Provision of deficient single officers accn at Port Blair.

Amount

GENERAL SUMMARY NOTE: Schedule ‘A’ Part - I to X are prepriced by MES under Ser No. 2.00 to 11.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the contractor for “BUILDINGS/STRUCTURES” as listed in Schedule ‘A’ Part - I , inserted by MES.

Lumpsum price worked out by the contractor for “EXCAVATION, EARTH WORK, SITE CLEARANCE AND LAND DEVELOPMENT” as listed in Schedule ‘A’ Part - II , inserted by MES.

Lumpsum price worked out by the contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - III, inserted by MES.

Lumpsum price worked out by the tenderer for "INTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IV, inserted by MES.

Lumpsum price worked out by the tenderer for "ROAD / PATH / CULVERT/HARD STANDING" as listed in Schedule ‘A’ Part- V, inserted by MES.

Lumpsum price worked out by the tenderer for "SEWAGE DISPOSAL " as listed in Schedule ‘A’ Part- VI, inserted by MES.

Lumpsum price worked out by the tenderer for "AREA DRAINAGE" as listed in Schedule ‘A’ Part- VII, inserted by MES.

Lumpsum price worked out by the tenderer for "EXTERNAL ELECTRIC SUPPLY" as listed in Schedule ‘A’ Part- VIII, inserted by MES.

Lumpsum price worked out by the tenderer for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part- IX, inserted by MES.

Lumpsum price worked out by the tenderer for "DEMOLITION AND DISMANTLING" as listed in Schedule ‘A’ Part- X, inserted by MES.

Subtotal

NOTE: Schedule ‘A’ Part - XI (miscellaneous) are not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.

INTERNAL ELECTRIFICATION Supply and fix single phase tamper proof energy meter accuracy class 1 as per IS-13779, current rating 5 to 30 Amps, 230 volts with LCD display KWH, including polycarbonate enclosure etc complete , all as specified and directed.

Supply and fix ceiling fan, 5 star rating, 65% electrical saving with super efficient BLDC (Brushless Direct Current) motor with regulator and smart remote controlled suitable for convert from 230 V AC to 24 V DC, 1200mm sweep, 28 W power, down rod and canopy rating and the colour of milky white including anchor flusher, ceiling hook for fixing of fan on ceiling complete all as specified and directed.

S&F PVC Exhaust fans 225mm sweep single phase 230 Volt 50 Hz heavy duty, 1400 rpm, energy efficient smooth functioning with suitable size of louver including fixing arrangement, opening of hole, anchor fasteners complete all as specified and directed.

Supply and Fix LED type tube light fittings 4 feet long 1x20 W 230V, decorative ultra slim square profile liner LED lighting fixture with extruded polycarbonate environmental friendly, energy efficient tube light life time 40,000 burning Hrs, lumen output 2000lm, color temp-6000K, Surge protection of 2kV with voltage protection 160-360V, power factor >0.9 complete & prewired for LED tube complete fixed to wall / Ceiling by suitable down rods, PVC round blocks and connection by flexible PVC cable with stranded copper conductor from ceiling rose to connector of the fitting including 1x20W LED tube complete all as specified and directed.

Supply and fix indoor wall mounting mirror light fitting 12 Watt, 2 feet inbuilt electrical protection like overvoltage, short circuit and over load including driver with high efficiency and low power loss with high transmittance efficiency complete all as specified and directed.

Supply and fix LED 18 W, slim design profile surface/ ceiling mounted downlight with options of 700 to 2000 lumen suitable for indoor spaces ( Sit-Out/lobby), energy efficient fitting decorative type complete including housing all pre wired with high efficiency electronic driver complete fixed to wall/ceiling including connection by flexible PVC cable with stranded copper conductor including LED tube complete all as specified and directed.

Supply and fix LED bulb (Bipin holder type) 10 watts complete as specified and directed.

Supply and fix energy saving and environmental friendly long life LED 19 Watt bldg security light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection including all fixing arrangement, brackets, nut bolts, washer and connected from ceiling rose with tri colour flexible copper cable complete as specified and directed.

INTERNAL WATER SUPPLY Supply and fix angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron/cpvc pipe or for union and fixed for 16mm bore of pipe with long shank and cup complete all as specified and as directed.

Supply and fix 2 in 1 Bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, high pressure, screwed for iron/CPVC pipe and fixed suitable for 16mm bore cpvc complete all as specified and as directed.

Supply and fix CP health faucet 15mm dia with all fittings complete all as specified and as directed.

Supply and fix pillar tap long neck with aerator for sink of 16mm dia as approved complete all as specified and as directed.

EXTERNAL ELECTRIFICATION Supply, installation, testing and commissioning outdoor cubical LT feeder Distribution Panel suitable for 3 phase, 4 wire, 415 volts 50 Hz supply system, powder coated, dust/vermin proof. The panel shall be CPRI approved factory fabricated made with 3mm thick CRCA sheet for outer shell and inner shell made out of 2mm thick CRCA sheet, double door with front and back openable with locking arrangement, provision of threaded earthing stud at bottom, inner shell shall be compartmentalized. The TPN busbar and extensions link shall be insulated with colour coded heat shrinkable sleeves and shall be mounted on epoxy resin insulator. The MCCB shall be provided with copper Spreader link of suitable rating. All control wires shall be with 2.5 Sqmm multistandad copper conductor wire and shall be properly bunched, tied ferruled for proper identification and crimped with suitable size of lugs. The panel shall be mounted on 50mm x 50mm x 5mm angle iron stand of height 45cm above ground level and 45cm embedded in ground, danger notice plate having conventional symbol of bone and skull be provided. Including PCC foundation, excavation, grouting bolts. The panel shall consist of the following accessories:- (a) MCCB Four Pole 125 Amp, 25 KA , 50 HZ - 1 No. (b) MCCB Three Pole 100 Amp, 25 KA, 415 V, 50 Hz - 01 No. (c) MCB TPN 40 Amp,10 KA,230 Volts,50 Hz - 01 No. (d) MCB SPN 40 Amp,10 KA,230 Volts,50 Hz - 02 No. (e) MCB SP 20 Amp,10 KA,230 Volts,50 Hz - 02 No. (f) LED RYB Indicator lamps - 03 No.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below GL) with top edge of earth plate not less than 1.5 mtr below normal ground level, including provision of galvanized earth strip 32mm x 6mm, earth plate surrounded from all sides by with 15cm thick packed layer of charcoal dust and common salt filling in alternate layer and electrode connection by using galvanized earth strip 32mm x 6mm connected by mean of bolt, nut, check nut & washer of galvanised iron, provision of 40 mm dia GI pipe medium grade for protection of gi strip & 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6), type C1 chamber, MS funnel, wire gauge, 50mm thick RCC 1:2:4 TMT bars on both ways including necessary excavation in any type of soil returning filling in removal of surplus soil to distance n.exc 50mtrs complete all as shown in electrical plat no 5 of schedule part-1 2009 complete all as specified and directed.

EXTERNAL WATER SUPPLY M&L for cutting the existing GI pipe line 80mm dia and inserting Tee of size 80mm x 80mm x 50mm for making new branch conection of PP-R pipe of size 50mm dia including necessary fittings, excavation, returning and filling and depositing excavated material to a distance not exc 50Mtrs complete all as specified and directad.

M&L for Construction of masonry valve chamber of size 600mm x 600mm x 600mm internal size, 100mm thick foundation using PCC 1:4:8, type D-2, over 15cm thick hard core, 20cm thick solid block masonry with blocks cast using PCC 1:3:6, type C-1, set in cement mortar 1:4, 15mm thick plaster to internal surfaces and external surfaces up to 15cm below ground level and top of floor in cement and sand mortar 1:4, finished even and smooth with out using extra cement , 3.15mm thick MS sheet cover including 50mm x 50mm x 6mm thick MS angle frame fixed in PCC 1:2:4, type B1 coping with 25mm x 6mm flat iron hold fasts, handle, hinges with locking arrangements, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of surplus soil to a distance not exceeding 50Mtrs complete all as specified and directed.

HOT WATER SUPPLY Supply, install and test electric water heater (Geyser) vertical storage type of capacity 25 Ltrs to work on single phase, 230 volts, 50 Hz supply including provision of NRV, bolts, nuts, washers and grouting on walls and making good the disturbed portion to match with the existing surfaces and provision of suitable PVC pipe connection for hot and cold water connections with chromium plated brass check nuts incoming and out going and one non return valve complete all as directed

Subtotal

Prasur Electricals & Engineering Co.

Sree Tirumala Enterprises

RAVI REALCONS PRIVATE LIMITED

BHARAT MULTITECH INDUSTRIES PVT LTD

AMR TRADERS

Hindustan Traders