Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.7 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹33.7 L+₹2.2 L (7.08%)Rejected-Finance BARIYAWAN BARIYAWAN BARIYAWAN BARIYAWAN AMBEDKAR NAGAR UTTAR PRADESH 224210 | AMBEDKAR NAGAR | UTTAR PRADESH | 224210 | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹34.3 L+₹2.8 L (8.94%)Rejected-Finance E 30 RAJIV NAGAR BEGUMPUR NEW DELHI 110086 | NEW DELHI | NEW DELHI | DELHI | 110086 | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹34.6 L+₹3.1 L (9.88%)Rejected-Finance | L4 | Rejected-Finance Not Being Lowest | |
| 5 | L5₹35.3 L+₹3.8 L (12.1%)Rejected-Finance RZ D 29A GALI NO 05 SYNDICATE ENCLAVE NEAR DABRI MORE NEW DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | L5 | Rejected-Finance Not Being Lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
4 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (CENTRAL) DELHI CANTT-10
GE (CENTRAL) DELHI CANTT-10
PROVN OF CERTAIN SANCTION WORKS IN THE AREA OF AGE B/R-I AND AGE E/M UNDER GE (CENTRAL) DELHI CANTT-10
2024_MES_645699_1
GE/C-86/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (CENTRAL) DELHI CANTT-10
AS PER NIT
9 documents required · 9 mandatory
₹500
Yes
GE (CENTRAL) DELHI CANTT-10
₹1 L
Yes
25 Jun 2024
8 Mar 2024
6 Apr 2024
8 Mar 2024
4 Apr 2024
22 Mar 2024
8 Mar 2024 - 22 Mar 2024
Amount
M & L for dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
M&L for joint less Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified .
M&L for joint less Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 10mm thick rendering of backing coat in CM 1:4 etc complete all as specified .
M & L for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement to match the shade of granite stone including grinding, nosing and polishing including 20 mm thick screed bed in CM 1:6 complete all as specified
M & L for Taking down cement plaster in brick walls,including raking out joints,hacking for key,scrubbing down with water etc including scaffolding if required complete all as specified.
M&L for rendering 10 mm thick in CM (1:6) on any faces of concrete or brick surfaces finished even and fair without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in CM 1:4 on any faces of concrete or brick surfaces finished even and fair without using extra cement complete all as specified.
M&L for rendering 5 mm thick in CM 1 : 3 on brick or concrete surfaces (in ceiling) etc finished even and smooth without using extra cement all as specified.
M & L for applying two coats of Apex Ultima over one coat of primer on newly plastered surfaces(external) of walls including preparation of new surfaces complete all as specified and directed by Engineer-in-charge.
M & L for two coat of distemper oil emulsion over a coat of primer and 2-3 mm thick JK Birla wall care putty including preparation of new plastered surface of wall complete all as specified and directed.
M & L for applying white wash three coats on newly plastered surfaces of ceiling including preparation of new surfaces for matching with repaired surfaces complete all as specified and directed.
M & L for preparation of old plastered surfaces and applying two coat of oil bound distemper over one coat of primer including 2-3 mm thick JK Birla wall care putty on wall including removal of existing old surfaces complete all as specified and directed.
M & L for complete removal of existing old surfaces treatment of wall by scrubbing with wire brush washing down with water and applying two coats of Apex Ultima, complete all as specified and directed by Engr-In-Charge.
Dismantling loose concrete cover of RCC columns,beams,slads chajjas and the like as directed roughening and cleaning concrete surfaces with steel wire brushes washed with water and allowed to dry including de rusting of steel reinforcement to providing fabric mild steel wire mesh 75X75X3 mm dia as reinforcement to concrete surfaces applying adhesive admixture over steel mesh and providing minimium 40 mm thick (average thickness) guiniting mix using 1 part of ordinary portland cement 53 grade and 2 part of ghaggar sand mixed with the pressure of 2 to 2.5 kg per sqm by guinting machine including rendering 5 mm thick in CM 1 : 3 on brick or concrete surfaces (in ceiling) etc finished even and smooth without using extra cement all as specified.
Taking down chowkhat or frame with shutters (without taking off shutters from the frame exc 1.5 sqm but nexc 4 sqm each all as spd.
Taking down chowkhat or frame with shutters (without taking off shutters from the frame n exc 1.5 sqm each all as spd.
M&L for aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6mm x44.45 mm x2.1,shutter top section 47.62mm x44.45x1.95mm thick shutter bottem vertical section 85 mm x44045 mm x1.80mm yhick ,shutter middle section 83.50mm x 44.45 mm x1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm incl as durected and approved by GE and as per IS specification including provn of 5.5mm thick tinted glass/12mm thick thick prelaminated particle board as required incl handle ,tower bolt ,floor spring heavy duty "SAMRAT" ,looking arrangement "GODREJ" rubber gasket and door stopper complete all as specified and directed.
M & L aluminium alloy windows series -B (18 mm ) 3 track ,1.5 mm section of jindal or equivalent in other approved makes with half opening guage shutter on one track and two glazed shutter half opening each on two track including handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 4.0 mm thick tinted glass /frosted glass of superior quality and stainless steel wiremesh Complete all as specified and directed by Engineer-in-Charge.
Material and labour for aluminium alloy Powder coated standard 10mm section and opening of size window grill as per approved sample and as per IS specifications complete all as specified and as directed.
S&F aluminium ventilator partly glazed/ gauzed including including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and 5mm frosted glass etc. provision for fixing the exhaust fancomplete all as specified and as directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane all as spd.
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm all as spd.
S & F as pressed steel frames (125x60) mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one shop coat of primer incl M & L for providing PCC type C-0 ,1:3:6(using 12.50mm graded stone aggregate) to fill the frame and making good complete all as specified and directed by Engr -in- Charge
S&F 35 mm thick 2nd class hardwood glazed and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSRpart-i section 8 clause 8.24(a) ); supplied and fitted to chowkats complete all as specified and directed.
M & L for 30 mm Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified.
Supply and fix 300 mm long mild steel sliding door bolt, bolt type stove enameled black with bright bolt not less than 12 mm dia with an including a minimum of six bolts and nuts (four on bolt plate and two on staple plate) complete all as specified and directed.
S & F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified.
S & F extruded aluminum alloy handles fabricated type and anodised of size 150mm, complete all as specified.
S & F butt hinges medium weight stainless steel 100mm size complete all as specified.
S & F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
Factory made signle extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/ cum, screw withdrawl strength of 2200N (Face) and 1100 N (edge), minimum compressive strengthy of 58N/ mm2, modules of elasticity 900 N/ mm2 and resistance to spread of flame of being termite / borer proof, water/ moisture proof and fire retardant and fixed with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/ lugs or SS dash fasteners shall be paid for separtely). Note: For WPC solid door/ Window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but not extra payment on this account shall be made.
Factory made signle extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strngth of 1800N (Face) and 900 N (Edge), minimum compressive strength 50N mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless stell butt hinges of requried size with necessary full body threaded star headed counter sunk SS screw, all as per direction of Engr-in-Charge. Note: Stainless steel butt hinges and necessary SS screws shall be paid separtely.
S & F 100 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified.
S & F 100 mm aluminium handles, cast type anodised complete all as specified.
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces not otherwise described over 10 cm width or girth incl preparation complete all as spd.
M&L for preparation of new steel surface and applying two coats of synthetic enamel paint complete all as specified.
S & F in repair rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 1000 ltrs capacity.including float valve 20mm size including disconnecting of existing water tank complete all as specified.
S & F in repair rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 500 ltrs capacity.including float valve 20mm size including disconnecting of existing water tank complete all as specified.
Taking up or down 15 mm dia steel tubing and connection incl cleaning or removal to store all as specified
Taking up or down 20mm dia steel tubing and connection incl cleaning or removal to store all as specified
M & L for 15mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified .
M & L for 20mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified.
Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
Material and labour for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection 75 mm thick laid in bays and surfaces finished even and smooth without using extra cement complete all as specified and directed.
M & L in repairs PVC connection 15mm dia of standard pattern 450mm long, with two Nos brass check nuts (adopts) and washers etc complete all as specified.
M & L 32 mm dia waste fittings of brass chromium plated for wash hand basin with long screwed shank and flynut flange and fixed in repairs, suitable for 32mm dia complete all as specified.
S & F 75 mm bore cast iron soil waste and vent pipe (ISI marked) sand cast in any length with or without ears, with cement joint laid in trenches or in floors or fixed to wall complete all as specified and directed.
S & F 100 mm bore cast iron soil waste and vent pipe (ISI marked) sand cast in any length with or without ears, with cement joint laid in trenches or in floors or fixed to wall complete all as specified and directed.
S&F Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified.
S & F in repairs towel rail 600mm long brass chromium plated of 20mm dia (external) and 1mm thickness with gutties embeded in cement mortar 1:3 with MS screws etc complete all as specified and directed.
S & F for Aluminium drapery Rod 25mm dia Powder Coated including wooden side caps, brackets, and rings @ 120mm c/c/ complete all as approved by Engineer-in-chareg
S&F in repairs fancy type CP brass shower rose with flat panel 125 mm size suitable for 15mm bore pipe complete all as specified and directed .
S & F in repair fancy type brass CP angle valve 15 mm dia complete all as specified.
S & F in repair fancy type concealed brass chromium plated stop valve fancy type suitable for 15mm bore of pipe with long shank and cup complete all as specified and directed .
S&F in repair fancy type brass chromium plated bib tap for iron pipe of 15mm bore fancy type with flynut capstan head, screwed down high pressure complete all as specified.
M & L for cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates as in roof kerbs, or mud stops, rounded or chamfered on edges, coping complete all as specified.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth.
M&L Prelaminated particle board,18/19mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination incl teak wood leaping fixed with screws to timber frame work Complete all as specified and directed by Engineer-in-Charge.
S&F continuous (Piano) hinges, mild steel bright finish or electro glavanised (width of flap when open 30mm) Complete all as specified and directed by Engineer-in-Charge.
S&F 75 mm extruded aluminium alloy handle anodised fabricated type and fixed with MS screws Complete all as specified and directed by Engineer-in-Charge.
S&F for PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws Complete all as specified and directed by Engineer-in-Charge.
M&L second class hard wood timber scantling plain fillets, square, rectangular or triangular in section clear swan, sectional area exc 13 sqcm & not exc 25 sqcm, secured with nails or brads Complete all as specified and directed by Engineer-in-Charge.
S&F 15 mm bore gate valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed Complete all as specified and directed by Engineer-in-Charge.
S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and as directed.
Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortor of any diameter incl bends Complete all as specified and directed by Engineer-in-Charge.
S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.
S&F 110mm dia PVC (SWR) bends any radius .
S&F for stainless steel plate rack of size 60x60x25 cm depth size made out of 0.80mm thick sheet complerte all as specified and directed by Engineer-in-Charge.
S&F in repair stainless steel sink with drainage board made out of 0.80mm thick sheet for kitchen with plug, washers, waste pipe, waste cuppling incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complerte all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs vitreous china wash hand basin (flat back) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size and waste pipe ,CP waste coupling complete fixing arrangement and cutting for and pinning in wall and making good complete all as specified and directed by Engr-in-charge .
S&F in repair vitreous china squatting pan (Orissa pattern) long pan (including provision of lime concrete bedding) of size 580x440mm white with intergral footrest including providing 100mm bore CI 'P' or 'S' trap complete all as specified (excluding flushing cistern and flush).
S&F in repairs PVC Low level flushing cistern 10 ltr capacity incl internal fittings,sypons,handle,bend etc incl 2 Nos CI brackets complete all as specified.
S&Fin repairs 15 mm dia pillar taps, fancy type brass with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed complete all as specified.
S&F in repairs Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railing complerte all as specified and directed by Engineer-in-Charge.
Demolition of reinforced cement concrete in any position all as specified and as directed by Engineer -in-Charge.
S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Dismantling of brick tiles or terracing tiles single layers as on roof complete all as directed .
Demolition of mud in roof any thickness inlcl plastering and leeping and disposal up to 50 meters all as specified.
M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type and also taking down cement plaster on brick/concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified land as directed. Note: The application shall be executed on any type of surface and on horizontal/Vertical areas.
M&L providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajas in multiple coats @2.0 litre/sqm. Primary [coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge.Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger/ Nerolac/STP Ltd.Notes: (1) The work shall be executed through authorised applicator of manufacturer only.(2) Authrised Applicator shall be approved by GE before starting of work.(3) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material.Engineer-in-Charge shall deface the original purchase vouchers.(4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor's dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer. Notes for item No 9,13, 80 & 81: (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (d) MOU with authorized applicator will be submitted by contractor. (d) A guarantee amount of 5% of contract of work done for item No 9,13, 80 and 81 of BOQ will be retained for 5 years of the completion of work.
M & L reinforcement cement concrete 1:1.5:3 nominal mix (using 20mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and this like all as specified.
M & L for formwork to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) for rough finished surface all as specified.
M&L for mild steel TMT bars 10mm dia and over cut to length,bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
M & L for 100 mm thick cement concrete type B- 2, 1:2:4 (40mm graded aggregate).
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including provn of 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified .
All as per item No 86 above but laid/fixed over in vertical surface over and incl and provision of 10 mm thick cement plaster in CM (1:4) back coat complete all as specified.
M & L for non skid ceramic coloured tiles of 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match with the shade of tiles and including cement screeding 15mm thick in cement mortar 1:6 complete all as specified and as directed.
M & L for Glazed ceramic coloured tiles 600x 300 x 9 to 10mm thick in dado, set and jointed in neat cement slurry and pointed in colour cement to match including rendering 10mm thick in cement mortar 1:4 complete all as specified and as directed.
M & L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water. All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint all as specified and directed by Engr-in-charge.
S&F stainless steel gratings 100mm bore size fixed with cement motar.
S&F 75mm cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified.
S&F 100mm cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified.
S&F 75mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.
Dismantling of wall and ceiling board fibre pulp AC boards etc any thickness including cover fillets removing the wiring and refixing the same including fixture as necessary at site including frame work.
M & L for snap grid ceiling with E - board ceiling tiles of size 600x600mm 4mm thick incl aluminium alloy anodised at edges angle 25x25x1.5mm and tee section 38x38x1.5 mm at other than edges both ways fixed with 4mm dia gi wire including two coats of oil bound distemper.
Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. and getting out all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
M & L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed all as specified.
M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 all as specified.
Supply and laying DWCPE (SN8) 200mm dia pipes and snap fit coupler incl testing and laid properly, jointed laid in trenches to a level on cocrete bed complete all as specified and directed by Engineer-in-charge.
M&L for Sand cushion under floors or in foundation including watering and consolidation.
M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified.
Material and labour for medium duty perforated precast machine pressed drain cover slab 80 mm thick of PCC 1:1.5:3 type B-1 and 10mm TMT bars at specing @100mm centre to centre ,including flat iron 150mmx6mm all around the slab and 40mm dia hole at 100mm C/C , size of slab as required at site and complete all as specified and directed.
Demolition of brick work built in cement or cement lime mortar of any description including quoins,arches,pillars,etc., all as directed.
M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks,old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed.
Dismantling wrought iron or mild steel work of any description such as guard bars, grills etc.
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, roof truss and similar work con- forming to Fe.290.Gde-E-165
M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm stone graded agg) as in louversand jallies 40mm thick designed as fort pattern (measured solid) including all moulding but exceeding frame and set in CM1:4 all as per sample shown and directed by engineer-in -charge.
M&L providing CM 1:2:4 Type B-0 12.5 mm graded agg. In precast coppings incl slightly rounded chemered angles and throating including necessary form work complete.
S&F hard drawn welded steel wire fabric weight per sqm not exceeding 4 kg complete all as specified and directed by Engineer-in-Charge.
M & L for framed work as in doors, sun shade or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410W-Gde-250 quality A complete all as specified and directed.
M&L for 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in cup board shutter, loft shutters incl 6 mm thick teak wood lipping and necessary rebating for shutters wherever required including polishing to lipping/rebating complete all as specified.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc
Taking down old MCCB , TPN DBs , SPN DBs, sp mcb & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed.
Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed.
M&L point wiring complete with 1.5 Sqm single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and incl provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box suitable for modular switch ,socket etc boxes all as specified and as directed.
One light /Ceiling fan/exhaust fan point controlled by one switch.
One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.
One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board
M&L point wiring with PVC unsheathed multi stranded copper conductor cable 4.00 sqmm FRLS 1100 Volts in New PVC concealed conduit medium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 4 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified.
M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4 Sqmm size stranded conductor as earthwire.
Supply and fix in repair Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories(Concealed)/ Surface in walls all as specified and as directed.
M&L switch Modular type 6 Amp SP one way ISI marked complete all as specified.
M&L switch Modular type type 16 Amp SP one way, ISI marked complete all as specified.
M&LModular type socket outlet 5 pin 6 Amp flush type, ISI marked complete all as specified.
M&L Modular type socket outlet 2 in 1,5 pin 6/16 Amps, ISI marked complete all as specified.
M&L ceiling rose 3 phase PVC polycorbonate,isolated body, complete all as specified.
S & F Modular electronic fan regulator 5 step,360 degree rotation complete all as specified and directed by engr-in charge.
M&L angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete.
S & F LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base .
M&L for earthing of machinery/equipment/panel/installed at power house/subatation, complete with galvanised steel earth palte electrode 600 x 600 x 6 mm thick buried directly in ground (Earth pit not less than 2.5 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to connected to galvanised earth iron strip 25 x 4mm dia as a earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I )2009) and testing on completion all as specified and directed.
Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 20%, colour temperature - 6500K, surge protection 3KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 105 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete. Note- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited Lab before supply of LED fixtures.
Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 9-10 watts and not less than 900 lm system lumen output with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed. Note- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited Lab before supply of LED fixtures.
M&L in replacement Decorative wall mounting CITY-1 Decorative wall light fixture made up of Polycarbonate, Including 12 W retrofit LED BULB (B-22 base). NOTE-1: Price of LED bulb included with city -1 fitting.
Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary - is >100lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%,THD<20%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. Note- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited Lab before supply of LED fixtures.
Supply and fix in repairs LED 2 X 2 ft backlite surface mounted fitting 36/40 Watts including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete.
S&f fresh exhaust fan metalic body air delivery > 800 CMH , RPM 1200,5 number of blades, AC single phase 230/240 V of size 450 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge.
M&L for breaking the old existing wall and making provn of a round hole for fixing of 450 mm sweep exhaust fan including making good to the disturbed wall/ portion and matching with existing colour.all as specified and directed.
S&F in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed.
S & F pressure die cast aluminium housing LED street light luminaires with IP66 deg. of protection suitable for 60 watt LED fitting duly fixed on 40 mm dia GI mast including 50X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed. Note : The Contractor quoated the rates incl all accessories like suitable GI pipe mast, 50x6 mm thick MS flat, fashner, nut & bolts, suitable length of flexiable wire.
M&L in replacement distribution board TPN 4 way load line DBs IP 43-IK 09 With metal door with provision of MCCB 160 Amp incomer and including 200 Amp rated bus bar,415 Volts and also Iincluding outgoing SP/TP MCBs 10 nos.
Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection single door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.
Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection single door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.
Supply and fix MCB DB SPN 4 way Horizontal, IP - 43 Protection single door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.
M&L MCB SPN 63 Amp "B " curve, 10 kA complete all as specified.
M&L MCB SPN 40 Amp "B " curve, 10 kA complete all as specified.
M&L MCB SP 6 to 32 Amp "B" curve ,10 kA. complete all as specified.
S&F in replacement branded steel sheet MCCB enclosure box along with 160 A, 4 pole 16 ka MCCB, completely connected with copper thimble and with all accessories complete all as specified and directed.
Provn of S &F Wall fan 400 mm 3 blade in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed by Engineer-in-Charge.
Supply and fixing ceiling fans against BER AC single phase 230/240 V of size 1200 mm sweep ,min air delivery 210 CFM with service value 6.0 BEE, 5 star rated BLDC fan including making connection with three core flexible, copper cable pvc insulated of suitable length and marking of fan no with black paint complete all as directed by Engr-in-Charge. Note: BLDC FAN WORK ON REGULATOR
Schedule of Credit
m/s VK construction company
GIAN ENGINEERS
VIJAY KUMAR GUPTA
SHREE RAM BUILD TECH
M/S ANIL KUMAR
M/S MSD & Associate
ANSH VANSH CONSTRUCTION COMPANY
S D Constructions
imran construction company
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .