8251 SPECIAL REPAIRS TO BLDG No 11 POWD (STAFF OFFRS MESS) AT MINTSD PUNE AND ADDN/ALTN IN BLDG No P-35 (COOK HOUSE AND DINING HALL) AT 641 EME BN UNDER GE SOUTH PUNE

Amount

Removing of old water proofing treatment including screed bed and cleaning the surface of slab with high pressure water jet / wire brushes,removing dust, foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc 500m all as directed by Engr-in-Charge

M&L for applying Asian paints SmartCare Damp proof Ultra, liquid membrane on the roof suface. The application method is as follows:- (NOTE : Work is to be carried out as per manufacturer's instruction for water proofing of roofs) Water proofing Application : (a) In the existing terraces, the substrate must be checked for its soundness, damaged portions & hollow areas must be repaired with Polymer modified mortar. (b) Small cracks 3mm or less should be open out, cleaned & filled with AP smart care Crack Seal & wider cracks should be filled with Polymer modified mortar. All corners and joints of drain pipes, channels etc. must be treated with polymer modified mortar prior to coating application. Ensure that the coating is applied at least 6 inch inside the drain pipe. (c) Rendering 10mm thick in CM (1:3) on roof surface incl WPC as per manufacturer's instructions. (d) Horizontal Slab area: Apply self-priming coat (diluted with water in 3:1 ratio by volume). Allow to dry for at least 3-4 hrs prior to application of subsequent coat. Apply two coats of Dampproof Ultra without dilution to achieve forced coverage of 10 sq ft /lit for all coats put together. (d) For best performance on terraces, ensure that the product is applied on the entire roof including parapet wall to form a continuous blanket.

M&L for Spread separation layer of 200 gsm geo-textile, with overlap of 50 mm in both directions on fully curved waterproofed surface before laying protection screed complete all as specified and as directed.

M&L for Cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey cement and pigment in floors, and cut and polished laid over 20mm thick screed bed in CM (1:6) as per manufacturer’s instruction complete all as specified and as directed.

Dismantling boarding/ceiling of any description, fixed in any position like partition etc with nails including frame work of timber complete all as specified and as directed.

S&F PVC false ceiling consisting of 595 X 595 mm, 5mm thick plain exposed PVC sheet of 600 kg/cum density manufactured by an ISO certified company, used as panel inserted in a frame work made from anodised aluminium T-section of sizes 25X25mm 19 gauge or 1mm thick in square pattern of grid 600X600mm.The minimum frame work supported from the ceiling with 'J' hooks and GI wire/6mm MS rod of required size to maintain proper level etc.The aluminium frame work is supported on side wall with the use of alum 'L' section of 25X25mm angles etc complete all as specified and as directed by engr-in-charege and as approved by GE. (Make :M/s Rajshree/Armstrong/Syntex as approved by GE)

Taking down chowkat with shutter without taking out shutter from the frame not exc 1.5 Sqm complete all as specified and as directed.

Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and not exc 4 Sqm each complete all as specified and as directed.

S & F Aluminium anodised Powder coating of ivory/brown colour frame / shutters for windows/doors/Ventilator with one or more rebates including joining cleat, glazing clips,anodised aluminium snap beading for fixing, screws, anodised aluminium fittings such as peg stays, handle etc complete all as specified and directed.

M&L for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section including glass and stainless steel wire mesh etc complete all as specified and directed. (a) SP 20048 (b) Glazing clips 19352

S&F Aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock , handle,5mm th plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm th laminated particle board as bottom pannel both side laminated) using following sections as given in 'JINDAL' catlogue complete all as specified and as directed. (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed (Make : Hindalco/Indal/Ajit India pvt ltd) (a) Bottom frame 20620 (b) Top frame & vertical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & bottom 20844

S&F floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140mm size overall of ISI mark complete all as specified and as directed.

S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed.

Supply and fix for factory made solid Panel PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded Prelaminated PVC sheet on the front face and 2mm prelaminated colour PVC sheet on back face,with particle board core fixed in frame at site as per specification and drawing including fittings complete all as specified and as directed.

S & F 100 mm butt hinges, excruded aluminium alloy type B-21 with galvanised mild steel ISI markedhinge pin, anodised and fixed with wooden screws complete as specified and directed.

S&F Aluminium anodised 150mm handle cast type, complete as specified and directed.

S&F aluminium anodised barrel tower bolt 150mm legth of excluded section and fixed complete all as specified and as directed.

S&F aluminium alloy sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 300 mm of ISI mark.complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness in floor apron etc laid bedded and pointed in cement mortar complete all as specified and as directed.

Demolation of cement concrete (unreinforced) of any decreiption and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 25 mm thick plain cement concrete type B-1 (1:2:4) ( 20 mm graded stone aggregate ) as in floors complete all as specified and directed.

M&L for granite 16 - 18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but n.exc 0.38Sqm in floor etc set & jointed in neat cement slurry and poited in white or coloured cement to match fixed over and including screed bed or bedding layer 15mm thick in CM 1:6 all as specified and directed.

All as per Sl item No. 26.00 above but on vertical surfaces, over 10 mm thick backcoat in CM (1:4) complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 300mm x 600mm x 7 to 8mm thick of colour and pattern as approved by EIC, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over back coat complete all as specified and as directed.

M&L for plastering/backcoat of 10mm thick in CM 1:4 complete all as specified and directed .

Demolition of stone / block masonry /brick masonsy built in CM complete all as specified and as directed.

M&L for Brick work with Fly ash brick, straight or curved on plan exc 6M Mean radius built in type CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone wall etc. incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10 mm thick in cm 1:3 on fair faces of brick work or concrete surface in ceiling of roof, chhaya and facia etc complete all as specified and as directed

M&L for rendering 15mm thick in CM(1:6) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed.

M&L for 10mm rendering thick in CM (1:4) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), complete all as specified and directed.

M & L for 2mm thick wall care putty on wall complete all as specified and directed.

M & L for 2mm thick wall care putty on ceiling complete all as specified and directed.

Complete removal of existing treatment on walls by scrapping washing rubbing down etc and applying two coats of Exterior emulsion paint over a coat of primer complete all as specified and directed

M&L for Preparation of new plastered surfaces of wall and applying two coats of Exterior emulsion paint over a coat of primer all as specified and directed

M&L for Preparation of old painted surfaces of wall and applying two coats of Plastic emulsion paint complete all as specified and directed

M&L for Preparation of new plastered/putty surfaces of wall and applying two coats of Plastic emulsion paint over a coat of primer all as specified and directed

M&L for Preparation of new plastered/putty surfaces of ceiling and applying two coats of OBD over a coat of primer on ceiling all as specified and directed

M&L for Preparation of old painted surfaces of ceiling and applying two coats of OBD on ceiling all as specified and directed

M&L for Preparation of old steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed.

Dismantling of PVC water tanks of capacity upto 1000 ltr capacity removing to store and all as specified and directed.

Disconnecting existing tanks of Cap exc 1000 ltr but n. exc 2000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in same/ other position completer all as specified and directed.

S&F rotational moulded polyethylene water storage tank of 1000 ltr capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia complete all as specified and as directed.

Cutting chases, pinning in, making good to fancings where required and pointing in cement mortar 1:3 to edges or edges of landings, steps, cills etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10 cm girth in Brick walls complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia complete all as specified and as directed.

S&F in repairs GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and as directed.

M & L for GI tubing 20 mm dia medium grade with all fitting & fixed complete to wall & Ceiling or laid in floor complete all as specified and as directed.

S&F in repair 75mm dia outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC CARRIE twin flushing cistern 10 Ltr capacity low level snow white with inlet valve , float handle, inlet and out let connection,bend pipe as in repair.complete all as specified and directed. (Make :-Cera cat No B1020104 or equivalent as approved by GE)

S&F in repairs fancy type bib tap of cast copper alloys with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed for 15mm dia pipe inclduing removing the old unserviceable bib taps fixed complete all as specified and as directed.

S&F for oval shaped snow white vitreous china WHB table top fancy type of overall size 595 x 380 mm, Cat part No 7751 of cera or of equivalent make specified here-in-after including 32 mm CP waste coupling, PVC waste pipe etc complete, including granite slab counter of black colour as approved and of size 1.20mtr x 0.60 mtr including rounding edges etc complete cutting nitches rounding edges etc complete, horizontally supported by 01 No of 35 mm thick cuddappa stone slab one side mirror polished and vertically supported by 02 No 35 mm thick complete all as specified and directed (Make : Cera of cat no S2020132 or equivalent model in Hindustan Sanitary Ware Industries (1st quality) (Hindware only) / Parry Ware (Super fine) /Neyveli Ceramics (Neycer) (1st quality) as approved by GE)

S&F Pillars cock with swan neck spout left and areator for iron pipe complete all as specified and directed (Make : Cera of cat no F2007104 or equivalent model in Jaguar/Marc/ ESS-ESS as approved by GE)

S&F vitreous china wash down floor mounting EWC of snow white including fixing bolts etc with flat bottom including MS, CP or aluminium anodised hinges devices etc complete all as specified and directed. (Make : Cera of cat no S1050106 S trap or equivalent model in) Hindustan Sanitary Ware Industries (1st quality) (Hindware only) /Parry Ware (Super fine) as approved by GE

M&L for plastic water closet seat cover closed pattern with flat bottom ,and cover and mild steel chromium plated hinging device complete all as specified and as directed. (Make : Cera of cat no B1510103 or equivalent model in Hindustan Sanitary Ware Industries (1st quality) (Hindware only) / Parry Ware (Super fine) as approved by GE)

S&F in repairs Health faucet complete all as specified & directed. (Make :- Cera Cat No.F8030301 or equivalent model in Jaguar/Marc/ ESS-ESS as approved by GE.)

S&F in repairs CP toilet paper holder confirming to CAT No CAN-1151N of "Jaquar" or Equivalent make here in after.

S&F angle cock with wall flange and cup concealed type secrewed both ends for iron pipe or for unions and fixed in repairs of 15 mm dia complete all as specified & directed. (Make :- Cera Cat No F2007201 or equivalent model in Jaguar/Marc/ ESS-ESS as approved by GE.)

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc all as complete all as specified and as directed. (Note : Pipe will be laid under floor)

S&F stop valve chromium plated fancy type with long shank and cup (concealed type) cast copper alloy screwed down high pressure with capstan head or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete 15/20mm dia.complete all as specified and directed. (Make : Cera/Parryware as approved by GE)

S&F PVC connection 15mm size with PTMT nuts of length 450mmcomplete all as specified and directed. (Make : Cera/Parryware as approved by GE).

M&L for Vitreous China urinals, half stall type (back to corner wall type), complete including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. (Make : Cera of cat no S4020107 or equivalent model in Hindustan Sanitary Ware Industries (1st quality) (Hindware only) /Parry Ware (Super fine) as approved by GE)

S&F in repair 15mm dia brass self closing angle cock prismatic for urinal with wall flanges and 200 mm connecting pipe fixed complete all as specified and as directed. (Make : Cera of cat no F9020203 or equivalent model in Jaguar/Marc/ ESS-ESS as approved by GE)

S&F in repair urinal spreader of brass body chromium plated for fixing with 15mm dia pipe suitable for urinal complete all as specified and as directed. (Make : Cera of cat no F8070201 or equivalent model in Jaguar/Marc/ ESS-ESS as approved by GE)

S&F in repair steel grating 150mm size of ISI mark complete all as specified and as directed.

S&F in repair aluminium powder coated decorative type curtain rod 20mm dia complete all as specified and as directed

S & F aluminium powder coated brackets suitable for 20mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed

M&L for coloured precast cement concrete interlocking paver block of glossy finish any shape and size confirming to IS-15658-2006, 60mm thick, M-35 grade with grey cement and no pigment laid over & including 30mm thick stone dust/grit complete all as specified and as directed.

M & L for hand cut kota stone slab flooring 18-20 mm thick, over 20 mm thick cement screed base in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shed of slab including rubbing and polishing complete including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar complete all as specified and as directed.

All as per item No. 74.00 above but in riser of steps, skirting, dado and pillars etc. over 10 mm thick CM (1:4) backing coat , set and jointed in neat cement slurry and pointed in coloured cement to match with colour etc complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring complete all as specified and as directed.

Taking down shutters exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and as directed.

S&F pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S&F pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete as specified size of frame 125x60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F in repairs 17/18 mm thick PVC board, fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cupboard/ Pelmets fixed complete all as specified and directed.

S & F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished complete all as specified and as directed.

S & F Continuous (piano) hinges 30 mm width of flap,mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S & F for 100 mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw complete all as specified and as directed.

S&F Butt hinges 100mm medium weight cold rolled, mild steel complete all as specified and as directed.

S & F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S & F 300 mm ordinary rat rail pattern springs including roller and roller plate and fixed with chowkhat complete as specified and directed.

S&F wire netting of stainless steel wire 0.71mm dia, size of mesh 20mm fixed with tined tack of stainless steel wire staples complete all as specified and as directed.

M&L two coats synthetic enamelled painting over one coat of pink primer on new or previously untreated wooden surfaces of any descriptiion, not otherwise described over 10cm width or girth complete all as specified and as directed.

S & F in repair 25mm dia Curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. Make and design of bracket as approved complete all as specified and as directed.

S & F Machine cut cuddappa stone 25 to 30 mm thick both side polished bedded & jointed in CM (1 : 3) complete all as specified and as directed.

S & F in repair 15mm stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle of fancy type screwed both ends of, complete all as specified and directed.

Demolition & breaking up drain pipes PVC or AC set in CM or solvent 75/100/110 mm dia complete all as specified and as directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall of following size :-

110mm bore

75mm bore

S&F in repair PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 110 mm bore provided with access door complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 75 mm bore provided with access door complete all as specified and as directed.

S&F in repairs stainless steel sink 1.00 thick for kitchen or laboratory with plug waste pipe washers including cantilivers cast iron brackets connecting union etc over all size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L for preparation of old surfaces on wall and applying two coat of Oil Bound distemper white or tinted on wall complete all as specified and as directed.

Preparation of old painted wooden surfaces exc 10 cm width or girth and applying two coat of synthical enamel paint all as specified and directed

Taking down carefully copper/aluminium point wiring (light, fan ,socket or power) complete,including fixture and fittings such as switches,ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls ,floors etc

Taking down old unserviceable / worn out aluminium sub main of any type and size complete all as specified and as directed.

Taking dwn the existing unsv main switch/cutout/DB of any type/capacity/description and making good disturbed surfaces complete all as specified and directed

M & L for wiring complete with 1.5 sqmm single core FRLS grade PVC insulated unsheathed,1100V grade copper multistranded inexisting conduit & PVC insulated FRLS grade copper earth continuity conductor cable 1.5sqmm connected to common earth dolly including modular terminal boxes,frames for housing switches,sockets,regulators and cover plates ,sunken boxes made out of 1.2 mm thick GI sheet concealed in walls for housing the modular switches ,socket outlets ,fan regulators etc. all as specified for the following (Rate deemed to be inclusive of cutting chases for concealed conduit 20 mm dia for wiring and making good surface of wall to the existing surface & paint of wall)One light/one fan point controlled by one switch complete all as specified and as directed.

All as per item No. 107.00 above but One 5A, 3 pin switch socket outlet mutipurpose on independent board.

All as per item No. 107.00 above but one 5A, 3 pin switch socket out let on same board.

All as per item No. 107.00 above but one 5A, 3 pin socket outlet independent but below the switch board of light points in the same vertical plane .

All as per item No. 107.00 above but one bell point controlled by one switch

All as per item No. 107.00 above but one light point controlled by two nos of two way switches

All as per item No. 107.00 above but wiring complete with 4.0 Sqmm for 3 pin 15 A socket multipurpose on independent board.

S & F for Modular switch one way 6 Amps, 1 module complete all as specified.

S & F for Modular switch one way 16 Amps, 1 module, with neon indicator complete all as specified.

S & F for celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified.

S & F for modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F for Modular socket, 6 Amps, 2/3 pin combination 2 module complete all as specified.

S & F for Modular socket, 6/16Amps, 2/3 pin combination 2 module complete all as specified.

S & F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.

Supply and fix lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fittings.

Supply and fix LED LUMENO 5W E27 CDL Ball lamp. Make-Havells, code-/equivalent make of Phillips / Surya.

S&F in LED Light fittings 1x20W,220VAC decorative box type with driver, holder incl LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F in repair fan capacitor 2.5 Mfd suitable for 1200/1400mm sweep ceiling fan complete all as directed. (Make-Havells/Crompton/Usha)

Supply & fix ventilating fans AC single phase 230/ 240 V of size 250 mm sweep with louver complete all as specified and as directed. (Make-Havells,Model-Ventil Air - DX White)

Supply fix MCB DB of sheet metal enclosure double door SPN 8 way with 200 Amps rated bus bar 230 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

S & F MCB SPN 415 Volts, 40-63 Amps 50 Hz ,C series breaking capacity 10KA all as specified and directed.

S & F MCB SP 6- 32Amps, 240 V,50 HZ, C series breaking capacity 10KA all as specified and directed.

S&F in repairs Oval plastic bulk head LED luminaire 10Watt, 6000K with IP 65 Protection conforming to Model : STUD,LBHE-10-CDL Make Crompton or equivalent model in Bajaj / Havells / Phillips complete all as specified and as directed.

Supply, fixing and testing LED IP 66 Street light luminarie of 70 Watt with suitable size bracket high power LED as light source and electronic driver for 70 Watt LED 6000K including mounting including taking out old unserviceable one and fixing new fittings on wall complete all as specified and directed. (Make : Havells Cat Part No. ENDURAPEARLPLUSSL70WLED757SASYTOPC or equivalent in BAJAJ /Crompton/Surya)

Supply and fix LED flood light 120 watt ,230 volt, AC outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and Lamp Pressure die cast housing with IP 65 protection, heat resistant toughtened clear glass with frame complete with accessories , pre wired up to a terminal block and mounting attachment complete all as specified .

Excavating in trenches not exceeding 1.5 meter in wide and not exceeding 1.5 meter depth and getting out in hard/Dense soil complete all as specified and as directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all specified and as directed.

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and as directed.

M&L for galvanised tubing 50 mm med grade with all fittings laid in trenches complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core complete all as specified and as directed.

M&L for laying of Reinforced concrete pipes,class NP2 with one collar per lengh of pipe of dia 100 mm ,2 nos half round ( for bottom and top )and before laying exacaved area shall be leveling complete all as specified and directed

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6.0 Sqmm nominal area and drawing into PVC non metallic rigid PVC casing caping including one run of PVC insulated 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. (Note:- Three runs of 6.0 sqmm cable and one run of PVC casing caping will be measured as one unit all as specified and as directed.)

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 4 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. (Note:- Three runs of 4.0 sqmm cable and one run of PVC conduit will be measured as one unit all as specified and as directed)

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in and including heavy duty in concealed,PVC conduit including all accessories etc.,heavy duty ISI marked,mild steel concealed sunken boxes,1.6 mm thick and 60 mm depth with earth dolly duly painted with two coat of black bituminious paint over a coat of red oxide primer with laminated bakelite sheet of min. thickness of 3mm suitable for switches/sockets,etc,including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for One light / one Fan point controlled by one switch:- (Note:- Making good of disturbed surfaces will be done by contractor without any claims. Cutting chases and making good disturbed surfaces is included in unit rate.)

All as per item No. 140.00 above but for One 5A 3 pin switch socket outlet on same board complete all as specified and as directed.

All as per item No. 140.00 above but for One 5A 3 pin switch socket outlet mutipurpose on independent board complete all as specified and as directed.

All as per item No. 140.00 above above but wiring complete with 4.0 Sqmm for 3 pin 15 A socket multipurpose on independent board complete all as specified and as directed.

Supply anf fix switch piano flush button type 5 amps SP one way complete all as specified and as directed.

Supply anf fix switch piano flush button type 15 amps SP one way complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 Pin 5 Amp flush type 240 volts complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 Pin 5 /15Amp flush type 240 volts complete all as specified and as directed.

S & F for step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

M&L for Exhaust fan 450mm sweep,230 volts metal body & frame with blades and louvres fixing on wall complete with nut bolts incl duct for exhaust complete all as specified and as directed.

M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009

S&F LT UG cable 35 Sqmm 3.5Core, 1100V laid in trenches, walls/floor all as specified and directed

S&F vertical 8 way TPN double door recess mounted/wall mounted MCCB's as incommer is 3 pole V-Tec of 100 amps rating & 16 KA breaking capacity MCCB is pre fitted at factory & including price of MCCB all as directed and specified by Engr in Charge Cat Part No DBVTH004SD L&T equivalant to Havells/Legrand all as specified and as directed. (Note : Making good disturbed surface and finishing the surface as per existing to match the colour)

Supply, fixing and testing LED street light fitting 35W, 230V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, Lamp bracket with impact and corrosion resistant incl thermal management in multiple optics complete with IP 65/66 I with suitable size bracket hcomplete all as specified and directed.

TRINITY ENGINEERS

REKHA ELECTRICALS

Raj Construction Company

SARATH ENTERPRISES

Suma Construction

M/S Sandeep Enterprises

Gauri Associates

TULSAYA CONSTRUCTION