SPECIAL REPAIRS TO BLDG NO 3F, 3FB AND 3GH OF RA LINE AND SPECIAL REPAIRS TO ROOF OF BLDG NO E-13 AT NAGZEERA LINES OF HQ JL WG, THE INF SCHOOL, BELGAUM UNDER GE BELGAUM

Amount

Dismantling single layer Mangalore pattern roofing tiles and ridges in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit complete all as specified and as directed.

Dismantling battens for tiles, shingles etc. spaced exc 15cm for unframed work. in roofing and removing rubbish off the premises and old unserviceable battens taken as credit complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work and removing rubbish off the premises and old unserviceable timber scantlings taken as credit complete. all as specified and as directed.

Material and labour for 2nd class hard wood timber scantling cleans sawn and fixed complete all as specified and as directed .

Description all as per all as per item No 4 here in before but except timber.

Material and labour for Preparing surface of wood and wood based materials, new or old, of any description and girth and treated with creosote oil complete all as specified and as directed.

Supply and fix in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in ridge , valley gutter fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix in repairs Rolled Mild steel in roof trusses (Framed) trussed purlins, rafters, struts (beam, tee, angle channel or flat sections ) including distance pieces, cleats etc. conforming to grade Fe 410-W Gde E - 250 quality 'A' complete all as specified and as directed

Supply and fix in repairs Mild steel framed work such as grills, gratings etc. With ends of bar shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed labusters, walk ways, railings, framewok of water tanks and similar work conforming to FE 290. Gde-E-165complete all as specified and as directed.

Supply and fix Mild Steel work as in wind ties etc. for roof including securing bolts and cutting tops to shape as directed ,drilling holes ,notching for wire etc conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

Material and labour for Providing cement concrete 1:3:6 type C1 (Using 20mm graded aggregate ) as in coping/bed plates eves filling in roof including necessary steel form work complete all as specified and as directed .

Dismantling boarding of any description fixed in any position with nails and taken as credit complete all as specified and asdirected.

Supply and fix Aluminium composit panel board 4mm thick fixed over existing wooden/steel frames with necessary frame work with screwing and scaffolding including dismantling of old unserviceable board of any description and taken as credit complete all as specified and as directed.

Material and labour for Prelaminated Particle Board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws as in cub board shelves/ cabinet works including removal of old unserviceable wooden board of any description and taken as credit complete all as specified and as directed Note : Make of particle board : Swastik/Kitply/M/S Green Ply Industries Ltd

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer. complete all as specified and as directed.

Taking down eaves gutter pipes,rain water pipes (of any size , pattern and in any position ) including fittings,head shoes,bends,swan neck etc and taken as credit complete all as specified and as directed

Supply and fix PVC (SWR) eaves gutter Half Square /Trapezoidal shape of150mm dia complete all as specified and as directed . Note : Make of PVC eaves gutter : Finolex/Supreme/Prince

Demolition and breaking up drain pipes (Salt glazed ware,AC or Reinfoced concrete ) set in cement mortar and removal of debris off the premises complete all as specifiedd and as directed.

Supply and fix in repairs 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Note : Make of PVC Pipe : Finolex/Supreme/Prince

Supply and fix 110mm bore UPVC (SWR) bends any radius with access door complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince .

Dismantling wall or ceiling boards or insulation boards/ slabs any thickness including cover fillets and taken as credit complete all as specified and asdirected

Supply and fix 4mm thick High Pressure Steam Cured (HPSC) non asbestos fibre cement building board in false ceiling with aluminium anodized snap grids of 60x60cm with Tee section 35x25x1.25mm, angle section 25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying two coats of oil bound distemper on ceiling including dismantling of existing unserviceable false ceiling boards of any description and size alongwith snap grid frame works including making good disturbed wall/ ceiling surfaces and taken as credit complete all as specified and as directed. .Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Material and labour for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6 including demolition of existing old pre-cast concrete articles and precast concrete block walling of any description and removal of rubbish off the premises complete all as specified and as directed

Taking down cement plaster or cement lime plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Material and labour for Rendering 15 mm thick in cement mortar 1:6 on fair faces of PCC block masonry or concrete surfaces ,finished even and smooth without using extra cement, complete all as specified and as directed

Material and labour for Rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of PCC block masonry or concrete surfaces ,finished even and smooth without using extra cement, complete all as specified and as directed Note: Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound . Note : Make :Impermo/Roff/Cico

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper (Acrylic distemper washable) over a coat of alkali resistent primer over 1mm thick layer of wall care putty complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of walls and applying .two coats of exterior emulsion paint over a coat of water based primer complete all as specified and as directed.Note :Make of exterior emulsion paint : Asian Paints (Brand : APEX)

Material and labour for Complete removal of existing treatment on wall with wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots etc and applying two coats of Oil Bound Distemper over a coat of primer and a layer of 1 mm thick wall care puty complete all as specified and as directed .

Material and labour for Complete removal of old plastered/unplasterd surfaces of wall and brooming down and appyling two coat of exterior emulsion paint over water based primer complete all as specified and as directed .Note :Make of exterior emulsion paint : : Asian Paints (Brand : APEX)

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thick (below or above GL) complete all as specified and as directed. complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base for flooring as in level course including necessary form work complete all as specified and as directed.

Material and labour for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of Vitrified ceramic tile : HR Johnson/Kajaria/Somany .

Description all as per item No 36 here in before but cut to suitable size in skirting/dado over and including rendering 10 mm thick in CM 1:4 on stone masonry walls as in backing coat of skirting, dado etc complete all as specified and as directed..

Material and labour for Premium quality non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match shade with joint free non skid tiles over screed bed as bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 completeall as specified and as directed. Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Premium quality glazed ceramic tiles coloured of size 350x250x7 mm /450x300x7 mm thick over vertical surfaces such as skirting , dado etc , set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including rendering 10 mm thick in CM 1:4 on stone masonry walls as in backing coat of skirting, dado etc complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Naveen

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid dry and rubbish off the premises complete all as specified and as directed.

Material and labour for Granite slab 20mm thick (table rubbed and polished) machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing in steps,jambs,pillars, window cills ,cooking platforms /wash basin platforms etc complete over screed bed or bedding layer of mortar 15 mm thick for laying of granite slab in CM 1:4. complete all as specified and as directed.

Material and labour for Machine cut granite slab in dado or skirting ,steps ,risers ,cladding to pillars etc 20mm thick (table rubbed and polished) laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing and 10mm thick in cm 1 :3 on fair faces of brick work or concrete surfaces as in backing coat of skirting, dado etc, complete all as specified and as directed .

Material and labour for 100mm thick PCC(1:2:4) type B1,(using 20mm graded stone aggregate) as in floor and surface finished even and smooth with using extra cement including necessary steel form work complete all as specified and as directed.

Material and labour for PCC 1:4:8 type B2, (using 40 mm graded stone aggregate ) 50 mm thick as in sub base levelling course and finishing the surfaces even and fair without using extra cement including necessary steel form work complete all as specified and as directed.

Material and labour for Rubber coated chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, with grey cement and pigments with GLOSSY FINISH set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking colour paver block of 55 to 60mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 , with grey cement and pigment ,M-35 grade complete all as specified and as directed.

Material and labour for 50mm thick sand cushion under interlocking paver blocks including watering and consolidation complete all as specified and as directed. Note : Consolidated thickness shall be measured for payment.

Material and labour for PCC 1:3:6 ,type C2( using 40mm graded stone aggregate) 75mm thick as in plinth protection / paving including necessary form work complete all as specified and as directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) of area exceeding 1.5 Sqm but not exceeding 4.0 Sqm each and taken as credit complete all as specified and as directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) of area not exceeding 1.50 Sqm each and taken as credit complete all as specified and as directed.

Material and labour for Aluminium sliding windows /ventilators (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm, including provision of 4mm sheet glass ordinary quality for panels and provision of all hardware fittings such as handles, locking arrangements, rubber gaskets, rollers, spring catchers etc.complete all as specified and as directed.

Notes: (i) The rate quoted shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (ii) Make of Glass : :Saint Gobain/Modi Guard/ Gold Fish (iii) Make of Aluminium section : Jindal/Hindalco/Indal (v) Minimum thickness of anodisation shall be of 15 Microns

Material and labour for 2nd class hard wood chowkhat or frames, plain, solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints, fixed in position .complete all as specified and as directed

Material and labour for Factory made 35 mm thick Second class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 09 mm thick commercial plywood BWP or 12 mm thick veneered particle board with commercial veneers on both faces . The size of rail and stile as per IS :1003 (Part I) ,Kiln seasoned and chemically pressure treated complete all as specified and as directed.

Material and labour for Factory made 35 mm thick 2nd class hard wood glazed/ gauged shutters, open rebated and prepared to receive glass, gauze, etc. (divided into square with plain, chamfered or rounded, mitred and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Description Aal as item No 54 here in before but window,ventilator etc are provided with stiles and rails as specified in SSR Part-I section 8 clause 8.24(b).

Material and labour for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on both sides reinforced with M.S. Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Material and labour for Factory made Solid Panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed

Material and labour for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. complete all as specified and as directed.

Material and labour for Preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and as directed.

Supply and fix stainless steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm fixed with tinned tack or galvanised wire stapples complete all as specified and as directed.

Supply and fix in repair stainless steel steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm fixed with tinned tack or galvanised wire stapples complete all as specified and as directed.

Supply and fix Mild steel butt hinges 100 mm in size, medium weight, cold rolled complete all as specified and asdirected . (ISI MARKED)

Supply and fix Mild steel butt hinges 75 mm in size, medium weight, cold rolled complete all as specified and asdirected . (ISI MARKED)

Supply and fix in repairs 300mm long Mild steel helical door spring, ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/ steel chowkats complete all as specified and as directed. (ISI MARKED)

Supply and fix 100mm long extruded section aluminium alloy anodised handles fabricated type complete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix 150mm long extruded section aluminium alloy anodised handles fabricated type complete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix Aluminium anodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and all as directed. Make :Crown/Classic/Adarsh

Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.

Material and labour for 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed.Note :Make of Glass :saint Gobain/Modi Guard/Gold Fish

Material and labour for 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and as directed.Note :Make of Glass :saint Gobain/Modi Guard/Gold Fish

Taking up or down steel tubing and connections 15mm dia bore of pipe and taken as credit complete all as specified and as directed.

Description all as per item no :73 here in before but 20 mm dia bore .

Supply and fix Unplasticised PVC pipes of 15mm dia., pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.Note :Make of UPVC Pipe :Finolex/Supreme/Prince

Description all as per item No 75 here in before but 20mm dia bore of pipe.

Supply and fix in repair Harrison curtain rails, mild steel chromium plated with fixing brackets, stops and rollers etc as approved by GE complete all as specified and as directed. (ISI MARKED)

Supply and fix in repairs Brass Knob of 35 to 40mm dia for curtain rods complete. complete all as specified and as directed..(ISI MARKED)

Supply and fix Mild steel Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks(stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165. complete all as specified and as directed.

Supply and fix in repairs Pedestal type wash basin Vitreous China of size 550 x 400mm ,white including CI brackets , with PVC waste pipe and waste fittings including cutting for and pinning in ends of brackets or erecting stand . complete all as specified and as directed.

Supply and fix Chromium plated Pillar taps fancy type , cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make: Cera, JAQUAR, Johnson/ ESS ESS/ ARK.

Supply and fix PVC connections 15 mm size with PTMT nuts 600mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix in repairs Tubular towel rail 20mm dia brass chromium plated D type 60cm long between flanges complete all as specified and as directed.(ISI MARKED)

Supply and fix in repair 15mm dia Stop valve fancy type chromium plated with long shank and cup (concealed type) screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed Note : Make : Metro/GEM/ESS ESS

Supply and fix PVC (SWR) floor trap 75mm dia outlet ,plain with grating including jointing with solvent cement . complete all as specified and as directed . Make : Finolex/Supreme/Prince

Supply and fix in repair Vitreous china water closet, Pedestal type, white, including 32 mm dia PVC flush pipe, white seat cover etc and connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipes etc.complete all as specified and as directed.

Supply and fix Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe including brackets and connections to pipe .complete all as specified and as directed. Note : Make :Parryware (Slim Line ) /CERA/ Hindware

Supply and fix Grating of 150mmSize of PTMT (Minimum weight :100 gms)complete all as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Material and labour for Two way bib taps, brass, chromium plated, fancy type, long body, screwed down, screwed for 15mm bore iron pipes or brass ferrule, fixed in repairs complete all as specified and as directed.Make : Metro/Waterman /ESS ESS

Material and labour for Health faucet, CP, with 1 metre flexible tube with wall hook, fixed in repairs complete all as specified and as directed. Make: Cat No. 563 of JAQUAR or equivalent model in Cera/ Johnson

Supply and fix in repairs brass, chromium plated toilet paper holder fixed to wall with chromium plated brass screws complete all as specified and as directed . Make : Cat No.ACN 1151N of JAQUAR or equivalent model in Cera/ Johnson

Supply and fix Brass chromium plated overhead shower with shower arm flange, with swivel joints, any size, fixed to 15mm bore steel pipe, fixed in repairs completeall as specified and as directed. Note :Make : Hindware Overhead Shower With Shower Arm & Wall Flange(Project) - F160039

Supply and fix Corner glass shelf, 5mm thick, 9" wide, fixed with suitable mild steel CP brackets, nuts & bolts, fixed in repairs complete all as specified and as directed. Make: Jaguar /Cera/ Johnson

Supply and fix in repairs Soap dish, vitreous china , white of size 160mmx160mmx 90 mm fixed with plugs with chromium plated brass screws (for Baths of 3 cubical in each toilets) completeall as specified and as directed..Note :Make: Jaguar /Hindware/Marc.

Supply and fix in repairs 15 mm bore Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed Make: JAGUAR or equivalent model inCera/ Johnson

Supply and fix in repair kitchen sinks of stainless steel 1mm thick with drainage board with plugs,washers and wastes;including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm X 330mm X 160mm complete all as specified.Note :Make :Nirali/Joyna/Commander

Dismantling water tanks of any description , capacity exc 500 litresand n exc 1000 litres including connections. and taken as credit complete all as specified and as directed

Supply and fix Rotational moulded Polyethylene water storage tank of capacity 1000 litres(cylinderical vertical with closed top ) double layered hoisted and fixed in position with and including Ball valve of 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight : 210 gms) complete all as specified and as directed . Note :(i)Make of PVC water tank :Sintex/Polycon/Infra(ii)Make of PTMT ball valve : Prayag /M/S Shakthi Industries

Supply and fix in repairs Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white with integral foot rest including 'P' or 'S' trap etc.including provision of lime concrete bedding .complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings including ridges and removal of debris off the premises and old asbestos cement sheet with ridges of any description and taken as credit .complete all as specified and as directed.

Material and labour for applying two coats of 100 % premium acrylic emulsion paint having VOC less than 50 gm/litre and uv resistance as per IS 15489:2004, alkali & fungal resisatance , dirt resistance , exterior paint of required shade (Company depo tinted ) with silicon additive @1.43 Litres /10 sqm over and including priming coat of exterior primer applied @ 0.90 Litres /10 sqm over newly plastered surface complete all as specified and as directed.

Material and labour for Grinding and polishing of tandoor stone/Kota Stone/ Terrezo tiles of required finish with necessary machineries and tools etc complete all as specified and as directed.

Supply and fix in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed with tinned tack or stainless wire staples complete all as specified and as directed.

Material and labour for Preparing old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as sepecified and as directed.

Material and labour for Preparation of RCC roof slab by removing dust, dirt and applying oil bound bituminous primer at 0.2kg per Sqm over provide APP modified water proofing membrane weight not less than 4kg/Sqm reinforced with non oven polyster mat weight not less than 160gms per Sqm incl minimum 10cm side/over lap and including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm over on drying apply a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm complete all as specified and as directed .

Material and labour for Rendering 10mm thick on concrete surfaces in CM 1:3 with water proofing compound and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. Note : water proofing coumpund shall be measuerd separately

Disconnecting existing tanks exc 250 ltr and n exc 500 ltr, setting aside (or lowering if required) for repairs,cleaning etc and hoisting if required. Reconnecting and re-fixing in position (cleaning and repairing etc shall be measured separately) complete all as specified and as directed.

Re-fixing old UPVC/GI tubing 15mm bore in new or old position (wall, ceiling and floor etc) with necessary new fittings complete all as specified and as directed.

Description all as per item no :109 here in before but 20 mm dia bore

Taking down carefully old unserviceable sub main wiring of Aluminium conductor cable of sizez 2.5 and 4 sq.mm and taken as credit complete all as specified and as directed.

Material and labour for Point wiring with FRLSH PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area for phase and neutral in and including PVC CASING CAPPING of suitable size ISI marked with all accessories in wiring system and provision of 1.5 sqmm green colour FRLSH PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm connected to common earth dolly including provision of suitable size of modular metal box fixing in wall with white colour cover plates and all accessories for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controled by one 1 way switch including taking down old unserviceable point wiring of any description from existing surfaces and taken as credit complete all as specified and as directed.NOTE: (i) Make of PVC cable :Finolex/Polycab/ Havells (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

Description all as per in item No. 112 here in before but for one fan / Exhaust point controlled by one switch and regulator.

Description all as per in item No. 112 here in before butOne call bell point controlled by bell push

Description all as per in item No. 112 here in before but one 3 pin socket outlet, for independent socket 5 Amps point.

Description all as per in item No. 112 here in before but for one 05 Amps socket outlet on the same board with other switches.

Description all as per in item No. 112 here in before but wiring with 2.5 Sqmm FRLSH PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductorFRLSH PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Supply and fix Modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/Cona

Supply and fix Modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/Cona

Supply and fix Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/Cona

Supply and fix Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed . Make -Anchor (Roma)/Legrand/Cona

Supply and fix Modular fan regulator 120 Watt -2 Module 230 V, step type complete all as specified and as directed. Make -Anchor (Roma)/Rider

Supply and fix in repair Modular bell push flush type 6 Amps 1 module 230 Volts AC complete all as specified and as directed. Make -Anchor (Roma)/Legrand/Cona

Supply and fix Call bell ding dong AC 230 volts, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/Cona

Supply and fix in repairs or replacement of ceiling rose 3 terminal suitable for 230 volts AC supply, complete all as specified and as directed. Make -Anchor (Roma)/Legrand/Cona

Material and labour for Sub main wiring with 2 runs of single core FRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 6 Sq mm drawn through and including PVC casing and capping of suitable size with all necessary fittings and provision of one run of single core FRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 6 Sq mm for earth continuity and connected to common earth dolly ,complete all as specified and as directed. Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii)02 run of 6.0 sqmm and 01 run of 6.0 sqmm including 01 run of PVC casing and capping will be measured as one length (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells. (v) Make of PVC casing /capping :Avon plast/Presto plast /Garware

Supply and fix in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed . Make : Philips cat part no : RC370B LED30S-6500 or Equivalent price and specification in M/S Wipro/CG

Supply and fix in repair Round shaped LED lamp 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed . Make: Philips cat part no Sleek Surface SM251CW: or Equivalent price and specification in M/S Wipro/CG

Supply and fix in repair LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed .Note : Note : .Make: Philips cat part no :BN 021C LED20S PSU CDL or Equivalent price and specification in M/S Wipro/CG

Supply and fix in repair LED INTEGRATED BATTEN T5 tube light fitting type 1x 9/10 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed .Note : Make : Philips , M/S Wipro/CG

Supply and fix ceiling fans complete with blades, down rods of suitable length of 20 mm dia medium grade GI pipe from top to bottom, and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush direct current motor (BLDC) and taking down existing unserviceable ceiling fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and as directed . Note : (i) Make:-Bajaj /Crompton/Orient (ii) Old ceiling fan will be deposited in MES store yard

Supply and fix Exhaust fan made out of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm ,heavy duty with necessary grouting and fixing arrangements and provision of 3 core flexible FRLSH PVC copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed . Note :Make of exhaust fan : Almonard/Khaitan/Bajaj

Supply and fix LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed..Note : Note : Make :Philips BRP020 LED HP/CW 240V 25Wequivalent price and specification of M/S Wipro/CG

Taking down old and US MCCB DBs/MCB DB including MCB/MCCB/Isolaters all as specified and directed by Engr-in-Charge.

Supply and fix Factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.00 mm thick CRCA sheet and fixed flush on wall on sunmica board and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified and as directed. . Make: Siemen /Legrand/ABB

Supply and fix MCCB , 4 pole ,100 Amps , 16KA 50HZ AC supply current rating conforming to IEC-609472 & IS-139473 including dismantling old one and taken as credit complete all as specified and as directed.. . Make: Siemen /Legrand/ABB

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.00mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified and as directed. . Make: Siemen /Legrand/ABB

Supply and fix Miniature circuit breaker (MCB) of SPN 40 to 63 AMP 240V, 10KA 'C' curve following poles including dismantling old one and taken as credit complete all as specified and as directed.. . Make: Legrand/ Indo Asian /ABB

Supply and fix MCB SP 240 Volt capacity 5 to 32 Amps‘C’ curve, complete all as specified and as directed. Make: Legrand/ Indo Asian /ABB

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core including lugs,thimbles and ferrules etc laid in trenches ,fixed to wall ,floor etc complete all as specified and as directed.Make : Gloster/Poly cab/CCI

Excavation in trenches n exc 1.5m wide and n.exc 1.5m depth for laying of cables/ GI tubes etc and getting out in any type of Soil complete all as specified and as directed.

Material and labour for Double wall corrugated High Density Polymer Ethyl pipe(SDR 17) of ISI marked 63 mm outer dia including necessary fittings like couplers,bends,end caps etc as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc.complete all as specified and as directed. Make : Ketron/Rex/Duraline

Returning, filling in excavated soil including spreading levelling and well ramming in layers n exc 25cm thick .complete all as specified and as directed.

Removing excavated material/surplus soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point .complete all as specified and as directed.

Supply and lay 40 mm bore Galvanized iron pipe , “Light grade”, including all fittings and fixed on pole/walls/in road etc for cable protection complete all as specified and as directed. Make : TATA/JINDAL/Prakash surya

N K CONSTRUCTION

M/S SAMARTH CONSTRUCTIONS

SAGAR ENTERPRISES

M/s B C CHOUGULE

M/S VISHWAROOP ELECTRONICS AND ELECTRICALS

DHANSHRI ENTERPRISES

M/S MAHADEV M PATIL

ASHOK M RAJGOLKAR

M/s. J P CONSTRUCTIONS

Vinod Enterprises