Certain Repair Work including Tilling, Flooring, Repair of Roof and connected B/R nature items in Taurus Sainik Aramgrah and MT Line in the area of AGE B/R-II under GE (West) Delhi Cantt-10.

Amount

Dismantling of floor, hearth or wall tiling including internal layer of terrazzo dado and mortar bedding removing rubbish of the premises complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down cement plaster or any description including raking out joints, hacking for key, scrubbing down with water etc and removal of debris to a distance not exc 50 mts and depositing where directed.

M&L for light shade vitrified joint free tiles 7 to 8mm thick (square/rectangular) polished, area of each tile n exc 0.36 sqm, in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 etc complete all as specified and directed.

All as per item No 6 above but on vertical surfaces of wall over & incl CM (1:4) 10mm thick cement plaster etc. complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surfaces 600x300X7-8 mm thick joint free as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10mm thick in cement mortar 1:4 on brick wall of concrete surfaces and finished fair and even complete all as specified and directed.

M & L for coloured non-skid ceramic tiles 7 to 8 mm thick ( square / rectangle) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc set and set and jointed in neat cement slurry and pointed in white or coloured cement to match the work including 15 thick screed bed in CM ( 1:6) complete all as specfied and directed.

M&L for coloured joint free non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including cement screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregates as in lintels, landings, coverslabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified..

M&L for 18-20 mm thick black granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in including 15mm thick screed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl polishing and rounding of edges complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as per specified.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick rendering in CM 1:4 and jointed with ditto as per above item no 75.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, AC sheet etc.) or insulation boards/ slabs/blankets, any thickness, including cover fillets any description fixed in any position complete all as specified and directed.

M&L for anodised aluminium snap grid frame work for false ceiling of size 605x605mm including hanger 6 mm dia G.I. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

M&L for gypsum board 12 mm thick in ceiling fixed with screw as per maufacturer's instruction complete all as specified and directed .

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, ending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

Dismantling of 100 mm dia Cast Iron pipe (Soil/waste/vent) with fittings from walls, on floors & from trenches if required including taking out any type of joints complete all as specified and directed.

All as per item No. 19 above but 75mm dia.

Taking up or down GI tubing 15mm bore and connections including all fittings complete all as specified and directed.

All as per item No. 21 above but 20 mm bore .

S&F 100 mm dia (bore of pipe) cast iron (sand cast) soil,waste and vent pipe in any length , with or without ears with cement joints and laid in trenches/floor complete all as specified and directed.

All as per item No 23 but fixed to walls complete all as specified and directed.

S&F 75 mm dia (bore of pipe) cast iron (sand cast) soil,waste and vent pipe in any length , with or without ears with cement joints and laid in trenches/floor complete all as specified and directed.

All as per item No 25 but fixed to walls complete all as specified and directed.

S&F 100 mm dia (bore of pipe) cast iron bends,Tee, diminishing pieces or tapers with cement joint fixed complete all as specified and directed.

All as per item No. 27 above but 75mm dia (bore of pipe) complete all as specified and directed.

S&F 100 mm dia (bore of pipe) cast iron with oval access door bends ,Tee, diminishing pieces or tapers with cement joint fixed to walls complete all as specified and directed.

All as per item No. 29 above but 75mm dia (bore of pipe) complete all as specified and directed.

S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with cement joint complete all as specified and directed.

S&F 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with cement joint complete all as specified and directed.

S&F 100mm bore cast iron socket (double) collars with cement joint complete all as specified and directed.

S&F 75mm bore cast iron socket (double) collars with cement joint complete all as specified and directed.

S&F in repairs Cast iron floor trap with 75mm dia outlet, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Taking down PVC pipe, eaves and gutters (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including all necessary fitting,extra joints and stack clamps stay including bolts and nuts complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

M & L for cutting chases, pinning in brick wall for concealed GI pipe , cutting n.exc 10cm girth and making good to facings where required and pointing in cement mortar 1:3, complete all as specified and directed.

S&F GI tubing 15mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings including all fitting on walls/ceiling or laying in floors complete all as specified.

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcomplete screwed for pipe complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia complete all as specified and directred.

S&F 500 ltrs capacity rotationally moulded polythene three layered water storage tanks (cylindrical vertical with closed top) multilayers layers of approved make hoisted & fixed at position and dismantling of old tank complete all as specified and directred.

S&F in repair 20mm bore GI tank nipple suitable for HDPE water tank complete all as specified and directred.

M&L for brick work with sub class 'B' old size burnt bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

M&L Brick work with sub class 'B' old size burnt bricks staight or curved on plan to any radius in half brick thick wall built in CM 1:4 etc complete all as specificed and directed.

M&L for 15 mm thick rendering in ready mix mortar on walls as whole or in patch on any faces of brick/concrete finished even and fair without using extra cement including necessary scaffolding and taking down old plastering complete all as specified and directed.

M&L for 5 mm thick rendering in ready mix mortar on ceiling as whole or in patch on any faces of brick/concrete finished even and fair without using extra cement including necessary scaffolding and taking down old plastering complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying two coats of Oil bound distemper with roller complete over a coat of wall care putty (minimum thickness 1 mm) all as specified and as directed.

M&L for preparation of new surfaces of ceiling and applying two coats of Oil bound distemper with roller complete over wall care putty (minimum thickness 1 mm) all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint with roller over a coat of wall care putty (minimum thickness 1 mm) complete all as specified and as directed.

S&F in repairs spindle for 15mm CP / brass suitable for existing CP bib cock, stop cock & concealed stop valves, WHB mixers, wall mixers, pillar cocks etc complete all as specified and directed. Make : Marc/Shakti

S&F in repair 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. Make : Shakti Cat No. SB-1123 or Prayag Cat No. 121-E

S&F in repair 15mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. Make : Shakti Cat No. SB-1144 or Prayag Cat No. 144-E

S&F in repair 15mm bore pillar tap of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. Make : Shakti Cat No. SB-1130 or Prayag Cat No. 130-E

S&F in repairs 10 ltrs capacity PVC valveless syphonic action type low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified.

S&F in repair vitreous china wash hand basin (flat black) white of size 550x400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets and coupling of suitable size complete all as specified.

S&F in repair 15mm dia brass chromium plated centre hole mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including connection pipe complete all as specified and directed. Make : Shakti Cat No. DES-7513 or Prayag Cat No. PIS-50H or Kerovit Cat no. KB511027

S&F in repair 15mm dia wall mixer with conversion bend 2 in 1 chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed. Make : Shakti Cat No. DES 7517 or Prayag Cat No. 9375N or Kerovit Cat no. KB511019

S&F in repair angle valve 15mm bore dia brass chromium plated fancy type, screwed down, new high pressure with lever type , chromium plated for iron pipe or unions complete all as specified and directed. Make : Shakti Cat No. DES 7506 or Kerovit Cat no. KB511003 or Prayag Cat No. 9310 N

S&F in repair brass CP bib taps long body 15mm bore with lever type handle complete all as specified and directed . Make : Shakti Cat No. DES 7503 or Kerovit Cat no. KB511004 or Prayag Cat No. 9306 N

S&F in repair 15mm dia Pillar taps fancy type, cast copper alloy, with lever type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. Make : Shakti Cat No. DES 7501 or Kerovit Cat no. KB511001 or Prayag Cat No. 9302 N

S&F in repair sheet glass shelf size 450mmx100mm with stainless steel railing fixed to wall with wooden plug and screws complete all as specified and directed . Make : Shakti Cat No. SB-9842 or Prayag Cat No. BEA-45G

S&F in repair 5.5mm thick sheet glass corner shelf 300 mm size in toilet and bath including stainless steel railing and CP bracket complete all as specified and directed. Shakti Cat No. SB-9846 or Prayag Cat No. BEA-44G

S&F in repair brass chromium plated soap dish fancy type fixed to wall with CP brass screws complete all as specified and directed. Make : Shakti Cat No. SB-9812 or Prayag Cat No. GBA-135

S&F in repairs chromium plated brass overhead shower rose 100 mm size swivel type with 225mm long chromium plated arm rod including fixing to steel pipe or union complete all as specified and directed .

S&F in repair Brass chromium plated toilet paper holder fancy type with flap fixed to wall with CP brass screws of standard size complete all as specified and directed. Make : Shakti Cat No. SB-9975 or Prayag Cat No. GBA-118S

S&F in repair brass chromium plated health faucet with 1.0 mtr SS flexile pipe 15 mm dia fixed to angle valve complete all as specified and and directed as per sample approved by GE . Make : Shakti Cat No. SB-9853 or Prayag Cat No. GBEA-1006

S&F in repair vitreous pedestal pattern (European type) water closet pan white cast iron P or S trap type including provn of fixing bolt and plastic seat cover heavy duty with hinging device including 32mm dia flush pipe complete all as specified and directed.

S&F in repair one piece vitreous china wash down water closet pan white/coloured cascade type size 380x630x770mm (monolithic flush cistern type) single piece wc with PP seat cover,Hinges fixing accessories set including flush cistern all as per manufacturing instructions and all as specified and directed.

S&F in repairs PVC Connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair brass chromium plated steel tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern' size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including supply and fixing 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed.

S&F in repair 100mm bore cast iron 'P' Traps complete all as specified and directed.

S&F in repair brass chromium plated grating 100 mm dia with or without waste hole, complete all as specified and directed

S & F in repairs plastic water closet seat cover white (Heavy duty), closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device suitable for existing WC complete all as specified and directed.

S&F in repair kitchen plate rack with four shelves made out of stainless steel sheet minimum 1 mm thick overall size 90x90x25cm including taking out old plate rack complete all as specified.

S&F in repair sinks made of stainless steel 1 mm thick in kitchen with plugs, washers including coupling and waste pipe, fixed in RCC slab in kitchen and connecting to trap, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified.

S&F in repair Stainless steel sink with draining board, made of stainless steel 1 mm thick for kitchen or laboratory with plug, washers waste pipe and coupling, cast iron cantilever brackets,connecting union overall size 1140mmx510mm with bowl size 510mm x 406mm x 203mm complete all as specified.

S&F in repair 32mm dia 125mm long sink coupling for Stainless steel sink complete all as specified.

S&F in repair 32mm dia Chromium plated brass coupling for WHB complete all as specified.

S&F in repair 32mm dia PVC waste pipe for WHB/sink with union complete all as specified and directed.

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

Removing mud phuska/soil material exc.250 m but n exc. 500 m and depositing where directed.

M&L for brushing neat cement slurry with 3 kg of cement per square metre complete all as specified and directed.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.

M&L 10 mm thick screed bed or bedding layer of mortar in CM(1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface. Note: WPC shall be measured and paid separately

Supply only Integral water proofing compound.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric(wt. not less than 150 gms/sqm) land on primed surface by forced apllication complete all as specified.

Supply and fixing Heat Resistant Terrace Tiles(300mmx300mmx20mm) with SRI(solar refractive index)>78,solar reflection>0.70 and initial emittance>0.75 on waterproof and sloped surface of terrace,laid on 20mm thick cement sand mortar in the ratio of 1:4 (1 cement:4coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1,including rubbing and polishing of the surface upto 3 cuts complete,including providing skirting upto 150mm height along the parapet walls in the same manner complete all as specified and directed.

M & L Cover fillet in Plain Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate min radius of 75mm tk as in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, incl necessary sloping on roof including form work complete all as specified.

Taking down door/window frames with shutters with shutters (without taking off shutters from the frames) n.exc 1.5 sqm each complete all as specified and directed.

Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) all as specified.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

S&F for pressed steel frames made of 1.25mm thick MS sheet of profile 125x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

S&F steel window with side hung shutters including box type hinges with steel handle,and steel peg stay,complete with glazing bars,dovetailed or welded complete all as specified and directed

All as per item no.100 but without glazing bars.

S&F fibre glass reinforced plastic (FRP) door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame moulde with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame as per specification & a complete all as specified.

S&F FRP door shutter 30mm thick glass fibre reinforced plastic (FRP) moulded door shutter of required colour and approved brand and manufacturer made with retardant grade unsaturated poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 supply and fixing in the frame at site complete all as per specified and as directed.

S&F 100 mm Stainless steel butt hinges medium weight cold rolled fixed to doors with SS screws complete all as specified and directed.

S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 125mm long aluminium handles cast type anodised ISI Marked complete all as specified and directed.

Dismantling wrought iron/mild steel work in any position complete all as specified and directed

M&L Rolled Mild Steel Framed work such as grills,gratings with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L Rolled Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming Fe.290.Gde-E-165 complete all as specified and directed.

S&F 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints,including fixing in wall with screw/ hold fast / cement concrete complete all as specified.

S&F 40mm thick Flush door shutters,solid core construction,with particle board core and plywood face panels,commercial type,both faces are covered with decorative face veneer with lipping/frame to match complete all as directed and specified by Engr-in-Charge.

S&F 2nd class hardwood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass/guage etc. (with sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass /wire cloth complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete all as specified and directed.

S&F anodised aluminium barrel tower bolt extruded sections 200 mm size complete all as specified and directed.

S&F 150mm long, Aluminium handles, cast type,anodised complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for preparing previously untreated wood and wood based material of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surface.

M&L for preparing previously untreated steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of redoxide primer including preparation of surface.

M & L for preparation of old decorated surfaces of walls including filling depressions/chipping or minor repairs with putty and applying one coat of Oil Bound Distemper including cleaning of OBD stains on floor/window/joinery surfaces complete all as specified and directed.

M&L for preparation of old decorated wall surfaces and applying one coat of cement based paint complete all as specified and directed.

M&L for preparation of old surfaces of ceiling and applying one coat of Oil bound distemper with roller complete all as specified and as directed.

M&L for applying two coats of 100% Premium acrylic emulsion(Weather coat) paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over primed old decorated wall surfaces complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed .

Dismantling boarding and description (board/plywood) fixed in any position with screw, complete all as specified and directed.

S&F for 18-19mm Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white laminationas in CB shutter, lipping and necessary rebating for double shutter where required and polishing to lipping fixing complete to wall with fasteners complete all as specified.

S&F for Extra over rates of block board or veneered particle board for external teak wood lipping,6mm thick fixed with nails complete all as specified and directed.

S & F in repair Continuous (piano) hinges, mild steel bright finished or electrogalvanised, width of flap (when open) 30 mm complete all as specified and directed.

M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium frame section for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung/top hung type without sash bars, partly fixed type, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

M&L powder coated aluminium 50 micron anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5 mm thickness weight of 1.07 Kg/m and of shutter size 40mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick section, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with steel wire stapples 5mm thick plain glass including necessary fitting/fixture/aluminium snap beads complete all as specified. (Note : Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixtures and no extra shllabe apid separately. Cost of glass and wire cloth included herein complete all as specified and directed.

S&F in repair 20 mm dia stainless steel tube for curtain rod including pair of suitable S.S brackets and finials approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed.

S&F in repair aluminium door seal having Rubber strips (size 0.80m TO 1.2m and 50mm wide) complete all as specified and directed.

S&F in repair 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S&F in repair Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair 75 mm long aluminium anodised hasp and staple safety type including bolt to hinge plate fixed with screws complete all as directed

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames metal frames or stone,concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed.

S & F 4mm thick Figured glass ,pin head type and glazing with rubber gasket in square n exc 0.5 sqm in each pane etc complete all as specified and directed.

S & F 4mm thick ordinary sheet glass fixed with clips and putty or with aluminium snap beading complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples, etc complete all as specified and directed.

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staples including wooden beading complete all as specified and directed .

S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specfied and directed.

M&L for welding in repairs n. exc 2.5cm in length Thickness of Metal to be welded is not exc 6mm thick complete all as specified and directed by Engineer-in-Charge

M&L for Coloured Cement concrete Pre polished chequered tiles 30cm X 30cm X 25mm thick machine pressed; set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 and cut and pointed with white cement and pigment complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete interlocking paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand and dismantling of existing stone slabs complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.

S & F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

Removal of Vegetation from wall and roof by cutting shrubs, wild growth/tree not exc 30cm girth and removing complete vegetation growth from walls including taking out roots from roof/brick walls and making good the disturbed surface with PCC 1:2:4 type B-0 or CM 1:3 as directed by Engr-in-charge and disposing the rubbish from site (MoD land) for upto eight storey block complete all as specified and directed

M & L for 75 mm thick plain cement concrete 1:3:6. type C-2 (using 40mm graded aggregate) as in plinth protection complete all as specified and directed.

M & L for Raking out joints/pointing to brick work or brick tiles laid flat on roofs in cement mortar and M&L flush pointing in CM 1:4 to bricks laid flat or brick tiles in pavings, roof terracing etc complete all as specified and directed by Engineer-in-Charge

tomar and associates (BID ID -3345888)

M/S Laxmi Construction (BID ID -3354662)

STAR CONSTRUCTION CO (BID ID -3346118)

M/S DSSP Construction Co. (BID ID -3340524)

M/s M M BAHL (BID ID -3347271)