PETTY REPAIR OF MAP, SRE, TOM, SANGAM KUTIR AND TEACHER COLONY AT AGE BR-II UNDER GE (AF) BAMRAULI

Amount

Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc.

M&L for Brickwork with fly ash (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 5 mm thick on ceiling surfaces in cement mortar 1:3 finished even & fair all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in CM 1:4 complete including mixing water proofing compound Note:-Water proofing compound will be measured and paid separately.

Supply only Liquid water Proofing Compound

M&L for Rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in CM 1:6 complete.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified.

M&L for preparing newly plastered surface of wall and applying two coats of oil bound distemper complete.

S&F in repair 75 mm dia PVC floor trap plain with grating including jointing with solvent cement complete all as specified.

M&L for 150mmx 150mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' and setting and jointing in cement mortar 1:1complete all as specified in repairs.

S&F in repair 110mm bore dia PVC (SWR )vent cowl complete all as specified.

S&F in repair 110 mm dia PVC (SWR) bends any radius with oval access door complete all as specified.

S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified.

S&F in repair 75 mm dia PVC (SWR) bends with access door any radius complete all as specified.

S&F in repair 110 mm dia PVC(SWR) plain bends any radius complete all as specified and directed.

S&F in repair PVC (SWR) junction single T bore 110 mm complete all as specified and directed.

S&F in repair PVC (SWR) junction single T with access door bore 110 mm complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all type earth work complete all as specified.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S&F in repair PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all type earth work complete all as specified.

S&F in repair PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, fixed on walls complete all as specified.

S&F in repair Toilet paper Holder fixing to wall complete all as specified. Make:-Jaquar Cat No.ACN-1151N or equivalent of makes as specified in the list of makes.

S&F in repair central Wash Basin Mixer 15 mm Bore with 450 mm long braided hoses complete all as specified and directed

Repair only to CP long body bib taps , pillar tab etc of any make by replacing spindle,nippule ,washer etc at any size etc complete all as specified and directed.

S&F in repair 32 mm brass chrome finish bottle trap for Wash hand basin complete all as specified.

Repair only to wall mixer of any make by replacing L-bends,connecting legs& spindle and, nipples etc complete

S&F in repair Towel Rack 600 mm long with lower Hangers complete all as specified and directed. Make:-Jaquar Cat No.ACN-1181N or equivalent of makes as specified in the list of makes.

S&F in repair Wall mixer with 115mm long Bend pipe ,connecting legs & wall Flange complete all as specified and directed. Make:Jaquar Cat No.CON-281KN or equivalent of makes as specified in the list of makes.

S&F in repair Towel Rail 600 mm long complete all as specified and directed. Make:Jaquar Cat No.ACN-1111NM or equivalent of makes as specified in the list of makes.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed

Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified.

Refixing old steel tubing and connections in new or old position(wall,ceiling,floors etc.) 15 mm bore of pipe

Refixing old steel tubing and connections in new or old position(wall,ceiling,floors etc.) 20 mm bore of pipe

S&F 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line all as specified and as directed by Engineer-in-Charge.

S&F 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line all as specified and as directed by Engineer-in-Charge.

S&F in repair 15 mm size bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.Make:Prayag/Pearl/Cera

S&F in repair 15 mm size Long Body bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.Make:Prayag/Pearl/Cera

S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete.Make: Prayag/Pearl/Cera

S&F in repair 15 mm size bib taps PTMT type any colour high pressure screwed for iron pipe and fixed(Min weight 15mm-90gms) , complete all specified and directed.Make: Prayag/Pearl/Polytuff

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including bracket and pair of rack bolts waste coupling pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed by Engineer-in-Charge.

S&F in repair Bathroom cabinet mirror of hard thermosetting plastic of size 540x340x130 mm fitted with superior quality distortion free 4mm thick mirror, fixed in repairs, complete all as specified and directed.Make- Prayag Cat Part No BA-12 or techno-commerically equivalent model in Jaquar / Cera or as approved by GE

S&F in repairs 15 mm dia brass chromium plated pillar tap long shank with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long screwed shank complete.

S&F in repairs PVC flexible waste pipe 32 mm dia and over for fixing in urinals and wash basin ,kitchen sink complete.

S&F in repair PVC fiber sheet shelf 450x125mm with bracket complete all as specified and directed.

S&F in repair PVC fiber sheet corner shelf with complete all as specified and directed.

S&F CP Swivel shower of for fixing with 15mm pipe.

S&F CP Shower arm 15 mm size, with flange fixed to wall complete all as specified.

S&F in repair brass chromium plated Tumbler holder all as specified as approved by Engr-in-charge. Make:- Jaquar cat part No AKP 35741P or equivalent in makes as specified in PS

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connection complete.

S&F (in Repair) Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device. Make: CERA cat No. S1013119 or equivalent approved makes given under list of makes.

S&F in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx350mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications. Note : Vitreous china wash down water closet (Pedestal Pattern) cat Part No. CURATOR S1013132 S trap 250mm of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications as approved by Enginr-in-Charge.

S&F in repair jet spray with flexible pipe and holding screw other fittings etc complete.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging devices complete all as specified.

S&F in repairs flush handle PVC with adjustable lever and hook for low level flushing cistern complete.

S&F in repairs PVC syphon complete for low level flushing cistern complete all as specified.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete. Make-Prayag/Hindustan/Pearl

S&F in repair PVC Syphon kit suitable for PVC Cistern complete all as specified

Removing and refixing of bottle trap from WHB after cleaning and removing all blockages etc. Complete.

S&F in Repairs PVC Syphon kit suitable for One piece WC Cistern complete

Resecurring of syphon kit by minor adjustment and replaceemnt of syphon washer etc. Complete.

S&F in repair Angle cock, 2 way, with wall flange 15 mm dia including fixing to pipe, fixed in repair, complete all as specified and directed. Make :- Prayag cat no. 6711, techno-commercially equivalent model in Jaquar or Cera.

S&F in repair Health faucet of superior quality ABS body with 15 mm dia 1.25 m long flexible tube and wall hook including fixing complete all as specified and as directed.Make-Prayag/Jaquar/Pearl

S&F in repair waste coupling of 32 mm size chromium plated for glazed ware sink basins, etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed.

S&F in repair waste coupling of 40 mm size brass chromium plated for sink , etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed.

S&F in repair 450 mm long PVC connections 15 mm size with PTMT nuts at both end complete.

S&F in repair stainless soap dish fixed to wall complete all as specified and directed.

S&F in repair 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 g ms) complete.

S&F in repair 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 g ms) complete.

S&F in repair 40 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 g ms) complete.

S&F in repairs cover for HDPE water tank of capacity 500/1000 ltrs rotating type including frame including nut bolt complete.

S&F in repairs CP grating any type 125 mm dia fixed over floor/nahani trap (with hole/without hole) complete all as specified.

S&F in repair 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

S&F in repair 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

Cleaning of HDPE tank of capacity up to & including 500 Litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as directed.

All as per item No. 78 above but capacity of tank exc 500 litre but not exc. 1000 litres

Repairing only for Leakage of Rotational moulded polythene three layer water storage tanks position 500ltrs capacity including disconnecting the tank with rapair the leakage portion using M seal, 2Nos of 20 to 25mm GI union and checked nut etc complete all as specified and directed.

Labour only opening of air lock in toilets/ bath and kitchen but excluding fittings complete all as specified and directed.

S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,including making thread to both ends of pipes for fixing,screwed both ends for iron pipes and fixed.

Stainless steel plate rack / utensils rack of size 900mm x 1200mm x 300mm depth made out ot 0.63mm thick stainlesss steel sheet, fixed to wall with brass screws including provision of necessary fittings / fixtures viz., nuts, bolts and washers of suitable size, the plate shall conform to the sample kept in sample room of AGE B/R Old Cantt, complete all as specified and directed.MAKE:- Prayg Cat NoP-350 or techno-commercially equivalent model in Prayag or Cera.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F in repair 15-20mm(out side dia-20 mm) GI reducer.

S&F in repair 20 mm bore GI Union complete.

S&F in repair 20 mm bore GI Elbow complete.

S&F in repair 20 mm bore GI socket complete.

S&F in repair 15 mm bore GI Tee complete.

S&F in repair 15 mm bore GI Union complete.

S&F in repair 15 mm bore GI Elbow complete.

S&F in repair 15 mm bore GI socket complete.

S&F in repair 15 mm bore 150 mm long Nipple

S&F in repair 15 mmbore 100 mm long Nipple

S&F in repairs GI nipple fully threaded with two numbers check nuts and washers for PVC tank, 100mm long to PVC tank with back nut and washers for inlet and outlet pipe of following sizes :

(a) 15mm bore

(b) 20mm bore

Resecuring or easing & adjusting without taking down door shutter area exc. 1 Sqm but n exc 2 Sqm each complete.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each and making good the disturbed surface complete all as specified.

Taking down shutters of any description exc 1.00 Sqm and n. exc 2.00 Sqm each.

M&L for Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M&L for cement concrete type C-1 (1:3:6) 20mm graded stone aggregate as in bed blocks for fixing hold fasts and fillling of chowkhats etc. all as specified.

M&L for applying two coats of synthetic enamel paint on primed steel surface of any description over 10 cm width or girth complete all as specified.

S&F 35 mm thick factory made 2nd class Hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges offraming plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S&F 35 mm thick flush door shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforcement with MS square tube supplying and fixing in opening as per specification & sketch shown in sketch 8 of SSR part II.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck indie with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fittied in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 100mm long hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F 200 mm size aluminium anodized barrel tower bolts of extruded section and fixed.

S&F 150 mm long aluminium anodised handle fabricated type all as specified and as directed by Engineer-In-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame, glazed with putty or fixed with beads complete.

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in Sqm n.exc 0.50 Sqm in each pane complete.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in Sqm exc 0.50 Sqm in each pane complete.

S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete.

S&F in repair 2nd Class hard wood plain fillets square/ rectangular in section, sectional area exc 6 Sqcm but n.exc 13 Sqcm, wrought and fixed with nails complete

Taking down existing aluminium windows/door exc. 1.50 Sqm and not exc. 4.00 Sqm and re-fixing the same after minor repairs etc. replacement of rubber beading and aluminium strips etc complete all as specified and directed.

S&F in repair 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) ISI marked and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete.

S&F in repair 100mm long hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F in repair 100mm size aluminium anodised handle, fabricated type all as specified and as dierected by Engineer-In-Charge.

S&F in repair 150 mm long aluminium anodised handle, fabricated type all as specified and as dierected by Engineer-In-Charge.

S&F in repair 100 mm long Aluminium anodised barrel tower bolts of extruded section and fixed.

S&F in repair 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed.

S&F in repair 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed.

S&F in repair 300mm size mild steel rat tail rod pattern door springs ISI marked including roller & roller plate etc complete.

S&F in repair 100 mm size 4-lever mild steel mortice lock vertical type with two keys etc complete.

S&F in repair floor door stopper of Aluminium anodised body and tounge anodised with hard drawn steel spring of cover plate length of 150 mm size.

S&F in repair Aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete.

S&F in repair 25 mm dia stainless steel drapery rod cut to size and fixed in position including brackets fixed to wall complete all as directed.

S&F in repair stainless steel end cap suitable for drapery rod of 25 mm dia complete.

S&F in repair 100 mm aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised having width of flap 30mm

S&F in repair Door Seal length of each door seal is equal to width of door fixed to door bottom rail including all fixing arrangement such as screws ,nails etc complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for coloured joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified.

M&L for coloured Glazed ceramic tiles in vertical surface 450x300/300X200 7-8mm thick set and jointed in skirting over 10mm thick rendering in CM 1:3 pointed neat cement slurry and pointed in white or colour cement to match.

M&L for light Shade Vitrified ceramic tiles 10mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.38 sqm, in floors etc. set and jointed in neat cemet slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15mm thick in CM 1:4.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar.

M&L for 20 mm thick Granite black work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:6 complete.

S&F in repair Mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings and brackets (wall to wall or flush to wall) for securing to curtain rod, fixed in repair complete.

S&F in Repair of 18 mm thick Celuka ply both side plain colour fixed with screws/ solvent cement/adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets complete as per specifications and as directed complete all as specified. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)

S&F in Repair of 18 mm thick Celuka ply one side prelam/rigid laminated and other side plain white colour to make kitchen cabinet Shutter/drawer front shutter complete as per specifications and as directed complete all as specified. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material

VIPUL CONSTRUCTIONS (BID ID -3136471)

M.R. ENTERPRISES (BID ID -3137567)

M/S Aquarius Construction (BID ID -3137613)