COMPREHENSIVE MAINTENANCE/REPAIR TO MES MD ACCN AT AYODHYA CANTT UNDER AGE (I) AYODHYA CANTT

Amount

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa of 150 gsm as in roof covering/cladding to wall and rain water gutter fixed with self tapping screws including dismantling plain or corrugated Asbestos cement (Corrugated, semi corrugated etc) sheet complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa of 150 gsm as in roof covering/cladding to wall , fixed with self tapping screws including dismantling plain or corrugated Asbestos cement (Corrugated, semicorrugated etc) sheets in roof covering complete all as specified and directed.

Dismantling of framed work timber scantling 40 sqcm and over in section and in any position complete all as specified and directed.

M&L steel work in tubular trusses/column, railing, grills etc incl special shaped washer etc complete using ERW or induction butt welded tube complete all as specified and directed confirming to IS 1161:1979 grade 240

Material & labour for non skid ceramic coloured tiles 7mm to 8mm thick (Square /rectangular) area of each tile exc 0.11 Sqm and n.exc 0.18 sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement in 15 mm thick screed bed in CM 1:6 for floor tiles complete including dismantling of floor tiles incl cement mortar bedding but not backing removing serviciable tiles to stores complete all as specified and directed by the Engr-in-Charge.

M&L for glazed ceremic coloured tiled in vertical surfaces 450x300x7 mm thick(as approved by Engr-in-Charge) set and jointed in neat cement slurry and pointed in white or colour cement in 10 mm thick rendering in CM 1:4 for wall tiles to match including dismantling of wall tiles incl cement mortar bedding but not backing removing serviciable tiles to stores complete all as specified.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each all as specified.

M&L Rolled MS Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E-250) quality A

Taking down shutter exc 1 Sqm n exc 2.00 Sqm each

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area not exc 1.5 Sqm each all as specified.

S&f 30 mm thick factory made solid WPC(Wood plastic composite) moulded gauged door shutter comprimising of virgin polymer of K values 58-60 (suspension grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)having minimum density of 650 kg/cum and screw withdrawl strength of 1800N (Face) & 900 N (edge)minimum compressive strength of 50 N/mm2 and resistance to spread of flame of class A Category with property of being termite/borer proof,water/moisture proof and fire retardant.WPC to be laminated with PVC Foil of minimum 14 microns thick of approved design plasted with hot melt adhesive on both faces of shutter with wiremesh in any no of division min 4 no pannels with brown wood grain texture including SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm shall be fixed with 15X15 square wpc beading in side rails with screwing 8X28 heat metal zinc coated screws can be remove or fix again after changing of wire mesh when be remove or fix again after changing of wire mesh when needed complete all as specified

S&F 30mm thick factory made solid door with black board core moulded designed with sunmica sheets on both side and edges hydraulic hot pressed pasted with adhesives complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repair 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality one side decorative lamination and other side plain white color to make kitchen cabinet/drawer/cupboard shutters fixed with epoxy coated screws solvent cement adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom shelves inside complete all as specified and directed .

S&F in repair 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality both side plain white color to make kitchen cabinet/drawer/cupboard shutters fixed with epoxy coated screws solvent cement adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom shelves inside complete all as specified and directed .

Supply only 75 mm dia oval shape brass handle fancy type polished bright finish complete all as specified and directed

S&F auto closing hydraulic (soft closing) chrome finish stainless steel hinge openable at 110 degree all as specified and directed.

S&F magnetic catcher of size 20 mm X 50 mm suitable for cupboard shutter complete all as specified and directed

S&F factory made single extruded WPC (WOOD POLYMER COMPOSITE) solid door/window/ceosetory window and other frame/chowkhat of size 50x100mm comprising of virgin PVC polymer of K value 58 to 60 (suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified.

Providing and fixing factory made single extruded WPC wod polymer composite and decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified.

S&F powder coated anodised aluminium window/ventilator shutter sliding type with styles, rails size 40mm x 20mm, frame for chowkat size 30mm x 90mm, fixed glazing, all are made from aluminium anodised section including necessary jointing cleat, glazing clips, rubber packing, anodised aluminium snap beading, screws of suitable size with and including 4mm thick frosted glass /plain glass etc complete as specified. Note:- (i) Two Nos of track to be provided. (ii) In two tracks, shutter with frosted glass /Plain glass and fixed Stainless steel wire mesh on frame. (iii) Thickness of aluminium section shall not be less than 1.00 mm)

S&F powder coated anodised aluminium window and ventilator shutter side/top hung type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips,rubber packing ,anodised aluminium snap beading ,screw anodised aluminium fitting such as peg stays 150 mm long (1 no) hinges type B-21 100 mm long (2 no) suitable handle 1 no complete all as specified

S&F powder coated aluminium (min thickness of powder coating 50 micron) for shutter of door ,window & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings where required including the cost of EPDM rubber/neoprene gaskets required.(Fitting shall be paid seperately ) with extruded builtup standard tubular sections/appropriate Z sections and other section of approved make confirming to IS:733 and IS: 1285 fixing with dash fasteners of required dia and size including necessary filling up gaps at junction i,e at top,bottom and side with required EPDM rubber/neoprene gasket etc Aluminium sections shall be smooth ,rust free ,straight,mitred and jointed mechanically where required including cleat angle,aluminium snap beading for glazing /paneling C.P. brass/stainless stell screws all complete as per architectural drawing and the directions of Enginer-in-charge

M&L for 4.0mm frosted/tinted thick sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 140mm Floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring.

S&F 100mm long stainless steel hinge pin complete all as specified as directed by Engineer-in-Charge

S&F steel tower bolts 200 mm complete all as specified as directed by Engineer-in-Charge.

S&F 125 mm long steel handles complete all as specified as directed by Engineer-in-Charge.

S&F steel sliding door bolt 250mm long with hasp, staple (bolt type) and fixing with four numbers nut and bolts complete all as specified as directed by Engineer-in-Charge.

M&L for Welded steel wire fabric supplied and fixed complete to wood or steel members incl necessary welding n exc 4 Kg complete all as specified and as directed

S&F in repair chromium plated shower roses with or without swivel joints, size 125 mm dia incl fixing to steel pipe or union complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm bore dia bib cock fancy type chromium plated cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified and directed by Engr-in-charge.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type ,screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe of dia 15 mm.

S&F in repair 15 mm bore dia Angle valve/ stop valves with wall flange cast copper alloy fancy type cromium plated screwed down both ends for iron pipe complete all as specified and directed by Engr-in-charge

S&F in repair 32mm bore PVC waste pipe for WHB, complete all as specified and directed by Engr-in-charge.

S & fixed in repair PVC low level flushing cistern 10 Ltr capacity syphonic action type , white with inlet ball valve float and handle including brackets complete and including PVC flush pipe 32mm dia low or high density for low level cistern complete all as specified and directed by Engr-in-charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and S&F 3.0 mm thick plain acrylic sheet in square n exc .5 sqm each pane with rivet/nut bolt up to three storey height complete all as specified and directed by Engr-in-charge

M&L for complete removal of existing treatment and applying two coat of oil bound distemper on walls over a coat of primer and 1 mm thick wall care putty complete all as specified and directed.

M&L for preparing old surface plastered or unplastered and applying one coat of oil bound distemper on walls complete all as specified and directed.

M&L preparation of old painted wooden /wood based materials surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel including cleaning, stopping and rubbing down and removing all dropings tec.

M&L for PCC 1:2:4 type B0 (using 12.5 mm grd stone agg) in roof padding finishing the surface fair & even.

M&L for preparation of old/new surfaces of ceiling and applying two coats of white wash complete all as specified

Jairajyadav security services (BID ID -3456233)

D K Engineers and contractors (BID ID -3456577)

M/S PERFECT CONSTRUCTION CO. (BID ID -3446358)