eoi for Engaging of agency with Municipal Corporation Gurugram for the purpose of Developments Maintenance Beautification Landscaping and other similar civic amenities works under Municipal Corporation Gurugram

Amount

EOI for Engaging of agency with Municipal Corporation Gurugram for the purpose of Developments, Maintenance, Beautification, Landscaping & other similar civic amenities works under Municipal Corporation Gurugram.

Providing and laying 3/4"dia G.I pipe line.

Providing and fixing 3/4"dia Hydrant connection

Providing an fixing of Gate valve for Hydrant connection.

Supply of RH Pipe 1" dia.

Supply of Vermi Compost Khad. (50 Kg Bag)

Providing and fixing mono block motor 1HP and make Texmo complete in all respect

Providing laying grit wash consisting of 12mm coarse sand plaster and 5mm to 10mm Narnaul/ Dehradun etc. quarry mix with in 3 parts of cement…..

(i) 6 No. Ornamental Design FRP pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 15mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 89 mm and height 2890mm, the central m.s pipe having FRP capital suitably mounted at appropriate height complete as per design enclosed. Complete pillar suitably grinded spray primered and subsequently spray painted with two coats of enamel paints is required shade. (ii) 12 No. spndred and 6 no. Friezes Floral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two m.s pillars as per the design copy enclosed. The spandrel (L-Bracker) having length 310mm and height 300mm the frieze (Top Panel) height 220mm and length as per the size of the gazebo. The frieze mounted on m.s tabular pipe frame of size 40mm x 25mm, frieze properly welded to the column pollars at either ends. Complete set of spandrel & frieze uniformly grinded spray primered, spray painted with two coats of enamel paint. (iii) 3 No. cast iron base panel railing with frame Floral and Ornate decorative design cast iron side railing panel as per design copy enclosed having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 40 x 25 mm. the bottom mild steel pipe having 3 nos. of hold fasts in m.s pipe of size 40 x 40mm and length 50mm welded at the base to hold the panel in the ground. The complete railing panel grinded for neat surface finishes spray primered and subsequently spray painted with two coats of enamel paint in required shade. (iv) One set of top frame with frp roof Top frame in m.s tubular pipe of size 40 x 40mm properly welded and grinded. The top frame mounted with FRP molded Sheet of 2 mm thick bent to profile on either ends with clear width installation of frp sheets fixed horizontally along the length between column pillars. Each sheet enamel painted in red color on both sides. Each such sheet properly riveted to horizontal sheets. The roof pipe frames properly primered and painted in red color. The complete item is without C.C floor & without sitting bench. rates are including with all taxes.

Seated chest press: Providing designing and fixing of seated chest press in a pair of size 1800 x 700 x2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete or minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base plate and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).

Air Walker: Providing designing and fixing of Air Walker of size 1100 x 550 x 1480mm fabricated with main post of 114mm dia and 2.5mm thick and rest of pipes or 40mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped gaivahized and powder coated 80-120 micron thick using Akzo Nobel or equivalent in desired shade and colour. All welding joints or pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all the welding points prior to finishing. All open ends of pipe to be closed with GI/ LLDPE caps base plate cover shall be made or virgin LLDPE plastic by rotational moulding with minimum 3mm thickness UV resistant and colour as approved by Engineer in charge. High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments maufactured by reputed company duly oil sealed and self lubricated to be approved by Engineer in charge. The equipment shall be fitted with in built limiters. The equipments shall be fixed on ground with concrete or minimum strength M-25 and J shaped welded bolts and when concrete is set fixing the equipment on to it and cover nuts and bolts with base plate cover all complete as per directions and approval of Engineer in charge regarding material shape of equipment colour all complete as per directions and approval of Engineer in charge regarding material shape of equipment colour (of metal seat and pedal) and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).

Rowing machine: Providing designing and fixing rowing machine of size 1280x800x1150 mm fabricated with main past of 114 mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colourful and UV resistant and environmental friendly. Bearing used shall be maintenance free duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipments to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover with the base plate A.I complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base pedal and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).

Leg Press: Providing designing and fixing of leg press of size 2000x550x1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micror thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars to be provided with high quality grip rubber on top end Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free duly oil sealed and selt lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitteed with in inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipments to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base cover plate and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).

Elliptica exerciser: Providing designing and fixing elliptical exercise of size 1200 x 540 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete or minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base plate and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).

Air Swing: Providing designing and fixing air swing in pair of size 1150 x 900 x 1250 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete or minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base plate and fixing of equipments etc (the cement concrete and excavation work shall be paid for separately).

Arm and ShoulderWheel:- Providing, and fixing Arm and Shoulder Wheel of size 130 X '1200 X 1350 mm make of Green Gym or Equivalet fabricated with main post of 140 mm dia and 3.0 mm thic rest of the pipes are 40mm dia and 2.5 mm thick all pipc made up of hot roiled tubular steel and hot dippe galvanized, and powder coated using Akzo Nobel c equivalent of 80-120 micron thick. All welding joints of pip are robotic welded with joints scalloped as necessary an dressed off removing sharp edges and burrs. Zinc prime paint to be applied at all welding points prior to finishink Padals shall be made up of Nylon alloy with rounded edg of prevent any impact of injury and seat to be made fror virgin LLDPE manufactured by rotational moulding wit minimum thickness of plastic 4.00mm, colourful and resistant environmental friendly. Bearing used shall b maintenance fire, duly oiled sealed and self lubricated mad bY reputed company to be approved by Officer -in-Charge Equipment to be fitted within built limiters to preven unwanted movements. All open ends of pipe to be colourel by GI/LLDPE caps for user safety. The equipment to b fixed on ground with concrete of minimum strength M2: nd J shaped welded bolts and once the concrete is set, ft ;he equipment on to it and cover nuts and bolts with the bas Mate cover, all complete as per direction and approval o -2,ngineer-in-Charge regarding material, shape of equipment olour on metal, seat and base cover plate and fixing o equipment etc.

Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X 600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength N425 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Pull Chair:- Providing, and fixing of Pull pair of size 2500 X 800 X 2000 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 3.0 mm thick all pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc .primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be' made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GULLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Horse Rider Station:- Providing, and fixing of horse rider station of size 1000 x 600 x 1100 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Alczo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and a. .royal of arge regari ing materia , s ape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Arm Wheel/ Shoulder Wheel:- Providing, and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resi3tant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of cer-in- arge regar ing mate= , s ape o equipment, colour on metal, seat and base cover plate and fixing of e uipment etc.

Knee HIP Raise:- Providing, and fixing Knee Hip Raise of size 1105 X 550 X 11480 mm make of Green Gym or Equivalent fabricated with main post of 140 rum din and 3.0 mm thick rest or the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Mao Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. PadaIs shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Officer-in-Charge regarding material, shape of equipment, colour on metals_sea and htme pnver plate and fixing of equipment etc.

Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and ishapod welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Officer -in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of. equipment etc.

Chain Swing (2 seater): 10’L x 5’.5W x 8’.5 H. Horizontal frame & vertical legs is of m.s pipe 2” x 12 gauge. It stays with m.s pipe 1” x 12 gauge. Swinging seats-2 nos is of FRP molded Seat of 2mm thick fitted with m.s pipe ½” frame x 12 gauge which hang with m.s chain 6mm thick duly plated with ball bearing & m.s flat 6mm thick housing with suitable PU Primer & PU Paints.

Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of m.s pipe 1” x 12 gauge & m.s rectangular pipe 65 x 25 mm box X 16 gauge as climbing steps which support with 1”.25 sq. pipe x 14 Guage with suitable PU Primer & PU Paints.

Sea-Saw (4 seater): 8’ L x 5’.5 W x 15” high. Frame is of m.s pipe 2” x 12gauge. Sitting planks is of m.s pipe 2” x 12 gauge and its cantilever & handles is of m.s pipe ¾” x 12 Guage .Sitting seats-4nos is of molded FRP material in 3mm thick with suitable PU Primer & PU Paints.

Multi Play Spiral-N-Tunnel Station Item code: ME-03 Covering Area: 30’L x 20’W It contains: FRP Spiral Slide 6mm thick inclined at 5’H – 1 no FRP Tube Slide inclined at 5’H – 1 no FRP Wave slide 6mm thick inclined at 5'H - 1 no FRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3’H – 1 no FRP Stair 3mm thick inclined at 3’H- 1 no FRP Platform Hex. Shape 5mm thick in 7’Dia – 2 no. FRP Canopy – 2 no. FRP Deer Figure on canopy – 2 no. FRP Fancy Railing Frog & Monkey Shape – 4 no. FRP Walking Bridge 7.5’ Long – 1 no. M.S Spring Climber – 1 no. M.S Zig-Zag Climber – 1 no M.S Chain Net Climber – 1 no M.S Climbing Ladder – 1 no M.S Station in which vertical m.s pipe is of 3” x12G of I.S.I Mark – 2 no

Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of m.s pipe 2”, ¾” & vertical ladder is of same material of 12 gauge ISI mark with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

Merry-Go-Round (4 seater): 5' Dia. Main frame is of m.s sq. pipe 2" x 2" x 14 G and having suitable handle & foot-rest is of m.s round pipe 3/4" x 12 Gauge. Central pipe is of m.s pipe 3" x 12 G which further supports with m.s pipe 1” x 12Gauge with heavy duty shaft 50 mm thick & ball bearing assembly. It consists of 4 no Chair made of Molded FRP Plastic in 3mm thick with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

Swing Two sitter made of 3" OD ERW special pipe of 16G. Height of 4 vertical legs of 90"& Top Horizontal bar of 8' length of 10G3" OD pipe. Seat of Heavy Chequered Aluminum sheet suspended with durable 8mm tested chains. All duly Anti Rusting red Oxide primered before spl.PU paints. Vertical legs of height 10'. Top horizontal bar length 10' of 10G heavy pipe. All duly anti Rusting Red Oxide primered before Special Multicolored P.U. paints.

Multiplay double step children play way equipment size 25'(L)x11'(W)x12'(H)Frame made of 2" OD 16gauge tubular pipe for safety.One side with the provision of curved climber. Front single seater Swing attached to bridge between two step. Bridge made of 1 ¼” x 3/16" angle iron with flat strips and fencing of 1"x16 gauge special ERW tubular pipe. Two durable fibre slides provided with platform of 10'(L)x 20""(W). Two domes of durable fibre on top. In shape of pineapple, strawberry, hut type etc. All duly multi colored W/R PU coating paints.

Playway equipment(single step) size 15'(L)8'(W)x12'(H) frame made of 2"x16 SWG tublar pipe with support of 1 ¼” 16G platform made of 18G white metal chequared sheet frame fabricated with 16G CRC sheet and covered with 1" tubular pipe for safety one side with the provision of sliding chute of durable fibre slide of size 10'x20" and other two side with ladders curved and straight. one dome in shape of strawberry. All duly multicolored with PU coating paints.

Lion Face Slide:- with free entry for Kids Through Lion Face best quality of size 120"(L)x20"(W)x108"(H) durable steel supports of 11/4 " 16G under slide for extra durability complete with stel stair made of 11/4", 1½" ERW special round pipe of 16G and supports of 1 round pipe. Complete with 8 footsteps and top Chequered Aluminium 16G sheet platform. Total lenght 168" form stair to slide. All duly anti rusting Red Omide primered before PU spray paint in multi colours

Swing two Seater made of 45 mm Frame of special E/R.W. Square Pipe of 16G in Size 10'(H) and top of 10' Length of 12G. Height Supported With same pipe for Grouting for extra Durability Seats of 18G Chequered Aluminum Sheets fixed on angle Iron Frame Suspended with 8mm Tested chain. All duly anti Rusting Red Oxide Primered before long lasting P.U. paints.

Funnyman (as dustbins) made of Durable Fibre Composition in size (W)60x(D)50cm. Height of 76 cm with special PU with special PU Coating Paint with hanging Provision fixed on 3" Pillar Base.

Elephant(White) for children amusement & playway made of pole marble/High Density fibre in size 15'(L) and 9'(H) with the systems of two stairs on both sides and slide in Built with canopies to give excitement of (caves),to provide Cross entries and exit. Poly marble and heavy steel used for various parts of the total structure of Elephant, matching colors For parts other than those in white

Dinosaur for children amusement & playway made of poly marble/High Density fibre in size 16'(L) and 7'(H) finish of rugged features of the giant Monster with natural touch with built one Slide & 2 stairs on both sides.

Unique Tomato Shape Playway Mechanically moulded in size 48"(H)x52"(W)x168"(Circumference) complete with two durable double face fibre slides of size 82"(L)x22"(W) attached with aluminium chequared 16G sheet platforms and on one side steel stair for entry made of 72mm x22mm ERW pipe of 16 SWG duly Multicolored. Base pillar for grouting system of 6" O.D. 16 SWG. Duly anti rusting Redoxide primered before PU paint.

Spring Jumbo : Symmetrical Body is of FRP Plastic of 2mm thick attach with heavy Duty Spring System and m.s plate 5mm thick with suitable PU Paints and artistic painting. Complete item with GST, Transportation, Installation with C.C & labor at site.

Giraffe Slide (FRP Plastic Body): 11’L x 2’W. Body is made of molded fiberglass reinforced plastic of 3mm thick with 450 grade fiberglass & ISO resin and also mix with cobalt & catalyst to give body good strength. Slide is 8’long x 6mm thick which connected with m.s platform is of m.s angle 40 x 5mm which laid with FRP cheqred sheet of 5mm thick with suitable PU Primer & PU Paints with artistic painting. Complete item with GST, Transportation, Installation with C.C & labor at site.

FRP Spiral slide at 5' Height. Covering area: 9'L x 5'W It contains:- FRP molded spiral slide without any joint of 6mm thick at 5' ht. with M.S. central pipe 4"x12 gauge-1 nos., M.S. platform made of MS rectangular pipe 65x30mmx2mm thick laid with FRP chequred sheet 5mm thick-1 nos., MS safety railing made of MS pipe 3/4" & 1/2'' x 12 gauge-2 nos., MS climbing ladder made of MS rectangular pipe 65x25mmx14 gauge support with MS safety railing is of 3/4" MS pipe of 12 gauge-1 Nos. with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

Multiplay Single Station Covering Area: 13’L x 4’W It Contains: FRP Wave slide 6mm thick at 5’H-1no. FRP Square Canopy 2mm thick-1no. FRP Platform 3’.5 x 3’.5 x 5mm thick-1no. M.S Vertical Station made of m.s pipe 2”.5 x 12G-1no. M.S Zig-Zag Climber-1no. M.S Climbing Ladder-1no. Complete item with GST, Transportation, Installation with C.C & labor at site.

Multi Play Double Station Covering Area: 24’L x 13’W It contains: FRP Spiral Slide 6mm thick at 5’H – 1no. FRP Wave Slide 6mm thick at 5’H – 1no. FRP Window Canopy 2mm thick -1no. FRP Fancy Railing-4no. FRP Butterfly-1no. FRP Fish-1no. FRP Platform 3’.5 x 3’.5 x 5mm thick-2no M.S vertical station of m.s pipe 2”.5 x 12G-2no. M.S Ladder-2no. M.S Railing-2no. Chain swing (2seater)-1no. Complete item with GST, Transportation, Installation with C.C & labor at site.

Ocean wave Climber size 8'(H)x16'(L)x6'(W), outer frame made of 1 ½ " x16 SWG tubular pipe special ERW and rest of the part of climber is made of 1 ¼ " x 16 SWG tubular special ERW pipe. All duly anti rusting Red Oxide primered before spray paint of PU coating.

FRP Dustbin - Animal figures made of FRP moulded plastic of 2mm thick of approx.size 48”H with having 1no inlet and outlet with suitable PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

Providing and fixing dustbin of polymer concrete of total height 1200 mm top cover size 450x435 mm with clear opening of 390mm x170mm base size 390mm x 390mm consisting of 1) polymer concrete container. 2) polymer concrete top container cover. 3) polymer concrete waste access cover. 4) polymer concrete waste. All components are manufactured by using M-30 grade of concrete. All components are manufactured with full MS caging for added strength and durability. All components are treated with special anti corrosive water proof coating so as to make surface glossy and water proof. Trash in corporate with 50mm dia GI pipe at the container and it comes out from the base erect grouted in the ground with the help of GI pipe 1.5 ft filled with concrete.

FRP Dustbin (Penguin Shape) - Animal figure made of FRP moulded plastic of 2mm thick of approx.size 48”H with having 1no inlet and outlet with suitable PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

FRP Dustbin (Rabit Shape)- Animal figure made of FRP moulded plastic of 2mm thick of approx. size 39”H with having 1no inlet and outlet with suitable PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

FRP Dustbin (Monkey Shape)- Animal figure made of FRP moulded plastic of 2mm thick of approx. size 48”H with having 1no inlet and outlet with suitable PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

FRP Dustbin (Gentleman Shape) - Animal figure made of FRP moulded plastic of 2mm thick of approx. size 36”H with having 1no inlet and outlet with suitable PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

FRP Dustbin (Frog Shape) - Animal figure made of FRP moulded plastic of 2mm thick of approx. size 41”H with having 1no inlet and outlet with suitable PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

FRP Dustbin (Tilting Type) of capacity 60 LTR. Body is made of moulded fiberglass re-inforced plastic of 2mm thick having its lid with handle. It fitted with m.s square pipe 1.25” x 1.25” x 14 gauge & m.s flat 50 x 5mm, 30 x 5mm base structure with suitable PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

Jungle Gym: 6’Height x 3’ Hex. Edge Width All Tubular Structure made of m.s pipe ¾” x 12 Gauge ISI Mark and the base of the Jungle Gym is of m.s angle 40 x 40 x 5mm with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

Discription of canopy in Dholpur stone of 12' dia 1. Base flooring - 4''x15'' = 452 sqft. 2. Side Cladding - 1''x18'' = 113 sqft. 3. Pillars with carving - 10''x10''x96'' = 8 nos. 4. Roof terace at the top of pillars - 2''x18'' = 113 sqft. 5. Canopy beam lower - 7''x10'' = 75 sqft. 6. Canopy beam upper - 4''x15'' = 75 sqft. 7. Arch with carving - 3''x30'' 8. Height of the canopy from the top of the pillar - 9' Including of all type loading unloading vehicle and all type fixing materials and labour & taxes.

(i) 6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 88 mm and height 2890mm, the central m.s pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U Paints in required shade. (ii) 12 No. spndred and 6 no. Friezes Floral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two m.s pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on m.s tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel & frieze uniformly grinded spray primered, spray painted with P.U Paints. (iii ) 3 No. cast iron/frp base panel railing with frame Floral and Ornate decorative design cast iron/frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in m.s pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing panel grinded for neat surface finishes spray primered and subsequently spray painted with P.U Paint in required shade. (iv) One set of top frame with Double Finishing FRP Molded Plastic Sheet roof Top frame in m.s tubular pipe of size 40 x 40mm properly welded and grinded. The top frame mounted with FRP molded Sheet of 4 mm thick with top & bottom good finishing (Double finishing sheet) to make it rust proof bent to profile of size 245mm width in -Z- section on either ends fixed horizontally along the length between column pillars. Also it contain FRP Moulded Ball of 14”Dia x 2mm thick at the central top for its beautification. Each sheet enamel painted in red color. Each such sheet properly riveted to horizontal sheets. The complete item is fitting at site with installation. (Including fixing at site and supervision & transportation & all type taxes)

Supply of tractor/ tanker (for 24 hours) and trolley with driver (day shift) with diesel (including all type of maintenance)

Supply of Mahindra Pickup VAN (for 24 hours) with diesel with driver (day shift) including all type maintenance

Supply of Labour/ Helper (male)

Tractor Driver

Anslysis for providing and fixing grill size of hollow pipe 40mmx40mm in M.S pipe

Supply of grass grid tiles of all colors and all design M-35 grade (size 600x400x70mm) with 8mm thick steel wire as per complete specification.

Stage border with orchid, lily, gerbera, and rose

Stage decoration at Tau Devi Lal Stadium.

Marigold Garland size

Ashoka leaves Garland size 6'' ht

Hanging bouquet of rose, gerbera lilly & orchid etc.

Table bouquet rose, gerbera lilly & orchid etc.

Flower bunch of rose, gerbera lilly & orchid etc.

VIP wreath

Normal wreath

Decoration of John Hall

STMP-26 Ultra (22 HP Engine) Self Propelled tree maintenance platform machine (with Hydraulic Chain Saw Pruning tool) Machine weight=1900 kg Working Height=8000 mm Platform Size=510x510x950mm Platform load=145 kg Overall length=7900 mm Overall width=2650 mm Platform Capacity=Single Operator Max. Hydraulic System pressure=180 bar Max. Hydraulic System Flow=27 liters Fuel tank Capacity=16 Liters approx. Hydraulic tank Capacity=20 Liters approx. Engine=22 HP Water Cool Diesel Engine Tyre Size=31x15.5x15 with 18 months warranty and all type transportation charges

Supplying , assembling, lowering and fixing MS frame in horizontal position stand and fixed in the walls of flyover with fastners including required hire and labour charges, fitting & accessories etc.all complete for all depths as per direction of engineer-in-charge.

Unique Green wall of UV protected plastic material specially designed to keep the centre of gravity of growing planting within the planters within line of foam sheet keeps the percolation holes unclogged forever, easy to replace manually size cater4-5 plants per sqft area.

Supply and placing of planting media compose of organic fertilizer like composted crop residue , verme compost, wood ash, poultry manure, cow urine etc. lighter than the soil, with good moisture capacity and used to ensure that kg per sqft load on vertical wall should be optimum. (Planting media per planter is 1.5 kg)

Supply and installation of a combination of 52mm and 25 mm PVC drip pipes, using drippers of 8 LPH discharge, using drippers which can be un-screwed and cleaned in case of salt accumulation.

Supply and installation of water filter with Motor pump set with panel.

Installation charge for complete vertical garden

12" earthen pot machine make Top dia 12", base dia 8"

One set (10",8" & 6") earthen pots with following specifications: (i) 10'' top dia & 7½'' base dia. (ii) 8'' top dia & 5½'' (iii) 6'' top dia & 3½''

Digging of pits size 0.90x0.90x0.90mtr

Supply of Jamuna sand

Providing and fixing of SS gate 304 Grade

Providing and fixing of wire mesh jali duly fabricated interlock 2`` x 2`` jali size 10 gaugeand fixing with L-iron, M.S flats etc. embedded in cement concrete blocks with gas welding, nuts and bolts and screws etc. as per design and drawings complete fixed in position to the fill satisfaction of the E.I.C. The rates excluding the cost of L- iron M.S. flat and conc. which is payable extra. The rates including the cost of cutting of jali in the required shape and size and wastage etc. Nothing extra shall be paid over this rate.

Elephant sculpture made of Dholpur stone of size length 90",breadth 36" & height 70", complete in all respect with transporation & fixing at site.

Victorial Steel sitting bench of size 61"(L)x29½” (H)x 18½” (D). Seat with 5 steel pipe and back with five steel pipe of size 47mmx23mm rectangular of 16 gauge ISI mark e.r.w. spl. Pipe fixed with C.I. frame on both sides with durable nut-bolts duly welded to protect it unscrew. All duly anti rusting Red Oxide primered before P.U. bus green spray paint coating long lasting. (Including all taxes)

SUPPLY OF PRECAST CONCRETE RCC BENCHES HAND REST OF SIZE 1500MM MANUFACTURED BY M-30 GRADE OF CONCRETE. CONCRETEPLANKS IN RED COLOUR SIZE MMX400MMX50MM AND 1NO.OF CONCRETE PLANK IN RED COLOUR SIZE 1500MMX 425MMX50MMEACH BENCH CONSIST OF 2 NO.L SHAPE BASE FOR IN GREY CEMENT COLOUR THICKNESS 80MM BACK HEIGHT 890MM FRONT HEIGHT 450MM SITTING LENGTH OF BENCH 1500MM SITTING HEIGHT 450MM TOTAL HEIGHT 890MM

Fiber Reinforced concrete Planter with Integrated Bench:- Supply of fiber reinforced concrete planter with integrated bench,Base sitting platform of size 1590mm dia, with wooden finish, height of planter 645mm, top dia of planter 900mm, thickness of sitting bench 50mm

Generator set 62.5 KV without Diesel

Generator set 125 KV without Diesel

Portable Toilet with 1 sweeper each Toilet

Concertina round wire 2' dia

Lethal

N.P.K. Fertilizer

Magnesium Sulphate

Nuvan Insecticide

Rainvos

Neem-EM

Adhunik-505

Adhunik Chamatkar

Rogor

Poinsettia Plant in 8" plastic pot

Fiber 8" White pot

Fiber 10" White pot

Fiber 12" White pot

Repairing/ Rewinding of 10 HP motor 10 stage Submersible Pump set including material & labour complete in all respects.

Repairing/ Rewinding of 7.5 HP Submersible motor pump set including material & labour complete in all respects.

Supply of Panel Bord Hut Type water Proof for 10 HP to 15 HP star delta BCH/L & T make complete

Submersible Cable 6 Sqmm 3 Core copper finolex make

G.I. pipe 2" with both side flange welding

Lifting and lowring of pump set with machine or chain pully

1.5 HP Self Priming Centrifugal Pump WBK15 (HONDA make)

Satan Flag with stiching. Size. 1.25x1 mtr.

Burger Paint

Tarpin.

Guldwari Flower 12" Pot.

Ms Pipe 20 mm. Per Length

Providing and fixing of SS Grill 304 grade

Providing of dholpur grill size (24''x37") qft

Labour rate for fixing of grill including of material (white cement red colour & araldite

Providing and fixing of dholpur pillar size 3' ht

Chainlink fencing with 50x50x2.6 mm wire with zinc coating on wire 2.7Kg/m2 Span of two angles in 1.8 mtr so cost of 1.8mtr is Concerting coil Having core wire High Tenclle spring steel wire 2.6mm Dia as per Zinc Coating on wire 150Gms m2 Min strip for Blade 0.5mm+005 mm with RBT mounted on angles with Installation 0.75 diax1.0 Rmtr=1.65 Kg.RBT wire with 03 nos. of strings Required not bolts and U nails=09 nos in each post of m.s. Angle M.S angle 2.50x50x50x6mm=2.5 mtr each 2.50Rmtrx4.50 Kg./Rmtr=11.25Kg.xRs.m.s. angle for concertina coil holder 30x30x6mm [email protected]/Rmtr=4.28Kg. 1.80 Rmr x20x5mm flat m.s. bar 1.80 Rmtrx0.80Kg/Rmtr=1.44 For installation of each angle with Coment concrete casting 1:1.5:3 in foundation with 0.30x0.30x0.30cm complete with Excavation of foundation pit, fixing post. Distance between each angle post shall be 3.00 Rmtrs. Cost would come for each RD=Rs. 1368.14/3 Rmtr To cover unforeseen risk, carrying of material from site to site Arranging water, generator and drilling to rock for embedding 02 nos. of 12mm steel bar with Araldite to welding the angle required on rock bed (Analysis attached)

Hedge shear (mahar & mukand and Passi make)

Gulab cutter (mahar & mukand and Passi make)

Khupi 6" (mahar and mukand and Passi make)

Khupi dassi

Side cutter (RGT)

Garden Spades (Kassi) heavy weight

Tasla (3 Kg)

Brush Cutter wire (50 Mtr.)

Hydraulic Machine chain 18"

R.H. Pipe 1"

Soil rake (mahar & mukand and Passi make)

Pick Axe Beech Wood Shaft Wooden Handle (TATA and Passi make)

Bamboo Stick Broom with 5' ft. Stick

Grass Cutting Sword (mahar & mukand and Passi make)

Martindale 12 Inch BILLHOOK With Wooden Handle (mahar & mukand and Passi make)

FS 400 Brushcutter with autocut & brush knife(STIHL make)

HS 45 Hedgetrimmer 18"(STIHL make)

HT 75 Pole pruner 12"(STIHL make)

Petrol Driven light weight ,handy Chain Saw of STIHL Germany make model No. MS 250 with Engine displacement of 45.4cc with rated output of 2.3kw/3.1hp, weight 4.6kg,fuel tank capacity 0.47ltr,chain oil tank capacity 0.20ltr, weight to power ratio of 2.0kg/kw, oilomatic chain of 3/8" picco micro & guide bar of 18" along with std tools & accessories.

Petrol Driven light weight ,handy Chain Saw of STIHL Germany make model No. MS 382 with Engine displacement of 72.0cc with rated output of 3.9kw/5.3hp, dry weight 6.6kg,chain oil tank capacity 0.20ltr, weight to power ratio of 1.7 kg/kw, oilomatic chain of 3/8" rapid micro & guide bar 18"/20" of along with std tools & accessories.

Petrol Driven Telescopic Tree Pruner/Pole Saw of STIHL Germany make Model No. HT75 Engine displacement of 25.4cc with rated output of 0.95kw/1.3hp, weight 6.9 kg,fuel tank capacity 0.67ltr,length without cutting tool106", extended length without cutting tool 154", anti vibration engine,elasto start along with std tools & accessories.

Chain 18'' For MS 250

Chain 25'' For MS 382

Chain 12'' For HT 75

Maintenance of ornametal trees and shrub plants on road side central verge/ green belt plants all types of plants trees, shrubs, creeper/ ground covers, seasonal plants, flower beds, rose beds etc. fine grassing lawn hedge, bougainvellia, topairy plants, rockery and any other type of plants existing at site in all respect. The maintenance job will include the work of hoeing, weeding, watering, pruning, trimming, making of thambla, cutting of grass, cutting of hedge, sweeping work and all other works contigent thereto related to horticulture in the park. Labour jon in regards to spreading of all manure and fertilizers, spray of insecticides, pesticides and fungicides etc. All type of casualties occurred to the plants and other horticulture works if anyduring the currency of contract. the contractor shall replace it at his own cost with same varities. The cont. will be responsible for any damage or theft in day time in central verge/ park/ green belt area. Cont. also held responsible for replacement of casulties of plants of same varities. Note:- (i) Sweeping of all Green belts and parks every Day and Lifting of horticulture waste every day (ii) All types of horticulture equipment(PVC pipe,Sweeping Jhadu etc.) provided by Contractor

Operation & Maintenance of 1 nos. anaerobic STP (30 KLD capacity) based on Sustainable Microbial Anaerobic Reator based Technology for MCG, Gurgaon using bacterial solution (OSI/Enivirosense/Ecolog). Sewage Treatement charges include: a. Min. dosage of 120 Litres of activated OS1/ Envirosense/ Ecolog bacteria per day in the STP b. Supply of min. 72kg of micronutrients (molasses) per month

Cable(6 Sqmm)

Cable(16 Sqmm)

Cable(25 Sqmm)

Panel Board (10 HP)

MCB (63 Amp)

GI Pipe (50 mm)

Contactor (25 Amp)

Supply and stacking of plants Hamelia patens of height 60-75 cm with 6-8 branches in poly bags of size 25 cm

Supply and stacking of plants Tabernaemontana coronaria (varigated) of height 45-60 cm with 3-4 branches earthen pots of size 20 cm

Supply and satcking of Bougainvilea (variety Butiana, Lady Mary Baring, Mahara, Mohan, Scrarlet Queen, Varigata, etc. 60-75 cm

Supply and stacking of plant Largerstroemia indica of height 90-105 cm multibranched in poly bags of size 25 cm

Providing and Displaying Acalypha red plant well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per director of the officer-in-charge

Supply and stacking of plant Calliandra emarginata of height 45-60 cm in earthen pot of size 20 cm

Supply and stacking of plant Ficus panda of height 45-60 cm with 6-7 branches and healthy foliage in p. bag of size 25 cm.

Supply and stacking of plant Galphimia gracilis 2'ht, 8''polybag, spread1' well grown

Supply and stacking of plant Hibiscus rosasinensis of height 45-60 cm bushy in big size HDPE bag.

Supply and stacking of plant Hibiscus variegated of height 45-60 cm with 3-4 branches and healthy variegated foliage in earthen posts of size 20cm

Supply and stacking of plant Lantana spp.1'ht, 8''polybag, 8"-10" spread well grown

Supply and stacking of plant Murrya exotica 2'ht, 8''polybag, spread1' well grown

Supply and satcking of plant Putranjiva roxburghi of ht. 60-75 cm in bag of size 20 cm

Supply and stacking of plant Tecoma stans of height 45-60cm branched in earthen pots of size 20 cm

Supply and stacking of plant Thuja compacta of height 45-60 cm well branched in earthen pots of size 25 cm

Supply and satcking of plants Nerium oleander of height 45-60 cm with 3-4 branches in poly bags of size 20 cm

Supply and stacking of plant Tabernaemontana coronaria (Single) of height 45-60 c, om earthen pots of size 20 cm

Supply and stacking of plants Jatropha 2'ht, 8''polybag, spread1' well grown

Supply and stacking of plants Canna dwarf 2'ht, 8''polybag, spread1' well grown

Supply and stacking of plants Tecomagaudichaudi 2'ht, 8''polybag, spread1' well grown

Supply and stacking of plants Thevetia nerifolia 2'ht, 8''polybag, spread1' well grown

Supply and stacking of plants Kaner dwarf Red 1'½'' ht, 8''polybag, spread1' well grown

Supply and stacking of plants Cassia biflora 2'ht, 8''polybag, spread1' well grown

Supply and stacking of plants Caesalpinia pulcherima 2' ht. 8" polybag

Supply and stacking of plants Rose desi multibranch 2' ht. polybag 10"x12"

Supply and stacking of plants Cassia laviegata 2' ht., 8" polybag, 1' spread

Supply and stacking of plants Gardenia jasminoides 1'.6" ht. 8"x10" polybag well grown

Supply and stacking of plants Jasminum sambac 2' ht. 8"x10" polybag well grown

Supply and stacking of plants Cestrun nocturnum 2' ht. 8"x10" polybagwell grown

Supply and stacking of plants Jasminum grandiflora 1'.6" - 2' ht. 8"x10" polybag well grown

Supply and stacking of plant Murraya Koenigii spreng of ht. 45-60 cm well developed in earthen post of size 20 cm

Providing Ipomea purpurea (Morning glory) plant of height 30 cm to 45 cm in 20 cm size of Earthen pots / Plastic pots.

Supply and stacking of plant Malpighia coccigera of height 30-45 cm multibranched in earthen pots of size 20 cm

Supply and satcking of plants Nyctanthes arbor tristis (Harsingar) of ht. 90-105 cm in Eathen post of size 20 cm

Supply and stacking of plant Bignona venusta 1'.6" - 2' ht. 8"x10" polybag

Providing Clerodendrum splendens plant of height 30 cm to 45 cm in 20 cm size of Earthen pots/ Plastic pots

Providing Passiflora caerulea plant of height 30 cm to 45 cm in 20 cm size of Earthen pots/ Plastic pots

Supply and stacking of plant Quisqualis indica 2'.6" ht. 8"x10" polybag

Supply and stacking of plant Tecoma grandiflora 2' ht. 8"x10" polybag

Supply and stacking of plantVernonia elaegnifolia 1'.6" - 2' ht. 8"x10" polybag multibranch

Providing of Aglaonema Parrot, Jungle plant (three in one), having ht. 30 cm and above with 20 to 25 leaves, well developed, fresh & healthy in 25 cm size of Earthen pot / Plastic pot.

Providing of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot.

Providing of Croton Challanger variety plant, having ht. 30cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot / Plastic pot.

Providing of Croton Body Golden Punctatumaureum plant, having ht. 23 cm to 30 cm well developed with fresh and healthy foliage in 15 cm size of Earthen pot / Plastic pot.

Providing of Draceana Song of india Green plant (three in one), having ht. 30 cm well developed fresh & healthy lush green foliage from bottom to top in 20 cm size of Earthen pot / Plastic pot.

Providing of Draceana Kedarnath plant, having ht. 30 cm & above well developed with good colourful foliage in 20 cm size of Earthen pot / Plastic pot.

Providing of Dracaena mahatma plant having ht. 30 cm to 45 cm well developed fresh and healthy foliage in 20 cm size of Earthen pot / Plastic pot.

Providing of Dracaena rosea plant having ht. 30 cm & above with 8 to 10 leaves well developed fresh and healthy in 20 cm size of Earthen pot / Plastic pot.

Providing of Livistona palm plant, having ht. 30 cm to 45 cm well developed with 5 to 6 leaves fresh & healthy foliage in 25 cm size of Earthen pot / Plastic pot.

Providing of Raphis palm plant, having ht. 45 cm to 60 cm with 5 to 7 suckers well developed full of fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot.

Providing of Schefflera high colour plant, having ht. 23 cm to 30 cm well developed with fresh & healthy foliage in 20 cm size of Earthen pot / Plastic pot.

Providing Plant Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot.

Providing Aspidistra plant having 10 to 15 leaves well developed with fresh & healthy in 25 cm size of Earthen Pt/ Plastic pot.

Providing Euphorbia milli hybrid varieth plant having ht. 30 cm to 45 cm with multi branch full bloom fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot.

Providing Syngonium (Butterfly) variegated with 2-3 suckers healthy foliage in Earthen Pot/ Platic Pot of size 20 cm.

Providing Azadirachta indica (Neem) of plants height 120-130 cm in big polybag of plants size 25 cm. girth 2"-3"

Providing Callistemon lanceolatus of plants height 150-165 cm in big poly bags of plants size 25 cm. girth 2"-3"

Providing Casuarina equisetifolia of plants height 150-165 cm in big poly bags of plants size 25 cm girth 2"-3"

Providing Cassia fistula (Amaltash) of plants height 120-135 in big poly bags of plants size 25 cm girth 2"-3"

Providing Cassia nodosa of plants height 120-150 cm in big poly bags of plants size 25 cm girth 2"-3"

Providing Chorisia speciosa of plants height 150-165 cm in big poly bags of plants size 25 cm girth 2"-3"

Providing Delonix regia (Gulmohar) plants height 150-165 cm in big poly bags of plants size 25 cm girth 2"-3"

Providing Grevillea robusta (Silver Oak) plants height 150-165 cm in big poly bags of plants size 25 cm girth 2"-3"

Providing Lagerstroemia flosreginae plants height 150-165 cm in big poly bag of plants size 25 cm girth 2"-3"

Providing Michelia champa plants height 90-105 cm in earthen pots of plants size 25 cm girth 2"-3"

Providing Phyllanthus emblica plants height 150-165 cm in big HDPE bag girth 2"-3"

Providing Eugenia jambolana plants height 150-165 cm in big poly bags of plats size 25 cm girth 2"-3"

Providing Tamarindus indica of plants height 130-150 cm in big polybags of plants size 25 cm girth 2"-3" g

Providing Agle marmelos plants height 150-165 & 2"-3" girth

Providing Morus alba plants height 150-165 cm & 2"-3" girth

Providing Inga dulsis plants height 150-165 cm & 2"-3" girth

Providing Artocarpus hetrophyllus plants height 150-165 cm & 2"-3" girth

Providing China orange plants height 130-145, 2"-3" girth

Providing Lemon plants height 130-145 cm, 2" girth

Providing Pomegranate plants height 130-145 cm, 2" girth

Providing Adenium Obesum well developed with fresh & healthy 4 to 5 branch 60 to 75 cm ht. plant in 40 cm size Earthen Pot/Plastic Pot

Providing Bamboo Buddha valley with fresh & healthy 3 to 4 suckers having 75 to 90 cm ht. plant in 25 cm size Earthen Pot/Plastic pot

Providing Bamboo Buddha Valley with fresh & healthy 5 to 6 suckers 1.80 m to 2.10m ht. umbrella type plant well developed in 50 cm Cement Pot

Providing Bismarkia Palm 115 to 180 cm ht. plant well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot

Providing Cycus circinallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot

Providing Cycus revoluta in 35 cm challi, specimen plant, having 30 to 40 with fresh and healthy leaves having 25cm to 30cm circumfrance of base stem well developed

Providing Cyprus golden well shaped developed with good colored foliage fresh & healthy 60 to 75 cm ht. in 30 cm Earthen Pot

Providing Cyprus Golden Conical Shape 150 to 165 cm ht. plant with fresh and healthy Golden colour foliage in 35 cm cement pot

Providing Ficus black vivion piller Topairy cylinder type well developed with fresh & healthy 180 to 210 cm ht in 40 cm cement pot

Providing Ficus Retusa Topairy well developed with fresh & healthy 5 to 6 big ball specific size and shape 180 to 210 cm ht. in 40 cm cement pot

Providing Ficus resnold Topairy well developed with fresh & healthy 6 to 7 big ball specific size 210 to 240 cm ht in 45 cm cement pot

Providing Foxtail palm well developed with fresh & healthy foliage of ht. plant 210 to 240 cm in big 40 cm cement pot

Providing Furcaria Variegated hybrid well developed with fresh & healthy foliage 20 and above attractive leaves in 35 cm cement pot

Providing Golden Bottle push Topairy well developed with fresh & healthy foliage 5 to 6 big ball 115 to 180 cm ht. in 40 cm cement pot

Providing Zamia palm well developed with fresh & healthy leaves 90 cm ht. in 35 cm cement pot

Providing Latania Rubra Palm well developed with fresh & healthy foliage 150 to 180 cm ht. plant with 6 to 7 leaves in big 35cm cement pot

Providing Mascarena palm well developed with fresh & healthy foliage leaves 150 to 180 cm ht in 35 cm cement pot

Providing Phoenix roebeleni palm well developed having 20 to 25 fresh & healthy leaves 90 to 105 cm ht. plant in 30 cm cement pot

Providing Topairy plant of Ficus Bush King well developed with fresh & healthy foliage from Top to Bottom with single piller 60 to 75 cm spread 210 to 225 cm ht. plant in 35 cm cement Tray/Cement pot

Providing Topairy plant of Ficus Nuda well developed with fresh & healthy foliage from Top to Bottom with single piller 75 to 90 cm spread 195 to 210 cm ht. plant in 35 cm cement tray/cement pot

Providing Topairy plant of Ficus Panda well developed with fresh & healthy foliage with 3 to 4 Ball and 60 to 75 cm spread each Ball 135 to 150 cm ht. plant in 35 cm cement tray/ cement pot

Providing Topiary plant Casuarina plant fresh & healthy having 5 to 6 specific shape and size ball well developed 195 to 210 cm ht. plant in 40 cm cement pot

Providing Travellar palm well developed with fresh & healthy foliage 120 to 150 cm ht. plant in 35 cm cement pot

Providing Washingtonia filifera palm well developed 90 to 105 cm ht. plant having 5 to 6 straight fresh and healthy leaves in 35 cm cement pot

Providing Asparagus marrie plant well developed 15 to 20 leaves full of branches and foliage in 25 cm size of Earthen pot/ Plastic pot

Providing Asparagus sprengeri plant of height 30 cm to 45 cm full of leafy branches in 20 cm size of Earthen pot/ Plastic pot.

Providing Chlorophytum Green plant full of leady suckers in 20 cm size of Earthen pot/ Plastic pot

Providing Chlorophytum variegated plant full of leady suckers in 15 cm size of Earthen pot/ Plastic pot

Providing Cuphea chinensis plant of ht. 30-45 cm full of branches and healthy foliage in 25 cm size of Earthen pot/Plastic pot

Providing Iresine herbstii plant of height 20-30 cm full of branches well developed in 20 cm size of Earthen pot/ Plastic pot

Providing Juniperus prostrata plant with 5 to 6 latral branches and green foliage in 20 cm size of Earthen pot/Plastic pot

Providing Ophiopogon plant green/black full of leaves in 20 cm size of Earthen pot/ Plastic pot

Providing Ophiopogon jaburan variegated plant full of variegated leaves in 15 cm size of Earthen pot/ Plastic pot

Providing Ophiopogon jaburan variegated plant full of variegated leaves in 20 cm Earthen pot/Plastic pot

Providing Portulacaria afra Jade plant with 5 to 6 branches in 20 cm size of Earthen pot / Plastic pot

Providing Tradiscantia plant full of leaves in Earthen pot/ Plastic pot of size 20 cm

Providing Zebrina traders cantia plant having in 20 cm size of Earthen pot/ Plastic pot

Providing Bottle palm of plants ht 150-180 cm bottom girth 20-25 cm well developed in big poly bags of plants size 25 cm

Providing Bottle palm of plants ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bags

Providing Chukrassia tabularis of plants height 150-165 cm in big poly bags of plants size 25 cm

Providing Fishtail palm of plants ht. 270-300 cm bottom girth 40-50 cm well developed in big size HDPE bags

Providing Foxtail palm of plants ht. 240-270 cm bottom girth 35-40 cm well developed in big size HDPE bags

Providing Heterophragma adenophyllum Marore fali of plants height 150-165 cm in big poly bag of plants size 25 cm

Providing Mimusops elengi Maulsri of plants height 180-195 cm well developed with thick stem in big in big size HDPE bag 2"-3"

Providing Phoenix sylvestris Roxb. Wild date palm/khajur of plants height 150-165 cm in big HDPE bag

Providing Plumeria alba of plants height 165-180 cm with 3-4 branches and thick stem in big size HDPE bags

Providing Plumeria alba dwarf of plants height 90-105 cm with 3-4 branches and thick stem in big size HDPE bags

Providing Plumeria rubra of plants height 120-150 cm with 3-4 branches and thick stem in big size HDPE bags

Providing Saraca indica Sita ashok of plants height 105-120 cm in big poly bags of plants size 25 cm

Providing Scheichera trijuga Kusum of plants height 150-165 cm in big poly bags of plants size 25 cm

Providing Tecoma argentea of plants height 120-135 cm in big poly bag of plants size 25 cm

Providing Triangular palm 6'-7' ht. 25"x25" polybag

Providing Plumeria singaporensis 2"-3" girth 25"-25" polybag

Providing Juniperus thal 3'-4' ht. 21"x21" polybag

Providing Adenium Hybrid 25"x25" polybag

Providing Mendo grass poly bag

Providing Cryniumlilly dwarf polybag

Providing Pendanus new varigeta 8"x8" polybag

Providing Baby hibiscus pink & white 8"x8" polybag

Providing Eranthieum new gold broad leaf 8"x8" polybag

Providing Arcellia nuda dwarf 18"x18" polybag

Providing Ficus starlight 7'-8' ht. 25"x25" polybag

Providing Ficus kingbush 3' ht. 18"x18" polybag

Providing Ficus microcarpa 4' ht. 10"x10" polybag

Providing Callistomen pollandi 2'-3' ht. 13"x13" polybag

Providing Table palm 2'-2½' ht. 13"x13" polybag

Providing Cupress gold 6' ht. 14"x14" polybag

Providing Ficus prestage 2'-2½' ht. 15"x16" polybag

Bidder Name

Amount

Himachal Consultancy Organization Limited

J AND K INDUSTRIAL AND TECHNICAL COnsultancy organisation ltd

J AND K INDUSTRIAL AND TECHNICAL COnsultancy organisation ltd

J AND K INDUSTRIAL AND TECHNICAL COnsultancy organisation ltd