Raising of Dhanouri Distributary from RD 0 to 23185 and rehabilitation from RD 23185 to RD 53000 and repairing of patch from RD 53000 to RD 62500.

Amount

Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unservicable material within 50 mtrs lead in cement mortar (HSR Item No. 5.7.4) @ Rs. 655 per Cum

Lining with design mix concrete of grade M-15 with minimum cement content 240KG/Cum, 75 mm thick in curve portion and side slope manually including 10 mm thick plaster 1:5, form work, curing, dressing & preparation as per direction of Engineer-In-Charge.

Lining with design mix concrete of grade M-15 with minimum cement content 240KG/Cum, 75 mm thick in bed manually including rendering with 10 mm thick plaster 1:5, form work, curing, dressing & preparation as per direction of Engineer-In-Charge.

Providing and laying in position ready mixed plain cement concrete M-15 grade plain cement concrete, using cement content as per approved design mix and manufactured in fully automatic bathcing plan and transported to site of work in transit mixture for all leads having continous agitated mixer manufactured as per mix design for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centring, shuttering and finishing, including cost of curing, admixture in recomended portion as per IS:9103 to accelerate/retard setiting of concrete, improve workability without impairing strength and durability (Cement content considered @240 KG/Cum) (HSR No. 6.22.2.2) @ Rs. 4224 per Cum

Supply of 150 micron polythene sheet N S @ Rs. 150.00 per Kg

Laying of polythene @ 0.13 per sqm

Filling expansion joints, with special impervious hot pur, 12.5 mm vide. Per meter per cm depth (HSR item No. 14.18) @ Rs. 1.00 Mtr/CM

Earth work for lip-cutting for lining of irrigation channels, inclusive of all allowances, lead and dressing by manual means depth exceeding 1.5 Mtrs but not upto 3.0 mtrs. HSR Item No.14.24.1 @ Rs. 81 per Cum

Excavating, supplying and filling of local earth ( including royalty) by mechanical transport upto a lead of 1 KM also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc (HSR item No. 4.33) Rs. 82 per Cum

Earth work in excavation by mechanical means/manual means over areas (exceeding 30 cm in depth, 1.5 mtrs in width as well as 10 Sqm on plan) including getting out and disposal of excavated earth lead upto 50 mtrs and lift up to 1.5 mtrs in all kind of soil (HSR item No. 4.12.1) @ Rs. 87 per Cum

Earth work excavation by mechanical means/ manual means in foundation trenches or drains(Not exceeding 1.5 mtrs in width for 10 sqm on plan) including dressing of sites and ramming of bottoms, lift upto 1.5 mtrs including getting out the excavating soil and disposal of surplus excavated soil as directed within a lead of 50 m in all kind of soil(HSR Item No. 4.14.1) @ Rs. 93 per Cum

Brick work in 1:4 (1Cement 4 Coarse Sand) Mortar with common burnt clay non modular bricks of class designation 7.5 in Foundation & Plinth complete as per HSR 7.21.1 @ Rs. 4135 per Cum - 23 (B. Bats)

Steel reinforcement for RCC work where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level (Thermomechanical treated bar of grade FE 500 D or more) (HSR Item No. 6.33.6) @ 68 per KG

Centring and shutteing including strutting, propping etc and removal of form for suspended floors, roofs, balconies(HSR item No. 6.30.3) @ Rs. 233 per Sqm

Providing and laying in position specified grade of RCC, excluding the cost of centring, shuttering, finishing and reinforcement all work upto plinth level in 1:1.5:3 (HSR Item No. 6.14.1) @ Rs. 4898 per Cum

Supply of APM Blocks @ Rs. 5000 per Nos.

Demolishing cement concrete Manually / by mechanical means and disposal of material within 50 mtrs lead nominal concrete 1:2:4 or leaner mix (HSR Item No. 5.33.2) @ Rs. 1287 per Cum

Providing and laying in position cement concrete of specified grade excluding the cost of centering and Shutteing 1:2:4, 20 mm aggregate (HSR Item No. 6.1.2) @ Rs. 3892 Per Cum

Pointing on brick work for brick flooring with cement mortar 1:3 ( raised and cut pointing) HSR Item No. 11.25.2) @ Rs. 105 per Sqm

Providing and laying DPC (40 mm thick) with cement concrete 1:2:4 with 12.5 mm nominal size (HSR Item No. 6.8.2) @ Rs. 149 per Sqm

RCC Work in beam, suspended floors, roofs having slope upto 15 degree landings, balconies, shellfs, chajjas, lintel, bands, plain window sills, staircases and spiral stair cases above plinth level upto floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 with aggregate 20 mm nominal size (HSR Item No. 6.16) @ Rs. 6845 per Cum

Centring and shutteing including strutting, propping etc and removal of form for lintels, beams, plinth beams, girders, and cantilevers (HSR Item No. 6.30.5) @ Rs. 332 per Sqm

Providing and laying in position specified grade of RCC, excluding the cost of centring, shuttering, finishing and reinforcement all work upto plinth level in 1:2:4 (HSR Item No. 6.14.2) @ Rs. 4339 per Cum

10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consildated and plastered with 25 mm thick mud mortar with bhusa @ 35 KG per cum of earth and gobri leaping with mix 1:1 and covered with machine moulded tile bricks, grouted with cement mortar 1:3 mixed with 2 % of integral water proofing compound by weight of cement and finished neat (HSR Item No. 9.12.1) @ Rs. 550 per Sqm

12 mm cement plaster 1:4 on wall inner side (HSR Item No. 11.5.3) @ Rs. 94 per Sqm

Providing & Laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling & providing and laying Conglomerate floor 40 mm thick cement concrete 1:2:4 (HSR Item No. 10.1+10.8) @ Rs. 291+203 = 494 per Sqm

Providing and laying of brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks CM 1:4 (HSR Item No. 10.33.1) @ Rs. 646 per Sqm

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angles of section 50x25 mm, or base tiles of 2.00 mm pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar gaurds, lock strike-plate and shock absorbers as specigied and applying a coat of approved steel primer after pre-treatementof the surface fixed with adjustable lugs with split end tail to each jamb (HSR item No. 13.3.3.1) @ Rs. 382 per Mtr

Providing and fixing 1mm thick M.S. Sheet door with frame of 40 x 40 x 6 mm angle iron (HSR No.13.6.1)

White washing with line to give an even shades new work (3 or more coats) (HSR item No. 11.61.1) @ Rs. 15 per Sqm

Finishing wall with water proof cement paint on new work (2 or more coats @ 3.84 KG/10 Sqm) (HSR Item No. 11.93.1) @ Rs. 44 per Sqm

Applying primary coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanished iron/steel works (HSR Item No. 11.68.3) @ Rs. 22 per Sqm

Painting 2 coats excluding primary coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade (HSR Item No. 11.78) @ Rs. 35 per Sqm

Providing and fixing fan hook made from 8 mm dia MS rod 75 cm long of each 81 required shape and size (HSR No. 23.23.4) @ Rs. 81 per No.

Structural steel work in Single section fixed with or without connecting plate including cutting, hosting and fixing in position (HSR Item No.13.27)

Wiring in 1.5 Sqm. PVC insulated Copper conductor Cable in drill condute pipe - Wiring for light/fan/call bell point in 1:5 sqmm FRLS PVC insulated copper conductor cable in 1:6 mm thick PVC conduit pipe(HSR Item No. 23.3.1.3) @ Rs. 515 per No.

Wiring in 1.5 Sqm. PVC insulated Copper conductor Cable in drill condute pipe - Wiring in PVC conduct system for 3-pin 15 amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthing including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch required MS Box etc complete as required (HSR Item No. 23.3.5.1) @ Rs. 1026 per No.

PVC insulated Wire (1.5 sq. mm ISI Marka) as per HSR Item No.EL003.

PVC Pipe 6" D Plast 4Kg ISI (HSR No.B0242)

Credit of Dismantelled Material @ Rs. 880 per Cum

ROHTASH KUMAR CONTRACTOR

SURESH KUMAR CONTRACTOR

Sh Amrit Lal Nagpal