Interior Renovation works for 6th Floor , Conference wing , NIA Head Quarters Lodhi Road , New Delhi

CEMENT CONCRETE : Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and

shuttering-all work upto plinth level.

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) CUM 10.16 6,812.00 69,209.92

LAMINATED WOODEN FLOORING Providing and laying 8.3mm thick AC5 grade laminate wooden flooring having good castor chair

and furniture resistance strength. Plank dimension to be 1215x195x8.3mm with valinge clock locking system and wax coating for better

sound resistance. Impact and abrasion resistance to be of high grade having class EN 13329. The flooring shall be laid with 2mm thick

underlay and PVC sheet and prevent against moisture and foot taping sound. The item also includes the skirting and any other profiles

required for proper installation.or its equivalent specifications or as per the selection of client and items shall be complete in all respects.

or its equivalent specifications/ size as per the site requirement or as per the selection of client and items shall be complete in all

VITRIFIED TILES : Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement

11.41A mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and

matching pigments etc., complete.

CARPET TILES: Providing and laying Carpet tiles of Yarn type Eco Solution Q® Nylon (Nylon 6) only; Multi-Level Pattern Loop,

manufactured using 100% solution dyeing process, Tiles of size 23cms x 91cms or equivalent as per direction of EIC and site

requirement with SSP® Soil Protection treatment TM or equivalent containing properties of Stain Repel, with Ecoworx® Tile- 100% PVC

Free/ 100% Bitumen Free/ 100% Recyclable - backing system with recycled content, made from thermoplastic polyolefin compound with

reinforcing layer high-performance environments requiring modular flooring, having tufted yarn weight of 542.5 gsm/sqm and average

yarn density of Minimum 9143 oz/cu. yd. or more, Nominal total thickness 5.42 mm minimum, Radiant Panel class 1 rated (ASTM E648),

1.06 M.R. NBS smoke < 450, Pill test -Passed, Anti Static Property less Than 3.5 kv, Texture Appearance Retention Rating of 3.5 for Severe Use, SQM 189.52 2,408.59 456,476.70

Anti Microbial Treatment-Passes (AATCC-174). CRI Green Label Plus is certified for indoor air quality, including fixing/ installation with

Low/ Zero VOC content Adhesive. Impact Sound (ISO 10140-3) 20 dB & Sound absorption (ISO 354) 0.2 Class D.or equilent as per

direction of EIC and site requirement or its equivalent specifications or as per the selection of client and items shall be complete in all

respects. or its equivalent specifications/ size as per the site requirement or as per the selection of client and items shall be complete in

Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum

11.55 height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular

stinger frame work and G.I. Pedestal etc. all complete,

11.54.1 300 mm Finished Floor Height (FFH) Sqm 23.30 5,094.10 118,692.53

2393 1 mm thick Stainless Steel Cover plate grade 304 (3mm Plate) kg 15.00 286.00 4,290.00

TOTAL FLOORING WORKS 354,129.18 749,317.65

2 FALSE CEILING WORKS

5 Digitally signed by AMIT

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm

with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter

2.01 12.45 channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help

of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section

and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish

of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and

also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed,

all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) SQM 350.00 1,355.80 474,530.00

STRETCHED FABRIC CEILING: Supply & installationof fabric false ceiling/ wall formed out with TRANSLUCENT Printed fabric

coverings made out of polyester knitted fabric coated with Polyurethane (PU). The TRANSLUCENT Printed fabric width of 2m, 3m, 4.1m

&5.1m with weight of 200gm/m2, thickness of 0, 3 mm. The appearance of fabric is matt, smooth and uniform with blanq color and light

transmission of 50%. The tear strength of fabric should be accordance to CH: 4,5daN; TR: 6,5 daN. The fire rating should be

accordance to B-S1, d0. The fabric should be humidity resistant and free of carcinogenic substances(CMR) or volatile organic

Compounds (VOC’s). At labeling in accordance with the French decree no. 2011- 321, Oeko-Tex standard100 certified. Fabric should

be installed with approved manufacturer guidelines. It comes with 10- year manufacturer guarantee. The installation of TRANSLUCENT

printed fabric should be dry installation & done at room temperature using CLIPSO PVC, ABS Grippers. Clipso ceiling base to be made

2.03 MR of MS or Wooden frame finishing to a flush finish of tapered and square edges in desired design as per architect specification. Supply of SQM 45.00 6,065.61 272,952.27

LED Lights behind the Fabric Wall/ False ceiling in modules/ PCB with recommended wattage as per manufacturer's standards to give

an effect of ambient lighting. LED spacing/ Pitch should be atleast 73-80mm with beam angle of 170 degree, Colour temperature shoud

be as per design intent 3000K/ 4000K/ 6000K. Wattage of 8-10W/ metre. LED modules/ PCB should be positioned properly to provide

an even light flow, casting noshadows or dark spots. LED Driver Cost included.or its equivalent specifications or as per the selection of

client and items shall be complete in all respects. or its equivalent specifications/ size as per the site requirement or as per the selection

of client and items shall be complete in all respects.

GYPSUM LOUVERED CEILING: 12.5x600x600 high grade, glass-fibre reinforced, acoustic, gypsum panel with acoustic perforation

square 3.5x3.5mm c/c 8.33 type U3. The acoustic ceiling tiles with Strip shall be screw fixed on min 60mm wood or steel furring. The

ceiling with strips tiles are with edge B+ and are pre-painted ready for installation on site. The acoustic celing tile screws, type Torx 15,

with white-painted head are used for screw-fixing. The acoustic ceiling tiles are furnished with a grey (white) absorbent felt backing with

an airflow resistance of 330-460 Ns/m³ (DIN 53887). Colour-White, NCS 0701 Y24R, gloss 5 (standard) or re-paintable at site with water

2.06 MR based acrylic paint. Closest match for repainting: NCS 0700/RAL 9003. Paint Type - Waterbased acrylic emulsion paint including SQM 59.00 8,604.70 507,677.12

titanium for hygienic indoor climate. Light Reflection: 69.2% according to DIN Norm 5036.Acoustic Property - αw: 0.95; NRC: 0.90.Fire

Class - A2-s1,d0 .Suspension - The acoustic celing tiles must be screw fixed to furring of 22 mm wood or 60mm steel battens at 300 mm

c/c.or its equivalent specifications or as per the selection of client and items shall be complete in all respects. or its equivalent

specifications/ size as per the site requirement or as per the selection of client and items shall be complete in all respects.

TOTAL FALSE CEILING WORKS 474,530.00 780,629.39

3 WALL FINISHES WORKS

6 Digitally signed by AMIT

GLASS PARTITION (FIXED GLASS PARTITION WITH 10MM GLASS): Supply & Insallation of partition make sleek series aluminium

profile with Clip- on / U-Section of size 30mm x 21mm with 2.5mm Wall thickness in matt black/ natural Alu finish with suitable gaskets

for insertion with 10mm thick clear toughened glass. It consists of two way Polycarbonate I profiles, 90 Degree L Junction and T

Junction profiles. Transparent profile to be applied on the glass shim for glass wall systems Supplied with double sided adhesive tape.

3.01 MR Profile to be inserted in the joint instead of sealing to give continuity glas effect and suitable fasteners for fixing profiles including or its SQM 22.80 4,372.88 99,701.64

equivalent specifications or as per the selection of client and items shall be complete in all respects. installation charges. or its

equivalent specifications/ size as per the site requirement or as per the selection of client and items shall be complete in all respects.

FRAMELESS HINGED GLASS DOOR: Supply & Insallation of door make sleek series Door Profile frame of size 45X60x45mm along

with necessary seals, door to be fixed on Hinges & Lock with lever handle for rebated door in matt black/ natural Alu finish with Top

Mounted Door closer with Slide Channel on Top and saddle plate for fixing on the Glass door suitable for 10mm thick clear toughened

glass and necessary seals to be provided all around the door frames. Hardwares should match colour of door frames and profiles. All

necessary hardware should be in same colour including Hinges and minimum 3 hinges are required in each door depending on door

3.02 MR size. Necessary Hardwares includes Lock with Lever Handles, door handles ,Seals, Hinges & door closers as per Architect choice. sqm 17.76 10,015.30 177,871.78

Installation rates should be inclusive and vendors shall provide end to end solution. Lever handle should be Solid in aluminum alloy in

curved/square shape as per architects choice Finish: Aluminium Anodized (Silver) - Black matt finish.Item should be complete including

all hardwares Handles etcor its equivalent specifications or as per the selection of client and items shall be complete in all respects. or

its equivalent specifications/ size as per the site requirement or as per the selection of client and items shall be complete in all respects.

WOODEN DOOR FRAMES : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed

9.1 and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

3.03 separately).

9.1.1 Second class teak wood CUM 0.15 142,949.70 21,228.03

FLUSH DOOR SHUTTERS : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,

9.21 core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or

3.04 cross bands and face veneers on both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws SQM 24.00 2,392.65 57,423.60

WOODEN LIPPING: Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door

shutters (over all area of door shutter to be measured).

Providing and Fixing 22x922mm D-type Handle for Wooden Hinged Door Material : Stainless Steel. Finish : Satin Stainless Steel (SSS).

3.06 MR of approved make and model all complete as per the direction of Engineer-in-charge. Each 22.00 8,549.00 188,078.00

Providing and Fixing SS Mortise Lock Body with handle SB/TB for door thickness 25-50mm for Bathroom Hinged Door of approved

make and model all complete as per the direction of Engineer-in-charge.

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and

3.08 9.53 embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal Each 60.00 228.85 13,731.00

Providing and Fixing Dead lock Back set- 50mm with Key Hole of approved make and model all complete as per the direction of

Engineer-in-charge.

Providing and Fixing 60mm SS Cylinder one side knob and one side regular key (3 key) for wooden doors of approved make and

model all complete as per the direction of Engineer-in-charge.

Providing and Fixing Mortise Handle-Tube for wooden Bathroom Hinged doors of approved make and model all complete as per the

3111 MR direction of Engineer-in-charge. Each 0.00 1,445.17 0.00

7 Digitally signed by AMIT

Providing and Fixing Door closer with Slide Arm and Hold open function, Max Door width 950mm, 5,00,000 Cycle Tested for wooden

Hinged doors of approved make and model all complete as per the direction of Engineer-in-charge.

Providing and Fixing SS Door Stopper for wooden Hinged doors of approved make and model all complete as per the direction of

Engineer-in-charge.

Providing and Fixing 10 inch SS Tower bolt for wooden Hinged doors of approved make and model all complete as per the direction of

Engineer-in-charge.

GLASS SIDE SLIDING FOLDING SYSTEM - 4+4 PANELS: Providing and Fixing Glass Side Sliding Folding System including, Glass,

3.15 MR Fittings,Top-Bottom track,Seal and Lock of approved make and model all complete as per the direction of Engineer-in-charge. SQM 12.00 19,043.18 228,518.16

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-

blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having

3.16 MR minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 SQM 20.28 1,140.91 23,137.64

kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors).

ACOUSTIC PANELLING : Providing and fixing woodwork 16mm thick forming 600x600 mm tiles with Tegular edge. Perforation in the

panel will be of 6mm/8mm/10mm or as per architect approval, the wooden ceiling panels to be backed with black acoustic fleece with

NRC of 0.4 (NRC 0.8 with 50mm GW of 48kg/m3). The grid should be of 24mm/15mm wide T - section flanges color Black. The main T

runner with length and size of 24X38mm/ 15X38mm made from .30mm thick sheet spaced at 1200mm Centre to Centre and cross T of

3.17 MR size 24X25mm / 15X25 made of .3mm thick of 1200mm long spaced between main T at 600mm center to centre to form a grid of SQM 30.00 2,962.27 88,868.18

1200X600mm and second cross T of length 600mm and size 24X25mm/15X25mm made of 0.30mm sheet to be interlocked at middle

of the 1200X600 mm panel to form grid of 600X600mm and wall angle of size 19X20 The Wooden acoustic panel laminated in desired

shade as per Engineer In charge / Architect’s approval or its equivalent specifications/ size as per the site requirement or as per the

selection of client and items shall be complete in all respects.

GYPSUM BOARD PARTITION: Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including

providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both

side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor

and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener

or metal screws with nylon plugs and the studs 48mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed

vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at

spacing of 450mm centre to centre, and fixing of boards to both side of frame work by 25mm long dry wall screws on studs, floor and

ceiling channels at the spacing of 300mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid

through cracks, M.S. fixing channel of 99mm width (0.9mm thick having two flanges of 9.5mm each) to be provided at the horizontal

joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with

recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of

primer suitable for board as per manufacturer's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to

IS: 2095: part 3 (Board with BIS certification marks)

ACRYLIC SOLID SURFACE CLADDING : Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab &

celling, cladded with Acrylic Solid Surface 6mm thick sheets straight fabricated on a single face, finished in matte finish, pasted with

industrial grade silicon on a robust substrate. Substrate shall be with suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per structural

3.20 MR requirement & duly painted with anti-rust red oxide coating and covered with 12 mm thick water proof ply as per the design and SQM 10.00 9,210.00 92,100.00

dimensions approved. The proposal includes the cost of preparing appropriate substrate surface over the civil structure provided, along

with material cost & installation / fixing on straight walls etc. FOR ALL WALL CLADDING, TABLE TOPS ETC. COMPLETE or its

equivalent specifications or as per the selection of client and items shall be complete in all respects.

8 Digitally signed by AMIT

ROLLER BLINDS : Providing & supplying of Window Blinds as per the approved sample in required shade and style consisting, of

Roller Blinds comprising of optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m,

Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .The tear resistance

should be complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for quick,easy and safe

installation,moulded plastic with steel spring support and inserted into the tube end. It shall be driven by a ball chain pulley with ball chain

and can be positioned at right side or left hand side of the Shade. The Shade when lowering or raising, shall be automatically locked in

position upon release of the ball chain by means of a built in friction lock.Universal clutch for left and right hand operation.Chain Gear

Ratio of 1.75:1.The END PLUG shall be molded of plastic witha steel location pin. The plug shall be inserted into the tube end. (Opposite

to the Drive Unit) for ease of installation. TheSUPPORT BRACKETS shall be of coated steel & provided with covers and used in right

3.21 MR hand or left hand positions differentiated by the acceptance of the of the rectangular drive unit support or the round idler plug pin.Can SQM 65.00 1,849.00 120,185.00

beinstalled (a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess. The Bracket should be protruding outside maximum of80mm.The

ROLLER TUBE shall be of extruded aluminum with 37mm internal diameter & skin thickness of 1mm and shall incorporate a key way

integral with the tube to accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The

BALLCHAIN shall be 2mm diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on 6mm pitch to form an endless

ballchain.It is used for raising or lowering action of the shades.hall be suitable for sill, face or side facing. Cord Equalizer shall be

injection melded from impact modified acrylic with a high flexural modulus or its equivalent specifications/ size as per the site

requirement or as per the selection of client and items shall be complete in all respects.

PELMET: Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed three layer or graded plain wood particle board medium

density grade I, ISi marked and conforming to IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303

3.22 9.42 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. RM 27.00 600.55 16,214.85

flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75

mm long etc. all complete.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up

6.13 to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

13.4 12 mm cement plaster of mix :

3.26 1:4 (1 cement: 4 coarse sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,

3.28 Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives

13.48A.1 New work (Two or more coats applied @ 1.43 litre/10 sqm) over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm 430.00 181.25 77,937.42

PLY: Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved primer on one face, and

3.29 fixed on wooden/ steel frame work, complete as per direction of Engineer-in-Charge

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type SQM 150.00 1,224.65 183,697.50

4MM THICK MDF BOARD: Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved

3.30 MR primer on one face, and fixed on wooden/ steel frame work, complete as per direction of Engineer-in-Charge

4mm thick MDF Board SQM 75.00 270.00 20,250.00

9 Digitally signed by AMIT

FRAME: Providing and fixing metal system up to ceiling height, which includes frame work made of special section power pressed/ roll

form G.I. sheet with zinc coating of 120 GSM, consisting of U track 52mm wide having equal flanges of 30mm and 0.55mm thick (Base

metal thickness) fastened to the floor slab and ceiling soffit using rawl plugs with screw at 600mm centers, with first & last fixing point at

3.31 MR not greater than 50 mm from either end. Boral C studs 50mm wide having one flange of 34mm, other flange 36mm, lip size 6 mm and SQM 252.80 759.00 191,875.20

0.55mm thick installed perpendicularly within the flanges of floor and ceiling channels located directly opposite to each other at not more

than 610mm centers. Maintain 5 to 10mm gap between C Stud and web of U Track. or its equivalent specifications or as per the

selection of client and items shall be complete in all respects.

VENEER: Providing & fixing 4mm thick coir veneer board ISI marked IS: 14842, plain lining with necessary screws, priming coat on

unexposed surface etc., complete including polishing , finishes complete in all respects

THERMAL INSULATION: Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having

3.33 12.57 density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in SQM 250.00 358.50 89,625.00

position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge.

3.34 Plain/Decorative WALLPAPER or its equivalent specifications or as per the selection of client and items shall be complete in all

10 Digitally signed by AMIT

WOODEN MOULDING: Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with

3.35 MR iron screws, plugs etc. complete MDF Finished of size as per the site requirements or is equivalent specifications or as per the selection Metre 150.00 16.00 2,400.00

of client and items shall be complete in all respects.

TOTAL WALL FINISHING WORKS 932,769.97 1,371,805.09

4 MISCELLANEOUS WORKS

MODULAR KITCHEN - UNDER COUNTER STORAGE CABINETS:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient

number of drawers made of 18 mm thk. ISI Marked comm. ply, all ply to be laminated with 0.8 mm laminate.All shelves should be

supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia

shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high

4.01 MR gloss acrylic of approved. The cabinet boxes of floor units will be supported by 100mm height vertical adjustable legs which will be SQM 6.30 6,406.00 40,357.80

covered with PVC skirting in brushed aluminum finish attached by hardware of skirting. The unit shall be fixed to the floor/ wall/ slab

using metal screws of appropriate size and rawl plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be

considered for measurement and payment. Cabinet boxes size would be varies from 400x560x710MM to 1000x560x710MM (approx.)

and join together or its equivalent specifications or as per the selection of client and items shall be complete in all respects.

MODULAR KITCHEN - OVERHEAD STORAGE WALL UNITS:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient

number of drawers made of 18 mm thk. ISI Marked comm. ply. All ply to be laminated with 0.8 mm laminate.All shelves should be

supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia

4.02 MR shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high SQM 4.20 5,125.00 21,525.00

gloss acrylic of approved. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front

face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet boxes size

would be varies from 400x560x710MM to 1000x560x710MM (approx.) and join together as per site requirements etc. or its equivalent

specifications or as per the selection of client and items shall be complete in all respects.

4.02A MR Providing and fixing of Innotech with metal sides and quadro channels Each 5 3,548.00 17,740.00

4.02B MR Providing and fixing baskets Each 5 4,013.00 20,065.00

WATERPROOFING: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C.,

kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming

to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm

4.03 22.3 cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off SQM 40.80 769.60 31,399.68

junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with

bitumen @ 1.7 kg/sqm).

SHOP DRAWINGS: Preparation of complete set of shop drawings including finishing, MEP services, details, design calcualtions etc.

4.04 MR and any other details as and when desired by Engineer Incharge/ client. A qualified professsional for the purpose shall be appointed LS 1.00 180,000.00 180,000.00

after due appproval from Engineer InCharge.

DISMANTLING: Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of

unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge.

11 Digitally signed by AMIT

Providing and fixing Toilet cubicals with the following specifications:

Thickness of Compact Laminate: 18 mm

Color of HPL Boards: As approved by Engineer-in-charge

Size of Cubicle: As per drawing

Door Size: 1995mm (H) x 610mm (W)

Divider Size: 1995mm (H)

Overall Height Of Cubicle: 2100mm (Including boom Gap of 100mm)

Accessories: Standard - Merino Make Stainless Steel - 304 Grade accessories)

a) SS "U" Channel

c) SS Coat Hook

d) SS Privacy Thumb turn c/w Occupancy Indicator

e) SS Door Knob

f) SS Hinges with Cover

g) SS Shoe Box Leg 18mm - 316 Grade

h) Rubber Lining for Groove

i) S.S.Screws 304 G & P .V.C Wall Plugs or its equivalent specifications or as per the selection of client and items shall be complete in

Providing and fixing Urinal partitions with the following specifications

Thickness of Compact Laminate : 12 mm

Color of HPL Boards: As approved by Engineer-in-charge

Size of UMP : 1200 mm (W) X 500 mm(H) AND 900 mm (W) X 450 mm(H)

Overall Height Of Cubicle : 1850 mm (Including bottom Gap of 650mm)

Accessories: Standard – Merino Make Stainless Steel - 304 Grade accessories)

a) Right Angle Brackets

b) S.S.Screws 304 G & P.V.C Wall Plugsor its equivalent specifications or as per the selection of client and items shall be complete in all

TOTAL MISCELLANEOUS WORKS 31,399.68 495,101.94

12 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

DSR NO TOTAL AMOUNT TOTAL AMOUNT

DSR NO TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE

2023 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN MIXER

MR 1 (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY) or its equivalent EACH 6 12178.79 73072.73

specifications or as per the selection of client and items shall be complete in all respects.

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE: 630x460x130mm or

MR 2 its equivalent specifications or as per the selection of client and items shall be complete in all EACH 6 11473.48 68840.91

Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING 32MM-

MR 3 FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP or its equivalent EACH 6 1974.85 11849.09

specifications or as per the selection of client and items shall be complete in all respects.

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL PARTITION)

32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES & WALL FLANGE or its

equivalent specifications or as per the selection of client and items shall be complete in all

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL HUNG

WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES SET, SIZE:

375X520X400 MM or its equivalent specifications or as per the selection of client and items shall

be complete in all respects.

Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE or its equivalent

specifications or as per the selection of client and items shall be complete in all respects.

Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL FLANGE

MR 7 or its equivalent specifications or as per the selection of client and items shall be complete in all EACH 12 4231.82 50781.82

Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH ADJUSTABLE

MR 8 WITH WALL FLANGE 15mm or its equivalent specifications or as per the selection of client and EACH 6 4231.82 25390.91

items shall be complete in all respects.

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH 8mm

MR 9 DIA 1.2 METER LONG FLEXIBLE TUBE AND WALL HOOK as per the selection of client and EACH 6 2327.50 13965.00

items shall be complete in all respects.

Supply, Installation, Testing and Commisiong of PNEUMATIC SINGLE PIECE SLIM CONCEALED

CISTERN BODY WITH INSTALLATION KIT & “S-TYPE” DRAIN PIPE CONNECTION SET FOR

MR 10 WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE) or its equivalent specifications or as per EACH 6 7053.03 42318.18

the selection of client and items shall be complete in all respects.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28 complete.

17.28.2 Flexible pipe

Providing and fixing 60x150 mirror of superior glass (of approved quality) complete with 6mm thick

hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality

13 conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 12 574.30 6891.60

Digitally signed by AMIT

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun)

iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand: 6

17.61 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing in

cement mortar 1:4 (1 cement : 4 coarse sand) :

18.76 Cutting holes upto 30x30cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks each 6 416.80 2500.80

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching

surface after housing G.I. pipe etc.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &

cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.2 17 20mm nominal outer dia pipes METRE 50 335.00 16750.00

18.7.3 25mm nominal outer dia pipes METRE 50 401.55 20077.50

18.7.4 32mm nominal outer dia pipes METRE 20 518.75 10375.00

18.7.5 40mm nominal outer dia pipes METRE 20 702.95 14059.00

18.7.6 50mm nominal outer dia pipes METRE 20 934.15 18683.00

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &

cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps

at 1.00 m spacing.

18.8 This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting

chases and making good the same including testing of joints complete as per direction of Engineer

Concealed work including cutting chases and making good the walls etc.,

18.8.1 15mm nominal outer dia pipes METRE 50 497.80 24890.00

18.8.2 20mm nominal outer dia pipes METRE 30 537.60 16128.00

18.8.3 25mm nominal outer dia pipes METRE 20 627.25 12545.00

18.8.4 32mm nominal outer dia pipes METRE 10 739.30 7393.00

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards

19 and weighing not less than 690 gms.

18.51.1 15 mm nominal bore EACH 1 798.95 798.95

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil,

waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary

specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),

reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean

outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside

duct / under floor & basement ceiling / external work etc. including chase cutting as required,

excavation and back filling in all kind of soils, suspended from floor under false ceiling or

20 embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of

shuttering for proper completion of the work, breaking and making good the walls and floors etc.

after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.

Digitally signed by AMIT

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5

mm slotted angle. The cost will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-

charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 100 536.00 53600.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 20 416.00 8320.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/

Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket,

couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc.

MR 21 cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete

MR 22 in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 13 536.00 6968.00

MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 13 726.00 9438.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover

with screws and other required fitting complete as required.

Supply, Installation, Testing and Commisiong of HIGH FLOW SINGLE LEVER CONCEALED

MR 25 DIVERTOR FOR BATH & SHOWER or its equivalent specifications or as per the selection of client EACH 0 14106.06 0.00

and items shall be complete in all respects.

Supply, Installation, Testing and Commisiong of SPOUT FOR BUILT IN BATH/ SHOWER MIXER

MR 26 or its equivalent specifications or as per the selection of client and items shall be complete in all EACH 0 7899.39 0.00

Supply, Installation, Testing and Commisiong of OVERHEAD SHOWER 350x350MM ROUND

EDGE SQUARE HEAD SINGLE FLOW (BODY & FACE PLATE STAINLESS STEEL WITH

MR 27 CHROME PLATED) WITH RUBIT CLEANING SYSTEM or its equivalent specifications or as per

the selection of client and items shall be complete in all respects.

Supply, Installation, Testing and Commissioning of 15 litre geyser or its equivalent specifications or

MR 28 as per the selection of client and items shall be complete in all respects.

MR 29 Supply, Installation, Testing and Commisiong of SOAP DISH HOLDER EACH 6 4392.00 26352.00

MR 30 Supply, Installation, Testing and Commisiong of TUMBLER HOLDER EACH 0 4309.00 0.00

Supply, Installation, Testing and Commisiong of TOWEL RACK 600MM LONG WITH LOWER

MR 32 Supply, Installation, Testing and Commisiong of ROBE HOOK EACH 1 2045.00 2045.00

Supply, Installation, Testing and Commisiong of TOILET ROLL HOLDER WITH COVER or its

MR 33 equivalent specifications or as per the selection of client and items shall be complete in all EACH 6 4978.00 29868.00

MR 34 Supply, Installation, Testing and Commisiong of TOWEL HOLDER EACH 6 3336.00 20016.00

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx.

size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption),

17.80 35 having water inlet from back side, including fixing to wall with suitable brackets all as per

manufacturers specification and direction of Engineer-in-charge

Digitally signed by AMIT

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I.

17.1 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and

36 making good the walls wherever required : Each 1 6945.60 6945.60

17.10.1 Kitchen Sink with Drain Board

17.10.1.1 510 x1040 mm bowl depth 250 mm

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC conduit,

1.10 with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface

1.55 / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single

A.3 1.12 core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS Metre 2125 334.00 709750.00

PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 120 122.00 14640.00

1.24.5 6 pin 15/16 amp socket outlet Each 14 197.00 2758.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

A.6 1.26 excluding modular plate as required. Each 20 40.00 800.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

Supply and fixing 20A, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth,

metal enclosed plug top alongwith 20A "C" curve, SP, MCB, in sheet steel conclosure, on

3 2.18 surface or in recess, with chained metal cover for the socket outlet and complete with Each 4 1621.00 6484.00

connections, testing and commissioning etc. as Required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 20 233.00 4660.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 10 439.00 4390.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 60 1005.00 60300.00

Digitally signed by AMIT

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 60 1365.00 81900.00

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

C.1 KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor

armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

e) 3.5 C x 35 Sqmm XLPE cable RM 50 378.00 18900.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

D.2 connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual

current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing

40 DB complete with connections, testing and commissioning etc. as required

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral

D.4 2.4 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/ RCCB/ Isolator)

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supply, installation, testing & Commissioning of Specific Backbox for Carpet for Floor Box

along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and

E.1 MR single cable outlet/ glavanized steel, paint RAL 7031 for floor box . The item should be Set 2 12436.46 24872.92

complete in all respects

Supply, installation, testing & Commissioning of Specific Backbox for Wooden Flooring for

Floor Box along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for

E.2 MR headband and single cable outlet/ glavanized steel, paint RAL 7031 for floor box. The item Set 4 6437.05 25748.19

should be complete in all respects

Supplying and fixing following modular switch / socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 5 148.00 740.00

Digitally signed by AMIT

MR Providing and fixing min 2 mm thick steel sheet factory fabricated post galvanized raceway

with internal partition/compartmentized of the following sizes including providing removable 3

mm thick GI cover, knock out holes and fixing accessories earthing with 8 SWG copper earth

wire complete as required including floor supports, bends, access boxes (Including of junction

boxes), tap off boxes and cross over as per specification and site requirement.

MR 150-300 mm wide raceway or as per site RM 100 1140.54 114054.20

MR 75-150 mm wide raceway or as per site RM 100 852.17 85217.20

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.11 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 150 47.00 7050.00

surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed

E.12 conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S.

cable trays of perforation of not more than 17.5% in convinient sections, joined with connectors

4.1 suspended from the cieleing with MS suspenders including bolts and nuts painting suspenders

etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 6 1137.00 6822.00

Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe of SET 0 13838.00 0.00

2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for connections etc. as

Providing and fixing 25mm x 5mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. Metre 200 70.00 14000.00

G PANEL BOARDS

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick CRCA

sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors fabricated

from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear

access for cable alley and with segregated bus-bar chamber with tinned aluminium bus bar

and including supplying and fixing following switchgears, meters and accessories, inter-

connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:or its equivalent specifications or as per the

selection of client and items shall be complete in all respects.

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

G.1 MR detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 100 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 250 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

Digitally signed by AMIT

(a) 63 Amps, TPN, MCB -3 Nos.

(b) 40 Amps, TPN, MCB - 3 nos

Panel complete as above Each 0 93916.42 0.00

G PANEL BOARDS

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick CRCA

sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors fabricated

from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear

access for cable alley and with segregated bus-bar chamber with tinned aluminium bus bar

and including supplying and fixing following switchgears, meters and accessories, inter-

connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:or its equivalent specifications or as per the

selection of client and items shall be complete in all respects.

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 125 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB+ ELCB -2 Nos.

(b) 40 Amps, TPN, MCB + ELCB - 2nos

Panel complete as above Each 1 102226.60 102226.60

Supply, Installation, Testing and Commissiong UPS of required capacity with True Online

Double Conversion UPS 3Phase Input - 3Phase Output in Parallel Redundant N+1

Configuration (2 UPS with one pool battery bank in parallel) IGBT Based Rectifier and IGBT

Based Inverter Batteries of suitable capacity/ Voltage, SMF Amararaja/Exide with minimum

VAH capacity suitable for 30 minutes backup with each ups Along with Accessories Rack,

MR Interlinks, SFU, Parallel Kit, DC Cable Upto 10 /or as per site requirement Meters complete in KVA 10 24489.00 244890.00

all respect as per the directions of the engineer in charge. UPS should have availability of Input

/Output isolator, Inbuilt manual bypass along with phase sequence corrector. Unity PF

(Approx) .UPS Efficiency shall not be less than 90% from 25% to 100% Load or its equivalent

specifications or as per the selection of client and items shall be complete in all respects.

Total of Electrical items 1430920.00 615909.11

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR HVAC TOTAL

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT

EM 2018 DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors

for above 14 HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

1 1.0 required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C hp 48 16415.00 787920.00

ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER

not less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

2 2.0 single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree

C WB temperature.

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T"

4 4 Joints i.e. Refnet Joints/ Header with Insulation for refrigearnt piping

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

5 5 complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

5.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 40 245.00 9800.00

5.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 160 331.00 52960.00

5.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 40 466.00 18640.00

5.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 160 588.00 94080.00

Digitally signed by AMIT

5.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 707.00 35350.00

5.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 865.00 43250.00

5.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 1022.00 20440.00

5.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 1108.00 22160.00

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

Supply,installation,testing and commissioning of PVC drain water with necessary clamps,

8 MR fittings such as bends tees etc. and duly insulated.

9 VOLUME CONTROL DAMPER

a Supply, installation, testing and commissioning of GI volume control duct damper complete SQM

16.13 with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications 4 7046.00 28184

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal

rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers,

16.12.1 vanes, hangers, supports etc. as per approved drawings and specifications of following sheet

thickness complete as required.

a 16.12.1.1 Thickness 0.63 mm sheet SQM 10 1080.00 10800

b 16.12.1.2 Thickness 0.80 mm sheet SQM 5 1263.00 6315

c 16.12.1.3 Thickness 1.00 mm sheet SQM 4 1381.00 5524

d 16.12.1.4 Thickness 1.25 mm sheet SQM 2 1836.00 3672

Diffusers & Grills

11 Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium SQM 45525

volume control dampers as per specifications.

12 Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but SQM 59100

without volume control dampers complete as required

13 Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with SQM 36552

aluminium volume control dampers with anti smudge ring & removable core.

14 Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium SQM 24363

without volume control dampers with anti smudge ring & removable core.

Digitally signed by AMIT

15 Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed

cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for

16.23 Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile

rubber tape insulation complete as per specifications and as required.

SITC of Split AC of 02 T with min 03 star rating along with timer or its equivalent specifications

or as per the selection of client and items shall be complete in all respects.

Total HVAC WORKS 1796041.00 318141.92

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - DATA and VOICE WORKS

S NO Description UOM Qty Rate DSR Amount Non-DSR Amount

A. UTP Components for Data

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

1 (DSR 1.53.1) Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 METRE 1415 57.00 80655.00

MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, Blue or its equivalent

2 MR specifications or as per the selection of client and items shall be complete in all Nos. 60 450.00 27000.00

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1 m (3 ft) for

information outlet (I/O) to end user device connectivity.High Speed Gigabit 24AWG

3 MR U/UTP Patch Cord Blue, LSZH, C6, 2M or its equivalent specifications or as per the Nos. 21 400.00 8400.00

selection of client and items shall be complete in all respects.

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity. (Rack end), High Speed

4 MR Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M or its equivalent Nos. 16 950.00 15200.00

specifications or as per the selection of client and items shall be complete in all

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Data Active or its equivalent

5 MR specifications or as per the selection of client and items shall be complete in all Nos. 5 4800.00 24000.00

SITC of 04 core OM4 Multimode fiber orange color 50/125, minimum bending radius

6 MR 15x OD or its equivalent specifications or as per the selection of client and items shall RM 50 229.17 11,458.33

be complete in all respects.

SITC of OS2 G.652.D 1-fibre, buffered, LC Duplex, LC to pigtail, 1m. or its equivalent

7 MR specifications or as per the selection of client and items shall be complete in all Set 2 247.50 495.00

SITC of 42U Rack or its equivalent specifications or as per the selection of client and

items shall be complete in all respects.

Supply , Installtion , Testing and Comissioning of Single Port British Style Shuttered

9 MR Face Plate white for I/O fixing at user side or its equivalent specifications or as per Nos. 40 147.00 5880.00

the selection of client and items shall be complete in all respects.

Supply , Installtion , Testing and Comissioning of 4 Port British Style Shuttered Face

10 MR Plate white for I/O fixing at user side or its equivalent specifications or as per the Nos. 10 275.00 2750.00

selection of client and items shall be complete in all respects.

11 MR 200 Pair MDF Box with mounting Frame Nos. 1 11666.00 11666.00

12 MR 10 Pair Krone Module Nos. 2 900.00 1800.00

13 MR 25 Pair Riser Cable Mtr. 5 1253.00 6265.00

GRAND TOTAL (A+B+C+D+E) 80655.00 163599.33

GRAND TOTAL (A+B+C+D+E) 80655.00 163599.33

24 Digitally signed by AMIT

S No Description UOM Qty Rate Non DSR Amount

A. Active Component for Data, Wifi

1 Supply instllation testing and commissioning of 24 port POE switch Nos. 1 109772.00 109772.00

2 Supply, Installation, Testing & Commissioning of SFP Modules min 1G. Nos. 2 11484.00 22968.00

SITC of wifi access points or its equivalent specifications or as per the selection of client

and items shall be complete in all respects.

SITC of WIFI Controller or its equivalent specifications or as per the selection of client

and items shall be complete in all respects.

Providing and laying of LC- LC multimode OFC type patch cord for data and voice. or

its equivalent specifications or as per the selection of client and items shall be complete

6 in all respects.

Supply instllation testing and commissioning of 24 port Non POE switch Nos. 1 75800.00 75800.00

Total : A - Active Component for Data, Wifi 396363.00

25 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - CCTV

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

A. CCTV DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of min 2MP IR IP H.265 Vandal

Proof Dome camera with 1/2.7” CMOS Motorized vari-focal, Smart IR, up to

40m; Smart IR, IR On/Off Control Auto/Manual, Focal Length 2.7 mm–13.5 mm,

AI Analytics Line Crossing; Area Crossing; Area Enter/Exit Detection; Motion

Detection; Region of Interest, Video Compression H.265+; H.264+; H.265;

H.264; H.264B; MJPEG, Resolution 2592×1944(2592×1944);

VGA(640×480); CIF(352×288/352×240), BLC; HLC; WDR(120dB), BIS

CE-LVD: EN62368-1 CE-EMC: Electromagnetic Compatibility Directive

2014/30/EU; FCC: 47 CFR FCC Part 15, Subpart B; On Vif Complied or its

equivalent specifications or as per the selection of client and items shall be

complete in all respects.

Supply, Installation, Testing and Commissioning of min 8 Ch Embedded

Network Video Recorder with2-channel VGA, 2-channel HDMI video output, AI

disabled: 384 Mbps incoming, 384 Mbps recording and 384 Mbps outgoing AI

enabled: 200 Mbps incoming, 200 Mbps recording and 200 Mbps outgoing,

Smart H.265+; H.265; Smart H.264+; H.264; MJPEG, HTTP; HTTPS; TCP/IP;

2 MR IPv4/IPv6; RTSP; UDP; SNMP; NTP; DHCP; DNS; SMTP; UPnP; IP Filter; Nos 1 33311.00 33311.00

PPPoE; FTP; DDNS; Alarm Server; IP Search Multicast; P2P; Auto

Registration, ONVIF or its equivalent specifications or as per the selection of

client and items shall be complete in all respects.

SITC of SSD Hard Disk Drive 8TB, 24/7 surveillance category Only complete etc

3 MR as required.etc.all complete. or its equivalent specifications or as per the Nos 1 21140.00 21140.00

selection of client and items shall be complete in all respects.

SITC of 43" Professional Ultra HD Display Panel, 4K UHD (3840x2160)

Resolution, Brightness 400 Nits, Dynamic Contrast Ratio: 500000:1, Viewing

angle (horizontal / vertical): 178 / 178 degree, Display Colours: 1.07 Billion,

Panel technology: IPS / Direct LED, Contrast ratio (typical) 1200:1, Connectivity:

4 MR Video Input: 2 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In, Audio Out, COntrol: Nos 1 44841.00 44841.00

RS232, Ethernet, 2x10W Built-in speakers, BIS Certified etc all complete or its

equivalent specifications or as per the selection of client and items shall be

complete in all respects.

SITC of HDMI cables 10 meters etc all complete. or its equivalent specifications 2

5 MR or as per the selection of client and items shall be complete in all respects. Nos 8968.00 17936.00

Total : A - CCTV 144132.00

26 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Description Unit QTY Rate DSR AMOUNT NON DSR AMOUNT

Supply, Installation, Testing and Commissioing of

Recessed/Suspended/Surface Mounted downlight with HPE (High-

Performance Efficiency) with LED (Light Emitting Diode), system power: 12 W,

min 100 Lm/W, colour temperature of 4000K, CRI>80, 230V constant current

1 MR driver, 70% of luminous flux after 50,000 operating hours, energy efficient no 66 960.30 63379.96

LEDs, direct light emission, luminaire profile powder coated black, Prismatic

diffuser for homogenous light distribution, UGR<20, or its equivalent

specifications or as per the selection of client and items shall be complete in

Supply, Installation, Testing and Commissioing of Recessed downlight with

HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system

power: 05 W, min 100 Lm/W, colour temperature of 4000K, CRI>80, 230V

constant current driver, 70% of luminous flux after 50,000 operating hours,

2 MR energy efficient LEDs, direct light emission, luminaire profile powder coated no 33 801.18 26438.92

black, Prismatic diffuser for homogenous light distribution, UGR<20, or its

equivalent specifications or as per the selection of client and items shall be

complete in all respects.

Supply, Installation, Testing and Commisioning of spot light of min 2w as per

3 MR the site requirement no 5 480.71 2403.54

TOTAL 92222.41

27 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - EPABX

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE NON-DSR AMOUNT

2.8” (diagonal) color display—320 x 240 pixels, Multiple line phone with four red /

green line / feature indicators around display, 4 Context sensitive soft keys, Hard

buttons for phone, messages, contacts, history, home, navigation cluster, headset,

speaker, volume, mute, LEDs for speaker, mute, headset, essage, history,

Wideband audio in handset and wired headset, Full duplex speakerphone &

handset, Ergonomic hearing aid compatible handset supports TTD acoustic

coupler, Message waiting indicator, Mute key with optional mute alerting, IC call

alerting with 360-degree visibility, Dual-position stand, optional wall-mount stand,

Gigabit Ethernet (10 / 100 / 1000) line interface, Second Ethernet interface 10 / 100

/ 1000 Mbps, PoE Class (IEEE 802.3af) registers as class 1 device and supports

1 MR 802.3az, Optional AC to 5 volt power supply • SIP protocol support, Standards- Nos 3 12043.00 36,129.00

based codec support: G.722, Opus, Configurable via Web interface, Support for

HTTPS, TLS and SRTP for encryption, Recent Call Log (100 entries), Zero touch

deployment via Device Enrollment Services Support, Supports the following

languages: Dutch, English (UK & US), French, (Canada), French (France),

German, Italian, Japanese, Portuguese (Brazil), Simplified Chinese, Spanish (Latin

America), Spanish (Spain),Traditional Chinese, Includ Licence. or its equivalent

specifications or as per the selection of client and items shall be complete in all

Total 36,129.00

28 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR 2022/ DESCRIPTION UNIT QTY RATE TOTAL TOTAL AMOUNT

S No DSR 2022/ DESCRIPTION UNIT QTY RATE TOTAL TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class heavy duty

MS pipe conforming to IS 3589/IS 1239 including Welding, fittings

like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing

18.7 the pipe on the wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel paint of

required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia quartzoid

18.21 bulb type sprinklers of rating 68 degree centigrade with required

2 accessories :

18.21.1 Pendant type Each 57 522.00 29754.00

Supplying, installation, testing & commissioning of sprinkler flexible

pipe (UL Listed) of stainless steel complete with 15 NPT on reducer

thread with maximum working pressure of 175 PSI test pressure of

875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to

3 18.25 sprinkler head (Outlet) 15mm NPT female thread with reducer,

nipple, 2 side brackets, center bracket, stockbar of following sizes

complete as required.

Providing and fixing ISI Marked of approved make Fire

4 Extinguishers complete with all accessories as per manufacturer's

specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). NOS 1 12911.83 12911.83

b) Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). NOS 1 2931.53 2931.53

Digitally signed by AMIT

c) ABC dry powder stored pressure type 6 kg capacity (IS:15683). NOS 1 4746.13 4746.13

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

S NO DESCRIPTION/ SPECIFICATIONS UNIT QTY RATE AMOUNT

CONFERENCE TABLE

TABLE SIZE: 2100W x 600D x 750HT (02 NOS)

TABLE SIZE: 1350W x 600D x 750HT(35 NOS)

Specifications:-

Conference table in completely knock down conditions that is to be assembled at site or to be made at site. . Table

tops will be made out of 12+12 mm ply with veneer( 25mm thick) as per approved shade and colour with hard wood

edhe moulding. The table shall be clad with 18mm thick modesty panel which provide structural support for the

table. The modesty panel shall be 18mm thick ply with veneer/acrylic surface as per approved design. Wire carrier

shall be provided below the table top for power connection having size 60mm X 125mm made of 0.8mm thick high

yield strength of CRCA sheet of grade 'D' confirming to IS:513 with duly powder coated. There shall be buffers

provided at the base to avoid scratches on the floor. The table connections have to be made in such a way that no

gap should be seen in between. meeting long time load bending, screw-withdrawal strength, modulus of rupture and

modulus of elasticity bending tested as per Indian standard. Product should beas per the specifications or as per the

selection of client and items shall be complete in all respects.

HIGH BACK CHAIR FOR CONFERENCE ROOM

Specifications.

Supplying & Installation of High back chair Chrome Base: Specially designed 5 pronged structure forged out of CR

Sheets of 2 mm thick. Base of diameter 26 inches for complete stability, extreme durability, sturdiness and pleasant

aesthetic looks. Reinforced with CO2 welding to provide additional strength and support.Castors - Twin Castors

50mm dia wheel made of Nylon castors compling to ANSI / BIFMA X 5.1 – 2002.Gaslift - Class 4 tested -ANSI

BIFMA performance standards.Upholstery: Cushion with pre moulded foam of 50 - 60 density in the shape of

plywood. T Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%. Chair Seat will come to the Actual position

automatically. Cushioned Back with Leatherette Upholstery. Adjustable Lumbar Support Allows you to adjust the

lumbar support position for good back support and blood circulation.Moulded self skinned polyurethene Arms

2 confirming to IS 7078 with steel inserts for long life.' 2D' adjustable Arms - (Height & Swivel).Distinctively and NOS 1 17,114 17,113.64

characteristically designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust

knob and importantly offering seat to back recline ratio of 3:7, optimal for good back support.Multilock mechanism is

fabricated from CR Sheets, undergo through CO2 welding process imparting uniform surface finish and tensile

strength. The components are processed with high degree of precision and care so as to assemble with other parts

in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II

material conforming to Indian Standards.Moulded self skinned polyurethene Arms confirming to IS 7078 with steel

inserts for long life.' 2D' adjustable Arms - (Height & Swivel).Seat & Back are duly upholstered with High Grade

Leatherette. or its equivalent specifications or as per the selection of client and items shall be complete in all respects.

Digitally signed by AMIT

MEDIUM BACK CHAIR FOR CONFERENCE ROOM

Specifications.

Supplying & Installation of High back chair Chrome Base: Specially designed 5 pronged structure forged out of CR

Sheets of 2 mm thick. Base of diameter 26 inches for complete stability, extreme durability, sturdiness and pleasant

aesthetic looks. Reinforced with CO2 welding to provide additional strength and support. Castors - Twin Castors

50mm dia wheel made of Nylon castors compling to ANSI/ BIFMA x 5.1 – 2002.Gaslift - Class 4 tested -ANSI BIFMA

performance standards.Upholstery: Cushion with pre moulded foam of 50 - 60 density in the shape of plywood. T

Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%. Chair Seat will come to the Actual position automatically.

Cushioned Back with Leatherette Upholstery. Adjustable Lumbar Support Allows you to adjust the lumbar support

position for good back support and blood circulation.Moulded self skinned polyurethene Arms confirming to IS 7078

with steel inserts for long life.' 2D' adjustable Arms - (Height & Swivel). Distinctively and characteristically designed

tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering

seat to back recline ratio of 3:7, optimal for good back support.Multilock mechanism is fabricated from CR Sheets,

undergo through CO2 welding process imparting uniform surface finish and tensile strength. The components are

processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give

smooth and effortless reclining experience. Tension springs are made out Grade II material conforming to Indian

Standards.Moulded self skinned polyurethene Arms confirming to IS 7078 with steel inserts for long life.' 2D'

adjustable Arms - (Height & Swivel). Seat & Back are duly upholstered with High Grade Leatherette. or its equivalent

specifications or as per the selection of client and items shall be complete in all respects.

Digitally signed by AMIT

SCHEDULE OF QUANTIITES: AV SYSTEM

S.No. Item Description Unit Qty Rate DSR Amount Non DSR Amount

SITC of 98" Slim Direct LED display with min or equivalent Resolution 3,840 x

2,160, Brightness (Typical) 500, Contrast Ratio 4,000 : 1, HDMI In 2, DP In

1 Yes, DVI In 1, USB 2, IR In Yes, RS232 In Yes, TIZEN operating system, No's 1 979,726.82 979,726.82

boosts the displays overall performance, extensive connectivity and ongoing

24/7 performance etc

SITC of 55" Slim Direct LED display with min or equivalent Resolution 3,840 x

2,160, Brightness (Typical) 700, Contrast Ratio 6,000 : 1, HDMI In 2, DP In

Yes, DVI In 1, USB 2, IR In Yes, RS232 In Yes, TIZEN operating system,

boosts the displays overall performance, extensive connectivity and ongoing

2 24/7 performance, Director Mode / SmartView+(PC) . Tizen Enterprise No's 2 78,129.44 156,258.89

Platform / Smart Calibration / SmartView+(mobile), Symmetric Design (same

with QxR) / Center IR / Temperature Sensor / Auto Level / Wi-Fi(2.4/5.0GHz

SITC of Wireless Presentation Platform, allows simultaneous content sharing

for up to four 1080p presenters, Wireless screen casting with iOS, Android,

Mac, Chromebook, and Windows devices through native AirPlay, Google Cast,

3 or Miracast protocols, Supports YouTube Live streaming, Local storage No's 1 209,623.08 209,623.08

available for playback of images and video, WPA2-PSK, and AES-128

encryption etc all complete or its equivalent specifications or as per the

selection of client and items shall be complete in all respects.

SITC of Cable Cubby with flip top, cover and 6 Pass Through Holes for multi-

format cables, 2 Universal Power Socket , 1 HDMI, 1 USB-C for Data

4 Transfer, made of aluminium etc all complete etc all complete or its equivalent No's 3 12,365.71 37,097.12

specifications or as per the selection of client and items shall be complete in all

SITC of Network PTZ Conference Camera, Dual Camera ,20x optical zoom

and 60° horizontal FoV, 1/2.8” low-noise CMOS Sensor, Sensor Scanning

Mode: Progressive, Horizontal Rotation Range: ±170°, Vertical Rotation

Range: -30° to +90°, Image rotation for ceiling mounting, White Balance: Auto,

indoor, outdoor, one-push, manual, specified color temperature, IP Stream

5 Resolutions: H.264 @ 360p, 270p or 180p, a single network cable for video, No's 1 411,846.16 411,846.16

power and control data transport, HDMI 2.0 and 3G-SDI Outputs Power Over

Ethernet (PoE) support etc all complete or its equivalent specifications or as

per the selection of client and items shall be complete in all respects.

33 Digitally signed by AMIT

SITC of 4K 4×4 HDBaseT™ Matrix with 3 Receivers HDBaseT enables 60Hz

4K UHD content (8-bit) to be sent over HDBaseT to 35m/115ft Compatible with

DVI-I and DP++ v1.3 signals from compatible devices, 4 audio outputs allow

audio to be independently de-embedded from outputs via S/PDIF coaxial

SmartEDID feature also dynamically detects display/source capabilities and

automatically outputs the highest possible resolution, Additional EDID

management through DIP switches for global setting or via WebUI for

independent management of EDID per source, Embedded WyreStorm WebUI

enables simple source switching and installer set-up & configuration, WebUI

includes full EDID management to read, copy, store or import EDID from

connected devices, Assign a different EDID to each connected source device,

API triggered standby mode puts unit into low power state during downtime,

Flexible control options – front panel buttons, infrared remote control, local IR,

RS-232, Telnet or WebUI, 3.5mm jack input for receiving local IR commands

out of line-of-sight, 2-way IR for far-end device control from control system or

source control from a zone or its equivalent specifications or as per the

selection of client and items shall be complete in all respects.

34 Digitally signed by AMIT

SITC of controller Should Support 127 or better conference units; maximum

4000 units with extensions. Should have TCP/IP network interface, along with

Voting, speech and data management function Controller Should have Built-in

high performance DSP feature technology. and Mixer technology, Automatic

Camera Tracking System to track the speaker. Should have the 4.3" high-

definition color touch screen. Should have Conference check-in and recording.

Should have Automatic unit inspection. Should have Speech timing and

countdown function. Support video tracking, with 6 HDMI in and 1 HDMI out, 6

BNC in and 1 BNC out Should have RCA interfaces: 2 AUX input, 2 AUX

output, 2 Alarm input with override function. Should be controllable through

Android PAD remote Control. Should support FIFO, NORMAL, VOICE, FREE,

7 APPLY five conference modes. LINE input voltage : 250 (±30) mV, LINE output No's 1 164,016.46 164,016.46

voltage : 1 (±0.1) V, BALANCE output voltage : 1 (±0.1) V, Frequency

response: 41Hz-19.5kHz（-3dB, SNR: >79 dB) ,Harmonic distortion: <0.2-

0.3%, Output power: ≤110W/3-way, 24V Max. power: 350W, Power

consumption: 15W, Control interface ; RJ45, RS232, RS422, Power source;

Switch Mode Power Supply 220V-240V/50Hz/350W or its equivalent

specifications or as per the selection of client and items shall be complete in all

SITC of Table Top Chairman Unit, Design for Desktop , detachable Mic &

Convenient to use. Cardoid Condenser Microphone Gooseneck Type with

Cover for Windshield

Two colors indicators, red for speaking, green for apply to speak, Built-in Hi-

speaker, will be muted automatically when the Mic is turned on to avoid

3.5mm stereo earphone jack, volume adjustable Every Mic Should be with

unique ID code, can be set up via, Controller With camera tracking function,

can be set up via Controller or through Software Power supply from the

Controller/extender Unit, working power DC 24V. Should Support cascaded

linkage, T shape linkage or + shape linkage. Output frequency response: 46Hz-

17.5kHz（-3dB, SNR : >80dB Harmonic distortion : <0.5%, Mic Frequency

response: 41Hz-20kHz（-3dB), Max Sound Pressure Level: 124dB (THD<3%),

Connection: 8 Pin DIN or its equivalent specifications or as per the selection of

client and items shall be complete in all respects.

35 Digitally signed by AMIT

SITC of Table Top Delegate Unit , Design for Desktop , detachable Mic &

Convenient to use, Cardoid Condenser Microphone Gooseneck Type with

Cover for Windshield

Two colors indicators, red for speaking, green for apply to speak, Built-in Hi-

speaker, will be muted automatically when the Mic is turned on to avoid

3.5mm stereo earphone jack, volume adjustable Every Mic Should be with

unique ID code, can be set up via Controller, With camera tracking function,

can be set up via Controller or through Software

Power supply from the Controller/extender Unit, working power DC 24V,

Should Support cascaded linkage, T shape linkage or + shape linkage, Output

frequency response: 46Hz-17.5kHz（-3dB, SNR : >80dB

Harmonic distortion : <0.5%, Mic Frequency response: 40Hz-19.5kHz（-3dB,

Max Sound Pressure Level: 124dB (THD<3%), Connection: 8 Pin DIN or its

equivalent specifications or as per the selection of client and items shall be

complete in all respects.

SITC of 20 Meter Conference system extend cable between terminals, 8-pin

high-density cable with one Side Male Connector & one Female Connector or

10 its equivalent specifications or as per the selection of client and items shall be No's 2 19,369.29 38,738.59

complete in all respects.

SITC 2 Meter Conference system extend cable between terminals, 8-pin high-

density cable with both Side Male Connectors to Connect Controller with

Extended Power Supply or its equivalent specifications or as per the selection

of client and items shall be complete in all respects.

SITC Conference socket is Technitia's T-DCU series Digital conference

system dedicated microphone ground hidden interface box, with two standard

8-core DCN male socket and 1 AC220V three-hole universal power supply

12 socket, or its equivalent specifications or as per the selection of client and No's 1 13,580.00 13,580.00

items shall be complete in all respects.

36 Digitally signed by AMIT

SITC of Audio, Video and Control (AV&C) Processor, with codec facililty (inbuilt

or additional hardware ) ,64 x 64 networked audio channels, 8x on-board Flex

channels and GPIO, Full-featured Control engine (with feature license), 8 AEC

Processors, up to 32 x 32 Dante audio channels (8 x 8 included), USB AV

13 bridging (8 x 8 audio + Camera support), Full-featured Q-SYS Control engine No's 1 404,016.16 404,016.16

(with optional feature license), External USB audio device host, Up to 2x VoIP

instances etc all complete or its equivalent specifications or as per the

selection of client and items shall be complete in all respects.

SITC of 6.5-inch, 2-Way Ceiling Speaker, Rated Power: 60W, Frequency

Range: 65 Hz – 20 kHz, Sensitivity: 88 dB, Rated Coverage 135° conical DMT,

Maximum continuous SPL 106 dB, Nominal impedance: 8 / 16 Ohm,

14 Transformer taps: 60W / 30W / 15W at 100 / 70V, IP-34 Rated, Low-saturation No's 6 17,705.00 106,230.00

and low-loss 70/100V transformers with 16Ω bypass, UL and CE Certified etc

all complete or its equivalent specifications or as per the selection of client and

items shall be complete in all respects.

SITC of 4 Channel Class-D Amplifier, Power (per channels driven): 200 W at 8

Ω / 4 Ω / 100V / 70V, or min 1000 w ,FlexAmp Technology, Frequency

Response: 20 Hz – 20 kHz, Signal to Noise > 103 dB, Input impedance >10k,

balanced or unbalanced, User-configurable operating modes, UL, CE,

15 RoHS/WEEE compliant etc all complete or its equivalent specifications or as No's 1 117,376.16 117,376.16

per the selection of client and items shall be complete in all respects. or its

equivalent specifications or as per the selection of client and items shall be

complete in all respects.

SITC of 10.2" Apple iPad LED-backlit Multi-Touch display with IPS technology

with User Control Interface (UCI) Deployment etc all complete or its equivalent

16 specifications or as per the selection of client and items shall be complete in all No's 1 50,068.23 50,068.23

respects. or its equivalent specifications or as per the selection of client and

items shall be complete in all respects.

SITC of 4-Port Gigabit PoE+ Ethernet Smart Switch with 2 SFP Ports and

17 Cloud Management etc all complete or its equivalent specifications or as per No's 1 26,773.23 26,773.23

the selection of client and items shall be complete in all respects.

SITC of Wireless Access Point etc all complete or its equivalent specifications

18 or as per the selection of client and items shall be complete in all respects. No's 1 14,926.00 14,926.00

SITC of 2m/6.5ft HDMI 2.0 Cable, 18Gbps 4K60Hz, Dolby Vision & HDR,

ARC,CEC, ALLM, VRR, | CL3 & VW-1 Rated etc all complete or its equivalent

19 specifications or as per the selection of client and items shall be complete in all No's 6 3,260.00 19,560.00

Digitally signed by AMIT

SITC of 5 Meter Premium High Speed HDMI 2.0b Flexy Cable, Bandwidth up

to 18Gbps, Up to 4096x2160@60Hz at RGB 4:4:4 video resolution, High

20 Dynamic Range (HDR10), Dolby Vision and Hybrid log–gamma (HLG) video No's 4 6,865.00 27,460.00

etc all complete or its equivalent specifications or as per the selection of client

and items shall be complete in all respects.

SITC of10m HDMI 2.0 AOC | 24Gbps | 4K60Hz | Dolby Vision & HDR | ARC,

CEC, ALLM & VRR | ISF Certified | FT4, CL4 etc all complete or its equivalent

21 specifications or as per the selection of client and items shall be complete in all No's 3 17,610.00 52,830.00

SITC of 2m/6.5ft USB-C to C Cable | SuperSpeed USB 20Gbps | 4K60 Alt-

22 Mode | 100w PD etc all complete or its equivalent specifications or as per the No's 3 4,305.00 12,915.00

selection of client and items shall be complete in all respects.

SITC of USB-C to C Active Optical Cable | 5Gbps Superspeed | 4K60 Alt-Mode

| 60W PD | Screw-Lock Connector (15m/49ft) etc all complete or its equivalent

23 specifications or as per the selection of client and items shall be complete in all No's 1 64,505.00 64,505.00

SITC of 2 Conductor 16 AWG Speaker Cable, stranded Bare copper

conductors, PVC/Nylon insulation, PVC jacket (as per actual) etc all complete

24 or its equivalent specifications or as per the selection of client and items shall Meter 200 177.47 35,494.95

be complete in all respects.

SITC of Category 6A Cable, 4 Pair, S/FTP, PVC jacket (as per actual) etc all

25 complete or its equivalent specifications or as per the selection of client and Meter 100 82.40 8,239.90

items shall be complete in all respects.

SITC of Various Cables & Connectors etc all complete required for AV or

26 wireless presentation or its equivalent specifications or as per the selection of Set 3 6,027.32 18,081.97

client and items shall be complete in all respects.

SITC of 24U, Equipment Rack, with Front & Side doors, 4 No Fan Assembly,

on Top of the Rack, 4 Caster wheels, 2 no Shelfs to mount the equipments

which are not rack mounted, 8X2, 5/6 Amp. Power Distribution Unit, Cable

27 Manager & Sufficient Rack hardwares etc all complete or its equivalent Set 1 36,159.65 36,159.65

specifications or as per the selection of client and items shall be complete in all

SITC of Wooden Podium of suitable size with screen as per the requirement &

specifications of client.

SITC of HD Visual Communications System, with point to point IP connectivity

along with soft VC connectivity 4k Codec-Wireless Presentation System, auto

29 track cam with wall mount, IP Mic, touch pannel, NTSC/PAL; Cables: 1 HDMI Nos 1 454,000.00 454,000.00

1.8m, 1 CAT 5E LAN 3.6m, 1 CAT 5E SHLD 25ft, Power: India BIS.

Maintenance Contract Required.

Digitally signed by AMIT

SITC of Universal Switcher with HDMI and USB-C connectivity, 2 HDMI Inputs,

2 USB-C connectivity (4K Video, Audio, Data, Power charge), 2 HDMI Outputs,

4 USB-A 3.0 Connection (for USB Devices), 2 USB-B 3.0 Connection (for PC

30 hosts), USB host switching, Analog audio de-embedding, Charging via USB-C Nos 1 145,600.00 145,600.00

up to 60w, Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up

to 18 Gbps), DP Alt Mode, HDMI 2.0, HDMI 1.x, DVI Signal Support, HDCP

1.x, HDCP 2.2 support etc all complete

31 SITC of Handheld Mic as per the requirement & specifications of client. Nos 0 28,114.00 0.00

SITC of Lavalier Belt Pack Mic with controller as per the requirement &

specifications of client.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of intelligent analog addressable

1 17.2.4 photothermal detector complete with mounting base complete as required. Each 46 2858.00 131468.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed

MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector

with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as

Supplying, installation, testing & commisssioning of intelligent addressable programmable

5 17.2.6 sounder complete as required. Each 1 2651.00 2651.00

Supplying, installation, testing & commissioning of addressable fire control module complete

Supplying, installation, testing & commissioning of addressable phone control module

7 17.2.11 complete as required. Each 1 3267.00 3267.00

Supplying, installation, testing & commissioning of addressable manual call point complete as

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms

13 MR operating at 240 Volt AC Supply complete as required. NOS 1 30000.00 30000.00

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

14 17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath Mtr. 690 173.00 119370.00

complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

17.5.3 existing surface / recessed steel conduit of following pairs, cores and size including

15 connections and interconnections etc. as required.

17.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm Mtr 225 89.00 20025.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries

16 17.5.4 and accessories like coupler etc. as required. Metre 180 53.00 9540.00

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery

17 M.R. backup complete as required. or its equivalent specifications or as per the selection of client NOS 4 2450.00 9800.00

and items shall be complete in all respects.

TOTAL FIRE ALARM WORKS 359824.00 9800.00

Digitally signed by AMIT