Work

Amount

Details of Work.

Supply and Fixing of Ionisation type Smoke Detector , the detector shall be sesitive to all type of smokes, will be sensitive to amount of light, air drafts and changes with the operating temprature and volatge ranges. The detector shall meet the requirement of either EN54/FMUL or LPC and shall be specifically approved by FM/UL/LPCB Apollo/System Sensor/Edward/Bosch/honeywell

Supply and Fixing of Response Indicator lamp assembly consisting of lamp holder and lamp shall be suitable for mounting on walls partition etc. The housing shall be suitable for surface/Flush monting on walls on 1.5 mm thick steel sheet and facia 03 mm acrylic mounted outside a Kiosk and directly connected to detector.

Supply and Fixing of heat Detector (for battery room) it is combination of rate of rise & fixied temprature prinicpal using & with automatice compenasation for changes of ambient condtions. The themral detectors are rested and approved to (FN54 part 5/2000) class air apollo/system sensor/edward/Bosch

Supply and Fixing of 4 zone smoke detector system panel .

Supply and Fixing of complete Fire Siron system .

Supply and laying of of (100mtr) of 2x1.5 sq. mm. PVC insulated and seathed standard copper wire, wiring for fire alarm system in general shall comply with IS-2189 and IS-732 ammended up to date. The Detectors shall be wired by ISI marked 1.5 sq. mm. PVC Insulated standard FRLS copper conductor wires of 1100 volts grade requiored and desired on site. Crimping type of lugs are also included in the rates of laying of wires and its connections PVC insulated copper conductor wire shall confirm to IS:694. the work also include (ACDB, DCDB, DC CHARGER) , SPR (CONTROL AND RELAY panels) and rectify the probem of any problem occur in old fire sytem.

Supply & fixing of 120 watt LED Lamp Crompton Greaves, Bajaj/ Havells make fitting including lamp, ballast igniter etc. for fixing on structure including cost of all material labour and T&P for completion of work

Supply & fixing of junction box on lighting poles of size 200x200x150 mm. of MS sheet SWG duly painted with synthetic enamel paint box should be fixed and backlite terminal strip of 4 Nos terminal both should be fixed on sun mica sheet and half round M.S. Clamp with GI pipe for fixing the junction box on the structure

Supply & fixing of 16 Amp. MCB make- Crompton greaves, Bajaj/Havells make fitting on structure including cost of all material labour and T&P for completion work.

Laying of 2x2.5/4x2.5 sq mm PVC cable 50cm.below the ground level in PVC conduct pipe after excavation and back fitting including all labor PVC pipe etc.

Rates qouted by the bidders shall be without taxes. Taxes applicable if any to paid extra

M/S V.K.T. SYSTEMS

LOVELY ENTERPRISS