Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹97.6 LAccepted-AOC OFFICE NO 25 3RD FLOOR ONLOOKER BUILDING SIR P M ROAD FORT MUMBAI 400 001 | MUMBAI | MUMBAI | MAHARASHTRA | 400001 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹1.2 Cr+₹16.6 L (16.8%)Rejected-Finance FLAT NO 002 MAHAVIR VILLA CHS LTD PLOT NO 259 SECTOR 21 NERUL EAST NAVI MUMBAI 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹1.2 Cr+₹21.0 L (21.2%)Rejected-Finance T 16 1 SHETTY HOTEL OLD NAVY NAGAR COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L3 | Rejected-Finance Other than being lowest |
Tender Value
₹1.2 Cr
EMD Value
₹2.0 L
Closing Date
11 Mar 2024, 6:50 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
SPECIAL REPAIR TO INTEGRATED REPAIR COMPLEX (IRC) BLDG NO 199 C NO 101 AT NAVAL DOCKYARD MUMBAI AND ADDITION ALTERATION OF UPPER AND LOWER DUTY ROOM OF MOC MUMBAI AT INS ANGRE UNDER GE (NW) KUNJALI, COLABA, MUMBAI
2024_MES_641039_1
8598/CWE (NW) Mumbai/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Kunjali
Class B
category a (i)
7 documents required · 7 mandatory
₹1,000
GE (NW) Kunjali
₹2.0 L
Yes
30 May 2024
6 Feb 2024
13 Mar 2024
6 Feb 2024
11 Mar 2024
27 Feb 2024
6 Feb 2024 - 26 Feb 2024
Amount
Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and directed by Engr-in-Charge. Note: The place of disposal shall be find out by the contractor.
Material & labour for rendering 20mm thick in two coats(15mm inner coat + 5mm finishing coat) on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound @ 3% by weight of cement and finished fair and even including necessary scaffolding and safety arrangement for high rise bldgscomplete all as specified and directed by Engr-in-Charge. Note- Water proofing compoundshall be measured and paid for separately.
Material & labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even and smooth with and including 1 mm thick neeru complete all as specified and directed by Engr-in-Charge.
Material & labour for rendering 5 mm thick on fair faces of concrete surfaces in ceiling in CM (1:3) and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
Supply only integral water proofing compound.complete all as specified and as directed by Engr-in-Charge
Material & labour for chipping, removing carefully concrete work by low impact hammer breakar without damaging the structure ( hard concrete should not be removed by force) including cleaning, necessary scafolding and safety measures in high rise bldgs and disposal of debries out side MD land complete all as specified and as directed Engr-in-charge. Note: The place of disposal shall be find out by the contractor.
Material & labour for dismantling of rusted reinforcement bars steel, cleaning with wire/rotary wire brush, making the surfaces free from loose material dirt,loose rust spalls and applying two coats of alkaline rust converting primer FEOVERT conforming to ASTM-B-117, on the rebars with time interval of 6 hour between the coats and applying protective coating IPNET-RB complete all as per manufacturers instructions and as directed by Engr-in-charge..
Material & labour for TMT bars of appropriate size where 20% of cross section is reduced including application of rust converter FEOVERT and applying protective coating IPNET-RB including cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia to new reinforcement or welding of steel reinforcement where required complete all as per manufacturers instructions and as directed by Engr-in-charge.
Material & labour for carry out application of Bi-polar migratory corrosion inhibitor EPCO-KP-100/Protectsil CIT/Ferogard 903 on concrete surface (This inhibitor shall have migratory kind of property which permits the material to migrate to a vertual extent of 100 mm through porus of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It should have property to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5) so it has not carcinogen activity with concrete complete all as per manufacturers instructions and as directed by Engr-in-charge.
Material & labour for providing and applying structural grade EPIBOND-21-LP prior to application rendering/ plaster confirming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete complete all as per manufacturers instructions and as directed by Engr-in-charge.
Material & labour for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 = 1 monobond -5Cemen t-15 sand) -in damaged areas in 30mm thickness including leveling profliling including necessary scaffolding and safety measures for high rise buildings complete all as per manufacturers instructions and as directed by Engr-in-charge.
Material & labour for Providing and applying jacketing around columns/RCC members with Micro concrete (Molith-MC) M:40 including all lifts, shuttering, drilling holes and fixing shear anchor complete all as per manufacturers instructions and as directed by Engr-in-charge.
Material & labour for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes in structural members at the intervals of 500 mm center to center in staggered manner or as directed by Engr-in-charge and work shall be carried out as under :- (i) Cleaning of holes by air blower prior to fixing nozzles. (ii) Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun.Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cut the nozzles by chisel after completion of grouting without damaging structural elements.
Material & Labour for Injecting cement slurry grout, in the ratio 1:2 (1- Cement, 2-water) including super plsticizer (Supercom-100) 250 ml/50 Kgs. Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 0.5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled. (for repair to wall & slab) complete all as specified and as directed by Engr-in-Charge.
Material & Labour for Injecting low viscosity MONOPOL (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, Including,Mixing of materials:Mixing of material components(part a&b) in the required quantities as per manufacturer's instruction by weigh batching.Grouting maintain the pressureat exit(0.5 to 1.0 kg/cm2) by monitoring pressure guage at exit.Grout the material through prefixed nozzles in the structural elements@ 100ml per nozzle. Repeat the process for all the nozzles. (Beam and columns) complete all as specified and as directed by Engr-in-Charge
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc all as directed.
Material & Labour for false ceiling using 600mm x 600mm x 6mm thick non asbestos fiber cement designer ceiliing tiles (Density>1200Kg/Cum) fixed in grid made out of powder coated GI sheet main tee of size 23.50mm x 40mm x 0.63mm and cross tee of size 23.50mm x 23.50mm x 0.63mm and angle size 19mmm x 19mm x 0.63mm including 4mm dia GI wire as suspender with bolts, nut, clits, pin hook, washers etc. for securing frame work to ceiling to the snap grid including making necessary holes / cuttings for providing light/fan recesses / projected pattern as required complete all as specified and as directed by Engr-in-Charge.
Material & labour for POP false ceiling using 600mm x 900mm x 12mm thick plaster of paris with gypsum binder sheet decorative type including two coats of plastic emulsion paint and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50mm x 25mm spaced at 750 mm centre, secondary joist of size 75mm x 20mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 mtr C/C complete all as specified and directed by Engr-in-Charge.
Supply and fixing 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall vertically with screws at a distance of 30 cm c/c to make PVC frame complete all as specified and shown in SSR Part II complete all as specified and directed by Engr-in-Charge. .
Supply & Fixing 5mm thick & 35mm width PVC sheets with ‘U’ shape grooved of 2mm depth in the center for wall panelling / ceiling inclusive of fixing on to wall vertically with screws at a distance of 30 cm c/c complete all as specified and shown in SSR Part II complete all as specified and directed by Engr-in-Charge.
Taking down chowkat with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge.
Taking down chowkat with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed by Engr-in-Charge.
Supply and fixing powder coated aluminium sections (minimum thickness of powder coating 50 micron) for partitions, windows, ventilators and doors including fabrication of frame/shutters and fixing to walls/floors with necessary lugs, jointing cleats etc including all accessories such as necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading, rollers, SS screws etc including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required complete all as specified and directed by Engr-in-Charge. Note: - (i) Glass panes will be measured & paid separately. (ii) Rubber beading will not be weighed and paid separately
Supply & Fixing in repair aluminium grill of design No DG-104,7.5 mm thick of with and including suitable size aluminium anodised F/H section frame as per manufacturers instructions complete all as specified and directed by Engr-in-Charge.
Material & labour for second class hardwood (SAL) plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge.
Material & labour for 30 mm thick second class hard wood (Sal) glazed and skeleton shutters open rebated and prepared to receive glass, gauze, (without sash bars) edges of framing plain chamfered or rounded fitted to cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I Section 8 Clause 8.20 (b) complete all as specified and directed by Engr-in-Charge.
Supply & Fixing 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.complete all as specified and as directed by Engr-in-Charge.
Supply & Fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification and drawings shown in SSR Part II.complete all as specified and as directed by Engr-in-Charge.
Supply & Fixing factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed by Engr-in-Charge.
Supply & Fixing in repairs 18/19 mm thcik prelaminated partical board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to frame work as in cupboard etc including providing 6 mm thick 1st class hard wood (Teak) cover fillets to all exposed faces of the board including two coats of French polish to fillets complete all as specified and directed by Engr-in-Charge.
Supply & Fixing 12mm thick prelaminated medium density fibre board,interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed by Engr-in-Charge.
Supply & Fixing aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
Supply & Fixing aluminium anodized barrel tower bolts 150 mm size of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
Supply & Fixing 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed by Engr-in-Charge.
Supply & Fixing 100 mm size SS butt hinges medium weight with SS hinge pin and fixed complete all as specified and directed by Engr-in-Charge.
Supply & Fixing 150mm size brass handle cast type polished bright complete all as specified and directed by Engr-in-Charge.
Supply & Fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc.complete all as specified and as directed by Engr-in-Charge.
Supply & Fixing 125 mm long aluminium floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring. complete all as specified and as directed by Engr-in-Charge.
Supply & Fixing 3.30 mm thick Linoleum flooring laminated plain cloured, ,laid with approved seales based adhesive in floors complete all as specified and as directed by Engr-in-Charge
Supply & Fixing in repair 12mm thick, toughened glass in door shutters, partitions etc with and including necessary fittings and fixtures such as SS handles SS studs, SS fittings,SS pivots etc complete all as specified and as directed by Engr-in-Charge
Supply & Fixing 12mm thick plywood ,grade BWP type BB, fixed with screws to timber frame work as in panelling/partition etc complete all as specified and directed by Engr-in-Charge.
Material & Labour for 0.9mm thick decorative texture finish laminate type 1 , of surface finish colour and pattern as approved fixed with adhesive as per makers instructions complete all as specified and directed by Engr-in-Charge.
Supply & Fixing 1st class hard wood (teak) moulding as in cornices , joints of wall panelling board etc sectional area not exc 6 sqcm including applying two coats of french polishing complete all as specified and as directed by Engr-in-Charge.
Supply & Fixing 2nd class HW plain fillets clean sawn square, rectangular or triangular in section, sectional area exc 13 Sqcm but n.exc 25 Sqcm fixed with nails complete all as specified and as directed by Engr-in-Charge
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land complete all as specified and directed by Engr-in-Charge. Note: The place of disposal shall be find out by the contractor.
Material & Labour for 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps/stairs, jambs, pillars, window- cills,cooking platforms, working table and like laid over and including 15 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge .
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of debris out of MD land complete all as specified and directed by Engr-in-Charge. Note: The place of disposal shall be find out by the contractor.
Material & Labour for taking down tarfelt / APP memberane and roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc and brushing neat cement slurry with 3.0kg of cement per sq. metre and applying 15 mm thick rendering in cement mortar (1:4) mixed with water proofing compound as per manufacturers instructions and finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. Note- i) WPC shall be measured and paid separately. ii) Quoted rate shall be inclusive of taking down and re fixing of existing lightning arrestors system, provision of new PCC block at damaged PCC block,disconnecting water tank,water connection pipe and refixing the same after completion as per existing as directed by Engr-in-Charge.
Material & Labour for PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as a levelling course on roof surfaces complete all as specified and as directed by Engr-in-Charge
Material & labour for preparing roof surfaces and applying water proofing treatment as per manufacturers instructions and comprises of the following activities:- (a) Apply one coat of bituminous primer @ 0.25 Kg per Sqm. (b) Apply evenly a coat of bitumen 85/25 at the rate of 1.2 kg per sqm (c) Providing and laying five layered 4 mm thick APP (Atatic poly propylele) modified polyester reinforced water proofing membrane with minimum weight of 4.60 Kg/Sqm. The APP membrane shall be laid using torch application method with minimum 100 mm side overlap and 150 mm end overlap.The APP membrane shall be taken upto minimum 200 mm on vertial surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet. (d) Apply solar reflective bituminous aluminium paint @ 100 gm/Sqm (e) Ponding test including supply of water for 72 hours after completion of water proofing work. Note - (i) Irrespective of lap the net covered area shall only be measured and paid. ii) The laying of membrane shall be got done through an authorised applicator of manufacturer of the membrane.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debris outside MD land complete all as specified and directed by Engr-in-Charge. Note: The place of disposal shall be find out by the contractor.
Material & Labour for 10mm thick light shade virified ceramic tiles of approved colour (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, laid in floors over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.
Material & Labour for 10mm thick light shade vitrified ceramic tiles of approved colour (square/rectangular) polished, area of each tiles not exceeding 0.36sqm laid on vertical surfaces such as skirting/dado over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.
Material & Labour for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor laid over and including 20mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.
Material & Labour for coloured glazed ceramic tiles 450mm x 300mm x 7mm thick but laid on vertical surfaces such as skirting/dado over and including 10mm thick backing coat in CM (1:3), set and jointed in neat cement paste and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.
Taking down PVC waste and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed by Engr-in-Charge.
Supply & Fixing 160mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with suitable size GI clamps complete all as specified and directed by Engr-in-Charge.
Supply & Fixing 160mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.
Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of of primer all as specified and directed by Engr-in-Charge.
Material & labour for preparing new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.
Material & labour for complete removal of existing treatment including washing, rubbing down and stopping of distempered and painted wall surfaces, filling holes and cracks with filling putty on wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge.
Material & labour for filling holes and cracks with filling putty on wall and applying one coat of wall care putty not less than 2mm thickness and making the surface even and smooth using emery paper complete all as specified and directed by Engineer-in- Charge. .
Material & Labour for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed by Engr-in-Charge.
Material & Labour for preparation of new plastered surfaces of wall, soffits, roof facia and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of self primer including necesssary scaffolding and safety arrangement for high rise buildings complete all as specified and as directed by Engr-in-Charge
Material & Labour preparation of old decorated surfaces of walls, soffits, roof facia and applying one coat of weather proof acrylic based paint (100% acrylic) including necesssary scaffolding and safety arrangement for high rise buildings complete all as specified and as directed by Engr-in-Charge
Supply & Fixing in repairs door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg completeall as specified and directed by Engr-in-Charge.
Supply & Fixing 4mm thick bakelite sheet with decorative choice laminated on both side complete all as specified and as directed by Engr-in-Charge.
Supply & Fixing roller/venetian blinds vertical/horizontal type made out of standard cloth of approved texture with necessary accessories etc complete all as specified and as directed by Engr-in-Charge
Supply & Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed by Engr-in-Charge
Dismantling cast iron or reinforced concrete drain pipes upto 100 mm bore jointed in cement mortar fixed to wall of high rise buildings complete all as specified and as directed by Engr-in-Charge
Supply & Fixing 100 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls with suitable size GI clamps complete all as specified and as directed by Engr-in-Charge
Supply & Fixing 75 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls with suitable size GI clamps complete all as specified and as directed by Engr-in-Charge
Supply & Fixing in repairs CI Bends100 mm bore (any radius), diminishing pieces or tapers ( larger bore measured) complete all as specified and as directed by Engr-in-Charge
Supply & Fixing in repairs CI Bends 75 mm bore ( any radius), diminishing pieces or tapers ( larger bore measured) complete all as specified and as directed by Engr-in-Charge
Supply & Fixing in repairs 100mm bore Cast iron nahani trap with grating including jointing to waste pipe in run lead complete all as specified and as directed by Engr-in-Charge
Taking up or down existing 15mm bore GI water tubing complete with all fittings complete all as specified and as directed by Engr-in-Charge
Taking up or down existing 20mm bore GI water tubing complete with all fittings complete all as specified and as directed by Engr-in-Charge
Supply and fixing 15 mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings or laid in floors with suitable size GI clamps complete all as specified.
Supply and fixing 20mm bore GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings or laid in floors with suitable size GI clamps complete all as specified.
Supply & Fixing in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white (excluding flushing cistern and flush pipe) with P or S trap complete all as specified and as directed by Engr-in-Charge
Supply & Fixing in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium anodised hinging device complete all as specified and as directed by Engr-in-Charge
Supply & Fixing in repairs 15 mm bore Pillar taps CP fancy type with wall flange and lift type operating knob and base flange complete all as specified and directed by Engr-in-Charge .
Supply & Fixing in repairs 15 mm bore bib cock CP fancy type with wall flange complete all as specified and as directed by Engr-in-Charge .
Supply & Fixing in repairs 15 mm bore angular stop cock CP fancy type with wall flange complete all as specified and directed by Engr-in-Charge.
Supply & fixing in repair wash hand basin vitreous china white (flat back) of size 550mm x 400mm including CI bracket including 15mm bore PVC connections, 32mm dia CP waste coupling and 32mm dia PVC waste pipe 90cm long and making all connections complete all as specified and as directed by Engr-in-Charge
Supply & fixing PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed by Engr-in-Charge
Supply & fixing Overhead Shower ø140mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System complete all as specified and as directed
Supply & fixing in repairs 10 Ltr capacity PVC valveless syphonic action type ,flushing cistern Low level white, with inlet,ball valve ,float and handle including CI brackets complete all as specified and as directed by Engr-in-Charge
Supply & Fixing in repairs 32 mm dia flush pipe of Polyethylene of low or high density or PVC for low level cistern complete all as specified and as directed by Engr-in-Charge
Supply & Fixing in repairs stainless steel Soap dish of any type fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engr-in-Charge
Supply & Fixing in repairs Toilet paper Holder Recessed Type (Stainless Steel) complete all as specified and as directed
Material & labour for French polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified and as directed by Engr-in-Charge
Supply & Fixing in repairs health faucet ABS Body with 8 mm dia 1 mtr Spirochrome flex flexible tube and wall hook complete all as specified and as directed by Engr-in-Charge
Supply & Fixing in repairs Corner glass shelf with brackets and railing of size 255mm complete all as specified and as directed by Engr-in-Charge
Supply & Fixing in repairs stainless steel CP towel rail 600 mm long with round flange complete all as specified and as directed by Engr-in-Charge
Supply & Fixing in repairs stainless steel towel ring square with round flange of size 210mm x 210mm complete all as specified and as directed by Engr-in-Charge
Material & Labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge
Material & Labour for preparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint on external window with necessary scaffolding for high rise bldgs complete all as specified and directed by Engr-in-Charge
Supply & Fixing Under Counter vitreous china wash Basin with Fixing Accessories, Size:605x430x200 mm including 32 mm dia brass CP waste coupling , 32mm dia PVC waste pipe 90cm long and making all connections complete all as specified and as directed by Engr-in-Charge
Supply & Fixing Single Piece vitreous china WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size: 370x695x795 mm, S trap-300mm including connecting piece complete all as specified and directed by Engr-in-Charge .
Material & labour for Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified and as directed by Engr-in-Charge
Supply & Fixing 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified.
Supply & Fixing in repairs15mm bore Brass CP mixer for mixing hot & cold water screwed dow for iron pipe, fixed as complete all as specified and as directed by Engr-in-Charge.
Supply & Fixing in repairs 15 mm bore two way CP bib cock fancy type with wall flange complete all as specified and as directed by Engr-in-Charge .
Demolition of cement concrete in coving above chajja, canopy etc including removing loose particles and cleaning loose particles with wire brush and cleaning with water including scaffolding upto any height complete all as specified and directed by Engr-in-Charge.
Material & labour for providing and fixing additional TMT main bars in stirrups of designed diameter in various structure element like column beam and foundation includind drilling, bending and fixing the bars with epoxy putty etc, complete all as specified. Note - Steel shall be provided on the basis of 1% of volume of concrete.
Material & Labour for PCC 1:1.5:3 type A-0 (using 12.5 mm graded stone aggregate) as in covering above chajja, canopy finishing top surface even and smooth without using extra cement including scafolding upto any height complete all as specified and directed by Engr-in-Charge.
Material & Labour for rendering 20 mm thick using pre polymer modified ready mix cement based plaster on external wall surfaces in two coats 12 mm thick base coat and 8 mm thick finishing/final coat having minimum composition of cement & sand (1:4) mixed with integral water proofing compound in the proportion as per manufacturer's instructions using fully treated dry, well graded natural river sand conforming to IS-383 having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer including making grooves of existing size including necessary two legged MS pipe scaffolding including curing complete all as specified and directed by Engr-in-Charge. Note - Water proofing compound will be measured and paid for separately.
Material & Labour for rendering 10 mm thick using pre polymer modified ready mix cement based plaster on chajja, canopy top, soffits of roof projections, chajja etc having minimum composition of cement & sand (1:4) mixed with integral water proofing compound in the proportion as per manufacturer's instructions using fully treated dry, well graded natural river sand conforming to IS-383 having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer including making grooves of existing size including necessary two legged MS pipe scaffolding including curing complete all as specified and directed by Engr-in-Charge. Note - Water proofing compound will be measured and paid for separately.
Material & Labour for rendering 15 mm thick on brick masonry surfaces in CM (1:6) mixed with integral water proofing compound in the proportion as per manufacturer's instructions and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note : WPC will be measured and paid seperated.
Material & Labour for preparation of old decorated surafces of walls and applying two coat of white wash complete all as specified by Engr-in-Charge
Material & Labour for preparation of old decorated surafces of ceiling and applying two coat of white wash complete all as specified
Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.
Material & Labour for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6m mean radius in cement mortar 1:4 complete all as specified.
Supply & Fixing in repairs 15 mm bore stop valves cast copper alloy, chromium plated ,fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-Charge.
Supply & Fixing in repairs vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding complete all as specified and directed by Engr-in-Charge.
Supply & fixing PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engr-in-Charge
Supply & Fixing in repairs 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.
Supply & Fixing 15 mm bore pillar taps cast copper alloy chromium plated fancy type with capstan heads screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified.
Supply & Fixing in repairs vitreous china urinals, bowl type (back or corner wall type,) complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisterns with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed by Engr-in-Charge.
Supply & Fixing in repairs 32mm dia PVC waste pipe for WHB and urinals complete all as specified and directed by Engr-in-Charge.
Supply & Fixing 15mm bore Push type taps for urinals, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.
Supply & Fixing in repairs sinks with drainage bard made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwar wall or including fxing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engr-in-Charge
Demolition of cement concrete in sunken floor and removal of debris out of MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.
Material & Labour for filling PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in sunken floors complete all as specified and directed by Engr-in-Charge.
Material & labour for water proofing plaster for sunken portion in CM 1:3, 15 mm thick mixed with integral water proofing compound at the rate of 3 % by weight of cement and finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note- WPC will be measured and paid seperatly
Material & labour for preparing sunken floor/wall surfaces removing all dist and applying water proofing treatment consisting of two coats of elastomeric coating of BRUSHBOND RSX with minimum 2mm thickness layer complete all as per manufacture's instructions and as directed.
Material & Labour for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/ J hooks including scaffolding upto any hieght complete all as specified and directed by Engr-in-Charge.
Material & Labour for mild steel framed work such as grills, gratings, chequered/plain plate, beam, rolled section ,framed,truss purline,rafter sun shed etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars, barred iron doors, ladders, farmed balastures, walk ways, railings, frame work of water tanks ,wind tie,and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge.
Supply & Fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engr-in-Charge.
Supply & Fixing PVC (SWR) bends any radius 110mm bore complete all as specified and as directed
Supply & Fixing 3 mm thick Aluminium composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required and jointing with silicon gel of approved colour as per manufacturers instructions.
Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures and making good to disturbed surfaces matching with existing surface all as per directed by engineer in charge.
Taking down old U/S tube light fittings single / Twin ,Recess mount fitting, etc and making good the distrubed surface matching with existing surface all as per directed by engineer in charge.
Taking down old u/s MCB DBs complete with MCBs, isolator etc of any type and capacity from wall/ceiling etc & making good to the disturb surfaces matching with existing surface all as per directed by engineer in charge.
Material & labour for point wiring with 1.5 sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable 1100 volts grade drawn through and including 25mm wide PVC casing caping (ISI marked) with all accessories and terminated in and including concealed PVC modular box with modular cover plate and frame of sutable size including 1.5 sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth dolly for the following :- Note: Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green
One light point controlled by one switch
One Fan/bell point controlled by one 5A switch
One 5 Amps switch socket combination on independent board
One 5 Amps flush type switch socket point on same board board
Material & labour for point wiring with 2.5 Sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable 1100 volts grade drawn through and including suitable size surface PVC casing caping (ISI marked) with all accessories and terminated in and including surface PVC modular box with modular cover plate and frame of sutable size including 2,5 Sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth dolly for One 5pin, 15 Amps switch socket combination on indipendent board. Note: Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green
Material & Labour for point wiring (Work station for computer) with 4 Sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable 1100 volts grade drawn through and including suitable size surface PVC casing caping (ISI marked) with all accessories and terminated in and including surface PVC modular box with modular cover plate and frame of sutable size including 4 Sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth dolly for complete necessary electric connection for each work station point comprising of 03 Nos 5A sockets with 1.5 sqmm and 01 No 15A socket with 4.0 sqmm on same board complete all as specified and directed by Engr-in-Charge. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green
Material & Labour for submain wiring with 2 runs of 4 sqmm for phase and 1 run of 4 sqmm for earth FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed by Engr-in-Charge. NOTE:- (i) Two run of 4 sqmm, one run of 4 sqmm earth continuity conductor and 25 mm PVC casing caping and accessories shall be measured and paid as one length. (II) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green
Material & Labour for submain wiring with 4 runs of 4 sqmm and 1 run of 4 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed by Engr-in-Charge. NOTE:- (i) Four run of 4 sqmm, one run of 4 sqmm earth continuity conductor and 25 mm PVC casing caping and accessories shall be measured and paid as one length. (II) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green
Supply & Fixing LED batten fitting 2 x 21W, with heat shrinkable T8 batten fittings 2 nos. 21W cool white each all as specified and directed by Engr-in-Charge. Make- C & S /Crompton/ Bajaj / Philips
Supply and fixing switch piano, modular type 1 way 6 Amps 1 module 240 volts flush type complete all as specified .
Supply and fixing switch piano, modular type 1 way 16 Amps 1 module 240 volts flush type complete all as specified .
Supply and fixing modular socket 6 Amps 2/3 pin 240 volts AC combined 2 module complete all as specified .
Supply and fixing modular socket 16 Amps 2/3 pin 240 volts AC combined 2 module complete all as specified .
Supply and fixing fan regulator modular type 1 way 120W 2 module 240 volts flush type complete all as specified .
Supply and fixing ceiling rose surface bakelite three terminal of size 60x50 mm,240 Volts AC complete all as specified .
Supply & Fixing in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting VTPN 4 way, 440 volts with 100A Copper Busbar rating 440 Amps, for each phase, 2 Neutral bar, 2 Earth bar, dust and vermin proof with provision for DPX³ 160 MCCB as incomer DP MCB/Isolator/RCCB/RCBO as sub incomers and SP MCB's as outgoing etc. complete all as specied.
Supply & Fixing in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed.
Supply & Fixing in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified.
Supply & Fixing ceiling fan 1200 mm sweep 230 volt 50 HZ AC, having air delivery not less than 200cum/min, 350 rpm single phase including down rod as per site requirement and all conncted accessories including taking down and submitting to MES store yard .
Supply and fixing MCCB 4pole 125Amps, 415 Volts with breaking capacity 16 kA
Supply and fixing in repairs MCB SP 240 Volts, 50Hz, 10 kA, conforming to IS 8828 of rating 6 to 32 Amps 'C' series complete all as specified.
Supply and fixing in repairs MCB SP 240 Volts, 50Hz, 10 kA, conforming to IS 8828 of rating 40 to 63 Amps 'C' series complete all as specified.
Supply and fixing in repairs MCB SPN 240 Volts, 50Hz, 10 kA, conforming to IS 8828 of rating 40 to 63 Amps 'C' series complete all as specified.
Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( avera Schneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof complete all as specified . Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.
Material & Labour for 4mm dia GI earth continuity conductor or main earthing lead fixed to wall or buried in ground and fixed to panel/transformer through and including 20mm bore GI pipe light grade for protection complete all as specified.
Supply and fixing sheet metal enclosure with 2 pin and earth plug and socket complete with single pole MCB of 20 Amps 'C' series complete all as specified & directed.
Supply and fixing sheet metal enclosure with 3 pin and earth plug and socket complete with triple pole MCB of 63 Amps 'C' series complete all as specified & directed.
Supply & Fixing wall mounted fan 400 mm sweep 240 volt 50 HZ AC, as per site requirement and all connected accessories and civil work.incl taking down and submitting to MES store.
Supply, laying, jointing, connecting & testing 3½ core 25 sqmm XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in duct / along pole/wall etc and making connections including taking out old cable complete all as specified. Note - The cost of Aluminium thimbles/lugs and cable gland etc shall be included in quoted rate and no extra payment will be made for it.
Supply, laying, jointing, connecting & testing 3½ core 35 sqmm XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in duct / along pole/wall etc and making connections including taking out old cable complete all as specified. Note - The cost of Aluminium thimbles/lugs and cable gland etc shall be included in quoted rate and no extra payment will be made for it.
Supply and fix LED Garden light 9 Watt, cylindrical shaped integral decorative LED bollard with Opal acrylic diffuser and IP 65 With all acessories including PCC foundation tapper plug bolts,nuts,screwed etc including suitable size FRP looping box complete all as specified and directed by Engr-in-Charge
Supply, laying, jointing, connecting & testing 3½ core 10 sqmm XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor laid in duct / along pole/wall etc and making connections including taking out old cable complete all as specified. Note - The cost of Aluminium thimbles/lugs and cable gland etc shall be included in quoted rate and no extra payment will be made for it.
Supply and fixing in repairs LED flood light 100 Watt, PDC aluminium housing with aim & adjustable bracket, Modular linear flood light, SMD LED with secondary lens with IP66 Protection with all acessories and fixing arrangement complete all as specified and directed.
Supply & Fixing in repair GI hot dip, powder coated perforated GI cable tray made out of 1.6mm thick GI sheet including cutting, bending, shaping, drilling, welding etc. , 50 mm height of tray and width not less than 450mm to be fixed on brick/ stone wall vertically/horizontally ,including tray cover of thickness not less than 2.00mm including all accessories and fixing arrangement nuts, bolts, coupler plates etc complete all as specified and directed by Engr-in-Charge .
Supply and fix 150 watt highbay light corvus series powder coated PDC Aluminium LED Highbay,smd led aray with integrated lens poly carbonate cover including all accessories and fixing arrangement complete all as specified and directed by Engr-in-Charge .
Material & labour for concealed point wiring with 1.5 sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable 1100 volts grade drawn through and including suitable size concealed heavy grade PVC conduit (ISI marked) with all accessories and terminated in and including concealed PVC modular box with modular cover plate and frame of sutable size including 1.5 sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth dolly for the following :- Note: Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green
One light point point controlled by one 5A switch
One Fan point/Exhaust fan point controlled by one 5A switch
One 5A flush type switch socket point on same board board
One 5A flush type switch socket point on independent board
Material & labour for concealed point wiring with 2.5 Sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable 1100 volts grade drawn through and including suitable size concealed heavy grade PVC conduit (ISI marked) with all accessories and terminated in and including surface PVC modular box with modular cover plate and frame of sutable size including 2,5 Sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth dolly for mounting 1 x15 Amp Modular switch socket point on independent board complete all as specified. Note: Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green
Material & labour for concealed point wiring with 4 Sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable 1100 volts grade drawn through and including suitable size concealed heavy grade PVC conduit (ISI marked) with all accessories and terminated in and including surface PVC modular box with modular cover plate and frame of sutable size including 4 Sqmm size PVC insulated, unsheathed, multistranded FRLS copper conductor cable for continuous earth conductor and connecting to earth dolly for mounting 02 Nos 6A sockets and 01 No 15A socket on same board in each workstation complete all as specified and directed by Engr-in-Charge. Note: Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green
Supply & Fixing in repairs hanger clamp assembly with down rod up to 3 feet for hanging of ceiling fan with nuts,bolts,washers & split pin complete all as specified & directed by Engr-in-Charge.
Supply and fixing in repair new generation square recessed LED Luminaire 20 watt, PDC aluminium housing downlights, high quality ecomonic energy saving light including all accessories and fixing arrangement complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair new generation ultraslim LED panel recessed LED 2X2 Luminaire 36 watt, CRCA powder coated body and high translucent diffuser provides high quality ecomonic energy saving lighting Suitable for 600 x 600 mm modular/POP/Gypsum ceiling including all accessories and fixing arrangement complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair new generation walll/surface mounted 1x 20W LED batten fitting, 4 feet surface mounted provides high quality ecomonic energy saving lighting complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed by Engr-in-Charge.
Supply & Fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete suitable for one single pole MCB 20 Amps C series complete all as specified and directed by Engr-in-Charge.
Material & Labour for concealed submain wiring with 2 runs of 6 sqmm for phase and 1 run of 6 sqmm for earth FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including concealed PVC conduit heavy grade not less than 25mm dia ISI marked with all accessories like tees, elbows, junction boxs, reducer etc complete including connecting up all as specified and directed by Engr-in-Charge. NOTE:- (i) Two run of 6 sqmm, one run of 6 sqmm earth continuity conductor and 25 mm dia PVC conduit and accessories shall be measured and paid as one length. (II) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green
Material & Labour for concealed submain wiring with 4 runs of 10 sqmm for phase and 1 run of 10 sqmm for earth FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including concealed PVC conduit heavy grade not less than 25mm dia ISI marked with all accessories like tees, elbows, junction boxs, reducer etc complete including connecting up all as specified and directed by Engr-in-Charge. NOTE:- (i) Four run of 10 sqmm, one run of 10 sqmm earth continuity conductor and 25 mm dia PVC conduit and accessories shall be measured and paid as one length. (II) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green
Supply & Fixing in repair sheet metal enclosure TPN DB VTPN 6 Way,415V with 250A copper busbar, double door type IP-54, IK-09 protection suitable for housing MCCB 100Amp 4 pole incl required numbers of suitable size of gland complete etc all as specified and directed by Engr-in-Charge by Engr-in-Charge. Note- DBs shall be conceeled in wall including making good the disturbed surface to match with surrounding.
Supply & Fixing in repair MCB DB double door SPN 10 Way with 200 Amps rated copper bus bar, IP 54, IK 09 suitable for flush mounting and surface mounting complete all as specified and directed by Engr-in-Charge.
Supply & Fixing in repair MCB DB double door SPN 12 Way with 200 Amps rated copper bus bar, IP 54, IK 09 suitable for flush mounting and surface mounting complete all as specified and directed by Engr-in-Charge.
Supply & Fixing MCB SPN 63 Amps,10KA , 'C' curve complete all as specified and directed by Engr-in-Charge.
Supply & Fixing MCB SPN 40 Amps,10KA , 'C' curve complete all as specified and directed by Engr-in-Charge.
Supply & Fixing MCB SP 40 Amps,10KA, 'C' curve complete all as specified and directed by Engr-in-Charge.
Supply & Fixing TP 63 Amps,10KA , 'C' curve complete all as specified and directed by Engr-in-Charge.
Supply of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 32 mm dia with 250 micron ( average ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF ECO SAFE compound shall be supplied in 50 Pound Bag. ( 1 Bag required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set including Supply of Eco Friendly weather proof High Density Polyethylene Earth Pit Chamber Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.
Material & Labour for 25x4mm GI earth continuity conductor or main earthing lead fixed to wall or buried in ground or drawn in conduit/ pipe or fixed to transformer/panel body complete all as specified
Supply & Fixing in repair GI hot dip, powder coated perforated GI cable tray made out of 2mm thick GI sheet including cutting, bending, shaping, drilling, welding etc. , 50 mm height of tray and width not less than 250mm to be fixed on brick/ stone wall vertically/horizontally ,including tray cover of thickness not less than 2.00mm including all accessories and fixing arrangement nuts, bolts, coupler plates etc complete all as specified and directed by Engr-in-Charge .
Supply and fix bed light 3 watts Aluminium bedside, warm white with all accessories complete all as specified and directed by Engr-in-Charge
Supply and fix Aluminium ducting of existing size and thickness to fix to older part to repair the AC duct inside false ceiling including fixing accessories complete as directed by Enge-in-Charge
RAJENDRA CONSTRUCTION
Shetty Construction Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .