03SE2022-23 Pooth raajavaaha ke km 15.300 se km 18.100 ke madhy kshatigrast sevaamaarg ke naveeneekaran ka kaary (lot-3)

Amount

uprooting jhunds including back filling & dressing

GSB- Construction of granular sub - base by providing well graded material , spreading in uniform layers with motor grader on prepared surface , mixing by mixer in place method with rotavator at OMC , and compacting with smooth wheel roller to achieve the desired density , as per MORD specification 401 ( As per calculation sheet atech)

Providing laying spreading and compacting stone aggregates of specification sizes to water bound macadam specification including spreading in uniform thickness, hand packing rollding with three wheel 80-100kN static roller in stages to proper grade and camber MORD specification 405.2 (WBM-2)

Providing laying spreading and compacting stone agregates of specification sizes to water bound macadam specification including spreading in uniform thickness, hand packing rollding with three wheel 80-100 kN static roller in stages to proper grade and camber MORD specification 405.3 (WBM-3)

Brick Edging on both side of the road of M-150 bricks 7 cm wide 11 cm deep, laid with mud mortar including labour & supply of bricks finished to the required] template and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer in charge

Providing laying Prime coat With Bitumen emulsion (SS-I) on prepared surface of granular base inculding cleaning of road surfafe and spraying prime coat of 0.70 to 1.00 kg/sqm using mechnical means as technical Specification Clause 502

Providing and applying tack coat with bitumen VG-10 grade using bitumen pressure distributer at the rate of 0.30 kg. per sqm on the prepared granular surface treated with primer & cleaned with hydraulic broom as per technical specification clause 503.

Providing, laying and rolling of open grades premix carpet 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using VG-10 grade bitumen to required line grade and level to serve as wearing course on previously prepared bae by manual MORD specification clause 508.

Providing and applying seal coat by manual means with 80/100 grade bitumen sealing the voids in bitumens surface laid to the specified levels grade and cross fall using type C as per technical Specification Clause 510.

Earth work in filling in deep cuts of shoulders of road at various place including lift up to 1.5 m and lead up to 1.0 km by power transport .

Providing and suppling 2.5mm thick road making strip of specified shade/colour using hot thermoplastic material by fully /semi autometic thermoplastic paint applicator machine . including cost of material , labour , T&P and prepare surface etc. all complete.

VIJAY LAXMI ASSOCIATES

M/S SHANTI ASSOCIATES