Installation of 02 No. V.T. Pumps 2Cs each in Jyotisar Tirth, Kurukshetra.

Amount

Supply of erection and commissioning of vertical axial flow pump having discharge 2 cs as per approved specification complete (NS).

Supply, erection & commissioning of vertical squirrel cage induction motor solid shaft EFF1, Motor types TEFC, LT motor of rating 10 HP, 4 poles complete in all respect. (NS)

Supply, erection of delivery pipe 150mm i/d of thickness 8mm length 15ft complete including cost of 6 No. flanges and bends (NS).

Supply, erection & commissioning of submersible cables 4mm, 3 core of connection use complete as per approved specification (NS)

Supply, erection and commissioning of LT Panel as per detailsed incoming feeder=1 No. in Draw out racks with MCCB 100 Amp, 4 Pole, 50KA with adjusteable thermal and magnetic setting along with shunt trip=1 No. micro processor based relay for under and over voltage trip with adj. setting for voltage=1 No. Ampere meter with set of 3CT's resin cast class 1 and ASS=1 Set incoming feeder=1 Nos. complete with following (i) ACB B 1250 Amps, 4 pole 65KA along with shunt trip=1 No. indicators for 3 phase on incoming feeder of ACB-1aset volt meter with VSS=1 No. Copper Bus bar with insulation and its mounting for main MCCB incoming and outgoing and common feeder Emergency switch=1 No. Outgoing feeders=2 No. in draw out with MCCB 32 Amp, 3 pole 25KA with adjustable thermal and magnetic setting alongwith rotary handle=1 No. Ampere meter with set of 3 CT's resin case class 1 and ASS=1 set copper bus bar with insulation for connection with common feeder for MCCB's Fully automatic star delta type starter as per detailed specification enclosed and rating as detailed below suitable for operating 10 HP motor in IP 55 enclosure Air Break contractors 16A/16A/16A CT's for tripping relay should be protection type resin TCS relay to be used for point F of spec, should be if high accuracy and of ABB/BCH/L&T Schneider microprocessor based over current relay.