Repairs And Renovation Of Arulmigu Putharakameswarar Thirukoil At Puthukamr

Amount

Providing Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn/PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work. etc complete complying with standard specification and as directed by departmental officers. (TNBP. Specification.No : Special)

(Ht Upto 50'-0")

'(Ht Upto 25'-0")

Scraping the decayed lime plaster from the surface of vimanams/ wall carefully including isolated bricks or brick work without damaging the vari vargams, racking out the joints, cleaning the surfaces with water including all working in heights, hire charges for special tools, brushes etc complete complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : Special)

Restoration by providing herbal water wash(Combination of Venthayam powder 20%, Siyakai Powder 10%, Arapu powder 5%, Boonthi kottai powder 50%, Arugampul powder 3%, Nannari ver powder 3%, Vettiver powder 3%, Korai kizhangu powder 3%, and sembaruthi leaf powder 3% total 100%) are used for removel of lime wash on stone and oil smudge) and approrimats methodology to restore the originalities of the existing granite structure inclusive of hire charges scaffolding arrangements conveyance charges for tools & plants and machinaries to the workship spot and cleaning the site after completion of work etc complete complying with standard specification and as directed by the departmental officers.(TNBP. Specification.No : Special)

Pointing with lime mortar 1:1.5 ( one of lime and one and half of M. sand) with special grinding lime mortar using with Jaggary ,Galnut as directed including all labour charges, convenance charges tools and plants neat finishing curing etc complete compling the standard specification.(The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)(TNBP. Specification.No : 60 & special )

Removal of the tiles from the wall of sannathy away from the temple of the Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah etc., complete complying with standard specification and as directed by the departmental officers.(TNBP. Specification.No : 18 )

Clean Removal of plaster from walls and racking out joint 20 mm deep all labour charges forclean removal of lime plaster from wall ,etc., complete complying with standard specification and as directed by the departmental officers.(TNBP. Specification.No : 18 )

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Lime Mortor1:1.5( One of lime and One and Half of sand ) with special grinding with gallnut jaggary etc complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with special grinding Lime Mortor1:1.5( One of lime and One and Half of sand ) and finishing with final ornamental plastering and nayam theervai including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area. etc.complete complying with standard specifications and as directed by the departmental officers. (TNBP. Specification.No : Special) (Height upto 25'0") (The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)

Vimanam (Ht Upto 50'-0")

Vimanam ''(Ht Upto 25'-0")

Vinayagar ,Murugar sannathies vimanam 15'-0"

Plastering with lime Mortar 1:1.5 (One of lime and one and half of plastering sand), 12mm thick in all floors including neat finishing curing etc. complete complying with standard specification and as directed by the departmental officers (The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.) (TNBP. Specification.No : 56 &57 )

Painting with Egavarnam two coats of newly plastered wall surface withWater based Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.(The make ,quality , Shade and colour of paint should be got approved by the Executive engineer before use of work)(TNBP. Specification.No : similar to 66&66A)

Painting with multicolour (Panchavarnam) best quality water exterior Emulsion paints complete for the Vimanams/Gopurams, inculding cost and conveyence of all materials, labour charges inculding Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area. etc., complete complying with standard specification and as directed by the departmental officers (TNBP. Specification.No : 66 & 66-A& special)

Vimanam (Ht Upto 25'-0")

Supplying and filling in foundation, basement, etc with crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. (TNBP. Specification.No : 23,24)

Supplying & Paving flooring with cut stone of size 600 mm X 600 mm and another sizes suitable for site conditions with machine cut edges and not less than 100mm thick and fully dressed as directed by the departmental officers,and set in special grinding Lime morter 1:1.5 ( One of lime and One and Half of M.sand )using freshly burnt lime (cao not less than 75 %)with jaggaery,galnut as directed and pointing with same special grinding Lime morter 1:1.5 ( One of lime and One and Half of M.sand ) including cost and conveyance of all materials etc., complete Complying with standard specifications. and directed by the departmental officers (The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)(TNBP. Specification.No : 4&35 and special )

Single line fully dressed stones

Three line fully dressed stones

Removal of Existing cutstone carefully and stacking the material carefully at site usefull for reuse including all tools and plants and labour etc., complete Complying with standard specifications. and directed by the departmental officers (TNBP. Specification.No : similar to 18 & special )

Refixing and 'Paving with old cut stone including machine cutting , top surface is neatly dressed and pointing with lime mortar 1:1.5 ( one of lime and one and half of sand )including all materials and labour charges etc., complete complying with standard specification and as directed by the departmental officers . (TNBP. Specification.No : special )(The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete Complying with standard specifications. and directed by the departmental officers (The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)(TNBP. Specification.No : 44 )

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in special grinding Lime Mortar 1:1.5 (One of Lime and One & half of M.sand)12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers.(The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works.)(TNBP. Specification.No : 44-H)

Painting two coats of newly plastered wall surface withWater based Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.(The make ,quality , Shade and colour of paint should be got approved by the Executive engineer before use of work)(TNBP. Specification.No : similar to 66&66A)

Painting two coats of old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with of best approved first quality and colour of synthetic enamel paint over with one coat of priming coat with approved primer in all floors etc., complete complying with standard specification. (The make, quality ,shade and colour of paint should be got approved by the Executive Engineer before use on works.)(TNBP. Specification.No : 66&66-A )

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and including refilling the sides of foundations clearing and levelling the site, etc., complete complying with standard specification. SS20 B. (TNBP. Specification.No : 23)

Cement Concrete 1:2:4 (One Cement, Two crushed stone sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification and as directed by the departmental officers (TNBP. Specification.No : 28 )

Supplying & fixing best quality well seasoned Teak wood temple type ornamental door in various sizes and required height with 2'' minimum and 7'' maximum thick ornamental frames as per approved palns and design and as directed including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc complete complying with standard specifications and as directed by the departmental officials (TNBP. Specification.No : similar to 72&74 )

Swamy sannathy (4'x7')

Amman Sannathy (3'X6')

Painting two coats of new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with of best approved first quality and colour of synthetic enamel paint over with one coat of priming coat with approved primer in all floors etc., complete complying with standard specification. (The make, quality ,shade and colour of paint should be got approved by the Executive Engineer before use on works.)(TNBP. Specification.No : 66&66-A )

Providing new sudhai vigrahams in the vimanams and Rajagopurams with Copper rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in lime morter 1:1.5 ( one of lime and one and half of M.sand ) finishing the same with lime morter 1:1.5 ( one of lime and one and half of M.sand ) bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing C.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and Copper rods. binding wire all labour for working in heights, curing lifting of materials etc., complete including Exterior Emulsion painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is provided the rate with peetam may be adopted as detailed hereunder) (Sudhai Size 1'-6" to 2'-6") (TNBP. Specification.No : Special)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated Single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End (Data A)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated Single core unsheathed copper conductor of 1100V grade in suitable Powder coated MS duct with door arrangements on wall and ceiling with accessories with Module GI switch box on wall with wall with 6A one way module switch with module front plate for open MS duct Light point / fan point (for electronic regulator ) (5 points / Coil ) Higher End (Data B)

Supply and fixing of 4' 20W single LED Battern with LED complete on wall or ceiling with TW round blocks with PVC unsheathed Copper leads from terminals to the fitting. (Data C)

Supply and fixing of 18W LED square type fitting with LED (Higher end) on Ceiling with suitable support from ceiling with PVC unsheathed copper leads from terminals to the fitting. (SD 441)

Supply and fixing of fancy glass shade and 7W / 9W LED Bulb (SD 79)

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600mm down rod on the existing fan clam (SD 502)

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall (SD 115)

Supply and fixing of louvers shutter arrangements for 300mm (12")sweep (light duty) AC exhaust fan(SD 120)

Supply and fixing of 450mm 18" Wall Fan (Air Circulator) with Pillar Clamp 1 1/2 x 1/4 MS flat with bolt and nuts for fixing the Fan on pillar with neccessary connection. (Higher end-like Almonard / equilent) (Data D)

Supply and run of 50mm x 38mm raceways powder coated duct with cover arrangements complete with MS angle and bolt & nuts complete. (Data E)

Supply and run of MS flat with nitrle rubber insulation for clamps of size 2' x 1' on pillar with suitable Bolt / nuts and painting of suitable colour. (Data F)

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling or in existing duct with continuous earth wire connection of 2.5 sq.mm. Copper wire with painting of suitable colour. (SD 336)

Supply and run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall with continuous earth wire connection of 4 sq.mm. Copper wire with painting of suitable colour (SD 56)

Supply and fixing of 2 nos. 6A two module 5 pin socket, 2 nos. 6A one module switch on suitable module surfarce mounting box (Plastic) with module cover plate (plastic) on wall with connection. Higher End (Set plug) (SD 379)

Supply and fixing of 1 nos.6/16A two module socket, 1 nos.16A one module switch on suitable module surfarce mounting box (Plastic) with module cover plate (plastic) on wall with connection. Higher End (Set plug) (SD 379)

Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) (SD 143)

Supply and fixing of 30W LED focus fitting complete on suitable MS angle with suitale MS clamp. (Data G)

Supply and fixing of 100W LED focus / Flood light fitting complete with 1" dia GI pipe supports between the walls with suitable MS clamps, painting and electrical connections complete. (Data H)

Supply and fixing of sintex box (SMC) with 1 no. 6-32A SP MCB, 16A bakelite connector on hylem sheet with inter connections complete. (For street light lights / focus / flood lights ) (Data I)

Supply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD 664)

Supply and clamping of 3 1/2 x 120 sq.mm. PVC LTUG armoured Alu cable on post or on wall with MS Clamps. (SD 205)

Supply and fixing of brass cable gland for 3 1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection. (SD 169)

Supply and providing cable end temination of 3 1/2 x 120 sq.mm. PVC LTUG aluminum armoured cable with neccessary aluminium cable sockets by crimping etc with electrical connection complete (SD 218)

Supply and clamping of 3 1/2 x 25 sq.mm. PVC LTUG armoured Alu cable on post or on wall with MS Clamps. (SD 200)

Supply and fixing of brass cable gland for 3 1/2 x 25 sq.mm. PVC armoured LTUG cable with cable with earth connection. (SD 164)

Supply and providing cable end temination of 3 1/2 x 25 sq.mm. PVC LTUG aluminum armoured cable with neccessary aluminium cable sockets by crimping etc with electrical connection complete (SD 213)

Supply and Lalying of 2 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (Data J)

Supply and clamping of 2 x 10 sq.mm. PVC LTUG armoured Alu cable in on post or on wall with MS Clamps. (SD 194)

Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection. (SD 160)

Supply and fixing of 32A DP MCB in sheet steel enclosure box with electrical connections complete. For street light control (Data K)

Supply and fixing of 8 way single pole and neutral MCB Sheet steel enclosure distribution board with double door (Metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD 501)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD 522)

Supply and fixing of 100A (500V) three phase meter box fabricated with 16 SWG CRCA sheet comprisiong of with 3 nos. of 63A fuse units, neutral link. 1 no. 100A TPN switch disconnector fuse units with HRC interior only, provision for fixing TNEB meter with inter connections and with required accessories on wall complete. (Data M)

Supply and erection of 1 No. 250 Amps floor mounted cubical pancl board fabrication out of 14 SWG sheet steel, dust and vermin proof, suitable for operation on 440A, 3 phases, 50Hz AC supply with bus bar chamber comprising of 4 nos. 1" x 1/4 copper flats for RYB and neutral with 2 nos. 1" x 1/4 copper flat for earth bus to be provided at the cubical. The following cubical TPN switch with fuse and neutral link. 250A FP MCCB -1 no's (L&T/Siemens) as incoming and 63 A TPN MCCB -6nos's (L&T/Siemens) Multifunction meter - 1 no the main switches to be interconnected with the bus bar with suitable rigid tinned Copper with necessary hylum sheet separators between bus bars, main switch etc and with double earth connection of the main switches. The panel board to be painted powder coating with stencil making of the main switches etc with name, capacity, cable size etc.'The capacity of the MCCB size of incoming and outgoing cable the place to which the supply is fed should be mounted on switch chamber. The panel board should be mounted on 100mm x 50mm MS channel provided all around the bottom of the panel. The whole arrangement should be erection of an angle iron frame pedestal to tbe constructed with suitable foundation bolts and nuts such that the lowest switch handle is at a height of 1.0 m from the ground level and with neccessary earth connection. (Essential Panel) (Data N)

Supply and fixing of 65 mm dia. (2-1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duty welded at the bottom with concreting with constrsction of mansonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia/ GI pipe (class B) complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour. (SD 456)

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD 658)

Supply and clamping of 4 x 16 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps. (SD 199)

Supply and fixing of brass cable gland for 4 x 25 sq.mm. PVC armoured LTUG cable with earth connection. (SD 163)

Supply and providing cable end termination of 4 x 16 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (SD 213)

Earthing as per the ISI specification with an earth electrode of 2.10 metre class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necesaary mansory work and with 38mm RCC cover slab for the brick mansory. (SD 211)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection. (SD 371)

SUB TOTAL

R. Ashokkumar (BID ID -1394907)