HEW-555 Sector-75 Balance RECALL

[13.27]Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. [Through Rate]

[13.32]Providing and fixing bolts including nuts and washers complete. [Through Rate]

[24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. [Through Rate]

[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. [Through Rate]

[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]

[24.3.7.3]HT CABLE 7.3. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 33 KV grade as required : 240 to 400 sqmm [Through Rate]

[27.3]Plastering (12 mm thick) with cement mortar (1:3 ) on brick work in sub-structure as per MoRTandH Specifications 1300 & 2200 [Through Rate]

[6.1.1]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) [Through Rate]

[7.20.1]Brick work with common burnt clay modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand) [Through Rate]

Supply and erection of MS Rod earthing set (HT/LT) 20 mm dia 2.5 mtr. long MS rod, 6 SWG thick conduct pipe 25 mm dia and 3 mtr. long enameled black paint and 6 SWG GI wire complete in all respect upto entire satisfaction of engineer in-charge of work.

Supply and erection of PCC pole 9 mtr long as per IS: 1678-1960 specifications, 105mm x 115mm at top and 105mm x 315mm at bottom with working load of 200 Kg. buried 1.80m in ground or as per DHBVNL specification. (Rate without GST)

Supply and erection of 300 Sqmm single core cable un-armored made out of aluminum conductor, 650/1100 Volt confirming to ISS 1554(Part-I) of 1988 IS: 7098/Part-1/1988 with latest amendments and complete in all respect up-to the entire satisfaction of Engineer-in-Charge of the Work. (Rate Without GST). Make – Havells/KEI/Polycab

Supply, Stringing and Sagging 8 SWG G.I. Earth wire complete in all respect to the entire satisfaction of Engineer-in-charge conforming to IS 298/1978 and 7807/1973 and with latest amendment thereof. (Rate without GST)

Supply and erection of Cradle guard for L.T. Line made out of 8 S.W.G. G.I. wire and guard reel complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST)

Supply and erection of fuse unit of L.T. side suitable for 25 kva to 200 KVA transformer complete with wooden board, aluminum strips, MS clamp and nut and bolts including all petty material required up-to the entire satisfaction of Engineer-in-Charge. (Rate without GST)

Supply and erection of ACSR conductor of size 80 sqmm (Raccoon) conforming to IS 398 (Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments including stringing and sagging of conductor as well as jointing and binding with insulator at supports complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST)

Supply and Erection of M.S. D-strap made out of M.S Flat of size 40 x 6mm suitable for LT insulator 90mm x75mm with latest amendments complete in all respect up to the entire satisfaction of Engineer-In-Charge. (Rate without GST).

Supply and Erection of shackle insulator brown glazed of size 90 mm x 75 mm suitable for 415 /240 Volt confirming to IS 1545/1977 with latest amendment thereof complete in all respect up to the entire satisfaction of Engineer-In-Charge. (Rate without GST). Make- as approved by DHBVN

Supply and erection of underground cable of size 120 sqmm , 3.5 core armored , PVC insulated and sheathed loose in existing pipe or trenches 1100 volts core made out of aluminium conductor wires confirming to IS: 694:2010, including making necessary connections complete in all respect up to entire satisfaction of the Engineer-in-Charge of the work. (Rate without GST) Make: Havell’s /Polycab/KEI

Supply and erection of cable holding wooden cleat set with single grove suitable to hold cable of size 50 sqmm to 400 sqmm, made out of best quality of wood to withstand the load tension of cable and outdoor atmosphere complete with all labour and material complete in all respect. (Rate without GST)

Supply and erection of 30 sq mm PVC insulated ACSR conductor conforming to IS 398 (Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments including stringing and sagging of conductor as well as jointing and binding with insulator at supports complete in all respect up to the entire satisfaction of Engineer-in-Charge. (Rate without GST)

Supply and erection of L.T. PVC spacer spiral type, a set of 3 nos. spacers, for L.T. lines to maintain proper gap between the ACSR conductor complete with material and labour required to complete the job as per the entire satisfaction of the Engineer-in-charge. make - as per DHBVN (Rate without GST)

Supply erection testing and commissioning of chemical earthing with 3 mtr. long 75 mm dia G.I pipe filled with chemical, the chemical compound should have a low resistivity, ideally below 0.2 ohm-meter, to facilitate efficient grounding. complete in all respect up to entire satisfaction of Engineer-in-charge of the work. (Rare without GST)

Supply and erection of 150 mm dia. G.I. pipe (medium class) including sockets on both ends for dismissing of sharp edges for protection of cable complete in all respect as per entire satisfaction of engineer-in –charge.

Supply and erection of L.T. stay set for LT Line complete in all respect with G.I. stay wire( rope of 7 wires of 8 SWG G.I. Wire), egg/Disc insulator , G.I. with rod of 20 mm dia, 6 feet long, threaded up-to 250 mm long with nut (approx weight 6.224 kg) with cross of angle of 450mm each made out angle of size 65x65x6 mm(weight 5.33 kg), elbow (weight 2.24 kg ) complete with clamps , nuts and bolts complete in all respect up-to the entire satisfaction to Engineer-in-Charge of the work. (Rate without GST)

Providing and fixing 1.8 meters high G.I. wire mesh fencing with wire mesh made out of 8 SWG/4.0 mm G.I. wire of size 50mm x 50 mm, with2.50 meter angle iron posts 50 mm x 50 mm x 6 mm placed every 1.0 meters center to center founded in M15 grade cement concrete 0.7 meter below ground level, and 2 nos. horizontal angles 1.5mtr long and vertical flats 50mm x 6 mm of length 1.8mtr, 2 nos. horizontal channel 1.5mtr long with one entry gate of 1.0 mtr wide and 2.0 mtr.High, including priming and painting complete with all material, labour, welding, machinery charges complete in all respect up to entire satisfaction of engineer in charge of work (Rate Without GST)

Supply erection, testing, commissioning and energization of 400 KVA Transformer, Copper wound, having primary voltage 33 KV and 11 KV both options and Secondary voltage 0.433 KV, with off load tap changer, oil filled, 3 phase 50 Hz, copper double wound, Oil Immersed, Naturally Cooled, Core type transformer with latest ISI/IS Standard and as per DHBVN latest approved Specifications/GTP/ Drawings. The foundation should be as per approved by manufacturer. (Rate without GST). Make as per list attached.

Supply and erection of G.I. strip of size 35 mm x 5 mm made out of hot dipped galvanized flat as earth electrode for use of earth electrode for Chemical earhings/ Pipe earthing/ plate earthing complete with G.I nuts, bolts, washers including welding charges and labour charges. (Rate Without GST)

Supply and erection/ laying of 33 KV HT cable of size 300 sq mm x 3 core, aluminium conductor, Tree Retardant XLPE insulated (TR-XLPE), cable with latest IS/ISI Standards, as per DHBVN approved specifications/ GTP/drawings of DHBVN department, ISI marked, laid in existing pipe/trenches/ surface with all labour and material required to complete the job in all respect up to the entire satisfaction of engineer in charge of the work. (Rate without GST) Make: - As per list attached

Supply, Erection , Testing, commissioning and energization of 33/36 KV VCB outdoor type having 1 incoming and 1 outgoing, non-extensible type 36 KV voltage level and for use at 33 KV voltage level, rated current carrying capacity of Vacuum Circuit Breaker 630Amp, short time withstand current 26.3KA/3sec, 65.75 short circuit making current, degree of protection of main tank- IP67, SF6 type, 2.5 cycle opening time and 3 cycle closing time including the cost of power pack, all types of control cables and control system for protection of transformer , 33 KV touchproof end termination kit of reputed make like Raychem or any other reputed make recommended by manufacturer, suitable 33 KV touch prof boots, making of holes of suitable for 300 sqmm x 3 core TR XLPE cable, filling of gaps with M seal including all material and labour charges complete in all respect up to the entire satisfaction of engineer in charge of work , specification as per approved GTP of DHBVN (Rate without GST) Make as per list attached