23/EEC/BSNL/CD/BGL/2025-26

Amount

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Old work (one or more coats)

Distempering with 1st quality acrylic distemper (ready mixed), having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

New work (Two or more coat over and including a coat of cement primer having VOC content less than 50 grams/ litre

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

one coat

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:

15 mm nominal bore.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe-32 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 453x357 mm

Providing and fixing C.P. brass water supply fittings with Wall Flange of approved quality and brand

15mm nominal bore Two Way bib cock with foam flow

15mm nominal bore Pillar tap with foam flow of approved make with matching flange

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length - 15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

100 mm diameter

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.

Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Cleaning of toilet intensively to remove dirt, hard water stains, yellwo sticky patches in the corners, of daddo tiles tile joints, W/C pan, W/B pan, water taps, exhaust fan, Gyser, flush tank etc. removing hard water stains, dirt deposit from floor tiles, with scrubing maching using soft fibre pads and application of sofetning chemicals, mopping out entire toilet & fittings with fibre cloth and placing in position toileteries removed for cleaning complete as directed.(Note- The work shall be carried out by specialised technicians having experince of intensive cleaning job)

All Bath/toilets of each Type V Quarter

Providing and fixing Stainless Steel grating 0.60mm thick grating for floor traps complete as directed.

100 mm nominal dia. circular type

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge.

With cement mortar 1:4 (1 cement : 4 fine sand).

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing on wall face HINDWARE Italian Collection Health Faucet of ABS Body including 1.20 Meter Long stainless steel flexible pipe & Wall Hook

Taking out existing wooden door shutter/ward robe shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

General cleaning of whole Type E staff Qrts (except washroom/toilet) intensively to remove dirt, stains, yellwo sticky patches in the corners and on all the floors, with scrubing maching using as directed & mopping of all the floors etc by using cleaning liquid and removing of cobwebs where ever formed on the walls etc complete as directed by the Engineer - in -charge.(Note- For cleaning of Bathroom/toilet , payment will be made through separate item)

Credit for:

Unserviciable Brass Bib/stop cocks/pillar tap

Providing and fixing mosquito proof mesh of approved make, netlon or equivalent with necessary velcro and fixing to the existing frame with available steel beadings and necessary screws, adhesive all complete as directed by Engineer-in-Charge

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed withC.P. brass screws and PVC sleeves etc., wherever necessary complete :

20 mm dia

Finishing walls with water proofing cement paint of required shade :

New work (Two or more coats applied @ 3.84 kg/10 sqm).

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

20 mm nominal outer dia. Pipes.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid