
All as above item no 58 but 80mm dia
S&F in replacement of inlet/outlet forged brass ball valve 20 mm with Y Stainer for FCU, hot water for -25 to 90 degree temperature as per existing, including supply and fixing GI nipple of size 3/4 inch including welding work, cutting the existing rusty unserviceable MS/GI nipple complete including taking out existing unserviceable valve, complete all as specified and directed by Engr-in-Charge.
S&F and replacement of Inlet/outlet forged brass ball valve 25 mm with Y Stainer for FCU, hot water for -25 to 90 degree temperature as per existing, including supply and fixing GI nipple of size 3/4 inch including welding work, cutting the existing rusty unserviceable MS/GI nipple complete including taking out existing unserviceable valve, complete all as specified and directed by Engr-in-Charge.
S&F and replacement of Forged steel globe valve, bolted bonnet outside screw & yoke type rising stem for 40mm dia complete including taking out existing unserviceable valve, complete all as specified and directed by Engr-in-Charge.
All as per item No 63 above but of size 25mm dia bore.
All as per item No.63 above but of size 32mm dia bore.
All as per item No.63 above but of size 20 mm
All as per item No.63 above but of size 50 mm
Brass flare nuts of size 20/15 mm bore and fix the brass valves/FCUs including taking out existing unserviceable valve, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of FCU connection flexible pipe 20/16 mm as per existing, complete all as specified and directed by Engr-in-Charge.
Material and labour for complete cleaning and checking the serviceability of fan coil unit of any capacity for having continuous sreviceability of FCU for any number of time as desired by Engr-in-Charge including replacement of minor spare part like Gasket, Teflon tape, flare nut, tightening of any loose glycol line connections, shifting FCU from one place to another place if required, heating up the freezed glycol line anywhere about the premices and cleaning with the chemical solution by pressure pump from inlet to outlet to have continuous flow of glycol fluid, repairing the insulation of pipe line of any size by providing shallow tape / GI wire as deemed fit, for fastening the insulation with pipe line, stopping any kind of leakage from any size of pipe line, tightening the loose electrical connections as related with FCU / Heating system, cleaning the air filter including radiator of FCU to the entire, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of fan coil unit duel shaft electric motor 1/12 HP, 30 watt 930 RPM, 3 speed as per existing, complete all as specified and directed by Engr-in-Charge.
Supply and fixing radiator unit of FCU including connecting with the unit and making it leakproof of capacity 1.5 TR consisting of copper coils covered with aluminium finsing as per existing size of capacity 3000 K Cal / Hour including dismantling the existing unserviceable, complete all as specified and directed by Engr-in-Charge.
Supply and fixing radiator unit of FCU including connecting with the unit and making it leakproof of capacity 2.5 TR consisting of copper coils covered with aluminium finsing as per existing size of capacity 4500 K Cal / Hour including dismantling the existing unserviceable, complete all as specified and directed by Engr-in-Charge.
M&L Welding the leakage portion of MS pipe line including earhwork complete and materials as required for welding the pipe line of size 25 mm to 80 mm including testing on full pressure, complete all as specified and directed by Engr-in-Charge.
M&L Welding the leakage portion of MS pipe line including earhwork complete and materials as required for welding the pipe line of size 80 mm to 200 mm including testing on full pressure, complete all as specified and directed by Engr-in-Charge.
M&L for cleaning of MS overhead POL storage tank of capacity 2000 Ltr including all type of T&P and chemical required for the same, including welding work to leakage surface including opening and refixing the existing insulating materials to the external surface of storage tank, complete all as specified and directed by Engr-in-Charge.
Material and labour for replacement of old unserviceable centrifugal monoblock pump 3 phase 415 volts of capacity 3 HP with Mechanical seal complete fittings with accessories , complete all as specified and directed by Engr-in-Charge.
Material and labour for replacement of old unserviceable centrifugal monoblock pump 3 phase 415 volts of capacity 2 HP with Mechanical seal complete fittings with accessories , complete all as specified and directed by Engr-in-Charge.
Material and labour for replacement of old unserviceable centrifugal monoblock pump KDI-515+ 3 phase 415 volts of capacity 5 HP with Mechanical seal complete fittings with accessories , complete all as specified and directed by Engr-in-Charge.
Material and labour for attending of complaint for day to day / daily complaints by employed skilled staff, checking the serviceability of fan coil unit of any capacity for having continuous sreviceability of FCU for any number of time as desired by Engr-in-Charge including replacement of minor spare part like Gasket, Teflon tape, flare nut, tightening of any loose glycol line connections, shifting FCU from one place to another place if required, heating up the freezed glycol line anywhere about the premices to have continuous flow of glycol fluid, repairing the insulation of pipe line of any size by providing shallow tape / GI wire as deemed fit, for fastening the insulation with pipe line, stopping any kind of leakage from any size of pipe line, tightening the loose electrical connections as related with FCU / Heating system, cleaning the air filter including radiator of FCU to the entire satisfaction of Engineer-in- Charge all as directed at site. Note :-(i)Attending any complaints of different nature in a single day in Corps HQ COmplex Plant Room inside / outside will be considered as one job. ii)Any kind of replacement of major items shall be measured and paid for separately under respective item of schedule 'A' iii) . Any nature of complaint related with FCUs, radiators, bursting/cracking/leakage of MS pipe lines, replacement of valves etc will be completed round the clock by suitable trademen (welder with suitable T & P,(including portable heating materials)-01,Skilled mechanic of CHS-01, Plumber/Fitter with helper-each o1, Supervisor-01 as per descreation of Engineer-in- Charge.iv)Job slip will be maintained by the contractor Supervisor under supervision of concerned JE E/M CHS, suitable communication shall be maintained through JE incharge round the clock. v) Any dely in attending complaint will be directly reported to higher authorities and suitable penalities will be incured from the contractor (Minimum 1000/-Per job)
Supply and fixing and replacement of Chilled/Hot Water Fan coil Unit (FCU) vertical type Floor Mounting 2.5 TR Capacity, complete all as specified and directed by Engr-in-Charge.
Supply and fixing and replacement of Chilled/Hot Water Fan coil Unit (FCU) Wall Mounting 2.0 TR Capacity, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of wall mounting (ECO Panel) Convector heater 2.5KW/Hrs Two heat output setup with auto control and LED temperature display. Diemension-Width 1200mm, height, 450mm depth 90mm with complete fixing accessories, complete all as specified and directed by Engr-in-Charge. (Note : Old Unserviceable converter heater to be deposited in MES Store Yard)
S&F in replacement of Soft Plug Top 6Amps with indicator as per existing, complete all as specified and directed by Engr-in-Charge.
Supply, connection and testing of thermal heater wires on water supply pipe lines (GI/MS/PPR) for heating of water through minimum 25 Watt per meter in spiral/ straight line shape above outer diameter of pipe with aluminium tape insulation to preserve heat, fiber glass layer, second layer of aluminium tap to hold fiber glass by glass wool minimum 40mm thick with essential tapes, complete all as specified and directed by Engr-in-Charge.
M&L for replacement of Cast iron sluice valve of size 200 mm dia with CI drilled flanged ends (integrally cast)class PN-I.6 horizontal type, conforming to IS-14846 (ISI marked) with stainless steel spindle and iron wheel non rising type including jointing material complete such as rubber or fibre board insertion packing rings with requisite numbers of nuts, bolts & washers etc including taking out existing unserviceable valve, complete all as specified and directed by Engr-in-Charge.
M&L for Pressure gauge 100mm dia, rating 0 to 80 Kg/Sqcm including taking out existing unserviceable gauge, complete all as specified and directed by Engr-in-Charge.
Material and labour for replacement of old unserviceable centrifugal motor 3 phase 415 volts of capacity 7.5 HP with Mechanical seal complete fittings with accessories , complete all as specified and directed by Engr-in-Charge.
S&F in replacement of plug top 05 Amps, 3 pin as per existing, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of rotary type ON/OFF switches for Fan Coil unit 22mm dia as per existing, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of contactor type MNX 12 (AC-15) : 4A, 415 V, 12 A for 5.5 KW with auxillury contactor MNX-A, A600.P600, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of phase failure relay VSP D1 , complete all as specified and directed by Engr-in-Charge.
S&F in temp controller digital type Sz-7510P with sensor, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of over load relay 5A, 240 V AC/5A 28V, DC, 3A 150V, AC. , complete all as specified and directed by Engr-in-Charge.
S&F in replacement of over load relay 10A, 110 V AC, 1/2 HP, 20V AC, 10A 220V, AC. Make - OMRON, LY4 (2282H3), complete all as specified and directed by Engr-in-Charge.
S&F in replacement of over load relay 3A, 150V AC/5A 240V, AC, 5A 28V, DC. complete all as specified and directed by Engr-in-Charge.
M&L for replacement of diesel filter as per existing (upto 1 ltrs) ccomplete all as specified and directed by Engr-in-Charge.
S&F for sequence controller LOA 24 for burner rod assembly of 10 Lakh K Cal/Hour, complete all as specified and directed by Engr-in-Charge.
Supply and fixing and replacement of Chilled/Hot Water wall mounting indoor type Fan Coil Unit 600 /1.5TR (CFM/TR) Capacity incl 02 Nos of 20mm valve with stainer (inlet&outlet) incl heavy duty PVC pipe for connection , complete all as specified and directed by Engr-in-Charge. (Note : Old Unserviceable wall mounting fan coil unit to be deposited in MES Store Yard)
Supply and fixing and replacement of Chilled/Hot Water Fan coil Unit (FCU) vertical type Floor Mounting 600/1.5TR (CFM/TR) Capacity, complete all as specified and directed by Engr-In-Charge. (Note : Old Unserviceable wall mounting fan coil unit to be deposited in MES Store Yard)
Supply and fixing and replacement of Chilled/Hot Water Fan coil Unit (FCU) vertical type Floor Mounting 2400/6TR (CFM/TR) Capacity, complete all as specified and directed by Engr-In-Charge. (Note : Old Unserviceable wall mounting fan coil unit to be deposited in MES Store Yard)
M/S NANCY ENTERPRISES
M/S MALIK CHAND SIRI RAM
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .