IMPROVEMENT / RENOVATION OF P-56 (OLD RSDL BUILDING) AT 11 BRD OJHAR

Amount

Dismantling wall/ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets and frame of any description

S&F mineral fibre acoustical suspended ceiling system with Bevelled/Triangular EDGE TILES with 15 mm exposed or inward grid(projected ceiling tile) as approved. The tile should have humidity resistance (RH) of 99%, NRC 0.7 Light Reflectance> 85%, Thermal Conductivity K=0.052-0.057 w/m k. Colour white Fire Performance UK Class 0/Class 1(BS 476 pt-6&7) in module size of 600 x 600 x 19 mm suitable for Green Building application, with Recycled content of 43%. The tile shall be laid on GI grid with 15 mm wide T-section flanges colour white having rotary stitching on all T sections i.e. the main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38 mm and a load carryinbg capacity of 14 Kgs/M2 & minimum pull out strength of 100 Kgs. The T section have a Galvanizing of 90 grams per sqm and need to be installed with Suspension system as required on site of any shape and size. Make : USG/Knauf/Armstrong, Anchor or equivalent.

Demolition cement concrete of any description and in any position not otherwise specification provided for including PCC of existing roof, PCC tiles with screed bed and removing the demolished material outside MoD land at own arrangements of contractor.

Read - M&L for 75 mm cement concrete type B-1, 1:2:4 (20 mm graded aggregate) finished even and fair as in plinth protection. Note :- 10 mm should be provided between wall and plinth protection and should filled with sealing compound grade A, bays should be btwn 2.5 to 3 m, joint filling shall be paid separately under item No. 5.

M&L for Forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound Grade A

M & L hardcore of broken stone gauge exc 63 mm but not exc 100 mm deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc. 4 Sqm each compete all as specified as directed by Engineer -in -charge .

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 Sqm each compete all as specified as directed by Engineer -in -charge .

Forming jambs in CM 1:4 to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete

M & L for powder coated aliminium (minimum thickness of powder coating shall be 50 micron) sliding window with anodized aluminium frame of 3 track of size 92 mm x 32 mm x 1.5 mm thick, with sliding shutters (02 glass and 01 wirecloth) with necessary channels (top rail, bottom rail and style of size 40 mm x 18 mm x 1.1 mm thick) includeing glazing with tinted sheet glass panel 4.00 mm thick and Aluminium alloy wirecloth 0.40 mm nominal dia and avg width of aperture 1.4 mm fitted with necessary joining cleats, glazing clips, locking device one for each shutter, rubber packing, aluminium heading, screws, rawl plugs including all necessary holes/drilling etc, complete all as specified as directed by Engineer-in-charge

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for frame with shutters of fixed windows /partition including fixing pivots and making provision for fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws allcomplete as per architectural drawings and the directions of Engineer-in-Charge

Supply and fix tinted sheet glass 5 mm thick as in aluminium partItion /fixed window

Material and labour for prelaminated particle board 12 mm thick , interior grade, prelaminated both side with decorative choice lamination , fixed with screws to aluminium frame work Note: Beading/rubber packing is included in the rates for aluminium sections above.

Material and labour for providing Aluminium shutter with powder coated (minimum thickness of powder coating shall be 50 micron) frame 88.9 mm x 47.63 mm x 1.6 mm thick and size of shutter with top rail, middle rail and bottom rail and style of size 85 mm x 44.5 mm x 1.56 mm thick with 200 mm size powder coated 2 nos with each leaf, heavy duty powder coated aluminium tower bolt 150 mm long 2 Nos per leaf, 2 nos Heavy duty sluminium powder both side prelaminated particle board/404 mm thick glass pane in the bading, hydraulic door closer, screws etc complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-16

Complete Removal of existing treatment and applying two coat of Oil bound distemper over a coat of primer after smoothing of surfaces complete of wall and ceiling all as specified and as directed by Engineer in charge

M & L for 2 layers of 1.5 mm thick Birla Wall care putty on walls surfaces complete all as specified and as directed by Engr-in-charge.B33

Complete Removal of existing treatment on walls and applying two coat of synthetic enamel paint over a coat of primer after smoothing of surfaces complete of wall and ceiling all as specified and as directed by Engineer in charge

Preparation of new painted surfaces of steel and iron of any description, over 10 cm in width or girth, not otherwise described include for all necessary preparatory work required and applying two coat of synthetic enamel paint over a coat of zinc chromate primer complete all as specified and directed by Engineer in charge.

Preparation of old surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots , removing nails etc., bringing surface to level by applying external wall care putty and applying two coats of exterior Acrylic emulsion (Apex)/Equivalent any colour on walls with and including provision of scaffolding required for the treatment to external surfaces of building with required safety measuers etc complete all as specified and as directed by Engineer in charge

Material and labour for new plastered surface applying two coat of exterior acrylic emulsion (Weather coat) over a coat of exterior acrylic primer of approved colour of ASIAN/Berger/CHOKSEY/STP of equivalent all as specified and as directed.Note: The rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m including all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible.

Taking down cement plaster on brick or stone wall any description including raking out joints, hacking for key, scrubbing down with water etc.compete all as specified as directed by Engineer -in -charge.

M&L for 15mm thick rendering on brick/concrete surfaces on broken edges of chajjas, facia, slab, roof projectioon and any other brick/concrete surface in patch work in CM 1:4 and finishing fair and even without using extra cement with using 2% Integral water proofing compound by wt of cement (Note: Water proofing compound will be measured and paid separately under relevant item) Note: The rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m including all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible.

M&L for applying two coat of damp proof water proofing paint as per manufactures intsruction over roofs, chajjas after plaster repair of Make: Asian Paints/ Berger all as approved and specified.

M&L for providing cement concrete 1:2:4 Type B0 (Using 12.5mm graded stone aggregate) as in bed plate/roof kerb/PCC padding and haunching etc all as specified and directed by Engr in Charge Note : PCC shall be laid in slope and thickness shall be average(minimum average thickness 25mm or as per site requirement for maintaining the slope) as per site including filling in depression by providing concrete bench marks for maintaining th perfect slope to drain out the rain water as directed by Engr-in-Charge. No hand mixing is allowed, mixing shall be at ground floor and mixed materials deposited on roof Manually/ mechanically to achieve the proper strength and workmanship.

M&L providing cement slurry @ 3Kg per sqm on existing roof surface before laying PCC/ Plaster.

Supply only Liquid water proofing compound

M&L Rendering 10mm thick on fair faces of brick work or concrete surface in 1:6 cm finished even and smooth complete all as specified

Preparation of old painted surfaces of wood and wood based of any description, not otherwise described, over 10 cm width or girth including for all necessary preparatory work required and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer in charge

M&L Preparation of new surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots, removing nails etc., and applying two coat of distemper oil emulsion white or tinted on walls over a coat of primer including cornices etc.complete all as as specified and as directed by Engineer in charge

Removing of building materials & debries of any type the rate included i.e loading ,unloading and stacking/spreading etc outside of MD land upto 1 km with own arrangement by Contractor.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including gall quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L Brick work with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1 : 6 all as specified and directed by Engr-in-Charge

Labour only for brickwork (except bricks) straight or curved on plan exc 6m mean radius, built in CM 1 : 6 all as specified and directed by Engr-in-Charge

Taking down existing copper/aluminum point wiring (light/ fan/ socket or power points) complete including (fittings such as switches, ceiling roses, pendents, regulators, sockets, Light fitting etc including wooden battens /casing /capping and conduit etc and making good disturbed surface of walls, ceilings and floors etc. complete all as specified & as directed by Engineer-in-Charge.

Disconnecting electric supply and taking down the existing sub main wiring and making good the disturbed surface complete all as specified and directed by Engineer-In-Charge.

Disconnecting electric supply and taking down the Light fitting any type and making good the disturbed surface complete all as specified and directed by Engineer-In-Charge.

Taking down existing DBs , incldding MCB,s complete all as specified

Point wiring with 1.5 Sqmm (nominal area) PVC ( FRLS) insulated sheathed copper stranded conductor cable run in and including concealed in wall/floor PVC conduit not less than 20 mm as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge.

All as per item no 5 but for One 5 Amps socket point on same/below board with other switches.

All as per item no 5 but for One 5amps switch socket point independent.

Ditto all as per ser Item No -5 above but with two runs of 2.5 sqmm cable and one run of 2.5 sqmm cable as earth wire for one 3 pin socket outlet/power point 15 Amp controlled by one switch .

Supplying and fixing Modular switch , one way, 16 amps, one Module of Make:- Ancher Roma/Legrand/ Crabetree.

Supplying and fixing Modular socket 16 amps-6 pin multipin, 2 Module of Make:- Ancher Roma/Legrand/ Crabetree.

Modular switch one way 6 Amp,1 Module , Make Legrand / Anchor Roma/Crabetree .

Supplying and fixing Modular socket, 6 amps-2/3 pin combined, 2 Module, Make Legrand / Anchor Roma/Crabetree .

Supply and fix 36W LED 5700K Ultra modern recess mounting luminare suitable for armstrong/ grid/ POP ceiling complete with separate electronic driver & high brightness SMD LEDs, complete with connecting accesseries & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting, complete all as specified and directed by Engineer-in-charge. MAKE : CROMPTON , Model No. LCTLRNE-36-FO-CDL or equivalent in Bajaj/HAVELLS.

Supply and fix in repair Sheet metal enclosure for DB’s SPN, with 200 amps rated bus bar , 8 way ,240 volts IP 43 glazed door. Make Legrand Cat. Nos 507621 Or equivalent Make :Siemens/L&T, Complete all as specified & as directed by Engineer-In-Charge

Supply and fix in repair MCB SP 6 to 32 Amps 240 volts 10 KA C series. MCB with separate short circuit indication type Make Legrand Cat. Nos 408595 Or equivalent Make :Siemens/L&T, Complete all as specified & as directed by Engineer-In-Charge

Supply and fix in repair MCB SPN 6 to 32 Amps 240 volts 10 KA. Make Legrand Cat. Nos 408617 Or equivalent Make :Siemens/L&T, Complete all as specified & as directed by Engineer-In-Charge

Supply and fix in repair ISOLATOR 4P 100 Amps 240 volts 10 KA. Make Legrand Cat. Nos 4406522 Or equivalent Make :Siemens/L&T, Complete all as specified & as directed by Engineer-In-Charge

Supply and fix in repair Sheet metal enclosure for DB’s TPN, with 100 amps rated bus bar , 4 way ,415 volts double door. Make :Standard/Legrand/L&T.,Complete all as specified & as directed by Engineer-In-Charge.

M&L wiring for circuit/ sub main wiring of 2x1.5 Sqmm + 1x1.56 Sqmm earth wire, alongwith eart wire PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable on surface/ concealed as required in PVC conduit complete all as directed by Engr -in- Charge.

M&L wiring for circuit/ sub main wiring of 2x2.5 Sqmm + 1x2.5 Sqmm earth wire, alongwith eart wire PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable on surface/ concealed as required in PVC conduit complete all as directed by Engr -in- Charge.

M&L wiring for circuit/ sub main wiring of 2x6 Sqmm + 1x6 Sqmm earth wire, alongwith eart wire PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable oin surface/ concealed as required in PVC conduit complete all as directed by Engr -in- Charge.

Santhi Enterprises (BID ID -3298073)

M/S PRAMOD SURESHCHANDRA AHER (BID ID -3298082)

M/S SAMEER SUBHASH PATANI (BID ID -3293947)