ADDN/ALTN AND SPL REPAIRS TO SINGLE OFFRS ACCN AT KALIMPONG UNDER GE 867 EWS

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings sheets in roof all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified and directed .

S & F 180mm dia half round PVC ( heavy grade) eaves gutter made of approved make, fixed with MS brackets complete all as directed .

S & F PVC (SWR) junction single, (Single T) equal equal, Running Outlet or unequal Suitable for 180mm eaves gutter, top portion half round and bottom portion to fit to 110mm bore PVC pipe all as specified and directed.

S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position (framed work) all as specified and directed.

Dismantling timber fillets, rails, posts rafters purlins etc under 40 Sqcm in section fixed in any position (unframed work) complete all as specified and directed.

S&F GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

S & F PVC false ceiling with light weight PVC hollow section panel made of 1mm thick and over all thickness of panel 7 mm thick and 200mm vide strip of colour teak/ wood grain / melamine finish, fixed in new false ceiling grid made of Aluminum/G.I/M.S/wooden complete all as specified and as directed. Note:- New false ceiling grid of aluminium/GI/MS/wooden if provided shall be measured and paid separately.

Dismantling boarding, any description, fixed in any position with nails all as specified and directed.

Dismantling Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement morter (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and smooth (without using extra cement) complete complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

M&L preparation of new plastered or unplastered surfaces of walls, applying 1mm thick plaster of paris and applying two coats of oil emulsion distemper over a coat of primer coat Chalk whiting, on plastered surfaces, prepara-tory to distempering on walls complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying one coat of plaster of paris of 1mm thick , primer coat Chalk whiting, on plastered surfaces, prepara-tory to distempering and applying two coats of oil emulsion distemper all as specified and directed.

M&L for preparation on newly plastered / previously untreated surfaces of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including 3mm thick wall care putty on wall complete all as specified and directed.

M&L scrapping of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces including 3mm thick wall care putty on wall complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

All as per item ser No 24 here-in before but on vertical surfaces such skirting/ dados etc including 15mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, including including 15mm thick rendering in CM (1:4) complete all as specified and as directed

M & L Granite (of any type) work 20MM thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed .

All as per item ser No 28 here-in before but on vertical surfaces such skirting/ dados etc including 15mm thick rendering in CM (1:4) all as specified and directed .

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

All as per item ser No 30 here-in before but on vertical surfaces such skirting/ dados etc including 15mm thick rendering in CM (1:4) complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor & paving not exceeding 15 cm thick below or above ground level all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded crushed stone agg as in plinth protection/ path laid slope of 1 in 12 and finshing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges or as directed.

Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

S&F approved pressed steel frame of size 125 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified.

S&F approved pressed steel frame of size 105 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified.

S & F 40mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with decorative face veneer with lipping/frame to match complete all as specified and directed .

S&F factory made 35 mm thick (batten thickness) Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&FStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed .

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief

S & F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed .

S & F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed .

S&F 150mm size Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts, but with barrel of extruded section and fixed all as specified and directed.

S&F 125 mm size extruded brass handles, fabricated type polished all as specified and directed.

S&F of 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repairs decorative type drapery curtain rod (curtain rails), of 25 mm dia powder coated with fixing . Including decorative Knobs and fixiing in pairs of brackets, stops etc complete all as specified and directed.

S&F in repair of PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern) white fixed in repair (excluding flushing cistern and flush pipe) incl Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device with recessed bottom complete all as specified..

S&F in repairs vitreous china table top wash basin of Size not less than 45 x 30 x 10.5 cm white colour complete all as specified and directed.

S&F in repairs Brass CP Single Lever Basin Mixer w/o Popup Waste (Tall) complete all as specified and directed.

S & F 32mm bore dia of discharge pipe Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms) complete all as specified and directed .

S&F 32 mm dia low density polyethylene (LDPE) pipes of pressure rating 6 Kgf / sq.cm complete all as specified and directed

S&F 32 mm dia Waste fittings (Waste cuppling), brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S & F Stainless steel sink with draining board, made out of not less than 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size not less than 915mmx460mm with bowl size not less than 410mm x 330mm x 160mm complete all as specified and directed .

S & F Waste fittings 40mm , brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S & F Sink Mixer with Swivel all as specified and directed by Engr-in-Charge

S & F CP Shower rose all as specified and directed by Engr-in-Charge

S & F Wall Mixer 3 in 1 System with Provision for Both Hand Shower and Overhead Shower with 115 mm Long Bend Pipe all as specified and directed by Engr-in-Charge

S&F Towel Rack not less than 600mm Long With Lower Hangers, Stainless Steel complete all as specified and directed.

S&F Paper Holder with Cover make hindware Cat. No : F840009 or equivalent make in Jaquar complete all as specified and directed.

S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as specified and directed .

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings and removal from site complete all as specified and directed.

S&F for GI tubes medium grade, 15mm bore, with all fittings, fixed to walls, ceiling or laid in floors including taking up or down steel tubing and connections, cleaning for refixing or removal to store etc complete all as specified and directed.

S&F Soap Dish (Brass) complete all as specified and directed.

S&F in repair 15 mm bore stop valve fancy type, chromium plated with long shank and cup, screwed both ends for iron pipe or for unions complete all as specified and directed

S&F in repairs, bib taps, 15mm, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed comple all as specified and directed.

S& F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F Aluminium andoised decogrill of approved design with apperture size not less than 50x50x5mm thickness, fixed with F, H or U aluminium anodised frame, making good disturbed surfaces to match with existing wall finish complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S & F SWG gully trap size 150 x 150 mm square or round mounted type ‘S’, setting and jointed with solvent cement complete all as specified.

S&F of 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F of 110mm bore PVC (SWR) Vent cowl complete all as specified and directed .

S&F of 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F of 110 X 75 mm bore PVC (SWR) reducer including jointing with solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.

S & F of 110mm bore PVC (SWR) bends complete all as specified and directed .

S & F of 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed .

S & F of 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed .

S&F Health Faucet (Brass) with Double Lock 1m Brass Plated Flexible Hose & Wall Hook , Product Code: F160002 Continental make hindware or equivalent make in Jaquar

S & F chromium plated connections pipe 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple (Suitable for Geysers,Suitable for Basin Mixers)

S & F Kitchen plates rack made out of stainless steel not less than 0.50 mm thick sheet with partitons and size of rack not less than 800x250x900mm with shape and pattern as per sample kept in Sample room of GE Office complete all as specified and directed.

M&L for Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.

M&L for Hardcore of broken stone are boulders of gauge n.exe. 100 mm , deposited, spread and leveled in layers n.exc. 75 mm thick , watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick Cement concrete (PCC) 1:3:6 (40mm graded aggregate) Type C2 of as in sub base complete all as specified and directed .

M & L for screed bed or bedding layer in Cement Mortar 1 : 6 of 20mm thick for laying floor finishes complete all as specified and directed by Engr - in- Charge.

M&L for coloured & polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry complete all as specified and directed .

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for 75mm thick cement concrete (1:4:8), Type D2 using 40mm graded stone aggregates as in sub base complete all as specified and directed.

M&L for 25 to 40mm thick sand filling under floor or in foundation including water and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade, with grey cement and no pigment complete all as specified and directed.

S & F PVC decorative eaves boards 12 mm thick and 23 cm Wide fitted with flat iron 25x3mm brackets @ 0.90m c/c complete all as specifeid and directed by Engr- In Charge.

Demolition and breaking up old broken , PVC (SWR) , Cast Iron, AC, SWG soil waste and vent pipe of 75/100mm bore including accessories set in cement mortar and removing rubbish from site complete all as specified and directed .

Excavation over areas n.exc. 1.5m getting out in soft/loose soil complete all as specified and directed Engineer-in-Charge.

Excavation over areas n.exc. 1.5m getting out in hard/dense soilcomplete all as specified and directed Engineer-in-Charge.

Excavation over areas exc. 1.5m and n.exc. 3m getting out in hard/dense soil soilcomplete all as specified and directed Engineer-in-Charge.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soilcomplete all as specified and directed Engineer-in-Charge.

M & L Brickwork with subclass ‘B’ bricks, in one and half brick thick honey comb walling built in Cm 1:4 complete all as specified and directed.

M&L for Brickwork with with locally availaible best quality subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed Engineer-in-Charge.

M&L PCC cast-in-situ Type B1 1:2:4 (20 mm graded aggregate) in lintel upto 1.50m clear span, cills, steps, seismic and other similar bands, plith course, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates , kerbs , water through and the like weathering slightly rounded or chamfered angles and throating as directed.(Note:-(a) The unit rates include for use of formwork (straight or curved). (b) Concrete items if so indicated, shall be reinforced. Reinforcement shall be measured separately).

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed Engineer-in-Charge.

M & L Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening complete all as specified

S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

S&F of TMT bars 8 mm dia cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed Engineer-in-Charge.

M & L RCC 1:2:4 type B1 ( using 20mm stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed .

M & L half brick wall in sub class B brick built in CM (1:4) complete all as specified and directed Engineer-in-Charge.

M&L 10 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on fair face of brick work finished even and smooth mixed with integral water proofing compound in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

M&L rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth using extra cement mixed with intergral water proofing compound all as specified and as directed. (Note:WPC measured and paid separately)

S & F PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed .

M & L Loose filling with broken brick aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.

M & L Cement concrete in 1:4:8 Type D2( 40mm graded aggregte) in foundations, filling and mass concrete complete all as specified and directed .

M & L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 25mm thick as in floor ( IPS) including finshin even and smooth with using extra cement completed all as specified and directed.

M & L Providing precast ce- ment concrete Type B1 1:2:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specefied and directed.

Supply only integral water proofing compond all as specified and as directed.

M & L Concrete bed in PCC 1:4:8 type D2 (using 40mm stone aggregate) to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed .

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 M in depth and getting out in ordinary soft/ loose soil complete all as specified and directed.

Returning filling in trenches including spreading leveling watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified.

Removing excavated surplus materials to a distance not exc 50 M and depositing where directed at a level not exc 1.5 M above the starting point all as specified and as directed.

Taking down 40mm bore steel tubing and connections with all fittings including cleaning for refixing or removal from site complete all as specified and directed .

Taking down 25mm bore steel tubing and connections with all fittings including cleaning for refixing or removal from site complete all as specified and directed .

Taking down 20mm bore steel tubing and connections with all fittings including cleaning for refixing or removal from site complete all as specified and directed ..

Refixing/relaying old steel tubing including GI fittings wherever required in new or old position of 40mm bore complete all as specified and directed.

Refixing/relaying old steel tubing including GI fittings wherever required in new or old position of 25mm bore complete all as specified and directed.

Refixing/relaying old steel tubing including GI fittings wherever required in new or old position of 20mm bore complete all as specified and directed.

Supply and laying testing steel water tubing medium grade with all fitting fixed to wall/ceiling or laid in floor of size 40 mm bore complete all as specified and directed .

Supply and laying testing steel water tubing medium grade with all fitting fixed to wall/ceiling or laid in floor of size 25 mm bore complete all as specified and directed .

Supply and laying and testing steel water tubing medium grade with all fitting laid in fixed to wall/ceiling or floor of size 20 mm bore complete all as specified and directed .

Supply and fixing Rotational moulded polyethylene water storage tank (triple layer) (cylindrical vertical with closed top) hoisted and fixed in position with all fitting such as tank nipple and locking arrangement all as specified in SSR Part-I of capacity 1000 ltr including S&F brass valves with polythene float and fly nut complete scerwed for iron pipe of brass ferrule and fixed of size 25 mm.

Supply and fixing gun metal globe valve iron wheel screwed both end for iron pipe fixed all directed of size 20 mm complete all as specified and directed .

Supply and fixing gun metal globe valve iron wheel screwed both end for iron pipe fixed all directed of size 25 mm complete all as specified and directed .

M&L compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc conforming to Fe 410-w (Fde - E- 250) Quality A & painting with two coat of black bitiminious paint over a coat of Red Oxide primer complete all as specified by Engr-in-Charge.

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating, as directed .(Note:-(a) The unit rates include for use of formwork (straight or curved).

M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surfaces, rendering finished even and smooth (without using extra cement complete all as directed.

M&L for providing precast cement concrete solid block over 10 cm in width and setting in mortar 1:6 using pre cast cement concrete block 1:3:6 type C1 using 20 mm graded stone agg all as specified and directed.

Taking down copper/aluminium point wiring (light fan, Socket or power ) Complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. complete all as specified and directed .

Disconnection and taking down distribution boards, switch fuse unit, , enclosure for MCB including MCB's of any type and size and keeping aside for reuse of serviceable one.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping not less than 20mm size, medium grade with all necessary fittings, surface wiring , for light / E/fan/Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes (concealed type in permanent bldg and surface in temporary bldg or as directed ) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion all as specified and directed .

All as per item No 144 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board.

All as per item No 144 here-in-before but One 3 pin socket outlet 5 Amps on the same board with other switchs with cables 1.5 Sqmm size.

All as per item No 144 here – in – before but for one switch socket outlet 15 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.

Supply and fix switch piano flush button, single pole, 5 amps, one way all as specified and as directed.

Supply & Fixing Bell, AC 230 Volts single pole including mounting block all as specified and as directed.

Supply & fixing Bell push flush type, 5 Amps button complete all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.

Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type all as specified and as directed.

Supply and fixing switch socket combination 2 – in – one 6 Pin , 5 / 15 amps flush type universal all as specified and as directed.

S & F Energy efficient LED tube light fitting not less than 4", not less than 1x22 watt, with bipin holders, connector block, CCT - 6500K, system output lumen not less than 2000lm, extruded aluminium housing with high quality Polycabonate diffuser, wide voltage protection range 140V-270V including connecting up with PVC insulated 3 core sheathed 0.5 sqmm copper conductor two numbers PVC mounting blocks for fixing of fitting complete all as specified and as directed.Make : Philips, Model - TMC 501, TMC 501P 1XT-LED 22W P3241 or equivalent of Havells/ M/s Simoco Telecommunications (South Asia) Ltd/ M/S Jaquar & Company Pvt Ltd / M/s HPL Electric & Power Ltd /M/S Eveready Industries India Ltd / M/S Crompton Greaves Consumer Electricals Ltd/ M/S Halonix Technologies Pvt Ltd / M/S Century LED Ltd (Brand MAGIK) /M/S C&S Electric /M/s Panasonic Life Solutions India Pvt Ltd (Brand: Panasonic)/ M/s Dhanashree Electronics Ltd (Brand: RASHMI) / M/s SORIL Infra Resources Limited/ M/s Syska LED Lights / M/s Surya Roshni Limited (External / Internal)/ M/s Orient Electric Limited (a CK Birla Group Company)

Supply, Fixing, Testing & Commsioning of IP66 & IK09 integral LED Bulk Head luminaire with housing made of Pressure Die Cast alumunium & Optical cover made of Opal Polycarbonate for glare free lighting . System Lumen Output of minimum 600 lumens. Power Consumption should not exceed 10W (Including Driver Loss). For Glare free lighting luminaire should be with Opal diffused Polycarbonate complete all as specified and as directed.Make : Philips, Cat part No. WT 202W LED 6S CW PSU S2 PC or equivalent make of Havells/M/s Simoco Telecommunications (South Asia) Ltd/ M/S Jaquar & Company Pvt Ltd / M/s HPL Electric & Power Ltd /M/S Eveready Industries India Ltd / M/S Crompton Greaves Consumer Electricals Ltd/ M/S Halonix Technologies Pvt Ltd / M/S Century LED Ltd (Brand MAGIK) /M/S C&S Electric /M/s Panasonic Life Solutions India Pvt Ltd (Brand: Panasonic)/ M/s Dhanashree Electronics Ltd (Brand: RASHMI) / M/s SORIL Infra Resources Limited/ M/s Syska LED Lights / M/s Surya Roshni Limited (External / Internal)/ M/s Orient Electric Limited (a CK Birla Group Company)

15. Supply and fixing wall mounted LED luminare, not less than 1x 10 watts with glass shed, prewired with holder, including one 10 watts LED lamp, complete all as specified and as directed. Make- Havells City 3 Cat No- LHDL06160099 or equivalent model of Philips/Bajaj /M/s Simoco Telecommunications (South Asia) Ltd/ M/S Jaquar & Company Pvt Ltd / M/s HPL Electric & Power Ltd /M/S Eveready Industries India Ltd / M/S Crompton Greaves Consumer Electricals Ltd/ M/S Halonix Technologies Pvt Ltd / M/S Century LED Ltd (Brand MAGIK) /M/S C&S Electric /M/s Panasonic Life Solutions India Pvt Ltd (Brand: Panasonic)/ M/s Dhanashree Electronics Ltd (Brand: RASHMI) / M/s SORIL Infra Resources Limited/ M/s Syska LED Lights / M/s Surya Roshni Limited (External / Internal)/ M/s Orient Electric Limited (a CK Birla Group Company)

Supply and fixing lamp holder insulated body with back plate for batten fitting all as specified and as directed.

S & F in LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 5 W complete with tube rod all as directed.

Supply and fixing Sheet metal enclosure for MCB TPN DB’s, Phosphatised Powder Painted Double door 200 amp rated, Triple pole and neutral link of 4 way 415 volt AC including provision of MCCB, 4 Pole, 63 Amp, 16 KA complete all as directed. Make- M/s C&S Electric Ltd/M/s Novateur Electrical & Digital Systems (Optipro) or any approved make.

Supply and fix MCCB, Tripple Pole & Neutral, 63 Amps, 415 volts, 50 Hz, 16kA complete all as specified and directed . Make- M/s Larsen & Toubro Ltd/M/s Havells India Ltd MCB (Brand-Max3, EURO-II), MCCB (Brand- HIM & HIX)/M/s Panasonic Life Solutions India Pvt Ltd (Switch Gear: Panasonic) /Legrand/Siemens/Schneider.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC complete all as directed. Make- M/s C&S Electric Ltd/M/s Novateur Electrical & Digital Systems (Optipro) /Legrand/Siemens/Schneider.

Supply and fixing MCB Single pole and neutral upto 40 Amps capacity 10 KA 240 Volts 50 HZ. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp,suitable protection complete all as specified and directed . Make- M/s Larsen & Toubro Ltd/M/s Havells India Ltd MCB (Brand-Max3, EURO-II), MCCB (Brand- HIM & HIX)/M/s Panasonic Life Solutions India Pvt Ltd (Switch Gear: Panasonic) /Legrand/Siemens/Schneider.

Supply and fix MCB/Isolator single pole (SP), 10 kA of 6 Amps to 32 Amps capacity 240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, suitable protection complete all as specified and directed . Make- M/s Larsen & Toubro Ltd/M/s Havells India Ltd MCB (Brand-Max3, EURO-II), MCCB (Brand- HIM & HIX)/M/s Panasonic Life Solutions India Pvt Ltd (Switch Gear: Panasonic) /Legrand/Siemens/Schneider.

M&L for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated FRLS cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC conduit concealed in wall.(Note Two run of 6 Sqmm and one run of 6 Sqmm wire including one run of 25 mm dia cunduite shall be measured as one unit length including taking down of old servicible sub main wiring.

Taking down KWH and keep in safe custody and refixing the same as including necessary electric connection from main to KWH meter and KWH meter to out going distribution board complete all as directed .

Supply and fix electric water heater, storage type steel body with copper inner tank and heating lement upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including necessary electric/water connection grouting of MS fastener of suitable size complete all as specified and directed .Make:M/s V-Guard Industries Ltd (upto 35 ltr) or any approved make.

S&F metal plug socket single pole and neutral encloser with two pin earth plug with 01 No MCB SP 20 Amp, C series complete all as specified.

M&L for making hole in the existing wall/building without distrubing to existing infrastructure for fixing of exhaust fan complete including making good to match with the existing specification complete all as directed .

Supply and Fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed . Make : M/s Havells India Ltd or any approved make.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I and as directed.

S&F LED security light suitable for not less than 35 W LED with pressure di cast housing with epoxy power coated drak graphite grey colour finish , Prismatic ploycarbonate cover with individual LED lenses, IP65 by using 25mm dia GI bracked fixed on wall by means of nuts, botls and clamps. Make : M/s Simoco Telecommunications (South Asia) Ltd/ M/S Jaquar & Company Pvt Ltd / M/s HPL Electric & Power Ltd /M/S Eveready Industries India Ltd / M/S Crompton Greaves Consumer Electricals Ltd/ M/S Halonix Technologies Pvt Ltd / M/S Century LED Ltd (Brand MAGIK) /M/S C&S Electric /M/s Panasonic Life Solutions India Pvt Ltd (Brand: Panasonic)/ M/s Dhanashree Electronics Ltd (Brand: RASHMI) / M/s SORIL Infra Resources Limited/ M/s Syska LED Lights / M/s Surya Roshni Limited (External / Internal)/ M/s Orient Electric Limited (a CK Birla Group Company)/Philips/Wipro/Bajaj/Havells.

M&L in repairs for sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC casing caping on wall.(Note Three run of 4 Sqmm including one run of 25 mm dia conduite shall be measured as one unit length including taking down of old servicible sub main wiring.

Note 1:- (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected.

PRASAD PRADHAN AND SON

S K ENTERPRISES

HEM RAJ GURUNG

GEETA CONSTRUCTION

SUNIL PRADHAN

SANJAY SAW MILL

MS MAYA PRAKASH GOEL AND SONS

MS BRAHMA CONSTRUCTION