E-Quotation for the work of Interior Development of JNPA Guest House at Mistry Court, Mumbai

Amount

CIVIL & FLOORING WORK

Providing and constructing 720mm wide Granite platform for toilet,wash basin counter as per Architects details. Vertical and Horizontal supports of kadappa stone with granite top and 75mm granite fascia as per architect detailed drawing and design including making provision for and fixing wash hand basin etc. complete with finishing/moulding & polishing .

Providing and Laying `India Waterproofing’ or other approved equivalent waterproof treatment by way of providing waterproof plaster backing on walls of Toilets, all as per specifications.

CARPENTRY WORK

Making Door Frame : Providing and fixing 1st quality Burma T.W. door frame of size 75 x 150mm with required groove and chamfer including M.S.hold-fast of size and make. as per architect's detailed drg. And design and as instructed by the Engineer-in-charge.

Crockery Unit : Providing and Making wooden laminated finish Crockery unit to Open shelves, 38mm Dia SS rode to hang cloths and openable shutters on auto closed hinges and having Brass ornamental handles as per the detailed drawing and design by Architect.

MDF Decorative Panelling : Providing and fixing MDF panelling, frame work as per requirement to be Fixed on wall/masonry/column with necessary fixing details to attain the reqd level of the surface, stability & rigidity. framework to be covered using MDF as per design. Finished with Paint. Rate inclusive of necessary Cutouts for switches /lights & other fixtures.

Providing and fixing TV unit made out of Top ,sides,Drawer Facia, etc. in 18mm thk. Marine plywood. Finishes - All the external surfaces to be finished with 1.0mm thk. Laminate and internal surfaces to be finished with 0.8mm thk. laminate of approved shade.Hardware- All necessary hardware for knockdown fitting like Minifix , wooden dowels, Sunk screw,connector, L' Clip, Leveling Bolt with inserts, etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Marine Plywood - Merino/GreenPly/Anchor or equivalent. Laminate - Merino/Greenlam/Century or equivalent. Hardware - Hettich/Hafele/ebco or equivalent. Edgeband - Rehau/Dolken or equivalent.,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Decorative Partition - Providing and fixing Decorative Glass Partition, frame work as per requirement to be Fixed on wall/masonry/column with necessary fixing details to attain the reqd level of the surface, stability & rigidity. framework to be using Teakwood & Glass as per design. Finished with Melamine polish.

Study Table : Providing and fixing study table made out of 25mm thick Mariane plywood with drawer units on one side of table upto height of 2'6" with Laminate.

Vinyl Wood Flooring : Providing and laying at site 4mm thick Vinyl Wood flooring.

Providing and fixing Dresser Unit : Providing and fixing Dresser Unit made out of Top ,sides,etc. made out of 18mm thk. Marine plywood to be providing in dwg. & 6mm thk. mirror on 18mm thk. Shutter.Finishes - All the external surfaces to be finished with 1.0mm thk. Laminate and internal surfaces to be finished with 0.8mm thk. laminate of approved shade.Hardware- All necessary hardware for knockdown fitting like Minifix , wooden dowels, connector, L' Clip, Leveling Bolt with inserts, etc. complete as per Architect's Drawing and instructions of The Engineer In Charge.

DOORS & WINDOW

Safety Door :Providing & Fixing Safety Door Shutters in Both side Laminate finish : with Complete Hardware at require location and having height more than 1:5 meter made by using solid core Mariane type flush door 35 mm thick of the requisite manufacuture viz.Anchor / Century / Kenwood / Duro or equivalent generally confirming to I.S.710 -termite treatment to plywood and wood work with ten years guarantee bond etc. Including all leads & lifts etc. Complete necessary lipping (BTC) mounding, hardware, locks handle’s, Safety Grill, etc.as per Architectrual drawing to be approved and directed by engineer incharge.

PLUMBING WORK

Providing & Fixing of Zolotu Ball Valve 15/20/25mm Dia

Providing & Fixing of Zolotu Ball Valve 40/50mm Dia

Providing and Fixing Geyser 3 ltr.

Disconnect Existing Toilet & Pantry with Fitting, Existing Pipe etc.

BOUGHT-OUTS

Round Side Table - 540mm Dia

Round Side Table - 820mm Dia with marble top

Dining Table 8 Seating : providing & Fixing 8 Seating dinign table as per detailed design frame work with top base in marine plywood finished with surface as per architect drawing etc.

Rugs : Providing & fixing Hand Made Saggy 3D Carpet made up polyester Yarn. complete as approved by the Engineer in charge etc. all complete.

Providing MATTRESS 200mm thick (8"). Double bed complete foam which would be temperature friendly , superior drying , inbuilt protection against bacteria and suite of approved colour and brand , as per design, specification and drawing etc. complete.

Planter Box : Supply and fixing of heavy duty thick coloured Fibre indoor planters for keeping indoor earthen pots with bevelled top edge.

Providing Bedsheet of approved colour and brand , as per design , specification etc.complete .

HVAC WORK

High Side Work

SUPPLY OF HI-WALL SPLIT AC 3 STAR INVERTER

Supply of split type air conditioning units,each comprising of an outdoor and indoor unit/s.Condensing units complete with Scroll/Reciprocating/Rotary Compressor/s, with aluminium fins, thermostatic expansion valve and air cooled condenser with fan. Evaporating unit consist of a fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep cooling coil of copper tubes and aluminium fins etc.

1.5 TR - HI-WALL SPLIT AC

2.0 TR - HI-WALL SPLIT AC

Low Side Work

Installation of indoor Hi Wall Unit with Outdoor units.

Refrigerant Copper Piping

Supply, Installation of copper refrigerant piping with insulation, Including supports for copper pipes such as angles, tray, rods, etc.

SITC of control cabling for Indoor to outdoor unit with conduit pipe & accessories.

SITC of power cable 3c x 2.5 sqmm cu flexible cable with conduit pipe & accessories

Supply, Installation & Testing of Insulated Hard PVC drain Piping with 9 mm Tubular Insulation with supporting clamps.

25mm dia

32mm Dia

Drain pump

Supply and Installation of Frame Work-Readymade stand for Hi Wall ODU.

Pressure Testing, Nitrogen flushing, gas charging, & commissioning testing of the hi wall unit

Ventilation Fan - In-line Fan cabinet / circular type

Supply, installation, testing, and commissioning of in-line fans comprising of Class I construction complete with TEFC induction motor

150 /10mm SP - EXHASUT AIR FAN

400 CFM /20mm SP - EXHASUT AIR FAN for kitchen

GI Sheet Metal Duct or PVC Pipe

Supply, installation of sheet metal RECTANGULAR DUCTS complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts & nuts, etc.

24 gauge (0.60mm) for Fans Connection

PVC Pipe 150mm Dia with all fittings, Elbows, Tee, Reducer etc,.

PVC Pipe 100mm Dia with all fittings, Elbows, Tee, Reducer etc,.

Flexible Canvas Connection

Supply /installation / testing and commissioning of fire rated flexible canvass fan outlet connections with suitable flanges on both the faces.

Flexible duct

Supply, installation of noninsulated flexible duct with supporting arrangements.

100mm dia

Exhaust Air Grille/Disc Valve

Supply, installation of aluminium powder coated exhasut air Disc valve of 100mm Dia

Supply & Installation of GI Exhaust air & Fresh air louver with bird screen & Cowl piece.

Providing & Fixing of EXHAUST HOOD ABOVE COOKING COUNTER as per Site Rtequirment or as per Direction by EngineerIn Charge.

Transportation Charges & Lifting, Shifting of indoor & outdoor units

Dismentalling of existing AC unit including all fitting (Pipe, clip, bracket etc.)

ELECTRICAL WORK

Earthing Work

Supply and installation of earth busbar box consisting of 2 x 50 x 6 mm, 300mm long GI. Strip with multiple tapping and nut bolt arrangements etc. mounted on SMC insulators. Box shall be fabricated from M.S. sheet including powder coated, clear acrylic hinged door etc. complete.

Distribution Board

Supply, installation, testing, tagging, (Circuit numbering) and commissioning of following double door readymade recessed type MCB, DB, fabricated out of CRCA sheet and painted with powder coating process OR made out of scratch proof polycarbonate body and concealed in wall, or on surface or on steel column with necessary mounting frame complete as required along with gland covers at both ends (IP42 min) Si RCCB - Indicates RCCB with enhanced immunity to unwanted tripping under harmonics presence.

12 Way TPN Per Phase Isolaton DB with 63A FP MCB as incomer, 3no. 63A DP MCB, 30mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD

12 Way SPN DB with 25A DP RCCB as 30mA incomer, and 6A-32A SP MCB 10no. as outgoing as per SLD.

Supplying, installing, testing and commissioning of a consisting of modular , 2 Nos of 6A 5-pin sockets and 1no 16A SP switch along with front plate.

Supplying, installing, testing and commissioning of a consisting of modular , 1 Nos of 6A 5-pin sockets and 1no 6A SP switch along with front plate.

Supplying, installing, testing and commissioning of a consisting of modular , 1Nos of 16A 5-pin sockets and 1no 16A SP switch along with front plate.

Supply, fixing, testing, of good quality industrial sockets with MCB's or MCB isolators of different ratings in readymade IP 42/44 Polycabonate unbreakable enclosure. Box should be suitable to terminate cables / wires easily, complete as required.

32 A DP MCB in a Readymade enclosure with cable end box for incoming & outgoing cable.

Cables

Supply, testing, tagging, laying and commissioning following sizes of 1100 Volt grade, XLPE / PVC insulated multistrand Al. / Cu. Conductor armoured / unarmoured cables (As Per IS 1554 & IS 7098) in readymade RCC trench, in PVC pipe, full round RCC pipe hume pipe, on cable trays / ladders etc. as. required complete with clamps for fixing tagging etc.

3C x 10sq.mm. 2XWY FRLS cable.

3C x 4.0 sq.mm. 2XWY FRLS cable.

1C x 16 sq.mm. 2XY FRLS cable (UnArm.)

1C x 6 sq.mm. 2XY FRLS cable (UnArm.)

End termination for above cables including glands Brass heavy duty, lugs, consumable etc. (End terminations for flexible cables will not be considered separately).

3C x 10sq.mm. 2XWY FRLS cable.

3C x 4.0 sq.mm. 2XWY FRLS cable.

1C x 16 sq.mm. 2XY FRLS cable (UnArm.)

1C x 6 sq.mm. 2XY FRLS cable (UnArm.)

POINT WIRING, FIXTURES

Surface / concealed point wiring for light / fan / call bell / 6A points with 2 x 1.5 + 1 x 1.5 Sq.mm. wires with 25MM PVC Conduit for each point complete with necessary modular switch, socket board, switch plates & accessories complete with testing. Note: All conduits in area with false ceiling shall be concealed in wall below false ceiing. (For concealed conduiting area)

Point wiring as above for Primary light points with necessary 6A SP switch, ceiling rose / Holders compete. (Point Length will be Avg. 6Mtrs for first point from Switch Board .)

Point wiring as above for secondary light point looped from the primary light point with necessary ceiling rose / Holders compete. (Point Length will be Avg. 3Mtrs from first point to second point .)

Point wiring as above for 2 way Light Point controlled by two 6A SP Switch,ceiling rose / Holders complete.(Point Length will be Avg. 6 Mtrs for first point from Switch Board .)

SITC of conceled/above false ceiling Wall Fan Point with 2X1.5 sq. mm + 1X1.5 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch & 6A Socket in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .

SITC of conceled/above false ceiling Ceiling Fan Point with 2X1.5 sq. mm + 1X1.5 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch & 5 Step Fan Speed Regulator in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .

SITC of conceled/above false ceiling 2 Way Ceiling Fan Point with 2X1.5 sq. mm + 1X1.5 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch & 5 Step Fan Speed Regulator in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .

SITC of conceled/above false ceiling Bell Point with 2X1.5 sq. mm + 1X1.5 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .

SITC of conceled/above false ceiling Exhaust Fan Point with 2X1.5 sq. mm + 1X1.5 sq. mm FRLS PVC Wiring in pvc Conduit (of ISI Make) along withModular 6A Switch in modular box with all other required accessories, Fan Box, Junction Boxes etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) Wall chasing & reinstatement must be of pipes. .

SITC of conceled/above false ceiling Foot Lamp Point with 2X1.5 sq. mm + 1X1.5 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .

SITC of conceled/above false ceiling Insect Catcher Point with 2X1.5 sq. mm + 1X1 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .

Supply & Installation of mains/submains 2 x 1.5 + 1 x 1.5 sq.mm. Cu. multistrand FRLS Cu. wires 1100 V gr. in dia. 25mm PVC conduits complete.

Supply & Installation of mains/submains 2 x 2.5 + 1 x 1.5 sq.mm. Cu. multistrand FRLS Cu. wires 1100 V gr. in dia. 25mm PVC conduits complete.

Supply & Installation of mains/ submains2 x 4.0 + 1 x 2.5 sq.mm. Cu. multistrand FRLS Cu. wires 1100 V gr. in dia. 25mm PVC conduits complete.

Supply & Installation of GI ERW conduit with accessories of following sizes with spacer saddles for open or in slab.

32 mm dia , PVC Conduit

25 mm dia , PVC Conduit

Supply,Installation, testing & commissioning of lighting fixtures supplied by vendor with required with suitable control gear, electronic control gear for fluorescent) material including necessary accessories, wiring connection, junction boxes, chain, down drops, supports etc. Scope also includes assembling of trunking fixture or any other type of fixture. Note- Unloading & storage of fixtures are including in scope. The wattage of fixture subject to vary as per lighting vendor design. However, the item for installation will not change. The areas are mentioned in the drawing where the fixtures are to be installed in the individual items. Refer layout for the type of fixture on drawing shared. Relate the drawing with ealier floors and quote accordingly. Any descripancy in consideration please highlight during quoting only.

12 watt COB Down light

12W Recess mounted LED downlighter

9W Recess mounted LED downlighter (IP 65)

6W spot LED downlighter

LED Strips for cove light with 25W Driver

Ding Dong Bell

Decorative Hanging Light

SITC of Supplying and erecting Insect Catcher

Supply & installation Foot Lamp with Modular Box

Supply & installation Table Lamp

Supply & installation Floor Mounted Decorative light

Bedside Lamp

Supply, installation, testing & commissioning of 1200 mm sweep ceiling fan & 600-1000 mm down rod with canopies.

Supply, installation, testing & commissioning of 250mm exhaust fan with frame & bird protection louvers including all hardware etc. complete as required.

UPS System

Supply,Installation, testing & commissioning of 3Phase Input & 3Phase Output UPS with 30 minutes Battery back up and sealed maintenance free lead acid maintained in battery racks complete with interconnections, Cu battery cables, Battery breakers. The rack shall be sturdy M.S. section fabricated with powder coating The scope shall include terminals & busbar shrouding for Battery terminals & connections. (Note:- Battery store shall start 150mm above FFL.) NOTE: The UPS configuration is as per SLD. The UPS shall be able to sycnhornised as mentioned in SLD. It shall be with galvanic isolation.

1 No. x 6kVA UPS arrangement as per given specifications and details.

Supply, Installation of Sealed maintenance free valve regulated lead acid (VRLA) Battery (with reverse polarity protection MCCB) as per specifications complete suitable for following UPS sizes (Bidder should furnish the battery calculations for 30 minutes backup along with the BOQ). Note: The scope also includes complete SITC of cables, DCDBs, DC MCBs, required for battery interconnection as well as interconnections betwwen batteries and UPS with required all accessories.

6 KVA UPS (30 minutes).

Installation of battery rack floor mounting as per specifications with necessary fabrication complete for following sizes.

6 KVA UPS (30 minutes).

Fire Extinguisher

ABC type of Fire extinguisher of 6 Kg cap. complete ready for use as per IS 2171 having Mark Seasfire

Co2 type of Fire extinguisher of 4.5 Kg cap. complete ready for use as per IS 2171 having ISI Mark /Seasfire

Dismentalling of existing Light fixture, cable including all.

NETWORKING & TELEPHONE SYSTEM

Supply,installation, laying and commissioning Cat 6 UTP cable with accessories i.e.conduit pipe, clamp etc.Complete

Supply, Installation testing and commissioning RJ-45 Cat-6 Information Outlet with face plate with accessories i.e.conduit pipe,clamp etc.

Supply,installation, laying and commissioning Cat 6 UTP cable with accessories i.e.conduit pipe,clamp etc. Complete

Supply, Installation testing and commissioning RJ-11 Information Outlet with face plate

Supply, Installation testing and commissioning Cat-6 Patch cord 2 meter at user end

Supply, Installation testing, jumpering and commissioning 100 +100 Pair MDF Box with krone module

Supply, Installation testing and commissioning 50 Pair riser Cable with termination,punching & jumpering of telephone cable

Supply, Installation testing and commissioning 12U Wall Mount Rack.

Supply, Laying, termination & Commissioning of RG-6 TV CABLE

Supply, Installation, Termination & Commissioning of TV socket termination box with blank PVC cover plate and GI Box .

Providing & Fixing 6 Core MM FIBER Cable

Providing & Fixing LIU Loaded

Providing & Fixing Fiber Patch Cord

Supply Installation testing & Commissiong of fiber splicing for camera work (per pair) or as per Direction by Engineer In Charge.

Supply Installation testing & Commissioning of WIFI indoor access point TP LINK Access device EAP245 or Equivalemnt as per Direction by Engineer Incharge.

Supply Installation Testing & Commissioning of Network Switches HP JL828A or Equivalent or as per Direction by Engineer In Charge.

SITC of 50 inch display

Shandar Interior Pvt. Ltd.