Construction of public toilet and other miscellaneous civil work in BARC Staff Colony Tarapur for the year 2023 2024.

Amount

Lead charges for lead exceeding 1 KM but Nost exceeding 2 KM, by mechanical transport including loading, unloading, stacking / levelling etc. (a) for soil

Murum filling under floors of specified thickness in layers of not more than 150 mm thickness including supplying required materials and consolidation etc. complete (Murrum to be brought from out side campus of BARC)

Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge. 230mm With outside material

Providing and laying in position cement concrete of 1:2:4 (1cement, 2 crushed sand, 4 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels and as directed by the engineer.

Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level

Provding and constructing brick work in Cement mortar using standard bricks of approved class/ quality, make or brand in foundation and plinth including curing, raking out joints, simultaneous pointing below plinth level if specified, complete as per drawings, specifications and as directed by the Engineer-incharge Brick work in C.M 1:6 using crushed sand.

Providing and constructing Half brick masonry using bricks of approved quality / class, brand/ make in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications and as directed by the Engineer-incharge but excluding reinforcement up to plinth level and as directed by engineer. (Reinforcement will be paid under relevant item)

Providing 20 mm thick water proof plastering in cement mortar 1:3 (using crushed sand) finsihed smooth with a floating coat of neat cement including approved water proofing compound added @ 2% by weight of cement or as per manufacturer's specifications, sieving of sand to required fineness, preparation of surface, scaffolding at all heights, curing all as per specifications, drawings and as directed at site.

Providing 15 mm thick Internal plaster in cement mortar 1:4 without cement punning (using Crushed Sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.

Providing and fixing 1st quality ceramic glazed / Anti skid floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness Nost less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness Not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing Marble work using marble (Polished and machine cut) of minimum thickness 18 mm for wall lining (Veneer work) in C.M 1:3 (using crushed sand) including pointing with white cement mortar 1:2 (Using Marble dust) with an admixture of pigment to match the marble shade ,To be secured to the backing by means of cramps, all as per specifications and as directed by the Engineer-in-charge Udaipur Green Marble slab using crushed sand

Providing and fixing white vitreous china flat back half stall urinal size 580x380x350 mm / 610 mm of approved make Aquaseal model with Push cock of approved make,with CP brass flush pipe unions, heavy quality C.P. brass spreaders, C.P waste coupling with dome grating, clamps complete all as per specifications drawings and as directed by the Engineer-incharge.

Providing and fixing Indian water closet (Orissa pan) size 580 x 440 of apperoved make with 100 mm white vitreouws China ware P or S trap, connection pipe from flushing cistren to W/C pan One Nos. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures, bracket of flushing cistren complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge.

Providing and fixing viterious white colour 630 x 450 mm China wash basin of approved make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600/1000mm long PVC Inlet connection, PVC flexable pipe, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge.

Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make with bevelled edges complete with 6 mm thick plywood sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge.

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) and as directed by EIC Colour anodized aluminium section (minimum anodizing thickness of 15 micron)

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) with tinted colour float glass of 5 mm thickness.

Providing and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws 30 mm thick panelled door type of approved colours including the cost of ISI marked 100 mm heavy quality stainless steel butt hinges with necessary screws.

Providing and fixing 15 mm dia C.P brass heavey quality bib cock of approved specified make as per specification and as directed by the Engineer-in-charge

Providing and fixing 15 mm n.b C.P Brass concealed stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge

Providing and fixing Chlorinated Polyvinyl chloride(CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & GI threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer In Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm dia

Providing , Laying , jointing, fixing and testing Heavy quality (CClass) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge. Pipes with exclusive use of TATA make C-Class pipe 20 mm dia G.I pipe

Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 Nos 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in-charge

Providing and fixing 100 mm dia S.S. jali of approved make or as directed by engineer in charge

Providing and fixing 40 mm dia CPVC pipe 6kg/cm2

Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 type A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. 110 mm Dia bend 87.50 Deg

Providing and fixing precoated Galvalume Roofing profile sheets of approved size, shape and pitch up to and including single length of 12.00 met. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 X 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by the Engineer-incharge sheet for shed surrounding

Providing and constructioning inspection chamber of internal size clear diamention of 900x600 mm in 230 thk. Brick masonary with cenent morter 1:4 over a bed of 150 mm thk. 1:4:8 cement concrete foundation, plasreting with cement morter 1:4 20mm thk. On inside, out side and all exposed surface finished with a floating coat of neat cement brick cornelling at top to provide oprning of 900x450mm embedding the frame and cover with CC 1:2:4 concrete, and fixing cast iron steps if necessary at 300mm intervels complete.depth of chamber not exceeding 900mm (excavtion, soling cast iron cover and ci steps will be paid seperatly under relavent item

Providing and fixing square mouth S.W. gully trap complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size gully trap "P" type

Providing and Painting with 1st quality acrylic washable distemper (ready made) with Two coats on Old/ new work of approved make and manufacturer and of required shade and colour, including scaffolding, preparation of the surface etc., including a coat of approved cement primer.as per manufacturer's specifications and as directed by the Engineer-incharge.

Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge

Providing, painting, finishing walls with two coats of anti-algae, weather proof acrylic smooth emulsion paint of approved make with silicon additives on sand face plaster/ plain plaster & concrete surfaces of required shade over new work over a base coat of exterior cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge..

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge Up to and including 300 mm Joists, 350 mm channels, and below sections using materials from Approved vendor of BARC

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor using TMT bars of specified grades of all sizes. TMT bars to be supplied by the contractor from the own plants of SAIL, RINL or TATA make only using virgin materials

Providing and fixing at all levels precast members using cement concrete of Grade M-30 in copings and / or bed blocks, plain window sills, shelves, louvers, steps, staircases, trench covers, drain covers etc. including hoisting and setting in position with C.M 1:3 (using crushed sand) cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (using crushed sand) on exposed surfaces complete as per specifications and as directed by the Engineer-in-charge

Providing , centering ,shuttering Form work using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels

a) substructure

b) superstructure

Providing, hoisting and installing at required elevation moulded HDPE cylindrical vertical water storage tanks of approved make of the following capacities with suitable S. M. C cover at top including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow, providing and fixing necessary G.I Nipples ranging from 15 mm to 50 nn n.b of average150 mm length with double check nuts, washers etc. complete as directed by the Engineer-in-charge HDPE CYLINDRICAL vertical storage water tank 500 lit capacity

Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Providing and Fixing 3.00 mm thick Homogeneous antiskid PVC sheet / tile in flooring and skirting of aproved make in approved pattern on a smooth and damp prrof base using rubber based adhesive of approved quality and manufatrer like Dunlop-S -758, Fevicol SR 998, PolyGrip SP or equivalent including levelling small undulations with plasterof paris if required, rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade

Providing and fixing hand rail using 304 grade Stainless Steel pipes of approved size and make and quality by welding, mirror/ matt polishing, fixing at site etc. for balcony railing & staircases railing including special sections as per drawings, specifications. complete as directed by the Engineer-in-charge

Dismantling barbed wire / flexible wire rope in fencing including making rolls and stacking within 100 m lead

Providing and fixing iron galvanised Tata Gi 2 spike barbed wire having dia.2mm to 2.5mm and barb length 25mm fixed in Y armed including Gi coating etc completd and as directed by engineer incharge. With G.I. barbed wire 12 swg

Providing and fixing concertina barbed tape coil of follwoing dia. made from M.S galvanized ribbon tape of 0.5 mm thickness, 19 mm width stretching the coil to 9 m approximate, fixing the coil with clips between "Y" armed and MS angle posts 2.44 m high from ground level, including supplying and fixing MS galvanized clips etc. complete as per manufacturer's specification including painting by dipping method the concrtina tape coil with two coats of synthetic enamel paint of approved shade and make over a coat of approved primer at fabrication shop, before bringing the material to the site and fixing in position etc. complete as directed by the Engineer-in-charge. 450 mm Dia Concertina coils

Providing and fixing GI chain link fabric fencing Made of GI wire of dia 4 mm of required width in mesh size 50 x 50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as requeid complete as per direction of Engineer-in-charge.

Providing, supplying and fixing gear box complete set with gear chakkar 14',warm 8'gear box 8x8,gear handle 12'' new pigra 10'x25.5 patti ring,pipe 25mm round pipe, round pipe 40mm pigra, to Existing Rolling shutter to shop in shopping complex etc full assembly complete including erection

Providing and fixing FRP porta cabine inbuild with rolling shutter having size( 10x 10)feet & 8 feet(lenghtx widthx height) with provision of light , fan and window for ventilation of approved brand as directed by EIC.

Providing errection and installation of MS Scaffolding material for required area of 10m wide x15 m high of tata make or other equivalent brand, heavy duty material as directed by EIC.

H-frame(2.0mx1.0m)

Cross Bracing 2.5mx1.5m

Platform 2.5mx 400mm wide

Swivel couplers

Adj.base plate 350mm

Providing and fixing of GFRP top cover for Gully trap pit,electrical pit and inspection Chamber cover for various location of Colony building including adjustment of cover by chipping and repairing ETC completed as directed by EIC.

GFRP cover size (300x300)mm

GFRP cover size (600x1200)mm

Providing and fixing the 3-D glossy finish alphabet letters of height 12 inches and 1.5 inch thick made from Stainless steel (grade 304) in Hindi Devnagari and English script in approved font , style on front face of the walls of public buildings in BARC Staff Colony as per Specifications . and as directed by Engineer In Charge .

Providing and fixing 3 seater precast RCC modern look seating bench without arm rest but with back as per the design having 1530 mm lenghth and 600 mm width and approved finish with approved anti corrosive ,water resistant glossy fininish colour displaying name of NRB , Tarapur along with departmental LOGO in Hindi and english language for outdoor garden areas at different location in BARC staff colony as per specifications and as directed by Engineer In Charge .

BUDHRANI BUILDERS PVT LTD

M/s. KHUSHBU ENTERPRISE

M/s.Bhushan J Pawade

M/s. P.N.MORE

M/S DATTATRAY CONSTRUCTION