REPAIR/POLISHING AND PAINTING OF FURNITURE FOR VARIOUS MD ACCN AT PANAGARH UNDER GE PANAGARH (2ND CALL)

Amount

FD-67(M)/ 1032 Almirah Steel Medium

(a) Taking out of broken door shutter from Almirah med Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing

(b) Removing the worn out u/s handle from the almirah and providing/fixing of new handle chromium plated heavy quality as approved by Engr-in-Charge/GE.

(c) Removing the worn out u/s lock from almirah and providing/fixing with new lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved by Engr-in-Charge/GE duly fixed as per drawing.

(d) Removing the worn out u/s 3 way locking device and providing/fixing the new one in its original postion as per drg.

(e) Removing the worn out u/s leg and providing / fixing the new leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg.

(f) Taking out of u/s worn out shelf and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg.

(g) Removing the worn out paint from internal/external surface of almirah steel large by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of Metal primer to bring the surface to a glossy shine as directed by Engr-in-Charge.

FD-246 Repair to bed

(a) Remove the unserviceable plywood from both side of head board frame of bed. Supply and fixing with new plywood 4mm thick one side teak face on the both side existing head board (Size of ply : 780mm x 340mm) and 12mm dia half cut teak wood beading shall be provided with joins of plywood.

(b) All as per item No 2.01 here-in-before but for foot board. Size of Ply shall be 780mm x180mm.

(c) Remove of unserviceable legs from head board of bed and Supply and fixing with new legs in its original position made out of teak wood. Size of leg shall be 60mmx 60mm x 860mm and all as per drg and directed by Engineer-in-charge.

(d) Remove of unserviceable legs from foot board of bed and Supply and fixing with new legs in its original position made out of teak wood. Size of leg shall be 60mmx 60mm x 500mm and all as per drg and directed by Engineer-in-charge.

(e) Remove the existing unserviceable long rail and supply and fix new long rail (size : 35mm x 90mm x 1980mm) made out of Teak wood well seasoned and all as shown on drg and directed by Engineer-in-charge.

(f) Remove the existing unserviceable ply wood from bed and supply and fixing with new plywood 12mm thick BWR IS-303.

(g) Preparation of surface by Remove of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge.

FD-256 Repair/Re-canning of Chair Varandah

(a) Remove of old caning from the steel frame of chair varandah and making the frame by means of welding wherever required to bring its in original shape as per drg.

(b) De-rusting/cleaning the iron frame to smooth surface and painting all steel surface with two coat of synthetic enameled white paint over a coat of red oxide primer to bring the surface with glossy finish and re-caning the same with 4mm white plastic cane oval shape as approved by Garrison Engineer as per drg and providing the new rubber shoe complete.

FD-220 Charpoy GI Pipe

(a) Remove the existing unserviceable nylon newar from Charpoy GI Pipe and making the frame to its original position by tightening etc and Supply & Weave with new nylon newar 50mm- 55mm width white colour non-recycled. The weaving shall be close with 33 and 14 Nos bands both on long and short rail respectively. The weight of nylon newar shall not be less than 1.5 Kgs per charpoy

(b) Removing the unserviceable/broken check nuts form GI charpoy & supply and fix 6mm thick GI Medium grade check nuts suitable for 32mm dia GI pipe all as specified and shown on drawings (Each check nut will be measured as single unit)

(c) Removing the unserviceable broken 3 way GI elbow from GI charpoy and S & F 32 mm dia GI medium grade 3 way elbow ISI marked all as specified and shown on drg and directed by Engr-in-Charge (Each GI Elbow shall be measured as single unit)

(d) Removing the existing unserviceable/broken long rail from GI charpoy and S & F new long rail of GI tubing 32mm including cutting, threading and bringing the GI charpoy into the original shape as shown on drawing and directed by Engr-in- Charge.

(e) Making short rails obtained from item No 4.04 above and fixing all as shown on drawing.

(f) Making legs out of unserviceable long/short rails obtained from item 4.04 and 4.05 above including cutting, threading and fixing all as specified and directed by Engr-in-Charge.

FD-279 Repair/Re-canning of Chair Dinning Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.

(a) Front Legs

(b) Rear Legs

(c) Front rail of seat frame (Hole should be 12.5mm apart of each other)

(d) Side Rail(Ditto complete)

(e) Back Rail(Ditto complete)

(f) Short stiffener

(g) Back rest batten

(h) Remove the existing canning and supply and weave with 2mm thick new white plastic cane oval shape godrej patern and beading with 4mm thick new white plastic cane as apporeved by GE and providing new hard rubber/PVC shoes at the bottom of the chair.

(j) All as per item No 2.07 here-in-before but for chair dining

FD-277 Repair to Peg Table

(a) Remove the old unserviceable leg and providing the new leg made out of 1st class teak Wood seasoned of size 30x50x362mm high and fixing the same in its original position as per drg.

(b) Remove old broken top rail and providing the new top rail made out of 1st class hardwood teak of size 20mm x 40mm x380mm and fixing the same in its original position as per drg.

(c) Remove the old top and providing the new top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on peg table in its original position as per drawing and providing new hard rubber/PVC/Nylon shoes to the bottom of legs. Size of particle board shall be 450mm x 300 mm.

(d) All as per item No 2.07 here-in-before but for peg table.

FD-372/FD-241/FD-1115 Repair of side board

(a) Remove existing unserviceable legs of side board and Supply and fixing new legs made out of 1st class teak wood well seasoned all as shown on drg.

(b) Remove the unserviceable knobs of side board drawer and supply & fix new knobs as per existing size and all as shown on drg.

(c) Remove the unserviceable back ply from side board and supply & fix new plywood 6mm thick BWR as per existing size all as shown on drg.

(d) Remove the unserviceable shutters from side board and supply & fix new shutters made out of 18mm thick particle board exterior grade one side teak face and loumerical white all as shown on drgs.

(e) Remove of the old unsv existing drawers and supply and fixed new drawers made of 1st class hard seasoned teak wood free from knots duly french polished..

(f ) All as per item No 2.07 here-in-before but for side board.

(g) Removing of old unsv existing top of side board and S&F new top made out of prelaminated particle board one side teak face and other side loumerical white exterior grade with french polished teak wood edging all around .Rest all as directed and as shown on drgs.

FD-42(M) Table 900x600x760mm without drawer/with drawer FD- (FD-42(m) ,FD-41(m) FD-291, FD-284,FD-283)

a) All as per item No 6.03 here-in-before but for Table 900x600x760 mm without drawer / with drawer.

(b) Removing old u/s following components of table 900x600x760mm with or without drawer & S/F with new components made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg :-

(i) Legs (size 740x60x30mm)

(ii) Long rails (740x25x65mm)

(iii) Short rails ( size 440x25x65mm)

(iv) side rails (740x25x130mm) for FD/41/FD-284

(v) S& F new drawer

(c) All as per item No 2.07 here-in-before but for Table 900x600x760mm without drawer/with drawer.

FD-291 Table 900x900x760mm wdn

a) All as per item No 6.03 here-in-before but for Table 900x900x760 mm.

(b) Removing the following broken/damaged components/parts of table 900x900x760mm & S/F new components as under made out of Ist cl well seasoned teakwood all as per drg :-

(i) Legs of size (60x35x760mm long)

(ii) Top rails of size (75x25x900mm long)

(c) All as per item No 2.07 here-in-before but for Table 900x900x760mm .

FD-30(M) FD-1115 Table dinning 6 Pers.

(a) All as per item No 6.03 here-in-before but for Table dining 6 Pers

(b) Removing old & u/s legs of table dinning 6 pers & S/F new legs of size 740x60x60mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoe at the bottom of legs with mild steel screws complete all as directed & shown on drg.

(c) Taking out old & u/s long rail and S&F new long rail made out of 1st class well seasoned teakwood complete all as directed and shown on drg.

(d) All as per item No 10.03 here-in-before but short top rail.

(e) All as per item No 2.07 here-in-before but for Table 9dining 6 Pers.

FD-255 Teapoy verandah

a) All as per item No 6.03 here-in-before but for Teapoy Verandah.

( b) Painting to the steel frame of Teapoy Varandah with two coats synthetic enamel paint (1st quality) white after removing the old dirt stains and rust completely all as specified and as directed by Engineer-in-Charge.

(c) Removing of old u/s rubber shoes from Teapoy Verandah & S/F new rubber shoes of apporoved quality & fixed at the bottom of legs of Teapoy Verandah

FD-230 Table dressing gents with mirror

(a) Removing worn out u/s frame of mirror and replace the same with new one made out of well seasoned teak wood of size 19x25x2320mm as per drg.

(b) Removing worn out u/s back ply of mirror and providing with new one ply wood 6mm thick of size 380x760mm and fixing the same in its original position as per drg with clits on back.

(c) Removing the worn out u/s broken mirror and replace the same with new one of size 380x760x5.5mm thick and fixing the same in its original position as per drg.

(d) Removing worn out u/s top of table and providing the new one made out of pre-laminated particle board of size 900x300x 18mm and fixing the same duly beading in its original position as per drg.

(e) Removing worn out u/s back of table and providing the new one made out of 1st class teak wood plank of size 900x135x12mm and fixing the same in its original position as per drg.

(f) Removing u/s worn out side of the table and providing the new one made out of 1st class teak wood plank of size 300x135x12mm and fixing the same in its original position.

(g) Removing u/s worn out bottom of table and providing the new one made out of 1st class teak wood plank of size 900x300x12mm and fixing the same in its original position.

(h) Removing the u/s worn out face of drawer and providing the new one made out of 1st class teak wood plank well seasoned of size 285x125x12mm and fixing the same in its original position.

(j) Remove side of drawer and providing the new one of size 280x115 (Back side) made out of 12mm thick well seasoned 1st class HW(Teak) and fixing the same in its original position.

(k) Remove side of drawer and providing the new one of size 280x130 made out of 12mm thick well seasoned 1st class HW(Teak) and fixing the same in its original position.

(l) Removing u/s ply from the bottom of drawer and providing the new one of 6mm thick BWR plywood of size 290x265 and fixing the same in its original position.

(m) Removing the u/s knobs and providing/fixing the new one chromium plated knob 40mm and as directed by Engr-in-Charge.

(n) All as per item 2.07 here-in-before but for table dressing gents.

FD-251 Repair to Table Dressing Ladies.

(a) Remove unserviceable legs and providing the legs of size 150x45x45mm made out of well seasoned teak wood and fixing the same in its original position as per drg.

(b) Remove unserviceable stiffener and providing the new one of size 235x40x25mm made out of 1st class well seasoned teak wood and fixing the same in its original position as per drg.

(c) All as per item No 13.02 here-in-before but of size 650x40x25mm.

(d) Remove unserviceable top and providing/fixing the new one made out of 18mm thick pre-laminated particle board of size 900x380mm with 4mm thick teak wood beading on front side and fixing the same in its original position.

(e) Remove unserviceable side and providing the new one made out of 18mm thick pre-laminated particle board one side teak face and fixing the same in its original position.

(f) Remove side of drawer and providing the new one of size 330x115mm made out of 12mm thick well seasoned 1st class HW(Teak) and fixing the same in its original position.

(g) All as per item No 13.06 here-in-before but back of drawer of size 315x115x12mm as per drg.

(h) Remove the unserviceable ply wood from the drawer and providing/fixing the same with new one 6mm ply wood of size 315x330mm.

(j) Remove the knob and providing the new one chromium plated 40mm as approved/directed by Garrison Engineer and fixing the same in its original position.

(k) Remove broken sliding glass and providing new one of size 300x290x6mm as approved by Garrison Engineer and fixing the same in its original position.

(l) Remove the unserviceable aluminum channel double and fixing the same as per drg.

(m) Remove unserviceable mirror frame from its original position and providing the new frame made out of teak wood well seasoned size 3130x19x25mm and fixing the same in its original position as per drg.

(n) Remove the unserviceable broken mirror and providing the new one of size 1220x365x5.5mm thick as approved by GE/Engineer-in-Charge and fixing the same in its original position.

(o) Remove the ply wood from the back of the mirror and providing the new one made out of 6mm green ply BWR commercial and fixing the same in its original position as per drg.

(p) All as per item 2.07 here-in-before but for table dressing ladies

FD-278 Repair/polishing of Teapoy

(a) All as per item No 6.03 here-in-before but for Teapoy.

(b) Remove of the old unsv existing legs and supply and fixed new legs of existing shape and size made of 1st class hard seasoned teak wood free from knots duly french polished..

(c) Remove of the old unsv existing top rail and supply and fixed new rails made of 1st class hard seasoned teak wood free from knots duly french polished..

(d) Remove of the old unsv existing Short Rail and supply and fixed new rails made of 1st class hard seasoned teak wood free from knots duly french polished..

(e) All as per item 2.07 here-in-before but for teapoy.

FD-275 Table writing

(a) All as per item No 6.03 here-in-before but for Table writing.

(b) Taking out old u/s sides of table writing and S/F new sides made out of 19mm prelaminated particle board one side teak veneered complete all as directed & shown on drg.

(c) Removing of old u/s shutters of table writing and S/F new shutter made out of 19mm thick prelaminated particle board one side teak veneered bonded with phenol formaldehyde exterior gde including fixing of new or old serviceable hinges 50mm MS medium wt complete all as directed & shown on drg.

(d) Taking out old & u/s drawers from table writing and supply & fix with new drawers made out of prelaminated particle board & 1st cl well seasoned teakwood for sides & 6mm thick commercial plywood for bottom of drawers complete all as directed & shown on drg.

(e) Removing of u/s MS hinges from shutters and S& F MS butt hinges 50mm medium wt cold rolled mild steel.

(f) Removing of u/s knobs from shutters & drawers of table writing and supply & fix new 35mm round brass knob of approved quality complete all as directed.

(g) Taking out old & u/s plywood back of table writing & supply & fix new 6mm thick 5 ply plywood commercial BWR gde type BB fixed with 20mm mild steel screws complete all as directed & shown on drg.

(h) Taking out old U/S long legs of table writing and S&F new long legs made out of 1st classs well teak wood complete all as directed and shown on drg.

(j) All as per item No 15.08 mentioned here-in-before but short legs of table writing.

(k) Remove the old existing long stiffener of table writing and S&F new long stiffiner made out of 1st class well seasoned teak wood of existing shape & size and making functional.

(l) All as per item item No 15.10 mentioned here-in-before but short stiffners of table writing.

(m) All as per item 2.07 here-in-before but for table writing .

FD-220 Charpoy GI Pipe with ply top

(a) Remove the existing unserviceable Ply wood from Charpoy GI Pipe and making the frame to its original position by tightening etc and Supply & fixing with new ply wood 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.

(b) all as per item No 4.02 but for charpoy GI Pipe w/Ply

(c) all as per item No 4.03 but for charpoy GI Pipe w/Ply

(d) all as per item No 4.04 but for charpoy GI Pipe w/Ply

(e) all as per item No 4.05 but for charpoy GI Pipe w/Ply

(f) all as per item No 4.06 but for charpoy GI Pipe w/Ply

FD-281 Sofa set 4 Seater FD-281

(a) Removing of old worn out u/s front legs of sofa set 4 seater and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge.

(b) Removing of old worn out u/s rear legs of sofa set 4 seater and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge.

(c) Removing of old worn out u/s front rail of sofa set 4 seater and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge.

(d) Removing of old worn out u/s Back rail of sofa set 4 seater and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge.

(e) Removing of old worn out u/s back wdn bearers of sofa set 4 seater and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge.

(f) Removing of old worn out u/s bottom wdn bearers of sofa set 4 seater and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge.

(g) Remove the existing unserviceable sofa cushion from sofa set 4 seated and supply and fixing the new cushion 100 mm thick x 40 density of size 530x560mm covered with new tapestry cloth duly stitched.

(h) All as per item 2.07 here-in-before but for sofa set 4 seater.

FD-281 Sofa set 5 Seater FD-281

(a) All as per item No 17.01 here-in-before but for sofa set 5 seater.

(b) All as per item No 17.02 here-in-before but for sofa set 5 seater.

(c) All as per item No 17.03 here-in-before but for long piece of sofa set 5 seater.

(d) All as per item No 17.04 here-in-before but for sofa set 5 seater.

(e) All as per item No 17.05 here-in-before but for sofa set 5 seater.

(f) All as per item No 17.06 here-in-before but for sofa set 5 seater.

(g) All as per item No 17.07 here-in-before but for sofa set 5 seater.

(h) All as per item 2.07 here-in-before but for sofa set 5 seater .

FD-248 Table bed side w/o drawer

(a) Removing of old worn out u/s legs of Table bed side W/O Drs and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge.

(b) Removing of old worn out u/s sides of Table bed side W/O Drs and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge.

(c) Removing of old worn out u/s top of Table bed side W/O Drs and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge.

(d) Remove the existing unserviceable ply wood from Table bed side W/O Drgs and supply and fixing with new plywood 6 mm thick BWR IS-303.

(e) Removing of old worn out u/s shelves of Table bed side W/O Drs and providing /fixing new one made out of Teak wood well seasoned in existing shape and size and as directed by Engineer-in-charge.

(f) All as per item 2.07 here-in-before but for Table bed side w/o drawer.

FD-274, 375 Repair to Table Centre.

Remove the old unserviceable leg and providing the new leg made out of 1st class teak Wood seasoned of size 60x30x356mm high and fixing the same in its original position as per drg.

Remove old broken top rail and providing the new top rail made out of 1st class hardwood teak of size 20x50x900mm and fixing the same in its original position as per drg.

Remove old unserviceable top short rail and providing the new top rail of size 20x50x450mm and shape made out of 1st class HW well seasoned teak and fixing the same in its original position as per drg.

All as per item No 6.03 here-in-before but for Table centre.

All as per item No 2.07 here in before but for Table centre

FD-229/17(M) Repair/Re-canning of chair Easy Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.

(a) Front Legs

(b) Front rail of seat frame (Hole should be 12.5mm apart of each other)

(c) Side Rail(Ditto complete)

(d) Back Rail(Ditto complete)

(e) Arm Rest

(f) Remove the existing unserviceable canning and supply and weave with 2 mm thick new white plastic cane oval shape Godrej pattern and beading with 4mm thick new white plastic cane as approval by GE and providing new hard rubber shoes on legs below of chair Easy.

(g) All as per item No 2.07 here-in-before but for Chair easy.

FD-1009 Table 900 X900 X 760 mm steel

(a) Removing of old and unserviceable top of table 900 x900 x760 mm steel and S&F new top made out of 18/19 mm thick pre-laminated particle board (ISI Marked) exterior grade one side teak veneered finish and other side having balancing white lamination with 19 x 4 mm teakwood beading all around the top and polishing the wooden frame shall be with french polish(to the entire satisfaction of the Engr-in- Charge subject to minimum two coats ) including preparation of surfaces by scrapping /smoothing the surface all specified and shown on drawing .

( b) Painting to steel frame of table 900 x900x 760 mm steel by synthetic enamelled paint(min two coats) olive green colour including preparation of old painted surfaces by scrapping out old dirt staints etc to the entire satisfaction of Engr-in-Charge ( painting shall be done by using compressure spray machine)

(c) Electric welding to the broken /dislocated 25 x 25 mm square tube rails of tables 900 x900x 760 mm steel , length of welding exceeding 2.5 cm but not exceeding 5 cm ( each spots measured separately) thickness of metal to be welded not exceeding 6 mm , complete all as directed as Engr-in-Charge

(d) Removing old unserviceable rubber shoes from the legs of 900 x900x 760 mm and S&F new rubber shoes off approved quality and tightly fitted and the bottom of legs all as specified and shown on drawing

FD-280 Repair/Re-canning of Chair Writing Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.

(a) Front Legs

(b) Rear Legs

(c) Front rail of seat frame (Hole should be 12.5mm apart of each other)

(d) Side Rail(Ditto complete)

(e) Long Stiffener

(f) Back rest batten

(g) Arm rest

(h) Remove the existing canning and supply and weave with 2mm thick new white plastic cane oval shape godrej patern and beading with 4mm thick new white plastic cane as apporeved by GE and providing new hard rubber/PVC shoes at the bottom of the chair.

(j) All as per item No2.07 here-in-before but for chair writing.

FD - 237 / 45 (M) Repair of Book Case

Removing of exiting unsv top of book case and S&F new top made of prelaminated particle board one side teak face of exiting size 300x1065mm and making functional.

All as per item No 24.01 above but sides of book case of size (840x300mm).

Removing of exiting unsv door shutter and S&F new door shutter made out of 19mm thick particle board one side teak face of exiting size & shape. Door shutter will be fixed with 2 Nos hinges 50mm.

Removing of exiting U/S bottom plank and S&F new bottom plank one pc 19mm thick made out of first class hard seasoned teak wood duly french polished.

Removing of existing U/S leg and S&F new leg made of first class hard seasoned teak wood of exiting size duly french polished.

Removing of existing U/S shelves and S&F new 19mm thick shelf made of prelaminated Particle Board of existing shape and size.

Removing of exiting U/S bottom frame and S&F new bottom frame of existing shape & size made out well seasoned teak wood.

Removing of existing U/S knob and S&F new knob CP of size 50mm in round shape

Removing of U/S lock and S&F new locks of size 50mm.

Removing of U/S ply from back side of book case and S&F new ply 6mm thick BWR grade of existing size and shape.

All as per item No 2.07here in before but for Book Case

FD-233 Repair of Hat Stand

(a) Removing the existing U/S looking mirror from hat stand and S& F new looking mirror of existing size 460x300mm 5.5mm thick.

(b) Removing the existing U/S 19mm thick prelaminated particle board one side teak face and S&F new particle board of existing size duly supported with teak wood edging duly french polished allaround.

(c) Removing the existing U/S peg hook and S&F new brass peg hook of existing size & shape.

FD/MAP/04 Chair Dining Offrs Replace the following parts of Chair Dining Offrs as shown in drawing and directed by Engr-in-Charge

(a) Front leg of size 35x50x380mm

(b) Rear Leg of size 35x50x380mm

(c ) Stiffener of size 25x20x410mm

(d) S & F foam cushion of size 75x390x390 thick of 32 density with leather cloth (as per sample) for chair dining offrs.

(e) M& L for two coats of french polish on all visual surface (internal & external as shown on drg) including clamp & preparing the surface of the article complete all as specified and directed

FD-1028 Book Case Steel Replace the following parts of Book Case Steel Shelves as shown in drawing and directed by Engr-in-Charge

(a) Door made out of 1.00mm thick MS Sheet

(b) Sliding Roller with MS Channel 1.25mm thick

(c ) Glass 3mm thick

(d) Handle cromium plated 100mm

(e) Taking out of u/s worn out shelf and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg.

(f) Removing the worn out paint from internal/external surface of almirah steel large by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of Metal primer to bring the surface to a glossy shine as directed by Engr-in-Charge.

UNIQUE ENTERPRISE

Jaibalaji Enterprise

MS kesh and co

SARASWATI ENTERPRISE (INDEX NO CEEC D-81)